Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2012_077
id	caadria2012_077
authors	Kelly, Nick and John S. Gero
year	2012
title	Computational modelling of the design conversation as a sequence of situated acts
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 121–130
doi	https://doi.org/10.52842/conf.caadria.2012.121
summary	This paper describes the design conversation as a sequence of situated acts. It distinguishes the research questions that require attention for the computation of a more situated design conversation; in terms of design actions and design interpretations. It presents an architecture for ‘more situated’ systems and describes some examples of implementation. The limitations and complexities of what has been achieved are identified.
keywords	Situatedness; situation; design conversation; situated computing
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2012_042
id	caadria2012_042
authors	Globa, Anastasia and Michael Donn
year	2012
title	Digital to physical: Comparative evaluation of three main CNC fabrication technologies adopted for physical modelling in architecture
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 327–336
doi	https://doi.org/10.52842/conf.caadria.2012.327
summary	Recently, digital fabrication, being a logical extension of computer-aided technology to the material world, was introduced into the field of computational design in architecture. The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of the main Computer Numerically Controlled (CNC) fabrication technologies adopted for physical modelling in architecture. This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models. This experimental research systematically explores digital fabrication as a computer-aided modelling tool, using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
keywords	Design process; digital fabrication; architectural model
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
doi	https://doi.org/10.52842/conf.acadia.2012.511
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	c4bd
id	c4bd
authors	Derix C, Gamlesæter A, Miranda P, Helme L and Kropf K
year	2012
title	Simulation Heuristics for Urban Design
source	In Mueller Arisona et al (eds), Digital Urban Modelling and Simulation: Communications in Computer and Information Science, Springer, Heidelberg, 2012
summary	Designing simulations for urban design not only requires explicit performance criteria of planning standards but a synthesis of implicit design objectives, that we will call ‘purpose rules’, with computational approaches. The former would at most lead to automation of the existing planning processes for speed and evaluation, the latter to an understanding of perceived urban qualities and their effect on the planning of cities. In order to transform purpose rules into encoded principles we argue that the focus should not be on defining parametric constraints and quantities, but on aligning the perceptual properties of the simulations with the strategies of the stakeholders (planner/ urban designer/ architect/ developer/ community). Using projects from the Computational Design and Research group at Aedas [CDR] as examples, this chapter will discuss how an open framework of lightweight applications with simple functionality can be integrated into the design and planning process by using computational simulations as urban design heuristics.
keywords	urban design, design heuristics, meta-heuristics, simulation, algorithm visualization
series	book
type	normal paper
email
more	http://www.springerlink.com/content/g58114676q4228h8/?MUD=MP
last changed	2012/09/20 14:17

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
doi	https://doi.org/10.52842/conf.caadria.2012.465
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2012_315
id	ecaade2012_315
authors	Fleischmann, Moritz ; Menges, Achim
year	2012
title	Physics-Based Modeling as an alternative approach to geometrical constrain-modeling for the design of elastically-deformable material systems
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 565-575
doi	https://doi.org/10.52842/conf.ecaade.2012.1.565
wos	WOS:000330322400058
summary	Physics-Based Modelling can be considered as an alternative approach to geometrical constrain-based modelling for form-active material systems such as gridshells. Here we explain a vector-based method that works in R2 and R3 to determine momentum forces at the node level, which can easily be implemented into (existing) particle systems and - together with the simulation of tension and compression forces - can be used to model the behavior of such material systems.
keywords	Computational Design; Physics-Based Modelling; Springs; Bending; Material Behaviour
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2012_110
id	caadria2012_110
authors	McGee, Wes; David Pigram and Maciej P. Kaczynski
year	2012
title	Robotic reticulations: A method for the integration of multi-axis fabrication processes with algorithmic form-finding techniques
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 295–304
doi	https://doi.org/10.52842/conf.caadria.2012.295
summary	This paper addresses the design and fabrication of non-uniform structural shell systems. Structural shells, particularly gridshells, have a long history but due to their complexity and the accompanying high cost of construction, their application has been limited. The research proposes a method for integrating the design and fabrication processes such that complex double curved reticulated frames can be constructed efficiently, from prefabricated components, requiring significantly less formwork than is typical. A significant aspect of the method has been the development of software tools that allow for both algorithmic form-finding and the direct control of robotic fabrication equipment from within the same modelling package. A recent case-study is examined where the methodology has been applied to construct a reticulated shell structure in the form of a partial vault. Components were prefabricated using 6-axis robotic fabrication equipment. Individual parts are designed such that the assembly of components guides the form of the vault, requiring no centring to create the desired shape. Algorithmically generated machine instructions controlled a sequence of three tool changes for each part, using a single modular fixture, greatly increasing accuracy. The complete integration of computational design techniques and fabrication methodologies now enables the economical deployment of non-uniform structurally optimised reticulated frames.
keywords	Reticulated frame; robotic fabrication; dynamic relaxation; form-finding; computational design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia15_211
id	acadia15_211
authors	Melsom, James; Girot, Christophe; Hurkxkens, Ilmar
year	2015
title	Directed Deposition: Exploring the Roles of Simulation and Design in Erosion and Landslide Processes
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 211-221
doi	https://doi.org/10.52842/conf.acadia.2015.211
summary	Working with and against environmental processes, such as the movement of water, earth, and rock, and terrain, has been a perpetual challenge since the dawn of civilisation. While it has been possible to gradually tame many landscapes to perform in a predictable manner, there are many circumstances where we are forced to live with and around such processes in everyday life. This research is primarily interested in the potential of design to interact with such processes. Specifically, we are interested in the designed redirection of erosion and landslide processes already observable in nature, taking the urbanised hillsides of the Alps as test case scenario. The research specialisation continues a research and design focus specialised on processes material deposition of river and flood systems, further down the water catchment chain (REF: ANON 2012). This specific alpine research is compelling in the context of Anthropocene processes, we are specifically focussed in the appraisal, harnessing and redirection of existing environmental phenomena, given what can be understood as our inevitable interaction with these processes (Sijmons 2015). Within this broader research, which has ecological, cultural, and formal potential, this paper shall explore the practical aspects of connecting design, and the designer, with the potential for understanding and designing these evolving mountain landscapes. There is a long history behind the development of landscape elements which control avalanches, mud, rock, and landslides. The cultural, functional and aesthetic role of such elements in the landscape is relatively undiscussed, epitomising an approach that is primarily pragmatic in both engineering and expense. It is perhaps no surprise that these elements have a dominant physical and visual presence in the contemporary landscape. Through the investigation of synergies with other systems, interests, and design potential for such landscape elements, it is proposed that new potential can be found in their implementation. This research proposes that the intuitive linking of common design software to direct landslide simulation, design of and cultural use can interact with these natural processes. This paper shall demonstrate methods to within which design can enter the process of landscape management, linking the modelling processes of the landscape designer with the simulation capabilities of the specialised engineer.
keywords	Landscape Design Workflows, Landscape Simulation, Terrain Displacement, Material Flow, Erosion Processes, Interdisciplinary Workflows
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_069
id	ecaade2012_069
authors	Pitts, Gregg ; Luther, Mark
year	2012
title	A Parametric Approach to 3D Massing and Density Modelling
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.157-165
doi	https://doi.org/10.52842/conf.ecaade.2012.1.157
wos	WOS:000330322400015
summary	This paper addresses the current void between social agendas, environmental criteria and design methodology in urban planning through the implementation of new computational systems. It considers the application of digital design tools such as GIS and parametric systems towards more effi cient and effective design solutions. The digital design methods have been developed and tested within Grimshaw Architects Design Technology Group on both Australian and international urban development projects. A methodology for the use of parametric design for urban design development is suggested for defi ning, simplifying and categorising planning and design strategies. The following tools are a means of generating urban design concepts as digital forms in order to better inform the designer during the design process.
keywords	Parametric; Urbanism; Sustainability
series	eCAADe
last changed	2022/06/07 08:00

_id	ascaad2012_006
id	ascaad2012_006
authors	Taron, Joshua M.
year	2012
title	Structurally Intelligent Swarms: Exploiting Interoperability Toward Generative Design
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 33-47
summary	The potential afforded by the open search spaces of both agent-based models and evolutionary engines have given architecture yet another set of computational tools to play with, yet more often than not, they are used in isolation from one another. This research explores the set of techniques and results of having combined swarm formations, FEM software and an evolutionary engine within a parametric modeling environment such that they induce structurally intelligent swarm (SIS) morphologies. These morphologies are situated within normative architectural assemblies by means of parametric grafting techniques. Savage gothic materiality, as described by John Ruskin, as well as the work of Eva Hesse are referenced as the basis for these explorations. Speculations are made as to refining the engineering capabilities, expanding on programmatic applications and testing integrated SIS assemblies at larger scales.
series	ASCAAD
type	normal paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_006.pdf
last changed	2021/07/16 10:39

_id	ijac201210401
id	ijac201210401
authors	Globa, Anastasia; Michael Donn, Simon Twose
year	2012
title	Digital To Physical: Comparative Evaluation Of Three Main CNC Fabrication Technologies Adopted For Physical Modelling In Architecture
source	International Journal of Architectural Computing vol. 10 - no. 4, 461-480
summary	The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of Computer Numerically Controlled fabrication technologies typically adopted for physical modelling in architecture.This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models.This experimental research systematically explores digital fabrication as a computer-aided modelling tool using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by the authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
series	journal
last changed	2019/05/24 09:55

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	ecaade2012_5
id	ecaade2012_5
authors	Biloria, Nimish; Chang, Jia-Rey
year	2012
title	HyperCell: A Bio-Inspired Information Design Framework for Real-Time Adaptive Spatial Components
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 573-581
doi	https://doi.org/10.52842/conf.ecaade.2012.2.573
wos	WOS:000330320600061
summary	Contemporary explorations within the evolutionary computational domain have been heavily instrumental in exploring biological processes of adaptation, growth and mutation. On the other hand a plethora of designers owing to the increasing sophistication in computer aided design software are equally enthused by the formal aspects of biological organisms and are thus meticulously involved in form driven design developments. This focus on top-down appearance and surface condition based design development under the banner of organic architecture in essence contributes to the growing misuse of bio-inspired design and the inherent meaning associated with the terminology. HyperCell, a bio-inspired information design framework for real-time adaptive spatial components, is an ongoing research, at Hyperbody, TU Delft, which focuses on extrapolating bottom-up generative design and real-time interaction based adaptive spatial re-use logics by understanding processes of adaptation, multi-performance and self sustenance in natural systems. Evolutionary developmental biology is considered as a theoretical basis for this research.
keywords	Adaptation; Swarms; Evo-Devo; Simulation: Cellular component
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_022
id	ascaad2012_022
authors	Borham, Ahmad; Lobna Sherif and Osama Tolba
year	2012
title	Resilient Rules - Culture and Computation in Traditional Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 211-221
summary	This study explores the influence of the socio-cultural rules, based upon Islamic jurisprudence (fiqh), on the complexity of the traditional built environment. This system of rules organized the societal activities, including decisions and activities related to design and construction in the Arab-Islamic city. Considering the city as a complex system, the study will try to show how this rules system made the Arab-Islamic city resilient and adaptive. Complex Adaptive Systems (CAS) are non-linear, self-organizing systems that have the ability to adapt to changing conditions through changing the rules that organize the random autonomous interactions between agents in the environment. This adaptation takes place through gradual gained experience that is reflected in the behavior of agents. This study attempts to interrelate different bodies of literature (Complexity/Chaos theory and built environment studies) in a single framework that aims to show that the socio-cultural rules system based on fiqh was a major factor in the resilience of the traditional built environment. These interrelations are illustrated using a graph called Computational Rules Graph (CRG). The CRG relates the traditional rules system to attributes of complex systems in a graph that can be modeled computationally. Traditional rules (codes of conduct) are proscriptive (non-deterministic), defining what is prohibited, thereby producing autonomous environments where agents had control over their immediate environment. In comparison, contemporary rules of the built environment (building codes) are prescriptive (deterministic), subscribing definite actions that need to take place by the stake-holder (agent) neglecting user needs and preferences. The application of these traditional rules system increased the agent’s autonomy and freedom of action. It also helped establish stronger social networks among agents, which resulted in a resilient environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_022.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_267
id	ecaade2012_267
authors	Caldas, Luísa G. ; Santos, Luís
year	2012
title	Generation of Energy-Efficient Patio Houses with GENE_ARCH: Combining an Evolutionary Generative Design System with a Shape Grammar
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 459-470
doi	https://doi.org/10.52842/conf.ecaade.2012.1.459
wos	WOS:000330322400047
summary	GENE_ARCH is a Generative Design System that combines Pareto Genetic Algorithms with an advanced building energy simulation engine. This work explores its integration with a Shape Grammar, acting as GENE_ARCH’s shape generation module. The urban patio house typology is readdressed in a contemporary context, both by improving its energy-effi ciency standards, and by rethinking its role in the genesis of high-density urban areas, while respecting its specifi c spatial organization and cultural grounding. Field work was carried out in Marrakesh, surveying a number of patio houses which became the Corpus of Design, from where a Shape Grammar was extracted. The computational implementation of the patio house grammar was done within GENE_ARCH. The resulting program was able to generate new, alternative patio houses designs that were more energy effi cient, while respecting the traditional rules captured from the analysis of existing houses. After the computational system was fully implemented, it was possible to complete different sets of experiments. The first experiments kept more restrained rules, thus generating new designs that closer resembled the existing ones. The progressive relaxation of rules and constraints allowed for a larger number of variations to emerge. Analysis of energy results provide insight into the main patterns resulting from the evolutionary search processes, namely in terms of form factors of generated solutions, and urban densities achieved.
keywords	Generative Design Systems; Genetic Algorithms; Shape Grammars; Patio Houses; Energy Efficiency
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: