Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
doi	https://doi.org/10.52842/conf.acadia.2012.127
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_109
id	acadia12_109
authors	Comodromos, Demetrios A ; Ellinger, Jefferson
year	2012
title	Material Intensities
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 109-113
doi	https://doi.org/10.52842/conf.acadia.2012.109
summary	As host organizers of the Smartgeometry 2012 Conference, professors of Architecture, and as principals in design firms, our work aims to use as a productive resistance the notion of Material Intensity described below as both a foil and measure to current concepts of simulation and intensive modeling in architectural computation. The holding of SG 2012 aimed to stage this resistance in the form of workshop, round-table discussions, lectures and symposia, with the outcome attempting to define a new synthetic notion of material intensities in modes of architectural production. This paper aims to form the basis of a continued exploration and development of this work. In summary we focused on: 1-Intensive thinking as derived from the material sciences as an actual and philosophical framework that emphasizes qualitative attributes, which is likened to behavior, simulation, and dynamic modeling. Extensive attributes lead to analytical, representational and static modeling. 2-Material practices can also be formed and as a result of this method of thinking. As demonstrated by the glasswork of Evan Douglis, ‘paintings’ by Perry Hall—the managed complexity possible by working with materials during intensive states of change allow for scalar, morphological and performative shifts according to a designer’s criteria. 3- Although both are necessary and actually complement each other, architects need to ‘catch-up’ to intensive thinking in process and modeling strategies. Our methods rely on static modeling that yield often complicated frameworks and results, wherein accepting methods of dynamic modeling suggests the capacity to propose complex and nuanced relationships and frameworks.
keywords	Material Intensities , Intensive Thinking , Material Practice
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:56

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	acadia12_177
id	acadia12_177
authors	Mankouche, Steven ; Bard, Joshua ; Schulte, Matthew
year	2012
title	Morphfaux: Probing the Proto-Synthetic Nature of Plaster Through Robotic Tooling
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 177-186
doi	https://doi.org/10.52842/conf.acadia.2012.177
summary	Morphfaux is an applied research project that revisits the virtually lost craft of plaster to explore its potential for producing thickened architectural environments through the use of contemporary digital technology. The research challenges the flatness of modern, standardized dry wall construction and explores plaster’s malleability as a material that can be applied thick and thin, finished to appear smooth or textured, and tooled while liquid or cured. If the invention of industrialized modern building products such as drywall led to the demise of the plasterer as a tradesperson, our research seeks alliances between the abilities of the human hand and those of automation. By transforming historic methods using new robotic tools, Morphfaux has broadened the possibilities of architectural plaster. While our research has produced forms not possible by human skill alone, it also clearly illustrates a symbiotic relationship between the human body and robotic machines where human dexterity and robotic precision are choreographed in the production of innovative plastering techniques.
keywords	Digital Practice , Robotic Fabrication , Digital Craft , Tacit Knowledge , Material Resistance , Synthetic Material , Plaster , Variable Tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	acadia12_187
id	acadia12_187
authors	Mei-Ling, Lin ; Han, Ling ; Kothapuram, Shankara ; Jiawei, Song
year	2012
title	Digital Vernacular
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 187-195
doi	https://doi.org/10.52842/conf.acadia.2012.187
summary	Digital Vernacular investigates the potential of the process of depositing a paste like material with precision using a CNC device which has produced an innovative system for design and fabrication of environmentally responsive housing. Architectural practice has been greatly impacted by technical innovations in the past, usually new building types emerge as part of new ideologies. Yet the current revolution in computer-aided design and fabrication has architecture focusing on form – without questioning what these new processes can bring for the masses. The research project 'Digital Vernacular' has investigated the potential of using CNC technology for the production of housing. It has focused on the design of the machinic devices as well as computational design tools, and revolves around the concept of fabrication on site. Using an additive and layered manufacturing process and locally available material, the project proposes a revolutionary new digital design and fabrication system that is based on one of the oldest and most sustainable construction methods in the world. The main potentials of this method are not to create complex forms for the sake of design, but to use parametric control to adapt each design to the specificities of its site. Using geometrical rules found during many research experiments with real material behaviour, a new architectural language is created that merges several environmental functionalities into a single integrated design.
keywords	Digital , Vernacular , CNC , CAM , Housing , fabrication , environmental
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	acadia12_79
id	acadia12_79
authors	Nicholas, Paul ; Tamke, Martin ; Thomsen, Matte Ramsgard ; Jungjohann, Hauke ; Markov, Ivan
year	2012
title	Graded Territories: Towards the Design, Specification and Simulation of Materially Graded Bending Active Structures"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 79-86
doi	https://doi.org/10.52842/conf.acadia.2012.079
summary	The ability to make materials with bespoke behavior affords new perspectives on incorporating material properties within the design process not available through natural materials. This paper reports the design and assembly of two bending-active, fibre-reinforced composite structures. Within these structures, the property of bending is activated and varied through bespoke material means so as to match a desired form. Within the architectural design process, formal control depends upon design approaches for material specification and simulation that consider behavior at the level of the material element as well as the structure. We describe an evolving approach to material specification and simulation, and highlight the digital and material considerations that frame the process.
keywords	graded materials , composite materials , bending-active structures , material properties , material behaviour , simulation , material specification , performance-based design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_93
id	ecaade2012_93
authors	Nicholas, Paul; Tamke, Martin
year	2012
title	Composite Territories: Engaging a Bespoke Material Practice in Digitally Designed Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 691-699
doi	https://doi.org/10.52842/conf.ecaade.2012.2.691
wos	WOS:000330320600074
summary	Today, material performance is regarded as one of the richest sources of innovation. Accordingly, architecture is shifting to practices by which the computational generation of form is directly driven by material characteristics. At the same time, there is a growing technological means for the varied composition of material, an extension of the digital chain that foregrounds a new need to engage materials at multiple scales within the design process. Recognising that the process of making materials affords perspectives not available with found materials, this paper reports the design and assembly of the fi bre reinforced composite structure Composite Territories, in which the property of bending is activated and varied so as to match solely through material means a desired form. This case study demonstrates how one might extend the geometric model so that it is able to engage and reconcile physical parameters that occur at different scales.
keywords	Composites; Material properties; Multi-scale
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_52
id	ecaade2012_52
authors	Thomsen, Mette Ramsgard; Bech, Karin; Sigurdardottir, Kristjana
year	2012
title	Textile Logics in a Digital Architecture
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 621-628
doi	https://doi.org/10.52842/conf.ecaade.2012.2.621
wos	WOS:000330320600067
summary	This paper questions the representational logics of a new class of digital-material practices incorporating material performance. Presenting the concept of ‘textile logic’, the paper discusses how computational design tools that allow for a parametrisation of material behaviour are foregrounding the examination of structural principles that lie outside traditional compressive logic. By pointing to the structural thinking of Vladimir Shukhov, Buckminster Fuller and Robert Le Ricolais, as well as contemporary practitioners such as Cecil Balmond and Peter Testa the paper examines the precedents for incorporating tensile self-bracing as a structural principle and how textiles can become a model for architectural design. The paper presents the research by design enquiry ‘Shadow Play’ examining the involved traditions, methods and material practices of textile design and the here embedded systems of material specification can be advantageously ported to digital design.
keywords	Digital design practice; textiles; structural design; material behaviour
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia20_58
id	acadia20_58
authors	Yogiaman, Christine; P. Pambudi, Christyasto; Kumar Jayashankar, Dhileep; Chia, Peizhi; Quek, Yuhan; Tracy, Kenneth
year	2020
title	Knitted Bio-Material Assembly
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 58-65.
doi	https://doi.org/10.52842/conf.acadia.2020.1.058
summary	Bio-fabrication of materials opens up novel opportunities for designers to innovate the functional possibilities of the designed output through variations in fabrication processes. Literature has seen an increased interest in this emerging material design practice that has recently been defined as “growing design” (Myers 2012). Our research work expands on the definition of this emerging material design practice to engage digital design and fabrication procedures in the intersection of biology, craft, and design. The aim is to cultivate a new material type—knitted textile mycelium composite that has the capability to augment final material composite properties and provide formal freedom to designers. 3D CNC knitting enables the fabrication of knitted textile that has control over the specificity of each knit loop, opening up design possibilities to grade functional differentiation when the knitted textile is used as a sacrificial mold for the cultivation of mycelium composite. The research presents various design-to-fabrication workflows that facilitate working with the indeterminate nature of 3D-knitted membrane and the dynamic nature of cultivating mycelium composite growth. Two architecture-scale prototype units were fabricated and cultivated, demonstrating the range of design freedom for this new material type.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
doi	https://doi.org/10.52842/conf.caadria.2012.527
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201210303
id	ijac201210303
authors	Bohnenberger, Sascha; Chin Koi Khoo, Daniel Davis, et al.
year	2012
title	Sensing Material Systems - Novel Design Strategies
source	International Journal of Architectural Computing vol. 10 - no. 3, 361-375
summary	The development of new building materials has decisively influenced the progression of architecture through the link between built form and available material systems. The new generation of engineered materials are no exception. However, to fully utilise these materials in the design process, there is a need for designers to understand how these new materials perform. In this paper we propose a method for sensing and representing the response of materials to external stimuli, at the early design stage, to help the designer establish a material awareness. We present a novel approach for embedding capacitive sensors into material models in order to improve material performance of designs. The method was applied and tested during two workshops, both discussed in this paper. The outcome is a method for anticipating engineered material behaviour.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_016
id	ascaad2012_016
authors	Bourbia, Fatiha ; Yasmina Bouchahm and Ouarda Mansouri
year	2012
title	The Influence of Albedo on the Urban Microclimatic Street Canyon
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 159-169
summary	In city, when temperatures run higher than those in suburban and rural areas, this generate a phenomenon called Urban Heat Island (UHI), this effect occurs, primarily because growing numbers of buildings have supplanted vegetation and trees. The main causes of the different microclimatic conditions in cities are linked among other parameters to urban geometry which influences incoming and outgoing radiations as well as surface material properties, such as color and texture. In hot climates the elevated surface temperatures of materials directly affect, not only the urban microclimate, but also thermal comfort conditions in urban open spaces. In order to evaluate the microclimate variation of urban street canyon compared to the variation of walls and ground surfaces materials, series of field simulation are used by software tool , Envi-met v3.0, in down town of Constantine, Algeria.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_016.pdf
last changed	2012/05/15 20:46

_id	acadia12_325
id	acadia12_325
authors	Chronis, Angelos ; Tsigkari, Martha ; Davis, Adam ; Aish, Francis
year	2012
title	Design Systems, Ecology, and Time Angelos Chronis, Martha Tsigkari, Adam Davis, Francis Aish"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 325-332
doi	https://doi.org/10.52842/conf.acadia.2012.325
summary	Discussion of architecture in ecological terms usually focuses on the spatial and material dimensions of design practice. Yet there is an equally critical temporal dimension in ecology that is just as relevant to design. At the micro scale is the question of 'real time' feedback from our design systems. At the macro scale is the issue of sustainability, in other words long term -- and potentially disastrous -- feedback from terrestrial ecosystems. In between are numerous different units for quantizing time in design and computation. In this paper, we examine some of these units -- 'real time', 'design time', 'development time' -- to suggest how they interact with the ecology of design technology and practice. We contextualize this discussion by reference to relevant literature from the field of ecology and to our work applying custom design and analysis tools on architectural projects within a large interdisciplinary design practice.
keywords	real time feedback , performance driven design , integration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia23_v3_115
id	acadia23_v3_115
authors	Dade-Robertson, Martyn
year	2023
title	Designing with Agential Matter
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	There have been, very broadly, three eras in the understanding of matter in design. The first, associated with an Aristotelian view of matter as inert and as a receptacle of form, has dominated many of the formalisms in Architectural Design from the Renaissance through to Modernism. The second, sometimes described as “new materialism” (Menges 2012), considers matter as active through design processes which work with materials’ inherent tendencies and capacities. This has led to now-familiar design methods, including Material Based Design Computation (Oxman 2009), and many experiments with active materials such as bilayer metals and hygromorphs. These materials can be programmed to respond to their environments and often take inspiration from biology. I want to suggest that we are entering a new era of understanding matter, which I refer to as the “agential era.”
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

For more results click below: