Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 546

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_127
id	ecaade2012_127
authors	Burry, Jane; Goscinski, Wojec; Aranda-Mena, Guillermo; Alhadidi, Suleiman; Pena de Leon, Alex; Williams, Mani
year	2012
title	Trade Off and Real Time Analysis Feedback for Designers: Sailing as a Research Vehicle for Developing Systems and Skills
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 543-550
doi	https://doi.org/10.52842/conf.ecaade.2012.2.543
wos	WOS:000330320600057
summary	This paper describes the investigation and outcomes of a workshop aiming to answer the dual questions of how best to link technologies and how best to harness expert knowledge to capture and integrate dynamic performance feedback in the design process. In order to focus on these intrinsic questions, the workshop moved outside the domain most familiar to most of the participants, the built environment, and introduced the participants to design and performance feedback for what, to most, was the new domain of sailing and sail design. It resulted in novel and valuable prototypical systems for analysis and feedback to inform immediate design iteration. It achieved this through problem decomposition and synthetic design activity engaging integrated models and prototypes with components from multiple players and sources of informed or expert knowledge or knowing.
keywords	Design feedback; nested systems; sailing; interaction design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2012_011
id	ascaad2012_011
authors	Hemsath, Timothy L.
year	2012
title	Hybridizing Digital Fabrication Techniques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 103-114
summary	The use of digital fabrication in the production and making of architecture is becoming a prevalent vehicle for the design process. As a result, there is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, parametric modeling and digital fabrication in student education. This paper will highlight three student projects that look to ingrate computational prototyping with digital fabrication techniques in the production of architecture. The goal is to hybridize fabrication techniques of sectioning, tessellating and folding to educate students in CAD, CAM, parametric modeling and digital fabrication. Rather than repeating conventional approaches or recreating from precedent, mixing techniques challenges students to understand the CAD technique or parameters for modeling, translate for CAM production and deal with real world constraints of materials, time and tectonics. In the end, these projects are critical of the digital and projectively speculate on the architectural detail in an age of digital ubiquity.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_011.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_236
id	ecaade2012_236
authors	Meyboom, AnnaLisa; Strzala, Marcin; Wojtowicz, Jerzy
year	2012
title	reCHARGE w/ ROBO: Electric Vehicle Infrastructure Design Studio
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 43-48
doi	https://doi.org/10.52842/conf.ecaade.2012.2.043
wos	WOS:000330320600003
summary	Current emerging urban infrastructure increasingly depends on control systems and the understanding and application of these systems in design can create re-imagined urban spaces. The use of this technical fi eld of mechatronics in architecture requires interdisciplinary collaboration and a working understanding of control systems, sensors and actuators. Through a research and related graduate design studio, this paper discusses the potential for reimagining urban infrastructure in relation to the electric vehicle recharging process. The new infrastructure of the electric vehicle recharging station provides an interruptive urban site for applying the technology as well as for developing synergistic adjacent programs.
keywords	Design; Architectronics; Robo Design Studio; Electric Vehicle; Infrastructure
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
doi	https://doi.org/10.52842/conf.caadria.2013
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ascaad2012_009
id	ascaad2012_009
authors	Abdelmohsen, Sherif
year	2012
title	Genres of Communication Interfaces in BIM-Enabled Architectural Practice
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 81-91
summary	This paper explores the interaction and different types of representations enacted in a BIM-enabled environment that involves interdisciplinary and intradisciplinary collaboration among teams of designers in an architectural praxis context. By means of an ethnographic study conducted over the course of an architectural project from schematic design to construction documents, including five disciplines and twenty subjects, genres of communication interfaces are identified between BIM-authoring tools, sketching interfaces and domain specific analysis tools, and explored within the realm of distributed cognition. Implications in architectural practice and education are then discussed.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_009.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	caadria2012_131
id	caadria2012_131
authors	Ambrose, Michael A.
year	2012
title	Digital conception(s): Architectural concepts of digital design and making
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 699–708
doi	https://doi.org/10.52842/conf.caadria.2012.699
summary	This paper presents an investigation of probative works of architectural thought and production executed in various forms of digital design and computational media. The applied design research focuses on an examination of the procedure or process constructed to both develop exact, precise digital models and constructed processes that result in design outcomes that cannot be pre-visioned. The changing position of the conceptualisation within the design process continually changes the relationship of the digital work and the computational framework. The work challenges one to interpret design processes of translation and transformation, through the continual oscillation between developed in pursuit of known results and constructed methods for making, in an effort to unravel the pretext of the singular point of view to reveal the intention of the design conception(s). The projects discussed here focus on relationships between the projection of space in architectural representation and the production of architectural form through complex geometries relative to discontinuities and the way in which they agitate and alter one another. DIGITAL conception(s) operate across three primary areas of research; animation, conceptualisation and fabrication. The work oscillates between digital and physical artefacts that intertwine digital/physical workflows while simultaneously engaging temporal issues of time based media through motion graphics and animate constructs.
keywords	Design representation; visualisation; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
wos	WOS:000330320600044
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_439
id	acadia12_439
authors	As, Imdat ; Angelico, Maria
year	2012
title	Crowdsourcing Architecture: A Disruptive Model in Architectural Practice
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 439-443
doi	https://doi.org/10.52842/conf.acadia.2012.439
summary	This paper discusses the use of crowdsourcing as a new approach for architectural design acquisition. We will give an overview of the concept of crowdsourcing, and elaborate on its particular application in architecture via concrete projects executed on Arcbazar, a firstof- its-kind crowdsourcing platform for architectural design services. We argue that online crowdsourcing platforms can have an immense impact on smaller-scale design challenges, e.g., home remodeling projects and landscape and interior design challenges, and can potentially carry these often neglected projects into the architectural design sphere. In this paper we will discuss the methods and techniques of architectural crowdsourcing and illustrate the processes and outcomes through a series of projects: a remodeling project for a closet; an interior design challenge for a dining space; and a layout problem for an apartment complex. We will then evaluate the protocol and outcome of architectural crowdsourcing, and convey the professional and popular media response to this new method of architectural design acquisition.
keywords	crowdsourcing , competitions , networking , interaction , collaboration
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_39
id	ecaade2012_39
authors	Asanowicz, Aleksander
year	2012
title	Design: Analogue, Digital, and Somewhere in Between
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 273-280
doi	https://doi.org/10.52842/conf.ecaade.2012.2.273
wos	WOS:000330320600027
summary	The problem considered in this paper is: “In what way do we design?” This paper concentrates on the early creative stages of the design process during which the designer gradually gathers the information about the problem, applying appropriate rules, tools and media. If the tools are chosen as a starting point of consideration, designing may be analysed as manual or digital. If we chose the medium - design may be considered as physical or virtual. The main thesis of this paper is that designing proceeds somewhere in between. “Somewhere in between” means the space where manual, digital, virtual are mixing, overlapping, and transforming one into the other. As a case study the process of designing of blurred function object is presented. In this experimental design studio we paid particular attention to the design process and we searched for the answer to the following questions: how to find an idea (what tools/media are helpful), how to express, fi x and transform that idea? In the paper the examples of students’ work will be presented and discussed.
keywords	Creativity; digital design methods; mixed methods of design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_290
id	ecaade2012_290
authors	Barakat, Merate
year	2012
title	Urban Acoustic Simulation: Analysis of Urban Public Spaces through Auditory senses
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 587-592
doi	https://doi.org/10.52842/conf.ecaade.2012.1.587
wos	WOS:000330322400060
summary	This paper explores the sonic characteristics of urban spaces, with the application of apprehending acoustic space and form theory. The theory defines auditory spaces as acoustical arenas, which are spaces defi ned and delineated by sonic events. Historically, cities were built around a soundmark, for example, the resonance of a church bell or propagation of a calling for prayer, or a factory horn. Anyone living beyond the horizon of this soundmark was not considered citizens of that town. Furthermore, the volume of urban sonic arenas depends on natural. Digital simulation is necessary to visualize the ephemeral and temporal nature of sound, within a dynamic immersive environment like urban spaces. This paper digitally analyses the different morphologies of old cities and forms of growth in relation to the sound propagation and ecological effects. An experiment is conducted with the aid of an ancient North-African city model, exposed to a point cloud agent system. By analysing how the sound propagates from the known soundmark through the urban fabric, with the wind pressure interference; the paper compares the theoretical concept of soundmarks and the known perimeter of the ancient city
keywords	Urban Public Spaces; Aural Design; Auditory Arena Simulation; Soundmark
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2012_012
id	ascaad2012_012
authors	Bhzad Sidawi
year	2012
title	The Possible Role of CAAD Systems in Initiating Innovation in the Design Studio
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 117-128
summary	Design is a social phenomenon and the previous research highlights that design precedents and social interaction between designers including negotiation, collaboration and communications is essential to initiate creativity and the production of innovative design products. CAAD systems aim is to help the architect in formulating and developing design ideas. Researchers suggest that knowledge based systems can be integrated with CAAD systems so it would provide the architect with design knowledge that would him/ her to recall design precedents/ solutions thus link it to the design problems. Nevertheless, CAAD systems can provide limited help regarding the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is focused on architects rather than the end product. On the other hand, most of the CAAD systems have web communication tools that enable designers to communicate their with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to produce innovative design products.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_012.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_96
id	ecaade2012_96
authors	Bila, Jiri; Jura, Jakub
year	2012
title	Interpretation of Emergent Situations in Conceptual Design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 605-612
doi	https://doi.org/10.52842/conf.ecaade.2012.2.605
wos	WOS:000330320600065
summary	Interpretation process is usually oriented to some purposes, e.g., for identifi cation, for explanation, for inference, for translation, etc. By the interpretation in this paper is understood not only the explanation of a confi guration of signs (symbols) in general (how it functions or how it works within a higher whole). This general interpretation is oriented in our paper to conceptual design and it is modifi ed to the goal of the solved problem. The concept of emergent situation was defi ned in general and in special case of interpretation process in conceptual design. A limited model of the description of interpretation process was introduced as a semiotic phenomenon on connections of Interpretation Space and Sign Model. Two relevant cases of interpretation process were introduced. The condition of induction of emergence in interpretation process was formulated.
keywords	Modelling; interpretation; interpretation space; sign model; emergent phenomena
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_115
id	caadria2012_115
authors	Biswas, Tajin; Tsung-Hsien Wang and Ramesh Krishnamurti
year	2012
title	Data sharing for sustainable assessments: Using functional databases for interoperating multiple building information structures
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 193–202
doi	https://doi.org/10.52842/conf.caadria.2012.193
summary	This paper presents the development and implementation of an automatic sustainable assessment prototype using functional databases. For the practical purpose, we use Leadership in Energy and Environmental Design (LEED) as the exemplar standard to demonstrate the integrative process from building information aggregation to final evaluation. We start with a Building Information model, and use Construction Operations Building Information Exchange (COBie) as a bridge to integrate LEED requirements. At present, the process of sustainable building assessment requires information exchange from various building professionals. However, there is no procedure to manage, or use, information pertaining to sustainability. In our research, we translate rules from LEED into computable formulas and develop a prototype application to produce templates for LEED submission.
keywords	Building information databases; sustainable assessment
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

For more results click below: