Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_274
id	ecaade2012_274
authors	Sharaidin, Kamil; Salim, Flora
year	2012
title	Design Considerations for Adopting Kinetic Facades in Building Practice
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 629-637
doi	https://doi.org/10.52842/conf.ecaade.2012.2.629
wos	WOS:000330320600068
summary	Interactive architecture plays an increasingly important role in today’s building practice. This includes design and implementation of kinetic facades. However, in the age of digital architecture, design and construction of kinetic facade has been under-explored and not well practically implemented. Hence, new design approach to integrate kinetic facade and architecture is needed for physical and content integration, instead of the traditional design approach. The ultimate objective of this study is to formulate a suitable design method to integrate kinesis with a building. Furthermore, this research aims to establish effective tectonics for kinetic facades through the exploration of different perspectives of practitioners involved directly with kinetic facades.
keywords	Kinetic facades; building practice; design consideration; early design stages; practitioner
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac201210104
id	ijac201210104
authors	Ambrose, Michael A.
year	2012
title	Agent Provocateur - BIM In The Academic Design Studio
source	International Journal of Architectural Computing vol. 10 - no. 1, 53-66
summary	Building Information Modeling challenges academia to question the fundamental roles of abstraction and simulation in design education. Architectural education and practice assume a traditional set of visual conventions at varied scales and levels of detail, that when taken in concert signifies a whole, complete idea of a building, a correspondence between design intent and interpretation, between the representation of ideas and the design of buildings. BIM viewed as provocateur to these assumptions provides potential critical analysis of how architectural design is taught. Academia must seek out new design methodologies for exploring architecture that reflect the representational shift of BIM by developing teaching methods that reprioritize ways of seeing, thinking and making. This paper describes a studio model that seeks out new active methods for exploring architecture that embrace this shift by developing processes that provoke novel ways to reconcile the traditions of abstraction and the opportunities of synthetic simulation.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_022
id	ascaad2012_022
authors	Borham, Ahmad; Lobna Sherif and Osama Tolba
year	2012
title	Resilient Rules - Culture and Computation in Traditional Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 211-221
summary	This study explores the influence of the socio-cultural rules, based upon Islamic jurisprudence (fiqh), on the complexity of the traditional built environment. This system of rules organized the societal activities, including decisions and activities related to design and construction in the Arab-Islamic city. Considering the city as a complex system, the study will try to show how this rules system made the Arab-Islamic city resilient and adaptive. Complex Adaptive Systems (CAS) are non-linear, self-organizing systems that have the ability to adapt to changing conditions through changing the rules that organize the random autonomous interactions between agents in the environment. This adaptation takes place through gradual gained experience that is reflected in the behavior of agents. This study attempts to interrelate different bodies of literature (Complexity/Chaos theory and built environment studies) in a single framework that aims to show that the socio-cultural rules system based on fiqh was a major factor in the resilience of the traditional built environment. These interrelations are illustrated using a graph called Computational Rules Graph (CRG). The CRG relates the traditional rules system to attributes of complex systems in a graph that can be modeled computationally. Traditional rules (codes of conduct) are proscriptive (non-deterministic), defining what is prohibited, thereby producing autonomous environments where agents had control over their immediate environment. In comparison, contemporary rules of the built environment (building codes) are prescriptive (deterministic), subscribing definite actions that need to take place by the stake-holder (agent) neglecting user needs and preferences. The application of these traditional rules system increased the agent’s autonomy and freedom of action. It also helped establish stronger social networks among agents, which resulted in a resilient environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_022.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_020
id	ascaad2012_020
authors	Bouchahm, Yasmina; Fatiha Bourbia and Bouketta Samira
year	2012
title	Numerical Simulation of Effect of Urban Geometry Layouts on Wind and Natural Ventilation Under Mediterranean Climate
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 195-202
summary	The use of the method "simulation" of the microclimate for an urban site presents much of interest; because this can serve as us observation and analysis of the consequences of various scenarios relating to the existence and the importance of the constituent elements in urban space. Wind in outdoor urban space is among the most difficult parameters to identify and control field given its instability. Currently, in the field of the ventilation, there are some outdoor spaces simulation tools, used to assess the flow of the wind at different spatial scales. The aim of this research is to demonstrate the effect of the urban geometry of the layout on the wind movement and the outdoor natural ventilation. However, this study investigated the effect on outdoor thermal comfort of a building layouts in a planned residential area situated in the city of Jijel humid Mediterranean region of Algeria. In order to improve outside comfort in this open space, a 3D numerical simulation tool ENVI-met 3.1 beta 4 was used to simulate the urban thermal climate taking into account various scenarios. Thus, simulation’s results are discussed in this paper
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_020.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_303
id	ecaade2012_303
authors	Cheng, Nancy Yen-wen
year	2012
title	Shading With Folded Surfaces: Designing With Material, Visual and Digital Considerations
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 613-620
doi	https://doi.org/10.52842/conf.ecaade.2012.2.613
wos	WOS:000330320600066
summary	This paper analyses a hybrid design approach; how physical and digital processes can inform each other in a multivalent design cycle. It describes the design of origami-inspired window shades, part of the Shaping Light project that explores how adjustable surface structures can modulate light levels and heat gain in response to the changing seasons. The screen uses sloped surfaces to diffuse light and create apertures that close when the screen is stretched and open when the screen is folded. The project complements digital methods for pattern proportioning and kinetic simulation with manual manipulation to generate 3D folding motifs and refi ne assemblies. Physical prototypes can shape digital refi nement by revealing visual and structural characteristics of materials, along with joint and production considerations. Physical models for simulating sunny and cloudy daylighting conditions provide a direct connection between spatial confi guration and visual effects. The paper concludes with guidelines for material-based digital-analog creation.
keywords	Architectural design process; digital fabrication; shading devices; origami
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	acadia12_37
id	acadia12_37
authors	Fagerström, Gustav ; Hoppermann, Marc ; Almeida, Nuno ; Zangerl, Martin ; Rocchetti, Stefano ; Van Berkel, Ben
year	2012
title	Softbim: An Open Ended Building Information Model in Design Practice
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 37-46
doi	https://doi.org/10.52842/conf.acadia.2012.037
summary	In this paper we present examples from architectural practice in which our definition of the softBIM method has been used to some extent. We discuss its advantages and disadvantages in relation to its use in early project phases. The goal of this study is to propose an integrative, schematic and open-ended model for dealing with complex assemblies of geometric and non-geometric project data, aiming to remain non-reliant on specific software packages.
keywords	BIM , Building Information Modeling , Attributes , Metadata , Early phases design , Open source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia12_429
id	acadia12_429
authors	Fox, Michael ; Polancic, Allyn
year	2012
title	Conventions of Control: A Catalog of Gestures for Remotely Interacting With Dynamic Architectural Space
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 429-438
doi	https://doi.org/10.52842/conf.acadia.2012.429
summary	The intent of this project is to create a catalogue of gestures for remotely controlling dynamic architectural space. This research takes an essential first step towards facilitating the field of architecture in playing a role in developing an agenda for control. The process of the project includes a sequence carried out in four stages: 1) Research of gestural control 2) Creating an initial catalogue of spatial architectural gestures 3) Real-world testing and evaluation and 4) Refining the spatial architectural gestures. In creating a vocabulary for controlling dynamic architectural environments, the research builds upon the current state-of-the-art of gestural control which exists in integrated touch- and gesture-based languages of mobile and media interfaces. The next step was to outline architecturally specific dynamic situational activities as a means to explicitly understand the potential to build gestural control into systems that make up architectural space. A proposed vocabulary was then built upon the cross-referenced validity of existing intuitive gestural languages as applied to architectural situations. The proposed gestural vocabulary was then tested against user-generated gestures in the following areas: frequency of "invention", learnability, memorability, performability, efficiency, and opportunity for error. The means of testing was carried out through a test-cell environment with numerous kinetic architectural elements and a Microsoft Kinect Sensor to track gestures of the test subjects. We conclude that the manipulation of physical building components and physical space itself is more suited to gestural physical manipulation by its users instead of control via device, speech, cognition, or other. In the future it will be possible, if not commonplace to embed architecture with interfaces to allow users to interact with their environments and we believe that gestural language is the most powerful means control through enabling real physical interactions.
keywords	Gesture , Interactive , Remote , Control , Architecture , Intuition , Physical , Interface
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2012_025
id	ascaad2012_025
authors	Hamani, Dalil and Jean Michel Olive
year	2012
title	Information System to Improve the Building Production Management Cooperative Work in Design and Architectural Production
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 253-270
summary	Our work is to enable partners of a construction project (building owner, architect, engineer, etc.) to share all the technical data produced and manipulated during the building process, by setting up interfaces for an accessible information system via the internet. Our system would be able to deliver an answer to a user to a particular question asked. The system links databases and allows building partners to access and to manipulate specific information. This paper covers the information structure model based on building construction knowledge and the access to user-relevant information. First, the paper aims to establish the state of the art of the information systems available today in the building construction field. Second, we present the contribution of our research to the description of the building elements (foundations, ramps, stairs, etc.), where information is share by partners who are distant from one another and focused on fields of expertise that are distinct but concurrent. Our system links distributed databases and provides an updated building representation that is being enriched and refined all along the building life cycle. It consists of 3D representations of the building as well as data that are associated with each graphical entity (walls, slabs, beams, etc.).
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_025.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_153
id	sigradi2012_153
authors	Kaufmann, Stefan; Petzold, Frank
year	2012
title	Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245
summary	In the time since European architects first began using computers in the building design process, the digital revolution has transformed how architects use planning tools completely. Today, digital tools are an indispensable part of planning practice. Besides a wide variety of digital modeling tools, parametric tools offer architects diverse options for generating cybernetic building models as BIM-models or homeostatic parametric geometry models. Cybernetic models help us to describe the buildings as a system and can improve planning efficiency. The aim of planning is to construct or fabricate an end result. The integration of digital fabrication methods in the digital chain is a fundamental goal if architects are to benefit from the progressive development of computer controlled machine tools. Fabrication integrated digital models can automate the planning process up to the production stage and enable the efficient fabrication of building components. The increased efficiency of planning and fabrication has facilitated a growing proliferation of buildings of increasing geometric complexity. Computers can open a door to the realization of new forms, spaces and construction systems to architects that understand the principles of fabrication-integrated cybernetic modeling.
keywords	didactic; parametric design; digital fabrication; CIM;
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2012_191
id	ecaade2012_191
authors	Krijnen, Thomas ; Beetz, Jakob ; Voorthuis, Jacob ; Vries, Bauke de
year	2012
title	Explauralisation: The experience of exploring architecture made audible
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 593-598
doi	https://doi.org/10.52842/conf.ecaade.2012.1.593
wos	WOS:000330322400061
summary	In this paper we propose an open source design tool that allows designers to easily conceive, evaluate and design the full auditory experience of a building, based on a digital three-dimensional model. A guiding principle has been the dynamic nature of the confi guration of sound sources and listeners. Hence, a system is created that enables sound sources as well as listeners to be defi ned as moving entities. Furthermore, the ability exists for listeners, in their own movements and interactions, to generate sounds as well. In the system, proposed in this paper, ray-tracing is used to simulate the spatial acoustics. The paper discusses the considerations regarding several implementation choices and regarding adoption of the tool in the architectural design process.
keywords	Auditory perception; Architectural design; Acoustics; Simulation; Auralisation
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2012_001
id	ascaad2012_001
authors	Mahdjoubi, Lamine
year	2012
title	Digital Architecture at Crossroads – Transition from Simulation and Visualisation to Information Modelling
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 5
summary	Digital architecture is at an exciting but challenging stage of its development. Past decades have witnessed important developments in computer-generated architectural representations. These tools have complemented and, in some cases, superseded the traditional forms of design and communication. In parallel with progress in computer graphics, advances in computer generated architectural representations have evolved to deliver photorealistic computer generated imagery. However, there is evidence to suggest that these advances have not significantly enhanced collaborative practices. It was acknowledged that to address the fragmentation of the industry, a fundamental change to deliver digital architecture was needed. Dealing with the requirements for an improved co-ordination and co-operation between designers and other stakeholders to encourage more integration has therefore become a central issue in the last decade. It was also recognised that significantly more intelligence needs to be brought to bear on the decision-making process if the targets set by the sustainability agenda are to be met. The quest for an improved quality of information and decision making has shifted the emphasis from computer-generated imagery to integrated building information. The recent emergence of building information modelling (BIM) constitutes one of the most exciting developments in the field. It was suggested that BIM will deliver considerable sophistication and judgment in decision-making. This keynote speech seeks to examine the implications of the transition of digital architecture from simulation and visualisation to information modelling. It aims to shed light on the methodological and technological challenges facing practitioners, researchers, and software developers, as a result of the early adoption of BIM.
series	ASCAAD
type	keynote paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_001.pdf
last changed	2012/05/15 20:46

_id	acadia12_177
id	acadia12_177
authors	Mankouche, Steven ; Bard, Joshua ; Schulte, Matthew
year	2012
title	Morphfaux: Probing the Proto-Synthetic Nature of Plaster Through Robotic Tooling
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 177-186
doi	https://doi.org/10.52842/conf.acadia.2012.177
summary	Morphfaux is an applied research project that revisits the virtually lost craft of plaster to explore its potential for producing thickened architectural environments through the use of contemporary digital technology. The research challenges the flatness of modern, standardized dry wall construction and explores plaster’s malleability as a material that can be applied thick and thin, finished to appear smooth or textured, and tooled while liquid or cured. If the invention of industrialized modern building products such as drywall led to the demise of the plasterer as a tradesperson, our research seeks alliances between the abilities of the human hand and those of automation. By transforming historic methods using new robotic tools, Morphfaux has broadened the possibilities of architectural plaster. While our research has produced forms not possible by human skill alone, it also clearly illustrates a symbiotic relationship between the human body and robotic machines where human dexterity and robotic precision are choreographed in the production of innovative plastering techniques.
keywords	Digital Practice , Robotic Fabrication , Digital Craft , Tacit Knowledge , Material Resistance , Synthetic Material , Plaster , Variable Tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	acadia12_187
id	acadia12_187
authors	Mei-Ling, Lin ; Han, Ling ; Kothapuram, Shankara ; Jiawei, Song
year	2012
title	Digital Vernacular
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 187-195
doi	https://doi.org/10.52842/conf.acadia.2012.187
summary	Digital Vernacular investigates the potential of the process of depositing a paste like material with precision using a CNC device which has produced an innovative system for design and fabrication of environmentally responsive housing. Architectural practice has been greatly impacted by technical innovations in the past, usually new building types emerge as part of new ideologies. Yet the current revolution in computer-aided design and fabrication has architecture focusing on form – without questioning what these new processes can bring for the masses. The research project 'Digital Vernacular' has investigated the potential of using CNC technology for the production of housing. It has focused on the design of the machinic devices as well as computational design tools, and revolves around the concept of fabrication on site. Using an additive and layered manufacturing process and locally available material, the project proposes a revolutionary new digital design and fabrication system that is based on one of the oldest and most sustainable construction methods in the world. The main potentials of this method are not to create complex forms for the sake of design, but to use parametric control to adapt each design to the specificities of its site. Using geometrical rules found during many research experiments with real material behaviour, a new architectural language is created that merges several environmental functionalities into a single integrated design.
keywords	Digital , Vernacular , CNC , CAM , Housing , fabrication , environmental
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ijac201210301
id	ijac201210301
authors	Pan, Cheng-An; Taysheng Jeng
year	2012
title	Cellular Robotic Architecture
source	International Journal of Architectural Computing vol. 10 - no. 3, 319-339
summary	An emerging need for interactive architecture is currently making buildings mutable, flexible in use, and adaptable to changes in climate by introducing robotic systems. However, the feasibility of the seamless integration of building construction details and kinetic robotics has become a critical issue for developing robotic architecture. The objective of this work is to develop a robotic architecture with an emphasis on the integration of cellular robotics with a distributed kinetic building surface. The kinetic building surface integrates an actuating system, a localization and remote control system, which become part of the kinetic building system. This paper presents a systematic framework by reviewing theories and related work of robotic architecture and automated control. An architectural design scheme is proposed to simulate a scenario of application in a physical space. The functionality of the electrical and control system and the integration of the effects of actual construction were examined by a prototype of a kinetic surface. Our prototype presents a feasible construction method, and a prominent energy-saving effect. The potential strength and restrictions of the cellular robotic approach to architectural applications are discussed. The applicability of the prototype system and issues about controlling the behavior of spatial robots are demonstrated in this paper.
series	journal
last changed	2019/05/24 09:55

For more results click below: