Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 549

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	sigradi2012_107
id	sigradi2012_107
authors	Carrión, Awilda Rodríguez
year	2012
title	Scalable Explorations
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 449-452
summary	Authoring environments should strive for effortless navigation, traversing the space-scale virtual space in order to comprehend relationships between distinct elements, provide landmark or reference objects to keep the user’s orientation and perceptual cues that will enhance direction and depth perception. This paper will explore how the dynamic nature of 3-D virtual environments can provide new generations with powerful tools to explore disparate spatial scales, expand the modeling information and give them the ability to manipulate conceptually critical information that is governed by various scale parameters.
keywords	BIM; virtual space; scale; urban space
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_296
id	ecaade2012_296
authors	Erhan, Halil I. ; Sanchez, Rodolfo ; Woodbury, Robert F. ; Mueller, Volker
year	2012
title	Visual Narratives of Parametric Design History: Aha! Now I see how you did it!
doi	https://doi.org/10.52842/conf.ecaade.2012.1.259
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 259-268
summary	Histories are underdeveloped and underused features in parametric CAD (PCAD) systems. Designers employ backtracking and deferral strategies that both use and augment history. Using backtracking and deferral as a framework we present two classes of design process graph diagramming techniques for augmented history in PCAD. We compare the second version of these design process graphs across several designers who completed multiple tasks using two parametric systems (SolidWorks and GenerativeComponents). The two systems show similar types of action, with markedly more and deeper backtracking in GenerativeComponents. We present a third diagramming system as a design for a proof of concept prototype. This prototype aims to expand the capabilities of design histories beyond access to single prior states to visualize and enable direct interaction based on backtracking and deferral.
wos	WOS:000330322400026
keywords	Parametric CAD, design history, backtracking, deferral, design space
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_108
id	caadria2012_108
authors	Gerber, David and Shih-Hsin (Eve) Lin
year	2012
title	Designing-in performance through parameterisation, automation, and evolutionary algorithms: ‘H.D.S. BEAGLE 1.0’
doi	https://doi.org/10.52842/conf.caadria.2012.141
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 141–150
summary	Design is both a goal oriented and decision making activity. It is ill-defined by nature as designing includes weighing and understanding trade-offs amongst soft and hard objectives or in other words vague or imprecise and computationally definable criteria and goals. In this regard designers in most contemporary practices face a crisis of sorts. How do we achieve performance or sustainability under these large degrees of uncertainty or with limited design cycle times? Fundamentally design collaborations, teams of domain experts, are not typically given enough time to design-explore, generate design alternatives in order to find or evolve solution quality through expansive design search spaces. Given these limitations of time and the ever more complex criteria for ‘designing-in’ performance our research approach provides a computational strategy to expand the solution space as well as pre-sort and qualify candidate designs. The research presents a novel methodology and technology framework and an initial implementation that was developed to enhance the human activity of design exploration, domain integration, and further evolve design process for performance goals. The research does so through generating and optimising a highly correlated solution space in conjunction with a near simultaneous evaluation of design alternative fitness.
keywords	Parametric design; multi-disciplinary design optimisation (MDO); evolutionary algorithms; performative design process
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia12_67
id	acadia12_67
authors	Gerber, Dr. David Jason ; Lin, Shih-Hsin
year	2012
title	Synthesizing Design Performance: An Evolutionary Approach to Multidisciplinary Design Search
doi	https://doi.org/10.52842/conf.acadia.2012.067
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 67-75
summary	Design is a goal oriented decision-making activity. Design is ill defined and requiring of synthetic approaches to weighing and understanding tradeoffs amongst soft and hard objectives, and the imprecise and or computationally explicit criteria and goals. In this regard designers in contemporary practice face a crisis of sorts. How do we achieve performance under large degrees of uncertainty and limited design cycle time? How do we better design for integrating performance? Fundamentally design teams, are not typically given enough time nor the best tools to design explore, to generate design alternatives, and then evolve solution quality to search for best fit through expansive design solution spaces. Given the complex criteria for defining performance in architecture our research approach experiments upon an evolutionary and integrative computational strategy to expand the solution space of a design problem as well as pre-sort and qualify candidate designs. We present technology and methodology that supports rapid development of design problem solution spaces in which three design domains objectives have multi-directional impact on each other. The research describes the use of an evolutionary approach in which a genetic algorithm is used as a means to automate the design alternative population as well as to facilitate multidisciplinary design domain optimization. The paper provides a technical description of the prototype design, one that integrates associative parametric modeling with an energy use intensity evaluation and with a financial pro forma. The initial results of the research are presented and analyzed including impacts on design process; the impacts on design uncertainty and design cycle latency; and the affordances for ‘designing-in’ performance and managing project complexity. A summary discussion is developed which describes a future cloud implementation and the future extensions into other domains, scales, tectonic and system detail.
keywords	Parametric Design , Domain Integration , Design Methods , Multidisciplinary Design Optimization (MDO) , Evolutionary Algorithms , Design Decision Support , Generative Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2012_285
id	sigradi2012_285
authors	Hoewell, Eduardo Bonini; Borda, Adriane
year	2012
title	O digital e o analógico em simbiose na produção de ilustrações [The digital and analog in symbiosis to produce illustrations]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 661-664
summary	This article analyzes a specific process of creating and producing illustrations, developed by the first author of this study, which combines analog and digital techniques, proposing to discuss the subject without positioning itself as unique and foolproof method, but instead as a way to expand and contribute to the existing content into a new reality in the visual arts.
keywords	ilustração; arte digital; arte analógica; técnicas de desenho; técnicas de modelagem
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2012_001
id	caadria2012_001
authors	Schnabel, Marc Aurel and Yingge Qu
year	2012
title	Digital manga virtual environment: Bi-tonal visualisation for texture-mapped virtual environments
doi	https://doi.org/10.52842/conf.caadria.2012.619
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 619–628
summary	Bi-tonal and non-photorealistic architectural depictions can be employed to develop a narrative that engages the reader with not only the visual aspects, but also other sensorial feelings. Architecture is subsequently not only represented through its factual dimensions of length, width and height, but is extended to intangible sensorial realms. This paper presents a modified rendering appearance of the graphical depiction of a Virtual Environments (VE) -software to communicate design akin to Japanese cartoon (manga) depictions whereby we expand the two-dimensional manga-images into a three-dimensional VE. The modified visualization can be used for storytelling and developing a narrative that professionals and laypersons alike easily can access, understand and interact. The bi-tonal depictions offer users to experience both, visual richness of the original model, as well as enhanced design communications.
keywords	Digital manga; virtual environments; architectural depiction; visual communication
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac201210203
id	ijac201210203
authors	Abdelhameed, Wael A.
year	2012
title	Micro-Simulation Function to Display Textual Data in Virtual Reality
source	International Journal of Architectural Computing vol. 10 - no. 2, 205-218
summary	Virtual reality creates an effective communication platform with a high degree of perception and exploration, increasing the benefits of VR applied functions.This research paper reports a virtual reality function of using the micro-simulation editor-player with XML file in the virtual reality environment.The details of the function are presented.The function aiming at combining visual and textual data in VR model visualisation, was developed by the researcher, and was included in the micro-simulation plug-in of a virtual reality program,VR Studio version 6, previously known as UC-Win/Road, by the program developers.The research paper discusses the computer simulation techniques and uses in virtual reality in general.The research paper proceeds to introduce a case study of construction process visualization in the virtual reality environment, in which the newly developed function is utilized to simultaneously visualise data reports related to the stages of VR model visualisation.The concluding remarks accentuate this micro-simulation function with its potential uses in different fields.
keywords	Micro-Simulation, XML,Virtual Reality, Construction Process Visualisation
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_009
id	ascaad2012_009
authors	Abdelmohsen, Sherif
year	2012
title	Genres of Communication Interfaces in BIM-Enabled Architectural Practice
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 81-91
summary	This paper explores the interaction and different types of representations enacted in a BIM-enabled environment that involves interdisciplinary and intradisciplinary collaboration among teams of designers in an architectural praxis context. By means of an ethnographic study conducted over the course of an architectural project from schematic design to construction documents, including five disciplines and twenty subjects, genres of communication interfaces are identified between BIM-authoring tools, sketching interfaces and domain specific analysis tools, and explored within the realm of distributed cognition. Implications in architectural practice and education are then discussed.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_009.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
wos	WOS:000330320600024
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_066
id	caadria2012_066
authors	Ahmad, Sumbul
year	2012
title	The representation of type in grammatical design
doi	https://doi.org/10.52842/conf.caadria.2012.425
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 425–432
summary	Grammatical design is useful for the generation of a set of related designs. The concept of type aids designers in generating designs with a specified structure. However, existing studies in grammar are ambiguous in their definition of type in the language of designs generated by a grammar. Extending our previous study of defining style in grammar, this paper provides a formal definition of the concept of type in the language of designs generated by a grammar. This is done with the help of a description scheme which is developed by augmenting grammar primitives and spatial relations with descriptors. The description scheme allows the computation of descriptors for designs generated from grammar thus making possible the comparison of various design types in the language of a grammar. Such a description scheme for defining design types is especially significant for less restricted grammars that generate a large number of designs that are varied in nature. A formal definition of type in grammars allows users to sift through designs with particular features, and thus select desired designs.
keywords	Type; Design grammars; generative design; description scheme; product design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

For more results click below: