Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 325

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_79
id	acadia12_79
authors	Nicholas, Paul ; Tamke, Martin ; Thomsen, Matte Ramsgard ; Jungjohann, Hauke ; Markov, Ivan
year	2012
title	Graded Territories: Towards the Design, Specification and Simulation of Materially Graded Bending Active Structures"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 79-86
doi	https://doi.org/10.52842/conf.acadia.2012.079
summary	The ability to make materials with bespoke behavior affords new perspectives on incorporating material properties within the design process not available through natural materials. This paper reports the design and assembly of two bending-active, fibre-reinforced composite structures. Within these structures, the property of bending is activated and varied through bespoke material means so as to match a desired form. Within the architectural design process, formal control depends upon design approaches for material specification and simulation that consider behavior at the level of the material element as well as the structure. We describe an evolving approach to material specification and simulation, and highlight the digital and material considerations that frame the process.
keywords	graded materials , composite materials , bending-active structures , material properties , material behaviour , simulation , material specification , performance-based design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_257
id	ecaade2012_257
authors	Fischer, Jan-Ruben
year	2012
title	Optimizing Digital Organic Freeform Modelling for Fabrication by Using Parameterization With Glass Fibre Reinforced Plastics (GRP): A Case Study
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 191-200
doi	https://doi.org/10.52842/conf.ecaade.2012.2.191
wos	WOS:000330320600019
summary	In the fabrication of organic free-form shapes in architecture one is constantly faced with specifi c planning and design challenges. This paper examines these problems as well as possible solutions for the design of a completed and built prototype using the example of an organically shaped pavilion made of glass fi bre reinforced plastic modules. The paper describes which adjustments to the original design were required to take the step from “digital physicality” to “physical digitality” to realize a constructive and economically successful implementation. The solutions discussed combine modern digital software methods such as parametric design with innovative 3D modelling principles.
keywords	Digital fabrication; freeform modelling; parametric design; bionic, GRP
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac201210403
id	ijac201210403
authors	Gerber, David J.
year	2012
title	PARA-Typing Informing Form and the Making of Difference
source	International Journal of Architectural Computing vol. 10 - no. 4, 501-520
summary	This paper presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. One set of these design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation.Then through parametric design techniques, modular aggregations were design explored and developed in concert with material properties and constraints. Utilizing digital fabrication full-scale installations were designed, manufactured, and for site-specific configurations. A second set of projects provides an extension of the design instruction that includes the integration of performance criteria into these design objectives.The objectives of the research are to present benefits and limitations of the incorporation of parametric design, performance analysis, and prototyping techniques in comprehensive studio instruction.The paper discusses the resultant informed materialized difference and the impacts on achieving reinforced and hands on learning objectives.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; design pedagogy; performative design
series	journal
last changed	2019/05/24 09:55

_id	acadia12_315
id	acadia12_315
authors	Imbern, Matias ; Raspall, Felix ; Su, Qi
year	2012
title	Tectonic Tessellations: A Digital Approach to Ceramic Structural Surfaces
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 315-321
doi	https://doi.org/10.52842/conf.acadia.2012.315
summary	From the beginning of digital revolution, structural surfaces drew significant attention as a realm that interweaves formal explorations, form-finding and structural optimization. However, after successful experimentation in the virtual domain, it became evident that some of the main challenges lay on how to translate these structural forms into architectural assemblies at the scale of buildings. The development of digital fabrication is crucial in this task, as means to overcome traditional constraints such as need for modular pieces, scaffolding and optimal assembly sequences.This research focuses on digital workflows that combine form finding with robotic fabrication, surface tessellation and panelization. In the past years, the use of digital tools to assemble identical modules into complex formations has achieved significant results for loadbearing walls. Expanding this line of research, the proposed fabrication system carries these experiments on additive fabrication into the production of structural surfaces. The assembly sequence involves a two-step fabrication: off-site panel manufacturing and on-site assembly. The main components of the system consist of two triangular ceramic pieces that provide structural resistance, refined surface finish, and formwork for thin reinforced-concrete layer. Panelization strategies reduce the requirements on-site work and formwork.The paper describes background research, concept, construction process, methodology, results and conclusions.
keywords	Digital Fabrication , Complex Geometry , Reinforced Ceramic , Structural Surfaces , Reduced Formwork
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	sigradi2012_274
id	sigradi2012_274
authors	Maing, Minjung
year	2012
title	Virtual Mock-up Simulation of Building Skins for Design to Fabrication Integration
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 467-470
summary	With the growing demand for mock-up integration into late design and pre-construction phases, there is an increasing gap between the virtual design model of the building and the construction model. The gap is reinforced by lack of strong iterative exchanges between design and fabrication and consequently the construction of the building skin systems. This paper will discuss the research being conducted using virtual mock-ups as an earlier insertion of fabrication parameters into design process and presents a solution to bridge this gap. Studies of model integration will be introduced using component-based 3D-CAD modeling to link front and end user scenarios.
keywords	virtual mock-up; fabrication; integration; building skin ; simulation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2012_93
id	ecaade2012_93
authors	Nicholas, Paul; Tamke, Martin
year	2012
title	Composite Territories: Engaging a Bespoke Material Practice in Digitally Designed Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 691-699
doi	https://doi.org/10.52842/conf.ecaade.2012.2.691
wos	WOS:000330320600074
summary	Today, material performance is regarded as one of the richest sources of innovation. Accordingly, architecture is shifting to practices by which the computational generation of form is directly driven by material characteristics. At the same time, there is a growing technological means for the varied composition of material, an extension of the digital chain that foregrounds a new need to engage materials at multiple scales within the design process. Recognising that the process of making materials affords perspectives not available with found materials, this paper reports the design and assembly of the fi bre reinforced composite structure Composite Territories, in which the property of bending is activated and varied so as to match solely through material means a desired form. This case study demonstrates how one might extend the geometric model so that it is able to engage and reconcile physical parameters that occur at different scales.
keywords	Composites; Material properties; Multi-scale
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_290
id	ecaade2012_290
authors	Barakat, Merate
year	2012
title	Urban Acoustic Simulation: Analysis of Urban Public Spaces through Auditory senses
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 587-592
doi	https://doi.org/10.52842/conf.ecaade.2012.1.587
wos	WOS:000330322400060
summary	This paper explores the sonic characteristics of urban spaces, with the application of apprehending acoustic space and form theory. The theory defines auditory spaces as acoustical arenas, which are spaces defi ned and delineated by sonic events. Historically, cities were built around a soundmark, for example, the resonance of a church bell or propagation of a calling for prayer, or a factory horn. Anyone living beyond the horizon of this soundmark was not considered citizens of that town. Furthermore, the volume of urban sonic arenas depends on natural. Digital simulation is necessary to visualize the ephemeral and temporal nature of sound, within a dynamic immersive environment like urban spaces. This paper digitally analyses the different morphologies of old cities and forms of growth in relation to the sound propagation and ecological effects. An experiment is conducted with the aid of an ancient North-African city model, exposed to a point cloud agent system. By analysing how the sound propagates from the known soundmark through the urban fabric, with the wind pressure interference; the paper compares the theoretical concept of soundmarks and the known perimeter of the ancient city
keywords	Urban Public Spaces; Aural Design; Auditory Arena Simulation; Soundmark
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_5
id	ecaade2012_5
authors	Biloria, Nimish; Chang, Jia-Rey
year	2012
title	HyperCell: A Bio-Inspired Information Design Framework for Real-Time Adaptive Spatial Components
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 573-581
doi	https://doi.org/10.52842/conf.ecaade.2012.2.573
wos	WOS:000330320600061
summary	Contemporary explorations within the evolutionary computational domain have been heavily instrumental in exploring biological processes of adaptation, growth and mutation. On the other hand a plethora of designers owing to the increasing sophistication in computer aided design software are equally enthused by the formal aspects of biological organisms and are thus meticulously involved in form driven design developments. This focus on top-down appearance and surface condition based design development under the banner of organic architecture in essence contributes to the growing misuse of bio-inspired design and the inherent meaning associated with the terminology. HyperCell, a bio-inspired information design framework for real-time adaptive spatial components, is an ongoing research, at Hyperbody, TU Delft, which focuses on extrapolating bottom-up generative design and real-time interaction based adaptive spatial re-use logics by understanding processes of adaptation, multi-performance and self sustenance in natural systems. Evolutionary developmental biology is considered as a theoretical basis for this research.
keywords	Adaptation; Swarms; Evo-Devo; Simulation: Cellular component
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_214
id	ecaade2012_214
authors	Das, Subhajit ; Dutt, Florina
year	2012
title	Design optimization in a hotel and offi ce tower through intuitive design procedures and advanced computational design methodologies. Façade design optimization by computational methods
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 235-243
doi	https://doi.org/10.52842/conf.ecaade.2012.1.235
wos	WOS:000330322400023
summary	The research topic of this paper exemplifies design optimization techniques of a hotel/office tower in Central China (Nanjing city), which faces subtropical humid climate throughout the year. The main intent of the project is to fi nd optimized design solution with the aid of parametric design tools and Visual Basic Scripting techniques (in Rhino Script & Grasshopper) combined with intuitive design process. In any urban context, we firmly believe that architectural design is a responsive phenomenon, which faces diverse interaction with the user & the local climate. The building design of the proposed tower acknowledges these responsive factors of the design with the environment along with building users or residents. Consequently, we strive to develop a sustainable design solution, which is ecologically efficient and psychologically conducive to the wellbeing of the user. We developed our intuitive design product with complex computational design toolsets to leverage design and energy efficiency. In this procedure, we draw major design concepts and geometrical typologies from natural systems in the form of bio mimicry or biologically inspired design process. Overall, this research paper outlines the significance and relevant benefi ts of the combination of intuitive design (from experience, expertise and architects skills) with parametric scripting tools.
keywords	Sustainable Building Façade; Parametric Architecture; Intelligent building skin; Solar Architecture
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
doi	https://doi.org/10.52842/conf.caadria.2015.765
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	b92c
id	b92c
authors	Derix, Christian
year	2012
title	Digital Masterplanning: Computing Urban Design
source	In Urban Design and Planning: Institution of Civil Engineers, Thomas Telford Publishers, ahead-of-print
summary	The digital revolution has finally reached urban design as one of the last design communities not very familiar with computing. This is despite the city and geography being the natural fields for systems analogy and digital models of mathematical and statistical simulation were developed in the 60s and 70s for urban planning, much before industrial or architectural design. The recent arrival of urban design simulations is however not as innovative and radical as their 50 year old counterparts since they use computing solely for policy visualization, quantity evaluation or pattern generation. The Computational Design and Research Group [CDR] at Aedas\|R&D started in 2007 to develop an open platform of lightweight applications – Digital Masterplanning – in collaboration with partners from academia and industry to provide methods for urban design, based on computational methods called meta-heuristic algorithms. An attempt to encode empirical knowledge and design assumptions into simulations is described where designers can assemble the resulting applications according to scales and brief into custom workflows.
keywords	Spatial Planning, Urban Design, Meta-Heuristic Algorithms, Computational Design
series	journal paper
type	normal paper
email
more	http://www.icevirtuallibrary.com/content/article/10.1680/udap.9.00041
last changed	2012/09/20 17:41

_id	ecaade2012_261
id	ecaade2012_261
authors	Feringa, Jelle; Sondergaard, Asbjorn
year	2012
title	Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500
doi	https://doi.org/10.52842/conf.ecaade.2012.2.495
wos	WOS:000330320600052
summary	Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC) (Mcgee 2011). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure (Sondergaard & Dombernowsky 2011). A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase (Xie 2010), the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive.
keywords	Topology optimization; robotics; hotwire cutting; EPS formwork; concrete structures
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2012_218
id	ecaade2012_218
authors	Gürer, Ethem ; Alacam, Sema ; Cagdas, Gülen
year	2012
title	How to Deal with Novel Theories in Architectural Education A Framework for Introducing Evolutionary Computation to Students
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 107-114
doi	https://doi.org/10.52842/conf.ecaade.2012.1.107
wos	WOS:000330322400010
summary	Evolution of/in artificial systems has been discussed in many fields such as computer science, architecture, natural and social sciences over the last fifty years. Evolutionary computation which takes its roots in computation and biology has a potential to enrich ways of thinking in architecture. This paper focuses mainly on the methodology of how evolutionary computation theories might be embedded in architectural education within the theoretical course in graduate level.
keywords	Evolutionary design; evolutionary algorithms; computational theory; architectural design curriculum
series	eCAADe
email
last changed	2022/06/07 07:49

_id	caadria2012_095
id	caadria2012_095
authors	Johansson, Mikael and Mattias Roupé
year	2012
title	Real-time rendering of large building information models: Current state vs. state-of-the-art
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 647–656
doi	https://doi.org/10.52842/conf.caadria.2012.647
summary	With the use of Building Information Models (BIM), real-time 3D visualisations have become a natural tool in order to communicate ideas and share information between all involved parties in a project. Currently, several different BIM viewers are available for the purpose of interactive presentations and design reviews. However, as BIMs become larger and more detailed, it provides a challenge for available software solutions to manage them interactively. In this paper we present our findings from analysing three commonly used BIM viewers - Tekla BIMSight, Autodesk Navisworks and Solibri Model Viewer - in terms of real-time rendering performance. In addition we have developed a prototype BIM viewer to test modern approaches for efficient real-time rendering. Specifically, we have implemented the latest version of the Coherent Hierarchical Culling algorithm. Our results show that existing BIM viewers all share limitations in their ability to handle large and complex BIMs interactively. However, for the same test models, our prototype BIM viewer enables smooth real-time performance with no visual artefacts. The results from our tests thus shows that the technology to enable correct real-time rendering of large and complex BIMs is already accessible, but are currently not utilised by any of the tested BIM viewers.
keywords	3D graphics; BIM; real-time rendering
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2012_038
id	caadria2012_038
authors	Kato, Kody and Hyoung-June Park
year	2012
title	Toward a performance-oriented architecture: An integrated design approach to a real time responsive structure
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 59–68
doi	https://doi.org/10.52842/conf.caadria.2012.059
summary	This paper started from the study of “performance-oriented architecture” for the purpose of developing a real time responsive prototype that can enclose large expansive interior space. Questions regarding the relationship between the structural arrangement of systems and the natural environment initiated an investigation in Phyllotaxis. It has been found in plant systems for the optimisation of photosynthesis with harvesting maximum amounts of solar energy. In the design of a real time responsive prototype, an algorithmic approach is introduced with the mathematical interpretation of Phyllotaxis and its translation into the global geometry of the prototype. Also, the usage of a Voronoi diagram is parametrically configured to form the local geometry of the prototype. The interactive mechanism of the prototype was achieved with an assorted computational application. Furthermore, with the demonstration of the aforementioned prototype in both digital and physical environments, its implementation process is explained.
keywords	Performance-oriented architecture; phyllotaxis; Voronoi diagram; real-time-responsive structure
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_152
id	ecaade2012_152
authors	Krieg, Oliver David; Mihaylov, Boyan; Schwinn, Tobias; Reichert, Steffen; Menges, Achim
year	2012
title	Computational Design of Robotically Manufactured Plate Structures Based on Biomimetic Design Principles Derived from Clypeasteroida
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 531-540
doi	https://doi.org/10.52842/conf.ecaade.2012.2.531
wos	WOS:000330320600056
summary	The paper presents the current development of an ongoing research project about the integration of robotic fabrication strategies in computational design through morphological and functional principles derived from natural systems. Initially, a developed plate structure material system based on robotically fabricated fi nger joints is being informed by biomimetic principles from the sea urchin Clypeasteroida in order to be able to adapt effi ciently to its building environment. Consequently, the paper’s main focus lies on translating the biomimetic design principles into a computational design tool, also integrating fabrication parameters as well as structural and architectural demands. The design tool’s capability to integrate these parameters is shown by the design, development and realization of a full-scale research pavilion. The paper concludes with discussing the performative capacity of the developed material system and the introduced methodology.
keywords	Biomimetics; Digital Simulation; Parametric Design; Robotic Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2012_391
id	sigradi2012_391
authors	Lopez, Gabriela Bustos
year	2012
title	Ética en la Complejidad del Diseño Arquitectónico con Tecnología Digital (TD): redes multidimensionales colaborativas [Ethics in the Complexity of Architectonic Design with Digital Technology (DT): Multidimensional Collaborative Networks]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 43-46
summary	This article reflects on the ethical implications of digital technology (DT) in architectonic design. Such a reflection is based on the definition of complex epistemology and the educational ethical reform (Morin 2000). The article ends with a conceptual proposal of an interactive, multidimensional and collaborative environment of design. The goal is to re-set patterns and strategies of design with DT from plural perspectives and poly-temporal creations, all of it inserted in a complex ethical point of view of a contemporary design. The wanted result is a social 3d network of design that unifies visualization, modeling tools, videoconferencing, chatting, and social-academic network managing.
keywords	Ethics; Digital Technology (DT); Architectonic Design; Multidimensional Collaborative Networks
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2020_174
id	sigradi2020_174
authors	Marques, Aline Calazans; Felicio, José Augusto Recker
year	2020
title	Dialogue between Building Shape and Thermal Performance
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 174-179
summary	This paper deals with the research of the building shape in a constant and dialectical relationship with thermal performance. The purpose of this research is to understand and explore the dialogue between shape and performance with generative strategies. The method was based on the works by Oxman (2010), Olgyay (2015), and Di Mari & Yoo (2012), by means that relate the form to performance issues. The thermal performance data found to result from the relationship between thermal conditions, the shape of the envelope, and the characteristics of the eight Brazilian bioclimatic zones.
keywords	Building shape, Thermal performance, Generative system, Teaching observation
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	acadia15_211
id	acadia15_211
authors	Melsom, James; Girot, Christophe; Hurkxkens, Ilmar
year	2015
title	Directed Deposition: Exploring the Roles of Simulation and Design in Erosion and Landslide Processes
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 211-221
doi	https://doi.org/10.52842/conf.acadia.2015.211
summary	Working with and against environmental processes, such as the movement of water, earth, and rock, and terrain, has been a perpetual challenge since the dawn of civilisation. While it has been possible to gradually tame many landscapes to perform in a predictable manner, there are many circumstances where we are forced to live with and around such processes in everyday life. This research is primarily interested in the potential of design to interact with such processes. Specifically, we are interested in the designed redirection of erosion and landslide processes already observable in nature, taking the urbanised hillsides of the Alps as test case scenario. The research specialisation continues a research and design focus specialised on processes material deposition of river and flood systems, further down the water catchment chain (REF: ANON 2012). This specific alpine research is compelling in the context of Anthropocene processes, we are specifically focussed in the appraisal, harnessing and redirection of existing environmental phenomena, given what can be understood as our inevitable interaction with these processes (Sijmons 2015). Within this broader research, which has ecological, cultural, and formal potential, this paper shall explore the practical aspects of connecting design, and the designer, with the potential for understanding and designing these evolving mountain landscapes. There is a long history behind the development of landscape elements which control avalanches, mud, rock, and landslides. The cultural, functional and aesthetic role of such elements in the landscape is relatively undiscussed, epitomising an approach that is primarily pragmatic in both engineering and expense. It is perhaps no surprise that these elements have a dominant physical and visual presence in the contemporary landscape. Through the investigation of synergies with other systems, interests, and design potential for such landscape elements, it is proposed that new potential can be found in their implementation. This research proposes that the intuitive linking of common design software to direct landslide simulation, design of and cultural use can interact with these natural processes. This paper shall demonstrate methods to within which design can enter the process of landscape management, linking the modelling processes of the landscape designer with the simulation capabilities of the specialised engineer.
keywords	Landscape Design Workflows, Landscape Simulation, Terrain Displacement, Material Flow, Erosion Processes, Interdisciplinary Workflows
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia12_87
id	acadia12_87
authors	Menicovich, David ; Gallardo, Daniele ; Bevilaqua, Riccardo ; Vollen, Jason
year	2012
title	Generation and Integration of an Aerodynamic Performance Data Base Within the Concept Design Phase of Tall Buildings
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 87-96
doi	https://doi.org/10.52842/conf.acadia.2012.087
summary	Despite the fact that tall buildings are the most wind affected architectural typology, testing for aerodynamic performance is conducted during the later design phases well after the overall geometry has been developed. In this context, aerodynamic performance studies are limited to evaluating an existing design rather than a systematic performance study of design options driving form generation. Beyond constrains of time and cost of wind tunnel testing, which is still more reliable than Computational Fluid Dynamics (CFD) simulations for wind conditions around buildings, aerodynamic performance criteria lack an immediate interface with parametric design tools. This study details a framework for empirical data collection through wind tunnel testing of building mechatronic models and the expansion of the collected dataset by determining a mathematical interpolating model using an Artificial Neural Network (ANN) algorithm developing an Aerodynamic Performance Data Base (APDB). Frederick Keisler called the interacting of forces CO-REALITY, which he defined as The Science of Relationships. In the same article Keisler proclaims that the Form Follows Function is an outmoded understanding that design must demonstrate continuous variability in response to interactions of competing forces. This topographic space is both constant and fleeting where form is developed through the broadcasting of conflict and divergence as a system seeks balance and where one state of matter is passing by another; a decidedly fluid system. However, in spite of the fact that most of our environment consists of fluids or fluid reactions, instantaneous and geologic, natural and engineered, we have restricted ourselves to approaching the design of buildings and their interactions with the environment through solids, their properties and geometry; flow is considered well after the concept design stage and as validation of form. The research described herein explores alternative relations between the object and the flows around it as an iterative process, moving away from the traditional approach of Form Follows Function to Form Follows Flow.
keywords	Tall Buildings , Mechatronics , Artificial Neural Network , Aerodynamic Performance Data Base
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

For more results click below: