Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201210406
id	ijac201210406
authors	Biswas, Tajin; Ramesh Krishnamurti
year	2012
title	Data Sharing for Sustainable Building Assessment
source	International Journal of Architectural Computing vol. 10 - no. 4, 555-574
summary	Sustainable design assessment requires information, which is aggregated from different phases of a building design, and evaluated according to criteria specified in a ‘sustainable building rating system.’ In the architecture engineering and construction (AEC) domain much of the necessary information is available through open source data standards such as Industry Foundation Classes (IFC). However, no single standard that provides support for sustainability assessment completely suffices as a data structure. This paper explores the augmentation of the Construction Operations Building information exchange (COBie) model, as an intermediary data structure, to bridge between requirements of the Leadership in Energy and Environmental Design (LEED) rating system and a building information model. Development of a general framework for data sharing and information management for LEED assessments is illustrated through an implementation of a prototype using functional databases.The prototype checks and augments available data as needed, which is used to populate LEED submission templates.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2012_155
id	sigradi2012_155
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Pluripotent Structures: An Exploration into Digital Design & Fabrication by Bio Mimicry
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 665-668
summary	This project is an exploration into the design & fabrication process of a canopy structure derived from the notion of pluripotency. The term is widely used in the context of stem cells in biological science where pluripotency is referred to the potential of a stem cell to develop into more than one type of mature cell, depending on environment. These can be re-interpreted architecturally as, the quality of design components or elements to be radically transformed into one or more different kinds of components, keeping the general structural integrity of the design unchanged (Kolatan, 2009). Consequently, the pluripotent canopy design is a 3 dimensional double curved surface , having smart pluripotent components populated over its domain, which parametrically has the potential to be transformed to more than one different kinds of elements, keeping the same parameters of construction for each component.
keywords	Stem Cell Concept; Pluripotency in Nature; Digital Prototyping; Voronoi Geometry
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_139
id	acadia12_139
authors	Erioli, Alessio ; Zomparelli, Alessandro
year	2012
title	Emergent Reefs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 139-148
doi	https://doi.org/10.52842/conf.acadia.2012.139
summary	The Emergent Reefs project thrives on the potential that emerge from a coherent utilization of the environment’s inherent ecological structure for its own transformation and evolution, using an approach based on digitally simulated ecosystems and sparkled by the possibilities and potential of large-scale 3D printing technology. Considering tourism as an inevitable vector of environmental change, the project aims to direct its potential and economic resources towards a positive transformation, providing a material substrate for the human-marine ecosystem integration with the realization of spaces for an underwater sculpture exhibition. Such structures will also provide a pattern of cavities which, expanding the gradient of microenvironmental conditions, break the existing homogeneity in favor of systemic heterogeneity, providing the spatial and material preconditions for the repopulation of marine biodiversity. Starting from a digital simulation of a synthetic local ecosystem, a generative technique based on multi-agent systems and continuous cellular automata (put into practice from the theoretical premises in Alan Turing’s paper “The Chemical basis of Morphogenesis” through reaction-diffusion simulation) is implemented in a voxel field at several scales giving the project a twofold quality: the implementation of reaction diffusion generative strategy within a non-isotropic 3-dimensional field and integration with the large-scale 3D printing fabrication system patented by D-Shape®. Out of these assumptions and in the intent of exploiting the expressive and tectonic potential of such technology, the project has been tackled exploring voxel-based generative strategies. Working with a discrete lattice eases the simulation of complex systems and processes across multiple scales (including non-linear simulations such as Computational Fluid-Dynamics) starting from local interactions using, for instance, algorithms based on cellular automata, which then can be translated directly to the physical production system. The purpose of Emergent-Reefs is to establish, through strategies based on computational design tools and machine-based fabrication, seamless relationships between three different aspects of the architectural process: generation, simulation and construction, which in the case of the used technology can be specified as guided growth.
keywords	emergence , reef , underwater , 3D printing , ecology , ecosystem , CFD , agency , architecture , tourism , culture , Open Source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_097
id	caadria2012_097
authors	Grace, Kazjon S.; John S. Gero and Rob Saunders
year	2012
title	Constructing computational associations between ornamental designs
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 37–46
doi	https://doi.org/10.52842/conf.caadria.2012.037
summary	This paper presents the application of a computational model of association to the domain of real-world ornamental designs. The driving principle of the model, interpretation-driven association, is discussed with respect to its suitability to design applications. An implementation of the model is presented, in which associations are constructed based on topological and typological relationships within each design's structure, rather than based on literal similarities. Results are presented which demonstrate that the implementation and the model from which it was derived are capable of associating between real-world design objects.
keywords	Design association; design interpretation; computational modelling; ornamental designs
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia12_169
id	acadia12_169
authors	Helm, Volker ; Ercan, Selen ; Gramazio, Fabio ; Kohler, Matthias
year	2012
title	In-Situ Robotic Construction: Extending the Digital Fabrication Chain in Architecture
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 169-176
doi	https://doi.org/10.52842/conf.acadia.2012.169
summary	In this paper, viable applications of mobile robotic units on construction sites are explored. While expanding on potential objectives for in-situ fabrication in the construction sector, the intention is also to build upon innovative man-machine interaction paradigms to deal with the imprecision and tolerances often faced on construction sites. By combining the precision of the machine with the cognitive environmental human skills, a simple but effective mobile fabrication system is experimented for the building of algorithmically designed additive assemblies that would not be possible through conventional manual methods if the large amount of individual building blocks and the size of the structure to be built are taken into account. It is believed that this new approach to man-machine collaboration, aimed at a deeper integration of human ability with the strengths of digitally controlled machines, will result in advances in the construction sector, thus opening up new design and application fields for architects and planners.
keywords	in-situ robotic fabrication , mobile robotics , 1:1 scale fabrication , additive assembly , algorithmically designed structures , man-machine interaction , cognitive , object recognition , construction site
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2012_128
id	ecaade2012_128
authors	Ryu, Jung Rim; Kim, Seung Bae; Kim, Jun Gyu; Lee, Sang Bok; Choo, Seung Yeon
year	2012
title	Everyone has Idea, Everyone Can Be Architect: Our First Step for Finding a Good Architecture
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 667-676
doi	https://doi.org/10.52842/conf.ecaade.2012.2.667
wos	WOS:000330320600072
summary	It is an immutable truth that architecture ultimately exists for humans. Similarly, it is a well-known fact that countless architectural concepts derived and evolved to restrain development, to control building projects and to consider environment are eventually for the benefit of humans. Architecture today, however, is in the hands of a few renowned architects even though it is supposed to refl ect human beings and times and to work for everyone. Is it too much to say that everyone should have a say in the space used by many? In that respect, we have devised DADL System. Anyone, Anytime, Anywhere. The system is an architectural game that stimulates human instincts, has online communities and is easily accessible by Anyone Anytime and Anywhere (3A Rules). DADL System aims to gather users’ ideas and develop architecture, which is essentially enabled by the ‘Advise’ feature. Advise is designed to lead users to think about architecture voluntarily and to guide them to express their ideas. The structure and contents of Advises are very important factors in DADL System. Also, it is divided into two domains, i.e. Web and Mobile, where data exchange is enabled via cloud computing, establishing a base in compliance with the ‘3A’ Rules. The DADL System supports the architecture of everyone without relying on opinions of a few, so as to open the infi nitive potential for communication between architecture and humans, which today’s architecture should advocate.
keywords	Digital Architecture; Design Creativity; Social Network Service; Web-based Design; Communication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2012_017
id	ascaad2012_017
authors	Simeone, Davide; Antonio Fioravanti
year	2012
title	An Ontology-Based Template of User-Actor to Support Agent-Based Simulation in Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 171-179
summary	The behavior of a human being in a building, its activities, its interactions with it and with other people are certainly a highly complex phenomenon extremely hard to predict and evaluate. At the same time, the response of a built environment to future users’ needs is one of the key factors of its performance. The Agent-based Modeling paradigm is considered potentially the best way to represent human behavior but, in the building design field, its experiences are limited to representation of partial aspects of human behavior in discrete events. Currently, a more "extended" representation of human behavior able to offer an overview of the human activities related to the building ‘functioning’, is missing,. This lack is due to the complexity of interaction among users and built environment, and to the extensive knowledge, provided by different disciplines, needed to reliably represent it. The proposed research focuses on the construction of a general representation template of user-actor, easy to implement and flexible enough to structure the large amount of data affecting human behavior. The development of the ontology-based template shown in this paper can lead to a user-agent’s entity whose parameters and behavioral rules can encode and represent several ‘aspects’ of real users and their interactions with the other entities (building components, furniture, other people) in a built environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_017.pdf
last changed	2012/05/15 20:46

_id	caadria2012_108
id	caadria2012_108
authors	Gerber, David and Shih-Hsin (Eve) Lin
year	2012
title	Designing-in performance through parameterisation, automation, and evolutionary algorithms: ‘H.D.S. BEAGLE 1.0’
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 141–150
doi	https://doi.org/10.52842/conf.caadria.2012.141
summary	Design is both a goal oriented and decision making activity. It is ill-defined by nature as designing includes weighing and understanding trade-offs amongst soft and hard objectives or in other words vague or imprecise and computationally definable criteria and goals. In this regard designers in most contemporary practices face a crisis of sorts. How do we achieve performance or sustainability under these large degrees of uncertainty or with limited design cycle times? Fundamentally design collaborations, teams of domain experts, are not typically given enough time to design-explore, generate design alternatives in order to find or evolve solution quality through expansive design search spaces. Given these limitations of time and the ever more complex criteria for ‘designing-in’ performance our research approach provides a computational strategy to expand the solution space as well as pre-sort and qualify candidate designs. The research presents a novel methodology and technology framework and an initial implementation that was developed to enhance the human activity of design exploration, domain integration, and further evolve design process for performance goals. The research does so through generating and optimising a highly correlated solution space in conjunction with a near simultaneous evaluation of design alternative fitness.
keywords	Parametric design; multi-disciplinary design optimisation (MDO); evolutionary algorithms; performative design process
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2012_147
id	ecaade2012_147
authors	Huang, Yinghsiu; Hsieh, Kai-Wei; Chen, Huan-Nian
year	2012
title	The Emotional Design by Combining Interactive Technologies and Imaginations
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 361-368
doi	https://doi.org/10.52842/conf.ecaade.2012.2.361
wos	WOS:000330320600037
summary	In product design domain, designers have to deal with not only the interface between human and hardware, but also the emotions while using products. However, imagination is an important ability in all design stages. How designers could combine interactive devices and emotions with their imaginations is the main problem of this research. At the end of this paper, the result will demonstrate an interactive and emotional design by combining some sensors to receive the usage from people, and some reactions to express products’ emotions. By wiring photosensitive resistor, pressure sensor, red LED, speakers, and programing in ARDUINO, this study assembled an emotional alarm, which can express his angry emotions by different levels of noise, lighting, and shocking. In this study, we conducted a workshop not only for combining interactive sensors into products, but also for expressing emotions in viewpoints from products. During this workshop, students have to trigger their imaginations for conceiving emotional products, which they have never seen and thought of.
keywords	Imagination; product design; emotional; interactive design; ARDUINO
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2012_199
id	ecaade2012_199
authors	Varoudis, Tasos
year	2012
title	Augmented Visibility: A Visibility Graph Analysis for Hybrid Architectural Spaces
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 401-409
doi	https://doi.org/10.52842/conf.ecaade.2012.2.401
wos	WOS:000330320600042
summary	The introduction of digital technologies in architecture formed new relations between space and people that are affected by the redefi nitionof the spatial properties. Ambient projections can augment walls creating hybrid spatial confi gurations without changing the physical morphology of space. Such augmentations allow space to be transformed into a dynamic environment where visual boundaries are dissolved. This paper argues that in order to adapt our understanding of spatial analysis we need to look space as a dual system of physical and virtual properties incorporating human’s behavioural and perceptional changes.Extending the idea of visibility graph analysis by using the ‘augmented visibility’ representation, which includes a joined set of spaces in both physical and virtual domain, the paper presents interesting fi nding and correlations with data fromexperiment observations.
keywords	Augmented visibility; ambient displays; human navigation; hybrid space; visibility graph analysis
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_279
id	ecaade2012_279
authors	Marcos, Carlos L.
year	2012
title	Beyond Phenomenal or Literal Transparency: Physical Digitality
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 551-560
doi	https://doi.org/10.52842/conf.ecaade.2012.2.551
wos	WOS:000330320600058
summary	The interesting distinction established by Collin Rowe and Robert Slutzky regarding the concept of transparency in modern architecture can be further enriched in relation to digital architecture and the new ways in which architects may address the design of material limits. The polarity between materiality and virtuality, between being and appearance is challenged with the concept of eversion and could lead to what we have referred to as virtual transparency. The intricate performative latticed skins designed and fabricated thanks to C.A.D./C.A.M. techniques have produced different states of transparent visual effects that either conceal or partially suggest silhouettes producing latticed transparencies. Finally, the development of next generation liquid crystal displays may introduce highly responsive transparent membranes in architecture allowing a one step further virtual transparency that could be described as translucent transparency.
keywords	Phenomenal transparency; eversion; virtual transparency; latticed transparency; translucent transparency
series	eCAADe
last changed	2022/06/07 07:59

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_066
id	caadria2012_066
authors	Ahmad, Sumbul
year	2012
title	The representation of type in grammatical design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 425–432
doi	https://doi.org/10.52842/conf.caadria.2012.425
summary	Grammatical design is useful for the generation of a set of related designs. The concept of type aids designers in generating designs with a specified structure. However, existing studies in grammar are ambiguous in their definition of type in the language of designs generated by a grammar. Extending our previous study of defining style in grammar, this paper provides a formal definition of the concept of type in the language of designs generated by a grammar. This is done with the help of a description scheme which is developed by augmenting grammar primitives and spatial relations with descriptors. The description scheme allows the computation of descriptors for designs generated from grammar thus making possible the comparison of various design types in the language of a grammar. Such a description scheme for defining design types is especially significant for less restricted grammars that generate a large number of designs that are varied in nature. A formal definition of type in grammars allows users to sift through designs with particular features, and thus select desired designs.
keywords	Type; Design grammars; generative design; description scheme; product design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_021
id	caadria2012_021
authors	Al-Saati, Maha Zeini; David Botta and Robert Woodbury
year	2012
title	Architects on architectural film and animation
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 637–646
doi	https://doi.org/10.52842/conf.caadria.2012.637
summary	As part of our inquiry about the practice of architectural film and animation and where it might go, this paper presents the results of interviews with architects on space, and on animation. We present their rich sense of space, and explain how they structure architectural film and animation. We found that architects wish to convey the subjective impact of design, but don’t know how to connect film editing techniques to architectural ends. Computational design could fill this gap with, for example, drag-and-drop editing patterns.
keywords	Architectural film and animation; concepts of architectural space
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
wos	WOS:000330320600046
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_192
id	sigradi2012_192
authors	Andres, Carolina Reichert; Minuzzi, Reinilda
year	2012
title	Cultmapas urbanos [Urban cultmaps]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 38-42
summary	This research aims to address the catalog urban interventions as graffiti, stencil and sticker spotted in association with the city. As a result, they develop artistic urban mappings which assemble a structure marking the artistic manifestations. The urban arts, are georeferenced and eventually become part of a catalografia which can be viewed on the web entitled Cultmap art.
keywords	arte e tecnologia, mapeamentos artísticos, graffiti, web arte
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
wos	WOS:000330322400051
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_247
id	ecaade2012_247
authors	Balaban, Özgün; Kilimci, Elif Sezen Yagmur; Cagdas, Gülen
year	2012
title	Automated Code Compliance Checking Model for Fire Egress Codes
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 117-125
doi	https://doi.org/10.52842/conf.ecaade.2012.2.117
wos	WOS:000330320600011
summary	Architecture today has come to its most complex form. There are lots of criteria such as fi re safety, structure, sustainability etc… which must be controlled by the designers. To improve the performance and accessibility of buildings, governing bodies publish different codes for each of the different criteria. Buildings must comply with these codes to get a permit for construction. The checking of the buildings according the codes is done manually by code offi cials. This process is time consuming, high in cost and prone to errors. To remedy this problem by using the tools like BIM and AI, systems that can automatically check the code compliance of projects are being developed. In this paper we provide an overview of the structures and capabilities of these systems and present the automated code compliance checking system that we develop for checking building models against some parts of the Turkish Fire Codes.
keywords	Automated Code Compliance Checking; Fire Codes; BIM
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
doi	https://doi.org/10.52842/conf.caadria.2012.527
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: