Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_491
id	acadia12_491
authors	Feringa, Jelle ; Søndergaard, Asbjørn
year	2012
title	An Integral Approach to Structural Optimization and Fabrication
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 491-497
doi	https://doi.org/10.52842/conf.acadia.2012.491
summary	Abstract Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure. A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase, the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive. This paper reports ongoing research efforts on the development of a cost effective methodology for the realization of TO concrete structures using HWC.
keywords	Topology optimization , robotics , hotwire cutting , ruled surfaces , advanced concrete structures , formwork , EPS
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	ecaade2012_261
id	ecaade2012_261
authors	Feringa, Jelle; Sondergaard, Asbjorn
year	2012
title	Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500
doi	https://doi.org/10.52842/conf.ecaade.2012.2.495
wos	WOS:000330320600052
summary	Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC) (Mcgee 2011). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure (Sondergaard & Dombernowsky 2011). A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase (Xie 2010), the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive.
keywords	Topology optimization; robotics; hotwire cutting; EPS formwork; concrete structures
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
doi	https://doi.org/10.52842/conf.acadia.2012.209
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_231
id	acadia12_231
authors	Bell, Brad
year	2012
title	Parametric Precast Concrete Panel System
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 231-238
doi	https://doi.org/10.52842/conf.acadia.2012.231
summary	The working hypothesis of this research focuses on the potential of utilizing a digital toolset to engage information within a surrounding context for the purpose of creating a more intelligent pre-cast concrete panel system. The Parametric Pre-Cast Concrete Panel System is a research project attempting to parametrically define geometry for the purpose of producing formwork based on quantitative information related to issues such as environmental control systems, sound abatement, as well as qualitative information like non-standard variation paneling, and aesthetic composition.
keywords	Energy , form , structures , performance , simulation , prototyping , precast , concrete
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	caadria2012_024
id	caadria2012_024
authors	Brell-Cokcan, Sigrid; Johannes Braumann, Baris Cokcan and Martin Kleindienst
year	2012
title	Just in time design: Developing parametric design tools for architectural design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 455–464
doi	https://doi.org/10.52842/conf.caadria.2012.455
summary	In this paper we will present custom design and parametric programming strategies for the design of complex spatial structures based on our applied research for a 10.000 m² freeform technology centre in Düzce, Turkey. The goal is to develop intuitive, easy-to-use parametric design components for layout, analysis, optimisation and aesthetic architectural free form design.
keywords	Parametric design; freeform architecture; quadrilateral meshes; software development; fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_116
id	ecaade2012_116
authors	Doelling, Max ; Nasrollahi, Farshad
year	2012
title	Building Performance Modeling in Non-simplified Architectural Design Procedural and cognitive challenges in education
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.97-106
doi	https://doi.org/10.52842/conf.ecaade.2012.1.097
wos	WOS:000330322400009
summary	The building technology class “Parametric Design” simultaneously teaches thermal and daylight performance simulation to novice users, usually Master of Architecture students. Own buildings are created, analysed and geometrically modified during the design process, resulting in structures that are energetically pre-optimized. It is shown that energy demand and daylight utilization can be signifi cantly improved while taking into account formal considerations. Departing from a design process model that gives preference to either engineering or design thinking, multi-modal decision-making is diagnosed to be mediated by hybrid or multivalent representations, necessitating a shift in how inter-domain design knowledge flows might be understood. Opposed to purely linear or iterative process assumptions, a fluent state model of interconnected domains of analytic inquiry is proposed.
keywords	Sustainable design; daylight simulation; thermal simulation; architectural education; design epistemology
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia12_139
id	acadia12_139
authors	Erioli, Alessio ; Zomparelli, Alessandro
year	2012
title	Emergent Reefs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 139-148
doi	https://doi.org/10.52842/conf.acadia.2012.139
summary	The Emergent Reefs project thrives on the potential that emerge from a coherent utilization of the environment’s inherent ecological structure for its own transformation and evolution, using an approach based on digitally simulated ecosystems and sparkled by the possibilities and potential of large-scale 3D printing technology. Considering tourism as an inevitable vector of environmental change, the project aims to direct its potential and economic resources towards a positive transformation, providing a material substrate for the human-marine ecosystem integration with the realization of spaces for an underwater sculpture exhibition. Such structures will also provide a pattern of cavities which, expanding the gradient of microenvironmental conditions, break the existing homogeneity in favor of systemic heterogeneity, providing the spatial and material preconditions for the repopulation of marine biodiversity. Starting from a digital simulation of a synthetic local ecosystem, a generative technique based on multi-agent systems and continuous cellular automata (put into practice from the theoretical premises in Alan Turing’s paper “The Chemical basis of Morphogenesis” through reaction-diffusion simulation) is implemented in a voxel field at several scales giving the project a twofold quality: the implementation of reaction diffusion generative strategy within a non-isotropic 3-dimensional field and integration with the large-scale 3D printing fabrication system patented by D-Shape®. Out of these assumptions and in the intent of exploiting the expressive and tectonic potential of such technology, the project has been tackled exploring voxel-based generative strategies. Working with a discrete lattice eases the simulation of complex systems and processes across multiple scales (including non-linear simulations such as Computational Fluid-Dynamics) starting from local interactions using, for instance, algorithms based on cellular automata, which then can be translated directly to the physical production system. The purpose of Emergent-Reefs is to establish, through strategies based on computational design tools and machine-based fabrication, seamless relationships between three different aspects of the architectural process: generation, simulation and construction, which in the case of the used technology can be specified as guided growth.
keywords	emergence , reef , underwater , 3D printing , ecology , ecosystem , CFD , agency , architecture , tourism , culture , Open Source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2012_263
id	sigradi2012_263
authors	Espina, Jane
year	2012
title	Procesos, Metodología y Prácticas en Urbanismo: flujo continuo de datos e información en sectores urbanos de la ciudad [Processes, and Practices Methodology Urbanism: continuous flow of data and information in city’s urban areas]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 294-298
summary	Technology provides new digital tools for the benefit of the Planning and Urban Design. The goal of this paper is to show a methodology for the interpretation and analysis of the urban site in the city of Maracaibo, Venezuela; and its implementation as academic experience in the Department of Urban Planning. The use of digital and communication technologies in teaching strategies and instructional resources, achieved profits in the teaching-learning process, optimized collection processes, organization and flow of data and information, understanding of the urban fact. Tools used: mobile telephony, internet, browsers, applications, improving communication between students, student-teacher, student-teacher-community.
keywords	Work Methodology; Planning; Urban Areas; Digital Technology; Interpretation and Site Analysis
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ecaade2012_004
id	ecaade2012_004
authors	Hanzl, Ma_gorzata
year	2012
title	Schizoanalytical Digital Modelling for Urban Design: Incorporating the indexed keys methodology into the anthropological analyses of urban structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 177-186
doi	https://doi.org/10.52842/conf.ecaade.2012.1.177
wos	WOS:000330322400017
summary	Schizoanalytical digital modelling serves description of processes occurring in urban settings. Schizoanalysis serves to ‘meta-model’ the everyday world around us, where ‘meta’ means inclusion of different perspectives. The paper formulates few hyphotheses concerning the relation between the crowd of people representing a specifi c culture and the urban settings, which constitute their habitus. The methodology of analysis of urban structure is proposed, which is based on the urban closures cross-sections analysis with the use of Line of Site method (LOs), as complimentary to the Space Syntax methodology of pedestrian simulation and analysis of fi eld of sight, based on isovists. The paper presents the results of the descriptive analysis of the former Jewish district in Lodz, research on which is to be developed with the methodology proposed.
keywords	Anthropology; schizoanalyses; geomatics; urban design; urban morphology
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_152
id	ecaade2012_152
authors	Krieg, Oliver David; Mihaylov, Boyan; Schwinn, Tobias; Reichert, Steffen; Menges, Achim
year	2012
title	Computational Design of Robotically Manufactured Plate Structures Based on Biomimetic Design Principles Derived from Clypeasteroida
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 531-540
doi	https://doi.org/10.52842/conf.ecaade.2012.2.531
wos	WOS:000330320600056
summary	The paper presents the current development of an ongoing research project about the integration of robotic fabrication strategies in computational design through morphological and functional principles derived from natural systems. Initially, a developed plate structure material system based on robotically fabricated fi nger joints is being informed by biomimetic principles from the sea urchin Clypeasteroida in order to be able to adapt effi ciently to its building environment. Consequently, the paper’s main focus lies on translating the biomimetic design principles into a computational design tool, also integrating fabrication parameters as well as structural and architectural demands. The design tool’s capability to integrate these parameters is shown by the design, development and realization of a full-scale research pavilion. The paper concludes with discussing the performative capacity of the developed material system and the introduced methodology.
keywords	Biomimetics; Digital Simulation; Parametric Design; Robotic Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2012_95
id	ecaade2012_95
authors	Ladurner, Georg; Gabler, Markus; Menges, Achim; Knippers, Jan
year	2012
title	Interactive Form-Finding for Biomimetic Fibre Structures: Development of a Computational Design Tool and Physical Fabrication Technique Based on the Biological Structure of the Lichen
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 519-529
doi	https://doi.org/10.52842/conf.ecaade.2012.2.519
wos	WOS:000330320600055
summary	This contribution shows a biomimetic approach to design and produce fibrous structural elements derived from the morphology of the biologic archetype ‘the lichen’. The physical form fi nding strategy allows for a novel self-organised reinforcement for fibrous composite systems. A computational design tool has been developed, based on the fi ndings of various physical models. The digital device allows for shape control and therefore an interaction to and manipulation of the fabrication process. Since the form fi nding algorithms of the tool are based on physical experiments,every geometry is derived through the program and has its counterpart in production. For example: the fibre density in the model can be adjusted which leads to different geometries. In production the chosen denseness is utilised, thus, the production yields automatically to the desired load-optimized geometry found in the form-finding tool.
keywords	Biomimetics; Form-finding; Self-organization; Emergence; Fibre structures
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia12_269
id	acadia12_269
authors	Lally, Sean
year	2012
title	Architecture of an Active Context
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 269-276
doi	https://doi.org/10.52842/conf.acadia.2012.269
summary	As we stand with our feet on earth’s outermost surface we build an architecture today that is much like it was several thousand years earlier, in an attempt to extend that outer shell with one of our own making. Artificial masses are built from a refinement of this existing geologic layer into materials of stone, steel, concrete, and glass that assemble to produce new pockets of space through the buildings they create. However, the sixth century BC writer Thales of Miletus put a different perspective on this: he insisted that we live, in reality, not on the summit of a solid earth but at the bottom of an ocean of air (Holmyard 1931). And so, as architecture continues to build up the outermost layer of earth’s surface through a mimicking, embellishing, and enhancing of the materials which it comes from, it raises the question of why we have not brought a similar relationship to the materialities at the bottom of this “ocean” of air to create the spaces we call architecture. If you were looking to level a complaint with the architectural profession, stating that it has not been ambitious enough in scope would not be one. Architects have never shied away from the opportunity to design everything from the building’s shell to the teaspoon used to stir your sugar in its matching cup. But it would seem that the profession has developed a rather large blind spot in terms of what it sees as a malleable material with which to engage. Architects have made assumptions as to what is beyond our scope of action, refraining from engaging a range of material variables due to a belief that the task would be too great or simply beyond our physical control. So even though we are enveloped by them continuously, both on the exterior as well as the interior of our buildings, it must be assumed that the particles, waves, and frequencies of energy that move around us are thought by architects to be too faint and shaky to unload upon them any heavy obligations, that they are too unwieldy for us to control to create the physical boundaries of separation, security, and movement required of architecture. This has resulted in a cultivated set of blinders that essentially defines architecture as a set of mediation devices (surfaces, walls, and inert masses) for tempering the environmental context it is situated in from the individuals and activities within. The spaces we inhabit are defined by their ability to decide what gets in and what stays out (sunlight, precipitation, winds). We place our organizational demands and aesthetic opinions on the surfaces that mediate these variables rather than seeing them as available for manipulation as a building material on their own. The intention here is to recalibrate the materialities that make up that environmental context to build architecture. The starting point is a rather naive question: can we design the energy systems that course in and around us daily as an architectural material so as to take on the needs of activities, securities, and lifestyles associated with architecture? Can the variables that we would normally mediate against instead be heightened and amplified so as to become the architecture itself? That which many would incorrectly dismiss as simply “air” today—thought to be homogeneous, scale-less, and vacant due in part to the limits of our human sensory system to perceive more fully otherwise—might tomorrow be further articulated, populated, and layered so as to become a materiality that will build spatial boundaries, define activities of individuals and movement, and act as architectural space. Our environmental context consists of a diverse range of materials (particles and waves of energy, spectrum of light, sound waves, and chemical particles) that can be manipulated and formed to meet our needs. The opportunity before us today is to embrace the needs of organizational structures and aesthetics by designing the active context that surrounds us through the material energies that define it.
keywords	Material energies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2012_292
id	ecaade2012_292
authors	Reinhardt, Dagmar ; Martens, William ; Miranda, Luis
year	2012
title	Acoustic Consequences of Performative Structures Modelling Dependencies between Spatial Formation and Acoustic Behaviour
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 577-586
doi	https://doi.org/10.52842/conf.ecaade.2012.1.577
wos	WOS:000330322400059
summary	The paper discusses an interdisciplinary exchange between parametric design and acoustic simulation. It reviews a strategic development of temporary dynamic structures that can be manipulated by intersecting variations of formation in generative architecture with acoustic simulation. The research investigates drivers that interface knowledge between parametric design, structural engineering and fabrication, interaction design and acoustics, and theatre and performance. It reviews the simulation of a temporary theatre installation into an existent industrial hall, whereby different formation of a modular structure are explored, and the acoustic effects of this installation are evaluated in relation to an enhancement of the audiences spatial and acoustic experience. The research goes beyond the morphological, aesthetic or structural values that have become key aspects of contemporary digital architecture, and relates them to the field of auralisation (forecasting acoustic behaviour). In that manner, the simulation and analysis of a future (material, spatial) objects is developed through the communication of an interdisciplinary team, thus exploring synergetic qualities of the physical and the digital.
keywords	Computational design; generative geometries; acoustic simulation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia12_457
id	acadia12_457
authors	Shook, David ; Sarkisian, Mark
year	2012
title	Weighted Metrics: Synthesizing Elements for Tall Building Design
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 457-466
doi	https://doi.org/10.52842/conf.acadia.2012.457
summary	Salient attributes of previously designed projects can be examined to understand how key parameters could inform current design practices. These parameters include gross floor area, number of stories, occupancy, material type, geographic location, seismicity, climatic influences, etc. Two informative analysis tools for intelligent design have been developed which can be used from preliminary planning stages to the final design of individual structures to district-wide developments. These tools can evaluate concurrent influences of these parameters on the built environment. The first is the Environmental Analysis Tool™ (EA Tool). The EA Tool quantifies the estimated equivalent carbon dioxide emissions of structural components. The second analysis tool is Parametric City Modeling (PCM). PCM estimates the usable area of a tower by estimating net floor area. These tools can also be applied to multiple buildings at a district scale to facilitate a new level of design in urban planning efforts. Design information embodied in the physical built environment finds new purpose in the informative prediction of performance at the on-set of digital design. Harvesting and mining data as a natural resource brings new potential to informed design. These concepts and subsequent tools are vital to building sustainable and efficient cities of the future.
keywords	Data Harvesting , Sustainability , Building Efficiency , Urban Planning , Parametric Design , Optimization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2012_176
id	ecaade2012_176
authors	Tessmann, Oliver
year	2012
title	Topological Interlocking Assemblies
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 211-219
doi	https://doi.org/10.52842/conf.ecaade.2012.2.211
wos	WOS:000330320600021
summary	Topological interlocking is a concept developed in material science. Solid modules form a structural system without the use of glue or mortar. Given fixed boundaries the elements constrain each other kinematically. This project seeks to re-conceptualize the system within an architectural framework by embracing computational design, analysis and fabrication tools and procedures. The goal is to develop geometrical differentiated, reversible, force-locked systems and the processes and methods to design and manufacture them. Students of the Architecture and Performative Design Studio (APD) at the Staedelschule Architecture Class (SAC) and the author developed the presented projects. The paper discusses the pedagogical approach of starting a design research studio from a very narrow material system. The research is continued at the School of Architecture of the Royal Institute of Technology (KTH) in Stockholm.
keywords	Digital Fabrication; Parametric Design; Topology, Structure; Modular
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_059
id	ecaade2012_059
authors	Wurzer, Gabriel ; Popov, Nikolay ; Lorenz, Wolfgang E.
year	2012
title	Meeting Simulation Needs of Early-Stage Design Through Agent-Based Simulation
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 613-620.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.613
wos	WOS:000330322400064
summary	During early-stage planning, numerous design decisions are taken in an argumentative manner, based on occupation with the building site according to the different infl uencing aspects (e.g. topology, wind, visibility, circulation, activities etc.). In this context, sketches, diagrams and spreadsheets are the workhorses for elaboration. However, some of these phenomena are dynamic by nature, and are rather poorly modeled when utilizing static media. In our work, we thus show how agent-based simulation can be used to compute and visualize dynamic factors, in order to inform the decision process on a qualitative level. As a matter of fact, simulations may be used as a design tool in their own right, for analysis and objectifi ed comparison among multiple design variations.
keywords	Agent-Based Simulation; Early-Stage Planning; NetLogo; Design Process.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia13_449
id	acadia13_449
authors	Yogiaman, Christine; Tracy, Ken
year	2013
title	Cast Thicket
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 449-450
doi	https://doi.org/10.52842/conf.acadia.2013.449
summary	Cast Thicket is a prototypical instillation that furthers earlier research into tensile concrete molds through the use of plastic formwork and a layered structural network. Leveraging the fluid materiality of concrete and the machinability of polypropylene, Cast Thicket creates a lacy network of thin members that disperse and coalesce to address structural and spatial needs. Proposed as an application for tall concrete buildings, the research responds to the 2012 APPLIED: Research through Fabrication competition.
keywords	dynamic tensile network, flexible plastic, formwork, thin tensile concrete structure, optimized, kangaroo spring
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:57

_id	ecaade2012_319
id	ecaade2012_319
authors	Stavric, Milena; Kaftan, Martin
year	2012
title	Robotic Fabrication of Modular Formwork for Non-Standard Concrete Structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 431-437
doi	https://doi.org/10.52842/conf.ecaade.2012.2.431
wos	WOS:000330320600045
summary	In this work we address the fast and economical realization of complex formwork for concrete with the advantage of industrial robot arm. Under economical realization we mean reduction of production time and material effi ciency. The complex form of individual formwork parts can be in our case double curved surface of complex mesh geometry. We propose the fabrication of the formwork by straight or shaped hot wire. We illustrate on several projects different approaches to mould production, where the proposed process demonstrates itself effective. In our approach we deal with the special kinds of modularity and specific symmetry of the formwork.
keywords	Robotic fabrication; formwork; non-standard structures
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: