Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 461

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_302
id	ecaade2012_302
authors	Colakoglu, Birgül; Durmisevic, Elma; Pasic, Adnan
year	2012
title	International Collaborative Design Studio: Green Transformable Buildings
doi	https://doi.org/10.52842/conf.ecaade.2012.2.107
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 107-114
wos	WOS:000330320600010
summary	Current trends in architectural practice such as an increased focus on sustainable design, integrated design, and the globalization of architecture are increasing the need for practitioners that are skilled in collaboration. Collaboration fosters innovation and creativity. It is a key operating principle for the 21st century and an important skill that an architecture student must be exposed to. The change in knowledge generation and creative problem solving is transforming education towards collaborative learning forcing architecture and engineering schools to address new course structures with “collaborative” aspect. The work presented in this paper draws its base from collaborative design learning. It describes an international collaborative design studio titled “International Design Studio: Green Transformable Buildings” conducted between three institutions, Y_ld_z Technical University (YTU)–Istanbul, University of Twente (TU)-Enschede Engineering Sciences and Industrial Design School, and Architecture Faculty of Sarajevo (AFS).
keywords	Collaborative design; collaborated learning; team work; design process
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_457
id	acadia12_457
authors	Shook, David ; Sarkisian, Mark
year	2012
title	Weighted Metrics: Synthesizing Elements for Tall Building Design
doi	https://doi.org/10.52842/conf.acadia.2012.457
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 457-466
summary	Salient attributes of previously designed projects can be examined to understand how key parameters could inform current design practices. These parameters include gross floor area, number of stories, occupancy, material type, geographic location, seismicity, climatic influences, etc. Two informative analysis tools for intelligent design have been developed which can be used from preliminary planning stages to the final design of individual structures to district-wide developments. These tools can evaluate concurrent influences of these parameters on the built environment. The first is the Environmental Analysis Tool™ (EA Tool). The EA Tool quantifies the estimated equivalent carbon dioxide emissions of structural components. The second analysis tool is Parametric City Modeling (PCM). PCM estimates the usable area of a tower by estimating net floor area. These tools can also be applied to multiple buildings at a district scale to facilitate a new level of design in urban planning efforts. Design information embodied in the physical built environment finds new purpose in the informative prediction of performance at the on-set of digital design. Harvesting and mining data as a natural resource brings new potential to informed design. These concepts and subsequent tools are vital to building sustainable and efficient cities of the future.
keywords	Data Harvesting , Sustainability , Building Efficiency , Urban Planning , Parametric Design , Optimization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
doi	https://doi.org/10.52842/conf.acadia.2012.127
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_15
id	acadia12_15
authors	Johnson, Jason Kelly; Cabrinha, Mark; Steinfeld, Kyle
year	2012
title	Synthetic Digital Ecologies
doi	https://doi.org/10.52842/conf.acadia.2012.015
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 15-17
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “… architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry …” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:52

_id	acadia12_000
id	acadia12_000
authors	Johnson, Jason; Cabrina, Mark and Steinfeld, Kyle (eds.)
year	2012
title	ACADIA 12: Synthetic Digital Ecologies
doi	https://doi.org/10.52842/conf.acadia.2012
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), 588p.
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “... architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry ...” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2012_069
id	ecaade2012_069
authors	Pitts, Gregg ; Luther, Mark
year	2012
title	A Parametric Approach to 3D Massing and Density Modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.157
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.157-165
wos	WOS:000330322400015
summary	This paper addresses the current void between social agendas, environmental criteria and design methodology in urban planning through the implementation of new computational systems. It considers the application of digital design tools such as GIS and parametric systems towards more effi cient and effective design solutions. The digital design methods have been developed and tested within Grimshaw Architects Design Technology Group on both Australian and international urban development projects. A methodology for the use of parametric design for urban design development is suggested for defi ning, simplifying and categorising planning and design strategies. The following tools are a means of generating urban design concepts as digital forms in order to better inform the designer during the design process.
keywords	Parametric; Urbanism; Sustainability
series	eCAADe
last changed	2022/06/07 08:00

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2024_236
id	sigradi2024_236
authors	Marques, Emílio, Monteiro, Verner and Goulart, Solange
year	2024
title	Internalization of Prescriptive Parameters from a Brazilian Energy Performance Standard into BIM Model for Facade Opening Layout
source	Herrera, Pablo C., Gómez, Paula, Estevez, Alberto T., Torreblanca-Díaz, David A. Biodigital Intelligent Systems - Proceedings of the XXVIII Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2024) - ISBN 978-9915-9635-2-5, iBAG-UIC Barcelona, Spain, 13-15 November 2024, pp. 1825–1836
summary	Brazilian energy performance standard for residences (INI-R) classifies residential buildings based on energy efficiency, focusing on building envelope standards to ensure quality and conservation. While beneficial, the standard poses challenges for designers unfamiliar with its parameters. Marble (2012) highlights the need for specialized teams in multidisciplinary projects, yet designers often rely on intuitive approaches, delaying compliance checks (Al-Saadani; Bleil de Souza, 2018). There is a need for simplified validation methods in design software to assist designers without programming expertise. Integrating performance standards into Building Information Modeling (BIM) models offers a potential solution, allowing early parameter visualization and continuous design reassessment. A study incorporating INI-R criteria into a BIM workflow revealed challenges in software syntax and tools. Transparent elements were found to influence design massing, and there were limitations in automating tasks like extracting glazed areas from window families. Despite its potential, BIM needs refinement to improve compliance with design standards.
keywords	Parametric analysis, Energy efficiency compliance, Facade openings, BIM for energy performance, Automatic code verification
series	SIGraDi
email
last changed	2025/07/21 11:50

_id	caadria2012_008
id	caadria2012_008
authors	Schimek, Heimo; Emmanuel Ruffo Calderon Dominguez, Albert Wiltsche and Markus Manahl
year	2012
title	Sewing timber panels: An innovative digitally supported joint system for self-supported timber plate structures
doi	https://doi.org/10.52842/conf.caadria.2012.213
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 213–222
summary	This paper focuses on the joint system of flat panels as parts of a freeform building. This topic is a key area of the ongoing founded research project, in which we investigate nonstandard shapes, realized with standard building materials, namely cross-laminated timber (CLT). We use different discretization algorithms to overlay arbitrary freeform surfaces with ornaments consisting of polygonal flat panels. We investigate a series of ornaments and their discretization results on different surfaces. In this paper, we will present and discuss a new timber-to-timber joint system that we developed exclusively for this project. We discuss the results of the load tests that we performed recently and we take a look at the construction dependent requirements of the joint system concerning the tolerances and the geometry and also, how these constraints inform the digital process. As we will discuss throughout the paper, in earlier publications we described the form finding process and the geometrical guidelines for the discretization of a desired freeform building using ornamental flat patterns. This paper moves one step further as the digital becomes physical and it is closely related to building construction and the computational design outset.
keywords	Digital fabrication technology; computational algorithmic design; building construction; freeform optimisation; CLT joint system
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac201210104
id	ijac201210104
authors	Ambrose, Michael A.
year	2012
title	Agent Provocateur - BIM In The Academic Design Studio
source	International Journal of Architectural Computing vol. 10 - no. 1, 53-66
summary	Building Information Modeling challenges academia to question the fundamental roles of abstraction and simulation in design education. Architectural education and practice assume a traditional set of visual conventions at varied scales and levels of detail, that when taken in concert signifies a whole, complete idea of a building, a correspondence between design intent and interpretation, between the representation of ideas and the design of buildings. BIM viewed as provocateur to these assumptions provides potential critical analysis of how architectural design is taught. Academia must seek out new design methodologies for exploring architecture that reflect the representational shift of BIM by developing teaching methods that reprioritize ways of seeing, thinking and making. This paper describes a studio model that seeks out new active methods for exploring architecture that embrace this shift by developing processes that provoke novel ways to reconcile the traditions of abstraction and the opportunities of synthetic simulation.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_133
id	caadria2012_133
authors	Baerlecken, Daniel and Gernot Riether
year	2012
title	Aggregates: Digital design for design
doi	https://doi.org/10.52842/conf.caadria.2012.607
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 607–616
summary	This paper discusses an educational design methodology for undergraduate studio instruction, which uses a systematic and research based design approach. Based on Lars Spuybroek’s methodology that was originally developed as a one-year graduate and postgraduate studio, a new method for undergraduate teaching has been developed. The paper will discuss Spuybroek’s methodology, as developed for the graduate and postgraduate program, and explain its adaption for undergraduate studio instruction. Spuybroek’s approach is based on a model that starts with research in systems in general that is them tuned to a certain set of architectural questions and developed into parametric buildings in a stepwise procedure by delaying the specifics of site and program.
keywords	Methodology of CAAD; education in CAAD; generative design; parametric modeling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_004
id	ascaad2012_004
authors	El-Masri, Souheil; Mazen Kana’an and Mohammed Fawzi Elanany
year	2012
title	Architecture, Digital Techniques & Project Management
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 14-20
summary	With the invention of computers, Architecture and other Engineering disciplines have undergone revolutionary developments offering new opportunities for improving efficiency and opening new frontiers for creativity. For example in architecture and urban planning, the discussions have been extended from conventional writings to cover cyberspace, virtual architecture and digital city. Moreover, computers have helped in the realization of many complex projects that would be inconceivable with traditional drawing techniques. This is clearly demonstrated in the works of Frank Gehry's, Zaha Hadid, Daniel Libeskind and many others. In deed, digital techniques have changed the design creative process and how the architects think. Traditionally the structured development architectural ideas from 2D drawings (plans, sections, elevations) towards 3D resolution has been replaced by more interactive approach of 2D & 3D. The changes that digital techniques have brought to the field of Architecture; including practice and education, can obviously be viewed from different angles and incite many discussions and questions. However, the purpose of this presentation is to discuss the role of digital techniques within the overall framework of project management in Gulf Housing Engineering. It starts the discussion with a brief on architecture and digital techniques in the Gulf Region, especially during the “boom period”; a period characterized by rapid production of buildings relying heavily on virtual images. It is against this background, the role of digital techniques is evaluated from a practice point of view. In fact in GHE, digital means are integral parts of the holistic project delivery process starting form initiation, to various design stages to construction ending with project completion. In this process emphasis is paid to the inter-relationships between IT Systems and Quality Control which in turn facilitate measuring, monitoring and reporting on various managerial, technical and design and budgetary aspects of the project. The presentation is supported by real case studies of GHE portfolio. It emphasizes that digital techniques should be an integral part of an overall process and should be seen as means to enhance efficiency and creativity; and should contribute to the betterment of the built environment
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_004.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_007
id	ecaade2012_007
authors	Eloy, Sara ; Duarte, José Pinto
year	2012
title	Transformation Grammar for Housing Rehabilitation: From a specifi c to a general grammar
doi	https://doi.org/10.52842/conf.ecaade.2012.1.471
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 471-478
wos	WOS:000330322400048
summary	This article focuses on the use of both shape grammar and space syntax as tools to identify and encode the principles and rules behind the adaptation of existing houses to new requirements. The idea is to use such rules as part of a transformation grammar-based methodology for the rehabilitation of existing dwellings. The developed grammar is a specifi c grammar to inform the rehabilitation of a particular type of building in Portugal – “rabo-de-bacalhau”. In this article the goal is to explore how the “rabo-the-bacalhau” transformation grammar can be transformed in a general rehabilitation grammar in order to inform the rehabilitation of various types of housing buildings.
keywords	Multifamiliar housing building; shape grammars; transformations; housing rehabilitation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_125
id	caadria2012_125
authors	Hanafin, S.; S. Datta, B. Rolfe, M. Hobbs
year	2012
title	Envelope tesselation with stochastic rotation of 4-fold penttiles
doi	https://doi.org/10.52842/conf.caadria.2012.253
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 253–262
summary	The challenge of developing adaptive, responsive low-energy architecture requires new knowledge about the complex and dynamic interaction between envelope architecture and optimisation between competing environmental performance metrics. Advances in modelling the geometry of building envelopes and control technologies for adaptive buildings now permit the sophisticated evaluation of alternative envelope configurations for a set of performance criteria. This paper reports on a study of the parametric control of a building envelope based on moveable façade components, acting as a shading device to reduce thermal gain within the building. This is investigated using a novel pentagonal tiling strategy considering the component design, tessellation and control methods.
keywords	Responsive envelopes; moveable façade components; parametric modelling; tiling geometry; stochastic rotation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2012_153
id	sigradi2012_153
authors	Kaufmann, Stefan; Petzold, Frank
year	2012
title	Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245
summary	In the time since European architects first began using computers in the building design process, the digital revolution has transformed how architects use planning tools completely. Today, digital tools are an indispensable part of planning practice. Besides a wide variety of digital modeling tools, parametric tools offer architects diverse options for generating cybernetic building models as BIM-models or homeostatic parametric geometry models. Cybernetic models help us to describe the buildings as a system and can improve planning efficiency. The aim of planning is to construct or fabricate an end result. The integration of digital fabrication methods in the digital chain is a fundamental goal if architects are to benefit from the progressive development of computer controlled machine tools. Fabrication integrated digital models can automate the planning process up to the production stage and enable the efficient fabrication of building components. The increased efficiency of planning and fabrication has facilitated a growing proliferation of buildings of increasing geometric complexity. Computers can open a door to the realization of new forms, spaces and construction systems to architects that understand the principles of fabrication-integrated cybernetic modeling.
keywords	didactic; parametric design; digital fabrication; CIM;
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2012_310
id	ecaade2012_310
authors	Kotsopoulos, Sotirios D; Casalegno, Federico; Hsiung, Bob; Graybill, Wesley
year	2012
title	A Prototype Hut for the Post-Digital Age
doi	https://doi.org/10.52842/conf.ecaade.2012.2.317
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 317-326
wos	WOS:000330320600032
summary	The paper presents how the latest advances in autonomous building management and electrically activated materials affect the design, production, and operation of residential buildings. The innovative features of an elementary prototype house, which is at the fi nal stage of construction in Trento, N. Italy, are discussed with a view to expose the opportunities and the problems that these new technological developments pose to design research.
keywords	Electrically activated materials; model-based control; design; implementation; operation
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia12_269
id	acadia12_269
authors	Lally, Sean
year	2012
title	Architecture of an Active Context
doi	https://doi.org/10.52842/conf.acadia.2012.269
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 269-276
summary	As we stand with our feet on earth’s outermost surface we build an architecture today that is much like it was several thousand years earlier, in an attempt to extend that outer shell with one of our own making. Artificial masses are built from a refinement of this existing geologic layer into materials of stone, steel, concrete, and glass that assemble to produce new pockets of space through the buildings they create. However, the sixth century BC writer Thales of Miletus put a different perspective on this: he insisted that we live, in reality, not on the summit of a solid earth but at the bottom of an ocean of air (Holmyard 1931). And so, as architecture continues to build up the outermost layer of earth’s surface through a mimicking, embellishing, and enhancing of the materials which it comes from, it raises the question of why we have not brought a similar relationship to the materialities at the bottom of this “ocean” of air to create the spaces we call architecture. If you were looking to level a complaint with the architectural profession, stating that it has not been ambitious enough in scope would not be one. Architects have never shied away from the opportunity to design everything from the building’s shell to the teaspoon used to stir your sugar in its matching cup. But it would seem that the profession has developed a rather large blind spot in terms of what it sees as a malleable material with which to engage. Architects have made assumptions as to what is beyond our scope of action, refraining from engaging a range of material variables due to a belief that the task would be too great or simply beyond our physical control. So even though we are enveloped by them continuously, both on the exterior as well as the interior of our buildings, it must be assumed that the particles, waves, and frequencies of energy that move around us are thought by architects to be too faint and shaky to unload upon them any heavy obligations, that they are too unwieldy for us to control to create the physical boundaries of separation, security, and movement required of architecture. This has resulted in a cultivated set of blinders that essentially defines architecture as a set of mediation devices (surfaces, walls, and inert masses) for tempering the environmental context it is situated in from the individuals and activities within. The spaces we inhabit are defined by their ability to decide what gets in and what stays out (sunlight, precipitation, winds). We place our organizational demands and aesthetic opinions on the surfaces that mediate these variables rather than seeing them as available for manipulation as a building material on their own. The intention here is to recalibrate the materialities that make up that environmental context to build architecture. The starting point is a rather naive question: can we design the energy systems that course in and around us daily as an architectural material so as to take on the needs of activities, securities, and lifestyles associated with architecture? Can the variables that we would normally mediate against instead be heightened and amplified so as to become the architecture itself? That which many would incorrectly dismiss as simply “air” today—thought to be homogeneous, scale-less, and vacant due in part to the limits of our human sensory system to perceive more fully otherwise—might tomorrow be further articulated, populated, and layered so as to become a materiality that will build spatial boundaries, define activities of individuals and movement, and act as architectural space. Our environmental context consists of a diverse range of materials (particles and waves of energy, spectrum of light, sound waves, and chemical particles) that can be manipulated and formed to meet our needs. The opportunity before us today is to embrace the needs of organizational structures and aesthetics by designing the active context that surrounds us through the material energies that define it.
keywords	Material energies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

For more results click below: