Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_153
id	sigradi2012_153
authors	Kaufmann, Stefan; Petzold, Frank
year	2012
title	Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245
summary	In the time since European architects first began using computers in the building design process, the digital revolution has transformed how architects use planning tools completely. Today, digital tools are an indispensable part of planning practice. Besides a wide variety of digital modeling tools, parametric tools offer architects diverse options for generating cybernetic building models as BIM-models or homeostatic parametric geometry models. Cybernetic models help us to describe the buildings as a system and can improve planning efficiency. The aim of planning is to construct or fabricate an end result. The integration of digital fabrication methods in the digital chain is a fundamental goal if architects are to benefit from the progressive development of computer controlled machine tools. Fabrication integrated digital models can automate the planning process up to the production stage and enable the efficient fabrication of building components. The increased efficiency of planning and fabrication has facilitated a growing proliferation of buildings of increasing geometric complexity. Computers can open a door to the realization of new forms, spaces and construction systems to architects that understand the principles of fabrication-integrated cybernetic modeling.
keywords	didactic; parametric design; digital fabrication; CIM;
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia12_177
id	acadia12_177
authors	Mankouche, Steven ; Bard, Joshua ; Schulte, Matthew
year	2012
title	Morphfaux: Probing the Proto-Synthetic Nature of Plaster Through Robotic Tooling
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 177-186
doi	https://doi.org/10.52842/conf.acadia.2012.177
summary	Morphfaux is an applied research project that revisits the virtually lost craft of plaster to explore its potential for producing thickened architectural environments through the use of contemporary digital technology. The research challenges the flatness of modern, standardized dry wall construction and explores plaster’s malleability as a material that can be applied thick and thin, finished to appear smooth or textured, and tooled while liquid or cured. If the invention of industrialized modern building products such as drywall led to the demise of the plasterer as a tradesperson, our research seeks alliances between the abilities of the human hand and those of automation. By transforming historic methods using new robotic tools, Morphfaux has broadened the possibilities of architectural plaster. While our research has produced forms not possible by human skill alone, it also clearly illustrates a symbiotic relationship between the human body and robotic machines where human dexterity and robotic precision are choreographed in the production of innovative plastering techniques.
keywords	Digital Practice , Robotic Fabrication , Digital Craft , Tacit Knowledge , Material Resistance , Synthetic Material , Plaster , Variable Tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2012_85
id	ecaade2012_85
authors	Meyboom, AnnaLisa
year	2012
title	Tuning Heavy Design: Parametric Structural Form Generation
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 567-572
doi	https://doi.org/10.52842/conf.ecaade.2012.2.567
wos	WOS:000330320600060
summary	This paper discusses a methodology for generating architectural form parametrically from structural logics such that an architectural vocabulary can be generated for use in design. It intends to further the discussion of how parametrics can play a role in architectural design. Parametric applications are facilitating the use of engineering design feedback into the architectural process, allowing architects to ‘tune’ their designs. In this case, structural form is discussed. The nature of parametrics makes the use of structural principles relatively simple because they are already in the numeric form of equations. As well, parametrics make the generation of alternatives easy because of the iterative nature of the tool. As such, including the basis of structural principles in the logic of the parametrics allows the design to function performatively in both an architectural and a structural sense.
keywords	Parametric; form finding; structural analysis; algorithmic
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_262
id	ecaade2012_262
authors	Pasternak, Agata
year	2012
title	Robotic Prototypes Optimization: Incorporation of Optimization Procedures in the Design Process
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 265-272
doi	https://doi.org/10.52842/conf.ecaade.2012.2.265
wos	WOS:000330320600026
summary	The use of computer-aided design combined with robotics and evolutionary principles of optimization, during the architectural design process, is discussed in this paper. The research is based on the examples of four case studies out of six projects designed during the Experimental Design Studio: ROBO Studio and a parallel seminar on optimization techniques on Architecture for Society of Knowledge Master course at Warsaw University of Technology, Faculty of Architecture. The project’s main goal was to combine robotic prototypes construction with an optimization process executed in parallel within one design procedure. The results of the course and the discussion about the impact of both factors on the architectural design process are presented in this paper.
keywords	Genetic algorithm; optimization; robotics; Galapagos, Firefly, digital fabrication, design integration, kinetic structures
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:59

_id	ijac201210105
id	ijac201210105
authors	Phocas, Marios C.; Odysseas Kontovourkis, Maria Matheou
year	2012
title	Kinetic Hybrid Structure Development and Simulation
source	International Journal of Architectural Computing vol. 10 - no. 1, 67-86
summary	Supported through technological advances, the concept of kinetic architecture is internationally increasingly acknowledged in the past years in the development of adaptable buildings as to differing functional requirements, or external loading conditions. Most decisive factor is the structure in terms of materials and geometrical configurations, and the control system integrated within. Based on general principles of tensegrity structures, a hybrid system has been developed that consists of continuous hinge connected compression members, strengthened by an internal system of struts and continuous cable diagonals with closed loop. The kinetic mechanism is achieved through alteration of the cables length and the respective relative inclination of any adjacent compression members. In this way the transformability of the system arises primarily from the inherent integrative composition and dual capabilities of its members. Following the construction design of the prototype structure, the interactive development, as regards geometric properties and structural configurations, is presented analytically, as based on a parametric-associative design approach applied. Along this line, the specific syntax of structural development and simulation through parametric design is suggested to support in real terms the control design of the innovative structure in an integrated interactive context.
series	journal
last changed	2019/07/30 10:55

_id	ecaade2012_14
id	ecaade2012_14
authors	Ron, Ruth
year	2012
title	Exploration of Eco-Kinetic Systems in Architecture: Development of Dynamic Interactive Building Elements
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 391-399
doi	https://doi.org/10.52842/conf.ecaade.2012.2.391
wos	WOS:000330320600041
summary	This paper explores the potential of smart, moveable building components to achieve customized shading, variable privacy properties, and introduce complex visual qualities. The research combines performative design strategies and sustainable design principles, with parametric modelling and digital fabrication, within the contemporary theoretical and cultural context. The focus of this research is on architecture where physical movement is an integral part of the primary functional and formal nature of the building component. With embedded computing using input and output devices, the systems are no longer static but dynamically move and respond. The paper presents several case studies of working prototypes.
keywords	Kinetic architecture; dynamic architecture; interactive architecture
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_157
id	acadia12_157
authors	Schwinn, Tobias ; Krieg, Oliver David ; Menges, Achim ; Mihaylov, Boyan ; Reichert, Steffen
year	2012
title	Machinic Morphospaces: Biomimetic Design Strategies for the Computational Exploration of Robot Constraint Spaces for Wood Fabrication
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 157-168
doi	https://doi.org/10.52842/conf.acadia.2012.157
summary	The paper presents research into computational design processes that integrate not only criteria of physical producibility but also characteristics of design intelligence and performance. In the first part, the use of an industrial robot’s design space for developing differentiated finger joint connections for planar sheets of plywood is being introduced. Subsequently, biomimetics is proposed as a filter for the possible geometric differentiations with respect performative capacities. The second part focuses on the integration of fabricational and biomimetic principles with structural and architectural demands, as well as by the development of a custom digital data structure for the fabrication of finger joint plate structures resulting in the construction of a full scale prototype. The paper concludes with evaluating the tolerances inherent in construction through 3D laser scan validation of the physical model.
keywords	Computational Design , Robotic Manufacturing , Digital Fabrication , Biomimetics , 3D Scanning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2012_128
id	caadria2012_128
authors	Stojanovic, Djordje
year	2012
title	Prototypical architecture: Design research method with full-scale models
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 689–698
doi	https://doi.org/10.52842/conf.caadria.2012.689
summary	This paper will discuss the role of the prototype in the design process, in the context of adaptive principles and iterative procedures. The starting point of this study will be the analysis of several recent projects from THEVERYMANY™ and their concept of “prototypical architecture”. This paper aims to give an insight into both a different conception of architecture and the specific ways of research-oriented work which have redefined the role of the prototype in the design process. In the analysis presented here, the role of computer-aided architectural design is seen as fundamental in the development and further improvement of the iterative design process through faster and more affordable construction of prototypes.
keywords	Prototype; prototypical architecture; iterative design process; full-scale model
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2023_41
id	caadria2023_41
authors	Tedjosaputro, Mia
year	2023
title	Holographic Construction in Circular Design: A Literature Review
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 333–342
doi	https://doi.org/10.52842/conf.caadria.2023.1.333
summary	This study looks at a review of literature in regard to holographic construction within the period of 2012-2022, specifically analyses of its potential to aid circular design adaptation. The rationale behind this study is the lack of circularity context in holographic construction and augmented reality studies. The outcome of this literature review reveals aspects of holographic construction that lead to support for circular design opportunities. This paper provides a snapshot and is summarised with identified research gaps related to four key principles of circular buildings.
keywords	holographic construction, circular design, augmented reality, paperless architecture
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ijac201210305
id	ijac201210305
authors	Vermisso, Emmanouil
year	2012
title	The fabrication of fabrication: a second order design process
source	International Journal of Architectural Computing vol. 10 - no. 3, 401-422
summary	The project discussed here was developed during a research & design seminar on biologically inspired prototypingi. Based on the observation that nature produces infinite structural and formal configurations through re-cycling of only one material (fibers), a ‘machine’ was designed that can fabricate complex shapes using a variety of thread types. The paper theoretically situates a form-finding process with possible applications in construction and discusses the first phase of design as well as the early second stage and the factors that affect our decisions for future development. The author is concerned with the possible value of such a process for architecture, as well as a philosophical meaning of ‘layered’ design processes.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.1
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
wos	WOS:000330320600046
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	lasg_whitepapers_2019_367
id	lasg_whitepapers_2019_367
authors	Atelier Iris van Herpen
year	2019
title	Exploring New Forms of Craft
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.367 - 392
summary	Dutch fashion designer Iris van Herpen and Canadian architect Philip Beesley have been united by friendship and a mutual interest in esoteric, experimental craft since 2012. Together they collaborated on various dresses, techniques and materials, featured in six of Iris van Herpen's Couture collections. Since her first show in 2007, van Herpen has been preoccupied with inventing new forms and methods of sartorial expression by combining the most traditional and the most radical materials and garment construction methods into her unique aesthetic vision.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
doi	https://doi.org/10.52842/conf.caadria.2012.305
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_290
id	ecaade2012_290
authors	Barakat, Merate
year	2012
title	Urban Acoustic Simulation: Analysis of Urban Public Spaces through Auditory senses
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 587-592
doi	https://doi.org/10.52842/conf.ecaade.2012.1.587
wos	WOS:000330322400060
summary	This paper explores the sonic characteristics of urban spaces, with the application of apprehending acoustic space and form theory. The theory defines auditory spaces as acoustical arenas, which are spaces defi ned and delineated by sonic events. Historically, cities were built around a soundmark, for example, the resonance of a church bell or propagation of a calling for prayer, or a factory horn. Anyone living beyond the horizon of this soundmark was not considered citizens of that town. Furthermore, the volume of urban sonic arenas depends on natural. Digital simulation is necessary to visualize the ephemeral and temporal nature of sound, within a dynamic immersive environment like urban spaces. This paper digitally analyses the different morphologies of old cities and forms of growth in relation to the sound propagation and ecological effects. An experiment is conducted with the aid of an ancient North-African city model, exposed to a point cloud agent system. By analysing how the sound propagates from the known soundmark through the urban fabric, with the wind pressure interference; the paper compares the theoretical concept of soundmarks and the known perimeter of the ancient city
keywords	Urban Public Spaces; Aural Design; Auditory Arena Simulation; Soundmark
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

For more results click below: