Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
doi	https://doi.org/10.52842/conf.acadia.2012.209
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2023_259
id	ecaade2023_259
authors	Sonne-Frederiksen, Povl Filip, Larsen, Niels Martin and Buthke, Jan
year	2023
title	Point Cloud Segmentation for Building Reuse - Construction of digital twins in early phase building reuse projects
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 327–336
doi	https://doi.org/10.52842/conf.ecaade.2023.2.327
summary	Point cloud processing has come a long way in the past years. Advances in computer vision (CV) and machine learning (ML) have enabled its automated recognition and processing. However, few of those developments have made it through to the Architecture, Engineering and Construction (AEC) industry. Here, optimizing those workflows can reduce time spent on early-phase projects, which otherwise could be spent on developing innovative design solutions. Simplifying the processing of building point cloud scans makes it more accessible and therefore, usable for design, planning and decision-making. Furthermore, automated processing can also ensure that point clouds are processed consistently and accurately, reducing the potential for human error. This work is part of a larger effort to optimize early-phase design processes to promote the reuse of vacant buildings. It focuses on technical solutions to automate the reconstruction of point clouds into a digital twin as a simplified solid 3D element model. In this paper, various ML approaches, among others KPConv Thomas et al. (2019), ShapeConv Cao et al. (2021) and Mask-RCNN He et al. (2017), are compared in their ability to apply semantic as well as instance segmentation to point clouds. Further it relies on the S3DIS Armeni et al. (2017), NYU v2 Silberman et al. (2012) and Matterport Ramakrishnan et al. (2021) data sets for training. Here, the authors aim to establish a workflow that reduces the effort for users to process their point clouds and obtain object-based models. The findings of this research show that although pure point cloud-based ML models enable a greater degree of flexibility, they incur a high computational cost. We found, that using RGB-D images for classifications and segmentation simplifies the complexity of the ML model but leads to additional requirements for the data set. These can be mitigated in the initial process of capturing the building or by extracting the depth data from the point cloud.
keywords	Point Clouds, Machine Learning, Segmentation, Reuse, Digital Twins
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2012_216
id	sigradi2012_216
authors	Atenas, Bárbara; Rojas, Francisco; Rojas, Jorge
year	2012
title	Realidades Cruzadas y su aplicación en el Diseño Industrial [Industrial Design aplication of Mixed reality]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 598-601
summary	This research seeks to establish guidelines for a model to take advantage of AR as a tool in the process of developing new products in the formative stages of the design professional. For this it is necessary to determine in which part of the design process the use of these guidelines creates a greater impact in terms of time, money and results, later to define relationships between the guidelines found and generate schemes to visualize relationships, delivering a tool that can be used by students in their design processes.
keywords	Augmented Reality, Design, Education, Industrial Design, Design Process
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_022
id	ascaad2012_022
authors	Borham, Ahmad; Lobna Sherif and Osama Tolba
year	2012
title	Resilient Rules - Culture and Computation in Traditional Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 211-221
summary	This study explores the influence of the socio-cultural rules, based upon Islamic jurisprudence (fiqh), on the complexity of the traditional built environment. This system of rules organized the societal activities, including decisions and activities related to design and construction in the Arab-Islamic city. Considering the city as a complex system, the study will try to show how this rules system made the Arab-Islamic city resilient and adaptive. Complex Adaptive Systems (CAS) are non-linear, self-organizing systems that have the ability to adapt to changing conditions through changing the rules that organize the random autonomous interactions between agents in the environment. This adaptation takes place through gradual gained experience that is reflected in the behavior of agents. This study attempts to interrelate different bodies of literature (Complexity/Chaos theory and built environment studies) in a single framework that aims to show that the socio-cultural rules system based on fiqh was a major factor in the resilience of the traditional built environment. These interrelations are illustrated using a graph called Computational Rules Graph (CRG). The CRG relates the traditional rules system to attributes of complex systems in a graph that can be modeled computationally. Traditional rules (codes of conduct) are proscriptive (non-deterministic), defining what is prohibited, thereby producing autonomous environments where agents had control over their immediate environment. In comparison, contemporary rules of the built environment (building codes) are prescriptive (deterministic), subscribing definite actions that need to take place by the stake-holder (agent) neglecting user needs and preferences. The application of these traditional rules system increased the agent’s autonomy and freedom of action. It also helped establish stronger social networks among agents, which resulted in a resilient environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_022.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_100
id	ecaade2012_100
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2012
title	Real-Time Robot Simulation and Control for Architectural Design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 479-486
doi	https://doi.org/10.52842/conf.ecaade.2012.2.479
wos	WOS:000330320600050
summary	Industrial robots for architectural fabrication have not yet been directly linked to the design process, as current research focuses mostly on the automated generation of robot control data for mass customization. In this paper, we will discuss the use of a real-time programming environment for robot simulation/control and introduce a virtual robot, that allows architects to digitally prototype fabrication processes. While such a real-time approach is also suitable for mass customization, the main advantage is that this interaction with the virtual-robot can be used to intuitively solve complex fabrication problems.
keywords	Industrial Robots; Inverse Kinematics; Virtual Robot; Mass Customization; Simulation; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201210206
id	ijac201210206
authors	Chernyakova, Irina; Mariel Villeré, Federico Casalegno, Leonardo Giusti and Zoe Schladow
year	2012
title	Civic Media Platforms and Participatory Urbanism: A Critical Reflection
source	International Journal of Architectural Computing vol. 10 - no. 2, 253-274
summary	In this paper, we explicate our research on technology-mediated urban experience specific to two hyper-local tests in which the space of the ‘public’ is transformed into a virtual network by connective broadcasting. The first case study presents collective mapping in Rio de Janeiro toward increased civic engagement and sustainability, the second tests documentation of political demonstrations for strategic and archival purposes for Occupy Boston. Grouped under the term “participatory urbanism,” the projects intend to explore how an individual activates interstitial space (between the physical city and hovering networks, between public and private) by engaging technology and civic media to affect change in the built environment. The physical and virtual environments serve as reciprocal sources of information, engendering a collective practice of shared encounters. We investigate how such encounters of user-centered activity through mobile and web-based media support or implicate the perception and manipulation of the built environment over spans of time and locations, and will highlight qualitative elements of a mobile and web platform designed for successful civic engagement and participatory urbanism.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_302
id	ecaade2012_302
authors	Colakoglu, Birgül; Durmisevic, Elma; Pasic, Adnan
year	2012
title	International Collaborative Design Studio: Green Transformable Buildings
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 107-114
doi	https://doi.org/10.52842/conf.ecaade.2012.2.107
wos	WOS:000330320600010
summary	Current trends in architectural practice such as an increased focus on sustainable design, integrated design, and the globalization of architecture are increasing the need for practitioners that are skilled in collaboration. Collaboration fosters innovation and creativity. It is a key operating principle for the 21st century and an important skill that an architecture student must be exposed to. The change in knowledge generation and creative problem solving is transforming education towards collaborative learning forcing architecture and engineering schools to address new course structures with “collaborative” aspect. The work presented in this paper draws its base from collaborative design learning. It describes an international collaborative design studio titled “International Design Studio: Green Transformable Buildings” conducted between three institutions, Y_ld_z Technical University (YTU)–Istanbul, University of Twente (TU)-Enschede Engineering Sciences and Industrial Design School, and Architecture Faculty of Sarajevo (AFS).
keywords	Collaborative design; collaborated learning; team work; design process
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
doi	https://doi.org/10.52842/conf.caadria.2015.765
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_037
id	cf2015_037
authors	de Vries, Bauke; Grond, Manon and van der Zee, Aant
year	2015
title	Development of a multi-disciplinary university wide design course
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 37-46.
summary	Design is one of the basic skills of every engineer. However until now design is only seen as a core course in Architecture studies and lately in Industrial Engineering studies. This paper reports about the development of a design course for all departments of a typical technical university. After a short overview of design teaching tradition, an inventory is presented of the different interpretation of design by the various departments. The course development is presented over two periods: 2012-2014, and 2014-2015. In between a major change was conducted. The course learning goals and student evaluations are presented. In the discussion we reflect on fundamental and practical problems that occur in design teaching for such a wide audience. Finally we draw conclusions on the changing role of design what is needed to give design the same status as mathematics in a technical curriculum.
keywords	Design, Design teaching, Multi-disciplinary design
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2012_60
id	ecaade2012_60
authors	Dierichs, Karola; Menges Achim
year	2012
title	Material and Machine Computation of Designed Granular Matter: Rigid-Body Dynamics Simulations as a Design Tool for Robotically-Poured Aggregate Structures Consisting of Polygonal Concave Particles
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 711-719
doi	https://doi.org/10.52842/conf.ecaade.2012.2.711
wos	WOS:000330320600076
summary	Loose granulates are a relevant yet rarely deployed architectural material system. Their significance lies in their capacity to combine fluid-like amorphousness with solid-like rigidity, resulting in potential architectural structures capable of continuous reconfi guration. In addition aggregates allow for functional grading. Especially if custom designed concave particles are used, full-scale architectural structures can be poured using a six-axis industrial robot, combining the precise travel of the emitter-head with the self-organizational capacity of granular substances. In this context, the paper proposes Rigid-Body Dynamics (RBD) simulations as a design-tool for the robotic pouring of loose granular structures. The notions of material and machine computation are introduced and RBD is explained in greater detail. A set of small tests is conducted to investigate the advantages and disadvantages of a specifi c RBD software. Conclusively, further areas of research are outlined.
keywords	Material and machine computation; aggregate architectures; designed granulates; robotic pouring; Rigid-Body Dynamics
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_383
id	acadia12_383
authors	Feringa, Jelle
year	2012
title	Implicit Fabrication, Fabrication Beyond Craft: The Potential of Turing Completeness in Construction"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 383-390
doi	https://doi.org/10.52842/conf.acadia.2012.383
summary	This paper addresses the limited shared vocabulary of landscape architecture and architectural design, evident in the application of terms such as “spatial design” and “spatial planning.” In their current usage, such terms emphasize the visible, terrestrial, pedestrian-perspective level, often to the absolute exclusion of a spatial, i.e., volumetric comprehension of the environment. This deficit is acutely evident in the teaching of landscape architecture and architecture and discussion of these fields’ shared ground. The dominant document type for mapping such analysis and design is the plan, or three-dimensional representations of the same, restricted to an extrusion or height map. GIS techniques in spatial design tend to be weighted toward visual, surface-based data (slope analysis, exposure, viewshed, etc.). Within this domain, our goal is to transform aspects of the intangible—the characteristics of open space itself—into a form that is legible, quantifiable, and malleable.
keywords	evolutionary fabrication , computer vision , robotics , self-assembly , stigmergy
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	sigradi2012_229
id	sigradi2012_229
authors	Fernández, Luciano; Lecaros, Denis
year	2012
title	Computer Vision aplicado a la evaluación de prototipos físicos [Computer Vision applied to the evaluation of physical prototypes]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 140-143
summary	This work was born from the need to have an objective way to analyze the movement of water drops deflected by a prototype mudguard. To satisfy this need, using computer vision appears as a possibility. This paper defines the parameters that a possible program should work on, and suggests an algorithm to treat the information in order to give a first step for its application.
keywords	computer vision; gotas de agua; prototipos físicos
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	caadria2012_098
id	caadria2012_098
authors	Fok, Wendy W.
year	2012
title	Cross pollination of ideas: Design fabrication and experimentation
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 589–598
doi	https://doi.org/10.52842/conf.caadria.2012.589
summary	The following pages show a selection of studio projects which explore the opportunistic collaborative process between commercial fabricators, material sponsorships, and the institution. The articles speaks about the intersection of design experimentation and significance of fabrication within the contained process of [design \| optimisation \| fabrication]. Within this process the article intersects between practice, commercialisation, and design-research, into the development arena of architectural academic outcomes. The demonstrating fact within much of the research and development also touches upon intricate details of modularity, and designing with optimisation in mind for the purpose (and ease) of fabrication, prototyping, and ‘real-life’ production. While the focus of the academic studios deliberates and uses parametric design systems through digital and analogue modelling to contribute to a full scale designed installation, and actively working with a commercial fabricator and material sponsor (Luxx Newhouse & LG Hausys HI-MACS). The aim of the courses were to acquaint students with theoretical and practical conditions needed for the creating of experimental relational modularity between geometry, scale, and materials as well as the ability to negotiate between quick intuitive studies and definitive quantifiable decisions.
keywords	Design fabrication; material investigation; industry collaboration; architecture; industrial design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2012_022
id	ecaade2012_022
authors	Ham, Jeremy J. ; Schnabel, Marc Aurel ; Datta, Sambit
year	2012
title	Developing Online Construction Technology Resources in Tectonic Design Education
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 135-142
doi	https://doi.org/10.52842/conf.ecaade.2012.1.135
wos	WOS:000330322400013
summary	We outline issues of importance in relation to tectonic design within the architectural profession and the relationship to architectural education in Australia. Twelve years of research and curriculum development at Deakin University is discussed, involving the creation of online resources and case studies, digitally-integrated projects relating to building construction and design studio education. The ethos behind the Construction Primer of engaging students as ‘amateur researchers’ in a way that ensures ‘that student research work is worth more than course assessment’ forms the pedagogical foundation of much of this work. A model of Socially Networked Construction Technology education has been developed that integrates social networks and the Internet to engage students in tectonic design within and outside the classroom through authentic curricula. Through the use of Virtual Galleries, Blogs, YouTube and social networks, a culture of peer learning and sharing has ben developed. Through shared knowledge facilitated through social networks, great potential lies for expanding the synergies between higher order learning and online resource development for design decision support.
keywords	Construction technology; social network; online learning; design decision support
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2023_318
id	ecaade2023_318
authors	Imam, Chowdhury Ali, Othman, Hanin Abdel Salam and Çapunaman, Özgüç Bertug
year	2023
title	Robotic Plaster Carving: Formalizing subtractive detailing of plaster surfaces for construction and crafts
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 397–406
doi	https://doi.org/10.52842/conf.ecaade.2023.1.397
summary	Plaster has been a fundamental material in numerous interior and exterior applications in architectural construction due to its fire-resistant properties and capabilities for intricate detailing. Moreover, prior to the widespread adoption of computer-aided design tools, plaster played a crucial role in historic preservation and architectural education (Mankouche & Schulte, 2012). While the use of decorative plaster elements in architectural construction has waned in popularity, the renewed interest in plaster within the context of advanced robotic fabrication offers a compelling basis for research. This paper presents an investigation into robotic plaster carving for adding detail and texture to plaster surfaces. Within the scope of this study, we identify and systematically examine various fabrication and material parameters for emergent geometries and fabrication defects, subsequently formalizing this robotic workflow for diverse applications in construction and crafts. Among these parameters, we primarily concentrate on toolpath geometry, tool orientation, carving speed, carving profile, and aggregation of carving strokes. Through this bottom-up approach, our objective is to enhance the understanding of tool-material interaction during the fabrication process and achieve improved control over the resulting artifact. Building on these insights, we demonstrate how the proposed robotic plaster carving workflow can be employed for subtractive surface detailing in architectural construction and digital crafts.
keywords	Robotic Fabrication, Plaster Carving, Surface Detailing, Digital Craft
series	eCAADe
email
last changed	2023/12/10 10:49

For more results click below: