Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
wos	WOS:000330320600044
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_025
id	caadria2012_025
authors	Braumann, Johannes and Sigrid Brell-Cokcan
year	2012
title	Digital and physical computing for industrial robots in architecture: Interfacing Arduino with industrial robots
doi	https://doi.org/10.52842/conf.caadria.2012.317
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 317–326
summary	Customisation is one of the most important topics in architecture, as architects generally work on individual prototypes instead of mass-produced designs. By using customised design and fabrication tools, architects are able to individually respond to challenges, instead of relying on universal software tools. This paper proposes new software components for interfacing industrial robots with physical computing microcontrollers, thereby allowing the customisation of physical tools for industrial robots. By pairing physical computing with rapid prototyping, architects are able to design and prototype individual fabrication processes for industrial robots.
keywords	Industrial robots; physical computing; interfaces; rapid prototyping; computer aided manufacturing
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2012_198
id	sigradi2012_198
authors	dos Santos, Denise Mônaco; Tramontano, Marcelo
year	2012
title	A parede no digital é mais lisa!” Hibridismos urbanos e grafitti digital [The wall is smoother in digital!” Urban hybridisms and digital graffiti]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 135-139
summary	This paper presents the development and results of some interventions in urban spaces using a specific set of computer interfaces, i.e., the tangible interfaces of digital graffiti implemented during cultural activities carried out as part of the Hybrid Territories project: digital media, communities, and cultural activities developed by Nomads.usp, University of São Paulo. It consists of events that aim to explore the creation of hybridisms in urban fragments so as to enrich them in multiple ways, but mainly from a sociocultural perspective.
keywords	Espaços híbridos urbanos; Interfaces computacionais tangíveis; Graffiti digital
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
doi	https://doi.org/10.52842/conf.acadia.2012.209
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ascaad2012_002
id	ascaad2012_002
authors	Maher, Mary Lou
year	2012
title	Designing CAAD for Creativity
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 7-9
summary	Can we design CAAD to enhance creativity? CAAD is often considered a tool that assists architects in design by managing documentation and facilitating visualization. While there has been anecdotal concern that CAAD inhibits creativity, there is empirical evidence that CAAD can enhance creativity. The challenge is to develop principles for designing CAAD for creativity based on theoretical and empirical research on recognizing and enhancing individual and distributed creative cognition. This presentation describes three concepts that can lead to principles for designing CAAD to enhance human creativity: recognition, perception, and diversity. // 1. Recognition: A framework for recognizing and evaluating creative design, shown in Figure 1, is developed based on research in psychology and design science that includes novelty, value, and surprise. This framework provides a basis for comparing and evaluating the impact of CAAD on creativity. 2. Perception: Perception affects cognition and therefore interaction design is a critical component of designing CAAD for creativity. The results of an empirical study, shown in Figure 2, using a protocol analysis find that changing perception to include tangible user interfaces has a positive effect on creative cognition. These results lead to design principles for increasing perceptual modalities in future CAAD systems. 3. Diversity: A theoretical framework for social and collective intelligence in design show how an increase in cognitive diversity leads to an increase in innovation. Using this framework we can develop design processes that combine the benefits of individual, team, and crowdsourced design ideas, as shown in Figure 3.
series	ASCAAD
type	keynote paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_002.pdf
last changed	2012/05/15 20:46

_id	caadria2012_102
id	caadria2012_102
authors	Manahl, Markus; Heimo Schimek, Emmanuel Ruffo Calderon Dominguez and Albert Wiltsche
year	2012
title	Ornamental discretisation of free-form surfaces: Developing digital tools to integrate design rationalisation with the form finding process
doi	https://doi.org/10.52842/conf.caadria.2012.347
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 347–356
summary	The adoption of digital planning methods has given rise to an unprecedented formal freedom in architectural design. Free-form shapes enjoy considerable popularity in architectural production today. However, these shapes prove to be notoriously hard to fabricate. This paper reports on an ongoing research project investigating the approximation of continuous double-curved surfaces by discrete meshes consisting solely of planar facets, which can be constructed efficiently by using standardised, mass-produced building materials. We introduce our geometrical approach, which is based on the intersection of tangent planes to the surface, and present the digital tools we conceived to integrate the processes of design rationalisation and form-finding.
keywords	Digital tool-making; parametric design; free-form surfaces; design rationalisation; planar discretisation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2012_008
id	caadria2012_008
authors	Schimek, Heimo; Emmanuel Ruffo Calderon Dominguez, Albert Wiltsche and Markus Manahl
year	2012
title	Sewing timber panels: An innovative digitally supported joint system for self-supported timber plate structures
doi	https://doi.org/10.52842/conf.caadria.2012.213
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 213–222
summary	This paper focuses on the joint system of flat panels as parts of a freeform building. This topic is a key area of the ongoing founded research project, in which we investigate nonstandard shapes, realized with standard building materials, namely cross-laminated timber (CLT). We use different discretization algorithms to overlay arbitrary freeform surfaces with ornaments consisting of polygonal flat panels. We investigate a series of ornaments and their discretization results on different surfaces. In this paper, we will present and discuss a new timber-to-timber joint system that we developed exclusively for this project. We discuss the results of the load tests that we performed recently and we take a look at the construction dependent requirements of the joint system concerning the tolerances and the geometry and also, how these constraints inform the digital process. As we will discuss throughout the paper, in earlier publications we described the form finding process and the geometrical guidelines for the discretization of a desired freeform building using ornamental flat patterns. This paper moves one step further as the digital becomes physical and it is closely related to building construction and the computational design outset.
keywords	Digital fabrication technology; computational algorithmic design; building construction; freeform optimisation; CLT joint system
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac201210203
id	ijac201210203
authors	Abdelhameed, Wael A.
year	2012
title	Micro-Simulation Function to Display Textual Data in Virtual Reality
source	International Journal of Architectural Computing vol. 10 - no. 2, 205-218
summary	Virtual reality creates an effective communication platform with a high degree of perception and exploration, increasing the benefits of VR applied functions.This research paper reports a virtual reality function of using the micro-simulation editor-player with XML file in the virtual reality environment.The details of the function are presented.The function aiming at combining visual and textual data in VR model visualisation, was developed by the researcher, and was included in the micro-simulation plug-in of a virtual reality program,VR Studio version 6, previously known as UC-Win/Road, by the program developers.The research paper discusses the computer simulation techniques and uses in virtual reality in general.The research paper proceeds to introduce a case study of construction process visualization in the virtual reality environment, in which the newly developed function is utilized to simultaneously visualise data reports related to the stages of VR model visualisation.The concluding remarks accentuate this micro-simulation function with its potential uses in different fields.
keywords	Micro-Simulation, XML,Virtual Reality, Construction Process Visualisation
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_009
id	ascaad2012_009
authors	Abdelmohsen, Sherif
year	2012
title	Genres of Communication Interfaces in BIM-Enabled Architectural Practice
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 81-91
summary	This paper explores the interaction and different types of representations enacted in a BIM-enabled environment that involves interdisciplinary and intradisciplinary collaboration among teams of designers in an architectural praxis context. By means of an ethnographic study conducted over the course of an architectural project from schematic design to construction documents, including five disciplines and twenty subjects, genres of communication interfaces are identified between BIM-authoring tools, sketching interfaces and domain specific analysis tools, and explored within the realm of distributed cognition. Implications in architectural practice and education are then discussed.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_009.pdf
last changed	2012/05/15 20:46

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	caadria2012_014
id	caadria2012_014
authors	Benros, Deborah; Jose Pinto Duarte and Sean Hanna
year	2012
title	An alternative Palladian shape grammar: A subdivision grammar for Palladian villas
doi	https://doi.org/10.52842/conf.caadria.2012.415
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 415–424
summary	This paper describes a shape grammar that recreates Palladio’s villas. A Palladian grammar was previously proposed by Stiny and Mitchell. However, this alternative grammar uses different parametric shape rules and methodology to test the hypothesis that different grammars can generate the same corpus of designs. The formalism is then implemented using a computerised design tool. The grammar includes subdivision rules that allow for a more economical formulation. The project is part of wider research aimed at formulating a generic housing grammar.
keywords	Shape grammar; design rules; housing grammar
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_115
id	caadria2012_115
authors	Biswas, Tajin; Tsung-Hsien Wang and Ramesh Krishnamurti
year	2012
title	Data sharing for sustainable assessments: Using functional databases for interoperating multiple building information structures
doi	https://doi.org/10.52842/conf.caadria.2012.193
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 193–202
summary	This paper presents the development and implementation of an automatic sustainable assessment prototype using functional databases. For the practical purpose, we use Leadership in Energy and Environmental Design (LEED) as the exemplar standard to demonstrate the integrative process from building information aggregation to final evaluation. We start with a Building Information model, and use Construction Operations Building Information Exchange (COBie) as a bridge to integrate LEED requirements. At present, the process of sustainable building assessment requires information exchange from various building professionals. However, there is no procedure to manage, or use, information pertaining to sustainability. In our research, we translate rules from LEED into computable formulas and develop a prototype application to produce templates for LEED submission.
keywords	Building information databases; sustainable assessment
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2012_022
id	ascaad2012_022
authors	Borham, Ahmad; Lobna Sherif and Osama Tolba
year	2012
title	Resilient Rules - Culture and Computation in Traditional Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 211-221
summary	This study explores the influence of the socio-cultural rules, based upon Islamic jurisprudence (fiqh), on the complexity of the traditional built environment. This system of rules organized the societal activities, including decisions and activities related to design and construction in the Arab-Islamic city. Considering the city as a complex system, the study will try to show how this rules system made the Arab-Islamic city resilient and adaptive. Complex Adaptive Systems (CAS) are non-linear, self-organizing systems that have the ability to adapt to changing conditions through changing the rules that organize the random autonomous interactions between agents in the environment. This adaptation takes place through gradual gained experience that is reflected in the behavior of agents. This study attempts to interrelate different bodies of literature (Complexity/Chaos theory and built environment studies) in a single framework that aims to show that the socio-cultural rules system based on fiqh was a major factor in the resilience of the traditional built environment. These interrelations are illustrated using a graph called Computational Rules Graph (CRG). The CRG relates the traditional rules system to attributes of complex systems in a graph that can be modeled computationally. Traditional rules (codes of conduct) are proscriptive (non-deterministic), defining what is prohibited, thereby producing autonomous environments where agents had control over their immediate environment. In comparison, contemporary rules of the built environment (building codes) are prescriptive (deterministic), subscribing definite actions that need to take place by the stake-holder (agent) neglecting user needs and preferences. The application of these traditional rules system increased the agent’s autonomy and freedom of action. It also helped establish stronger social networks among agents, which resulted in a resilient environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_022.pdf
last changed	2012/05/15 20:46

_id	caadria2012_087
id	caadria2012_087
authors	Cho, Ji Young
year	2012
title	Spatial ability, creativity, and studio performance in architectural design
doi	https://doi.org/10.52842/conf.caadria.2012.131
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 131–140
summary	Architectural design is a multifaceted discipline that requires many abilities, in particular creativity and spatial ability. In order to identify the relationships among spatial ability, creativity, and studio performance, an exploratory study was conducted at one Midwestern university in the USA. Twenty-one freshman architecture students participated in the study, which involved three tasks: (a) the Torrance Test of Creative Thinking that measures fluency and originality in creativity, (b) a group of general spatial ability tests, and (c) the computer-based Architectural Spatial Ability Test. Students’ scores on the tasks were compared with their studio performance grades using SPSS. Results show that studio performance correlated with the ASAT but did not correlate with the TTCT or a group of general spatial ability tests. These findings indicate that a student’s performing well does not necessarily mean that she or he can generate many different alternatives (fluency) or original ideas (originality) nor that the student possesses general spatial abilities. The findings show the complexity of architectural design components and reveal beginning design students’ architectural abilities.
keywords	Creativity; spatial ability; architectural spatial ability; studio performance; architectural design education
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2012_032
id	caadria2012_032
authors	Chok, Kermin
year	2012
title	Automation at scale: Geometry, analysis and post processing
doi	https://doi.org/10.52842/conf.caadria.2012.017
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 17–26
summary	Our team is currently engaged in the peer review of a large steel stadium dome roof. The roof has a diameter of approximately 300m and rises to over 70m in elevation. In addition to its size, the roof also contains a moveable component which can be deployed during inclement weather. The roof structure comprises of approximately 32,000 beams with 10,000 nodes. This paper overviews our efforts in scaling digital design techniques with regards to automation and parametric geometry to expedite the verification of structural members and geometrically complicated connection nodes. The paper will discuss two realms where automation was deployed. The first realm is the verification of Type 1 node connections where less than eight members intersect at a single work point and is relatively geometrically simple. Type 1 nodes were checked against published code requirements. Type 2 connections consisted of nodes where more than eight members intersected or bracing angles did not meet code guidelines. Type 2 nodes were verified using the finite element method and large scale automation of node geometry creation to structural analysis post processing was employed.
keywords	Automation; Rhino 3D; scripting; structural; database
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2012_403
id	sigradi2012_403
authors	Coutinho, Filipe; Castro e Costa, Eduardo; Duarte, José Pinto; Kruger, Mário
year	2012
title	Alberti Digital – Tradição e inovação na teoria e prática da arquitectura em Portugal [Alberti Digital – Tradition and inovation in theory and practice at Portuguese architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 211-215
summary	This article describes the class Alberti Digital taught at the Faculty of Architecture of the Technical University of Lisbon (FAUTL) and later in the Department of Architecture, University of Coimbra (Darq / UC), centered in interpretation and exploitation of Alberti`s treatise Da Arte Edificatoria where students had to develop a visual computer program with the algorithms present in the treatise to generate virtual and physical models using different digital fabrication techniques, allowing them to gain skills in the use of computational resources and knowledge of history and theory related with Renaissance architecture and the principles of Alberti in particular.
keywords	Alberti, Da Arte Edificatória, ensino de arquitectura, programação em Grasshopper, prototipagem rápida
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2012_348
id	sigradi2012_348
authors	de Abreu, Sandro Canavezzi
year	2012
title	Regimes de permeabilidade entre o humano e os meios digitais e a tensão entre o digital e o analógico em processos de criação em Arquitetura [Regimes of permeability between human and digital media and the tension between digital and analogical in creative processes in Architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 69-73
summary	This article intends to introduce the concept of regimes of permeability (mirroring, transparency and crossing) between man and digital machine as a framework for understanding the relation between analogical and digital and that is also present in computer mediated creative processes in Architecture. These regimes are based in the relation between the concepts information and transduction. Finally, it will be described an experiment where an interface was created relating to the regimes of permeability.
keywords	espelho; informação; transdução; interfaces
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: