Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_125
id	caadria2012_125
authors	Hanafin, S.; S. Datta, B. Rolfe, M. Hobbs
year	2012
title	Envelope tesselation with stochastic rotation of 4-fold penttiles
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 253–262
doi	https://doi.org/10.52842/conf.caadria.2012.253
summary	The challenge of developing adaptive, responsive low-energy architecture requires new knowledge about the complex and dynamic interaction between envelope architecture and optimisation between competing environmental performance metrics. Advances in modelling the geometry of building envelopes and control technologies for adaptive buildings now permit the sophisticated evaluation of alternative envelope configurations for a set of performance criteria. This paper reports on a study of the parametric control of a building envelope based on moveable façade components, acting as a shading device to reduce thermal gain within the building. This is investigated using a novel pentagonal tiling strategy considering the component design, tessellation and control methods.
keywords	Responsive envelopes; moveable façade components; parametric modelling; tiling geometry; stochastic rotation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2012_109
id	caadria2012_109
authors	Gerber, David; Mohamed M. ElSheikh and Aslihan Senel Solmaz
year	2012
title	Associative parametric design and financial optimisation - 'Cash Back 1.0': Parametric design for visualising and optimising Return on Investment for early stage design decision-making
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 47–56
doi	https://doi.org/10.52842/conf.caadria.2012.047
summary	Cash-Back 1.0 presents research on the development of methodologies and technologies to simulate the cause and effect of early stage geometric design alternatives of buildings and the real time results upon financial pro-forma. Through the encoding of design rules and their associative relationships to financial pro-forma the research illustrates enhanced visualization of early stage building design decisions and their cumulative impact on financial goals and constraints. The research presents value an associative parametric design process affords often-disparate domains through correlation and visualization. The paper describes incorporation of a feedback loop between pro-forma and geometric models in conjunction with an optimization method. Given the level of uncertainty in early stage design decision making the research contributes partial solutions to the domain problems of design decision uncertainty and design cycle latency and is further argumentation for increased use of parametric design methods and automation to support design domain integration.
keywords	Parametric design; genetic algorithm; design decision support; multi domain optimisation; domain integration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia12_67
id	acadia12_67
authors	Gerber, Dr. David Jason ; Lin, Shih-Hsin
year	2012
title	Synthesizing Design Performance: An Evolutionary Approach to Multidisciplinary Design Search
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 67-75
doi	https://doi.org/10.52842/conf.acadia.2012.067
summary	Design is a goal oriented decision-making activity. Design is ill defined and requiring of synthetic approaches to weighing and understanding tradeoffs amongst soft and hard objectives, and the imprecise and or computationally explicit criteria and goals. In this regard designers in contemporary practice face a crisis of sorts. How do we achieve performance under large degrees of uncertainty and limited design cycle time? How do we better design for integrating performance? Fundamentally design teams, are not typically given enough time nor the best tools to design explore, to generate design alternatives, and then evolve solution quality to search for best fit through expansive design solution spaces. Given the complex criteria for defining performance in architecture our research approach experiments upon an evolutionary and integrative computational strategy to expand the solution space of a design problem as well as pre-sort and qualify candidate designs. We present technology and methodology that supports rapid development of design problem solution spaces in which three design domains objectives have multi-directional impact on each other. The research describes the use of an evolutionary approach in which a genetic algorithm is used as a means to automate the design alternative population as well as to facilitate multidisciplinary design domain optimization. The paper provides a technical description of the prototype design, one that integrates associative parametric modeling with an energy use intensity evaluation and with a financial pro forma. The initial results of the research are presented and analyzed including impacts on design process; the impacts on design uncertainty and design cycle latency; and the affordances for ‘designing-in’ performance and managing project complexity. A summary discussion is developed which describes a future cloud implementation and the future extensions into other domains, scales, tectonic and system detail.
keywords	Parametric Design , Domain Integration , Design Methods , Multidisciplinary Design Optimization (MDO) , Evolutionary Algorithms , Design Decision Support , Generative Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2012_153
id	ecaade2012_153
authors	Kunze, Antje ; Dyllong, Julia ; Halatsch, Jan ; Waddell, Paul ; Schmitt, Gerhard
year	2012
title	Parametric building typologies for San Francisco Bay Area: A conceptual framework for the implementation of design code building typologies towards a parametric procedural city model
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 187-193
doi	https://doi.org/10.52842/conf.ecaade.2012.1.187
wos	WOS:000330322400018
summary	This research paper concentrates on a conceptual framework for the creation of high-level procedural city models. A workflow is presented, which enables users to create city models in an intuitive way by using design-code-driven building typologies. This drastically advances traditional procedural city modelling where usually low-level implementations of city model components take place. New planning methods and instruments have to be developed for the growing demand of the rapid environmental, social and economic changes in cities and agglomerations. The presented method allows for quick visualization and iteration by using urban planning typologies.
keywords	Procedural Modeling; Design Codes; Urban Planning; City Modeling; Decision-making process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2012_042
id	caadria2012_042
authors	Globa, Anastasia and Michael Donn
year	2012
title	Digital to physical: Comparative evaluation of three main CNC fabrication technologies adopted for physical modelling in architecture
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 327–336
doi	https://doi.org/10.52842/conf.caadria.2012.327
summary	Recently, digital fabrication, being a logical extension of computer-aided technology to the material world, was introduced into the field of computational design in architecture. The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of the main Computer Numerically Controlled (CNC) fabrication technologies adopted for physical modelling in architecture. This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models. This experimental research systematically explores digital fabrication as a computer-aided modelling tool, using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
keywords	Design process; digital fabrication; architectural model
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210401
id	ijac201210401
authors	Globa, Anastasia; Michael Donn, Simon Twose
year	2012
title	Digital To Physical: Comparative Evaluation Of Three Main CNC Fabrication Technologies Adopted For Physical Modelling In Architecture
source	International Journal of Architectural Computing vol. 10 - no. 4, 461-480
summary	The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of Computer Numerically Controlled fabrication technologies typically adopted for physical modelling in architecture.This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models.This experimental research systematically explores digital fabrication as a computer-aided modelling tool using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by the authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
series	journal
last changed	2019/05/24 09:55

_id	ijac201210109
id	ijac201210109
authors	Leitao, Antonio; Luis Santos, José Lopes
year	2012
title	Programming Languages For Generative Design: A Comparative Study
source	International Journal of Architectural Computing vol. 10 - no. 1, 139-162
summary	In the field of Generative Design (GD), Visual Programming Languages (VPLs), such as Grasshopper, are becoming increasingly popular compared to the traditional Textual Programming Languages (TPLs) provided by CAD applications, such as RhinoScript. This reaction is explained by the relative obsolescence of these TPLs and the faster learning curve of VPLs. However, modern TPLs offer a variety of linguistic features designed to overcome the limitations of traditional TPLs, making them hypothetical competitors to VPLs. In this paper, we reconsider the role of TPLs in the design process and we present a comparative study of VPLs and modern TPLs. Our findings show that modern TPLs can be more productive than VPLs, especially, for large-scale and complex design tasks. Finally, we identify some problems of modern TPLs related to portability and sharing of programs and we propose a solution.
series	journal
last changed	2019/07/30 10:55

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_043
id	caadria2012_043
authors	Lan, Wei-Hsien and Teng-Wen Chang
year	2012
title	Visualising the design process with dynamic graph
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 111–120
doi	https://doi.org/10.52842/conf.caadria.2012.111
summary	Design Process is a continuous decision-making movement. Yet, the designer usually executes the process in a jumping way, from state to the other. Nevertheless, this kind of jumping process would cause loss of some essential information, such as a glance of design, or certain process of shape evolvement which designers want to know. Those unrecorded and therefore missing statistics information are very important to the research of design thinking and process. This study employs an animation and comic as research objects. In addition to utilising the methods of thinking aloud and protocol analysis, as well as recording the progress of this experiment, the information is digitalised. By using computer to develop a webpage-interface visualisation cloud system, called Dynamic Graph System which records and collects the evolving data generated from the space design process and stores this information into the cloud database. The system, then, uses the State space as a base, and utilises the derivative Dynamic Graph of spatial style which is evolved from the collected data of the Design Process. By studying and analysing the dynamic graphs, to investigate whether we can acquire more information of design process by using information visualisation approach to record of the evolution of the design process and helped the designers or not. This study intends to explore whether Dynamic Graph System helps and assists the designer to be more efficient in completing his/her work from the interaction between Dynamic Graph System and the designer.
keywords	Design process; information visualisation; state space search; dynamic graph
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2012_190
id	sigradi2012_190
authors	Lima, Mariana; Ruschel, Regina Coeli; Silva, Glenda
year	2012
title	The use of simulation to evaluate design options on conceptual mass study phase
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 458-461
summary	This paper presents the results of an exploratory study developed with the Autodesk Project Vasari and AutoCAD Civil 3D. Project Vasari was used to evaluate the environmental performance of a low-income housing project. It shows us that the actual site orientation of the project presents poor environmental performance, which could be improved by rotating building in 90 degrees. The AutoCAD Civil 3D was used to evaluate how that rotation should impact on earthmoving. The results showed that the simulations developed, even though having low level of accuracy, provide sufficiently clear information to support decision making on conceptual mass project stage.
keywords	Simulation tools, Performance-based Design, conceptual mass studies
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia12_87
id	acadia12_87
authors	Menicovich, David ; Gallardo, Daniele ; Bevilaqua, Riccardo ; Vollen, Jason
year	2012
title	Generation and Integration of an Aerodynamic Performance Data Base Within the Concept Design Phase of Tall Buildings
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 87-96
doi	https://doi.org/10.52842/conf.acadia.2012.087
summary	Despite the fact that tall buildings are the most wind affected architectural typology, testing for aerodynamic performance is conducted during the later design phases well after the overall geometry has been developed. In this context, aerodynamic performance studies are limited to evaluating an existing design rather than a systematic performance study of design options driving form generation. Beyond constrains of time and cost of wind tunnel testing, which is still more reliable than Computational Fluid Dynamics (CFD) simulations for wind conditions around buildings, aerodynamic performance criteria lack an immediate interface with parametric design tools. This study details a framework for empirical data collection through wind tunnel testing of building mechatronic models and the expansion of the collected dataset by determining a mathematical interpolating model using an Artificial Neural Network (ANN) algorithm developing an Aerodynamic Performance Data Base (APDB). Frederick Keisler called the interacting of forces CO-REALITY, which he defined as The Science of Relationships. In the same article Keisler proclaims that the Form Follows Function is an outmoded understanding that design must demonstrate continuous variability in response to interactions of competing forces. This topographic space is both constant and fleeting where form is developed through the broadcasting of conflict and divergence as a system seeks balance and where one state of matter is passing by another; a decidedly fluid system. However, in spite of the fact that most of our environment consists of fluids or fluid reactions, instantaneous and geologic, natural and engineered, we have restricted ourselves to approaching the design of buildings and their interactions with the environment through solids, their properties and geometry; flow is considered well after the concept design stage and as validation of form. The research described herein explores alternative relations between the object and the flows around it as an iterative process, moving away from the traditional approach of Form Follows Function to Form Follows Flow.
keywords	Tall Buildings , Mechatronics , Artificial Neural Network , Aerodynamic Performance Data Base
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_93
id	ecaade2012_93
authors	Nicholas, Paul; Tamke, Martin
year	2012
title	Composite Territories: Engaging a Bespoke Material Practice in Digitally Designed Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 691-699
doi	https://doi.org/10.52842/conf.ecaade.2012.2.691
wos	WOS:000330320600074
summary	Today, material performance is regarded as one of the richest sources of innovation. Accordingly, architecture is shifting to practices by which the computational generation of form is directly driven by material characteristics. At the same time, there is a growing technological means for the varied composition of material, an extension of the digital chain that foregrounds a new need to engage materials at multiple scales within the design process. Recognising that the process of making materials affords perspectives not available with found materials, this paper reports the design and assembly of the fi bre reinforced composite structure Composite Territories, in which the property of bending is activated and varied so as to match solely through material means a desired form. This case study demonstrates how one might extend the geometric model so that it is able to engage and reconcile physical parameters that occur at different scales.
keywords	Composites; Material properties; Multi-scale
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ijac201210104
id	ijac201210104
authors	Ambrose, Michael A.
year	2012
title	Agent Provocateur - BIM In The Academic Design Studio
source	International Journal of Architectural Computing vol. 10 - no. 1, 53-66
summary	Building Information Modeling challenges academia to question the fundamental roles of abstraction and simulation in design education. Architectural education and practice assume a traditional set of visual conventions at varied scales and levels of detail, that when taken in concert signifies a whole, complete idea of a building, a correspondence between design intent and interpretation, between the representation of ideas and the design of buildings. BIM viewed as provocateur to these assumptions provides potential critical analysis of how architectural design is taught. Academia must seek out new design methodologies for exploring architecture that reflect the representational shift of BIM by developing teaching methods that reprioritize ways of seeing, thinking and making. This paper describes a studio model that seeks out new active methods for exploring architecture that embrace this shift by developing processes that provoke novel ways to reconcile the traditions of abstraction and the opportunities of synthetic simulation.
series	journal
last changed	2019/07/30 10:55

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_65
id	sigradi2012_65
authors	Garagnani, Simone; Mingucci, Roberto; Luciani, Stefano Cinti
year	2012
title	Collaborative design for existing architecture: the Building Information Modeling as a frontier for coordinated process
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 96-100
summary	Building Information Modeling (BIM) has been considered as an emerging collaborative strategy since its introduction, meant for AEC industry and heading to benefits in terms of costs and design quality during the whole building lifecycle. BIM approach, originally developed for new projects, can be successfully applied to existing contexts using TLS surveys to collect point clouds and turn them later into smart digital models, taking advantage of new technologies and methods. This paper addresses these themes paying attention to issues and opportunities, considering BIM as a paramount tool to collect and manage data destined to multiple disciplines
keywords	BIM; laser scanner; AEC digital tools; architectural modeling; collaborative design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2012_108
id	caadria2012_108
authors	Gerber, David and Shih-Hsin (Eve) Lin
year	2012
title	Designing-in performance through parameterisation, automation, and evolutionary algorithms: ‘H.D.S. BEAGLE 1.0’
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 141–150
doi	https://doi.org/10.52842/conf.caadria.2012.141
summary	Design is both a goal oriented and decision making activity. It is ill-defined by nature as designing includes weighing and understanding trade-offs amongst soft and hard objectives or in other words vague or imprecise and computationally definable criteria and goals. In this regard designers in most contemporary practices face a crisis of sorts. How do we achieve performance or sustainability under these large degrees of uncertainty or with limited design cycle times? Fundamentally design collaborations, teams of domain experts, are not typically given enough time to design-explore, generate design alternatives in order to find or evolve solution quality through expansive design search spaces. Given these limitations of time and the ever more complex criteria for ‘designing-in’ performance our research approach provides a computational strategy to expand the solution space as well as pre-sort and qualify candidate designs. The research presents a novel methodology and technology framework and an initial implementation that was developed to enhance the human activity of design exploration, domain integration, and further evolve design process for performance goals. The research does so through generating and optimising a highly correlated solution space in conjunction with a near simultaneous evaluation of design alternative fitness.
keywords	Parametric design; multi-disciplinary design optimisation (MDO); evolutionary algorithms; performative design process
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia12_15
id	acadia12_15
authors	Johnson, Jason Kelly; Cabrinha, Mark; Steinfeld, Kyle
year	2012
title	Synthetic Digital Ecologies
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 15-17
doi	https://doi.org/10.52842/conf.acadia.2012.015
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “… architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry …” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:52

_id	acadia12_000
id	acadia12_000
authors	Johnson, Jason; Cabrina, Mark and Steinfeld, Kyle (eds.)
year	2012
title	ACADIA 12: Synthetic Digital Ecologies
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), 588p.
doi	https://doi.org/10.52842/conf.acadia.2012
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “... architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry ...” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
email
last changed	2022/06/07 07:49

For more results click below: