Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_315
id	acadia12_315
authors	Imbern, Matias ; Raspall, Felix ; Su, Qi
year	2012
title	Tectonic Tessellations: A Digital Approach to Ceramic Structural Surfaces
doi	https://doi.org/10.52842/conf.acadia.2012.315
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 315-321
summary	From the beginning of digital revolution, structural surfaces drew significant attention as a realm that interweaves formal explorations, form-finding and structural optimization. However, after successful experimentation in the virtual domain, it became evident that some of the main challenges lay on how to translate these structural forms into architectural assemblies at the scale of buildings. The development of digital fabrication is crucial in this task, as means to overcome traditional constraints such as need for modular pieces, scaffolding and optimal assembly sequences.This research focuses on digital workflows that combine form finding with robotic fabrication, surface tessellation and panelization. In the past years, the use of digital tools to assemble identical modules into complex formations has achieved significant results for loadbearing walls. Expanding this line of research, the proposed fabrication system carries these experiments on additive fabrication into the production of structural surfaces. The assembly sequence involves a two-step fabrication: off-site panel manufacturing and on-site assembly. The main components of the system consist of two triangular ceramic pieces that provide structural resistance, refined surface finish, and formwork for thin reinforced-concrete layer. Panelization strategies reduce the requirements on-site work and formwork.The paper describes background research, concept, construction process, methodology, results and conclusions.
keywords	Digital Fabrication , Complex Geometry , Reinforced Ceramic , Structural Surfaces , Reduced Formwork
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	acadia12_295
id	acadia12_295
authors	Dierichs, Karola ; Menges, Achim
year	2012
title	Functionally Graded Aggregate Structures: Digital Additive Manufacturing With Designed Granulates
doi	https://doi.org/10.52842/conf.acadia.2012.295
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 295-304
summary	In recent years, loose granulates have come to be investigated as architectural systems in their own right. They are defined as large numbers of elements in loose contact, which continuously reconfigure into variant stable states. In nature they are observed in systems like sand or snow. In architecture, however, they were previously known only from rare vernacular examples and geoengineering projects, and are only now being researched for their innate material potentials. Their relevance for architecture lies in being entirely reconfigurable and in allowing for structures that are functionally graded on a macro level. Hence they are a very relevant yet unexplored field within architectural design. The research presented here is focused on the potential of working with designed granulates, which are aggregates where the individual particles are designed to accomplish a specific architectural effect. Combining these with the use of a computer-controlled emitter-head, the process of pouring these aggregate structures can function as an alternative form of 3D printing or digital additive manufacturing, which allows both for instant solidification, consequent reconfiguration, and graded material properties. In its first part, the paper introduces the field of research into aggregate architectures. In its second part, the focus is laid on designed aggregates, and an analytical design tool for the individual grains is discussed. The third part presents research conducted into the process of additive manufacturing with designed granulates. To conclude, further areas of investigation are outlined especially with regard to the development of the additive manufacturing of functionally graded architectural structures. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Aggregate Architectures , Digital Additive Manufacturing , Functionally Graded Materials
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2017_142
id	caadria2017_142
authors	Kaijima, Sawako, Tan, Ying Yi and Lee, Tat Lin
year	2017
title	Functionally Graded Architectural Detailing using Multi-Material Additive Manufacturing
doi	https://doi.org/10.52842/conf.caadria.2017.427
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 427-436
summary	The paper presents a future architectural detailing strategy enabled by the design of functionally graded materials (FGM). In specific, our proposal suggests the possibility of removing mechanical fasteners and adhesives from joint details. This is achieved by combining the principles of interlocking joineries found in traditional timber structures and current Multi-Material Additive Manufacturing (MMAM) technology to materialise FGMs. FGM belongs to a class of advanced materials characterised by variation in properties as the dimension varies by combining two or more materials at a microscopic scale (Mahamood et al. 2012). FGM is ubiquitous in nature and, when properly designed, can exhibit superior performance characteristics compared to objects comprised of homogeneous material properties. With the aim of developing interlocking details with improved performance, reliability, and design flexibility, we focus on controlling material stiffness, joint fitting, and geometry through the design of the microscopic material layout. A case study design will be presented to illustrate the process.
keywords	Functionality Graded Material; Multi-Material Additive Manufacturing ; Architectural Detailing; Interlocking Joints
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia12_187
id	acadia12_187
authors	Mei-Ling, Lin ; Han, Ling ; Kothapuram, Shankara ; Jiawei, Song
year	2012
title	Digital Vernacular
doi	https://doi.org/10.52842/conf.acadia.2012.187
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 187-195
summary	Digital Vernacular investigates the potential of the process of depositing a paste like material with precision using a CNC device which has produced an innovative system for design and fabrication of environmentally responsive housing. Architectural practice has been greatly impacted by technical innovations in the past, usually new building types emerge as part of new ideologies. Yet the current revolution in computer-aided design and fabrication has architecture focusing on form – without questioning what these new processes can bring for the masses. The research project 'Digital Vernacular' has investigated the potential of using CNC technology for the production of housing. It has focused on the design of the machinic devices as well as computational design tools, and revolves around the concept of fabrication on site. Using an additive and layered manufacturing process and locally available material, the project proposes a revolutionary new digital design and fabrication system that is based on one of the oldest and most sustainable construction methods in the world. The main potentials of this method are not to create complex forms for the sake of design, but to use parametric control to adapt each design to the specificities of its site. Using geometrical rules found during many research experiments with real material behaviour, a new architectural language is created that merges several environmental functionalities into a single integrated design.
keywords	Digital , Vernacular , CNC , CAM , Housing , fabrication , environmental
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ascaad2012_004
id	ascaad2012_004
authors	El-Masri, Souheil; Mazen Kana’an and Mohammed Fawzi Elanany
year	2012
title	Architecture, Digital Techniques & Project Management
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 14-20
summary	With the invention of computers, Architecture and other Engineering disciplines have undergone revolutionary developments offering new opportunities for improving efficiency and opening new frontiers for creativity. For example in architecture and urban planning, the discussions have been extended from conventional writings to cover cyberspace, virtual architecture and digital city. Moreover, computers have helped in the realization of many complex projects that would be inconceivable with traditional drawing techniques. This is clearly demonstrated in the works of Frank Gehry's, Zaha Hadid, Daniel Libeskind and many others. In deed, digital techniques have changed the design creative process and how the architects think. Traditionally the structured development architectural ideas from 2D drawings (plans, sections, elevations) towards 3D resolution has been replaced by more interactive approach of 2D & 3D. The changes that digital techniques have brought to the field of Architecture; including practice and education, can obviously be viewed from different angles and incite many discussions and questions. However, the purpose of this presentation is to discuss the role of digital techniques within the overall framework of project management in Gulf Housing Engineering. It starts the discussion with a brief on architecture and digital techniques in the Gulf Region, especially during the “boom period”; a period characterized by rapid production of buildings relying heavily on virtual images. It is against this background, the role of digital techniques is evaluated from a practice point of view. In fact in GHE, digital means are integral parts of the holistic project delivery process starting form initiation, to various design stages to construction ending with project completion. In this process emphasis is paid to the inter-relationships between IT Systems and Quality Control which in turn facilitate measuring, monitoring and reporting on various managerial, technical and design and budgetary aspects of the project. The presentation is supported by real case studies of GHE portfolio. It emphasizes that digital techniques should be an integral part of an overall process and should be seen as means to enhance efficiency and creativity; and should contribute to the betterment of the built environment
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_004.pdf
last changed	2012/05/15 20:46

_id	ecaade2023_259
id	ecaade2023_259
authors	Sonne-Frederiksen, Povl Filip, Larsen, Niels Martin and Buthke, Jan
year	2023
title	Point Cloud Segmentation for Building Reuse - Construction of digital twins in early phase building reuse projects
doi	https://doi.org/10.52842/conf.ecaade.2023.2.327
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 327–336
summary	Point cloud processing has come a long way in the past years. Advances in computer vision (CV) and machine learning (ML) have enabled its automated recognition and processing. However, few of those developments have made it through to the Architecture, Engineering and Construction (AEC) industry. Here, optimizing those workflows can reduce time spent on early-phase projects, which otherwise could be spent on developing innovative design solutions. Simplifying the processing of building point cloud scans makes it more accessible and therefore, usable for design, planning and decision-making. Furthermore, automated processing can also ensure that point clouds are processed consistently and accurately, reducing the potential for human error. This work is part of a larger effort to optimize early-phase design processes to promote the reuse of vacant buildings. It focuses on technical solutions to automate the reconstruction of point clouds into a digital twin as a simplified solid 3D element model. In this paper, various ML approaches, among others KPConv Thomas et al. (2019), ShapeConv Cao et al. (2021) and Mask-RCNN He et al. (2017), are compared in their ability to apply semantic as well as instance segmentation to point clouds. Further it relies on the S3DIS Armeni et al. (2017), NYU v2 Silberman et al. (2012) and Matterport Ramakrishnan et al. (2021) data sets for training. Here, the authors aim to establish a workflow that reduces the effort for users to process their point clouds and obtain object-based models. The findings of this research show that although pure point cloud-based ML models enable a greater degree of flexibility, they incur a high computational cost. We found, that using RGB-D images for classifications and segmentation simplifies the complexity of the ML model but leads to additional requirements for the data set. These can be mitigated in the initial process of capturing the building or by extracting the depth data from the point cloud.
keywords	Point Clouds, Machine Learning, Segmentation, Reuse, Digital Twins
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_73
id	sigradi2012_73
authors	Amen, Fernando García; Álvarez, Marcelo Payssé; Bonifacio, Paulo Pereyra; Meirelles, Lucía
year	2012
title	Fabricando mundos. Realidad, simulacro e inmanencia [Manufacturing worlds. Reality, simulacra and immanence]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 645-648
summary	Digital manufacturing in both as art and technology is a new way of designing, re-creation and re-invention of reality. This paper considers, from an epistemological point of view, the process of digital fabrication and its hyperlinks to known and simulated reality, and its ontological nature. Through documentation and methodological approach to the construction of a Moebius strip, this paper analyzes the nature and specifications of digital manufacturing. For this purpose, it makes a study of some strip properties and establishes a correlation within digital manufacturing, emphasizing similarities, complexities and shared qualities. Thus, it aims to create a reflection and a critical perspective on the complex logic of creation and simulation of knowable reality. And also it contributes to explore a theoretical corpus on the role of architects and designers in this incipient and ongoing discipline.
keywords	Fabricación digital, Realidad, Simulacro, Inmanencia
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_304
id	sigradi2012_304
authors	Chiarella, Mauro; Alvarado, Rodrigo Garcia
year	2012
title	Composiciones Plegadas. Propiedades espaciales y materiales (envolventes y componentes) [Folded Compositions. Spatial Properties and Materials (enclosures and components)]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 500-504
summary	The folded compositions in architecture enable creatively rethink the methods and instruments of ideation and manufacturing. Displace conventional architectural graphic (Descriptive Geometry and Perspective) of autonomy and historical determinism that has characterized (obsessive stylistic control of the design object and spatial structure inherited under the canons of classical geometry). The material expression of these settings provides an important link between: the formal conceptualization, the digital geometric operation, its manufacturing and responsive review, similar to the design process used. At the same time reveals limitations of scale, materiality and design limitations, which condition the models implemented.
keywords	Compositions Fold. Parametric Design. Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2012_405
id	sigradi2012_405
authors	de Oliveira Junior, Jair Antonio
year	2012
title	Biomimética e processo da Fabricação Digital: aplicações na produção da Arquitetura [Biomimetics and Digital Fabrication process: applications in the production of Architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 352-355
summary	Seeking to investigate, in a preliminary way, the possibilities of applied research in architectural language through parametric software and rapid prototyping. However, the search for logic and analog references to the creative process of architectural projects to emerge from such research solutions adopted by nature. A class of protozoa called radiolarian, class “Radiolaria (HAECKEL, 2005), presents radial skeletons that form hexagonal patterns, enabling large-scale conceptual application. Objective is to connect different systems, such that in the inter-relationship of specific propositions, resulting in a mediation between these systems, they are: the Biomimicry, Digital Manufacturing, Architecture.
keywords	Biomimicry, radiolarians, Digital Fabrication, Grasshopper, Architecture
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_139
id	acadia12_139
authors	Erioli, Alessio ; Zomparelli, Alessandro
year	2012
title	Emergent Reefs
doi	https://doi.org/10.52842/conf.acadia.2012.139
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 139-148
summary	The Emergent Reefs project thrives on the potential that emerge from a coherent utilization of the environment’s inherent ecological structure for its own transformation and evolution, using an approach based on digitally simulated ecosystems and sparkled by the possibilities and potential of large-scale 3D printing technology. Considering tourism as an inevitable vector of environmental change, the project aims to direct its potential and economic resources towards a positive transformation, providing a material substrate for the human-marine ecosystem integration with the realization of spaces for an underwater sculpture exhibition. Such structures will also provide a pattern of cavities which, expanding the gradient of microenvironmental conditions, break the existing homogeneity in favor of systemic heterogeneity, providing the spatial and material preconditions for the repopulation of marine biodiversity. Starting from a digital simulation of a synthetic local ecosystem, a generative technique based on multi-agent systems and continuous cellular automata (put into practice from the theoretical premises in Alan Turing’s paper “The Chemical basis of Morphogenesis” through reaction-diffusion simulation) is implemented in a voxel field at several scales giving the project a twofold quality: the implementation of reaction diffusion generative strategy within a non-isotropic 3-dimensional field and integration with the large-scale 3D printing fabrication system patented by D-Shape®. Out of these assumptions and in the intent of exploiting the expressive and tectonic potential of such technology, the project has been tackled exploring voxel-based generative strategies. Working with a discrete lattice eases the simulation of complex systems and processes across multiple scales (including non-linear simulations such as Computational Fluid-Dynamics) starting from local interactions using, for instance, algorithms based on cellular automata, which then can be translated directly to the physical production system. The purpose of Emergent-Reefs is to establish, through strategies based on computational design tools and machine-based fabrication, seamless relationships between three different aspects of the architectural process: generation, simulation and construction, which in the case of the used technology can be specified as guided growth.
keywords	emergence , reef , underwater , 3D printing , ecology , ecosystem , CFD , agency , architecture , tourism , culture , Open Source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2012_103
id	sigradi2012_103
authors	Folle, Daiane; Bruscato, Underléa Miotto; Pupo, Regiane Trevisan
year	2012
title	Equipamentos Urbanos de Interesse Social: Racionalizando o Processo de Projeto [Social interest urban equipment: Optimizing the design process]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 527-529
summary	This paper shows an experience where digital technologies are used in architecture and product design processes aiming collaboration, manufacturing and construction of urban equipments for a group of 210 households. The project is covered by a Federal Government Program called “My home My Life – Entities” which provides the community resources through a Neighborhood Association that will manage the projects. This article proposes a link that points out to the concept of Triple Helix, which involves the participation of a private enterprise and university in the process of promoting social-economic development. The project included a group of architects working with digital fabrication, design, design process and validation of an urban equipment that will be proposed to be inserted in this new community.
keywords	Equipamento Urbano; Metodologia de Projeto; Prototipagem Rápida; Racionalização.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2012_247
id	sigradi2012_247
authors	Gomes, Lucas Ariel; Barbosa, Wilson; Araújo, André Luís; Celani, Gabriela
year	2012
title	Exercício Projetual de uma Estrutura de Cobertura com a Utilização do Diagrama de Voronoi no plug-in Grasshopper [Design experiment with the use of Voronoi Diagrams in Grasshopper plug-in: a roof structure]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 636-640
summary	This paper describes a design experiment with the use of Voronoi Diagrams, a systematic division of the metric space based on a set of points. Automated procedures were used in the process: a script that generated sets of random points and a plug in that automatically generated polygons based on these points. Computer models, scale models and full scale prototypes were produced in order to develop construction details and preview results. It was possible to conclude that the use of a generative method along with automated procedures is far from restricting creativity, allowing the quick exploration of multiple design alternatives.
keywords	Roof structure; Voronoi Diagram; Grasshopper
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia12_169
id	acadia12_169
authors	Helm, Volker ; Ercan, Selen ; Gramazio, Fabio ; Kohler, Matthias
year	2012
title	In-Situ Robotic Construction: Extending the Digital Fabrication Chain in Architecture
doi	https://doi.org/10.52842/conf.acadia.2012.169
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 169-176
summary	In this paper, viable applications of mobile robotic units on construction sites are explored. While expanding on potential objectives for in-situ fabrication in the construction sector, the intention is also to build upon innovative man-machine interaction paradigms to deal with the imprecision and tolerances often faced on construction sites. By combining the precision of the machine with the cognitive environmental human skills, a simple but effective mobile fabrication system is experimented for the building of algorithmically designed additive assemblies that would not be possible through conventional manual methods if the large amount of individual building blocks and the size of the structure to be built are taken into account. It is believed that this new approach to man-machine collaboration, aimed at a deeper integration of human ability with the strengths of digitally controlled machines, will result in advances in the construction sector, thus opening up new design and application fields for architects and planners.
keywords	in-situ robotic fabrication , mobile robotics , 1:1 scale fabrication , additive assembly , algorithmically designed structures , man-machine interaction , cognitive , object recognition , construction site
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ijac201210201
id	ijac201210201
authors	Jabi, Wassim
year	2012
title	Augmenting Architecture Through Desktop Manufacturing
source	International Journal of Architectural Computing vol. 10 - no. 2, 163-184
summary	Personal desktop manufacturing, with its roots in hacker culture, is on the cusp of exploding into the main stream due to the advent of affordable personal 3D printers.This paper is an exploration of these advances in desktop manufacturing technology and their impact on our relationship with products and the built environment.The paper draws parallels to the personal computing and desktop publishing revolutions that offer clues to the future of personal desktop manufacturing. Four major themes have emerged from this exploration: Personal empowerment, remote printing and collaboration, full-scale digital construction, and, most intriguingly, architectural prosthetics. Based on an open-source philosophy and creative commons licensing, desktop manufacturing is redefining our relationship with large manufacturers and is beginning to convert us back from a consumerist culture into a creator one.
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
doi	https://doi.org/10.52842/conf.caadria.2012.337
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia12_287
id	acadia12_287
authors	McGee, Wes ; Newell, Catie ; Willette, Aaron
year	2012
title	Glass Cast: A Reconfigurable Tooling System for Free-Form Glass Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2012.287
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 287-294
summary	Despite glass’s ubiquity in the modern built environment it is rarely applied in applications requiring complex curvature. The high temperatures and complexity of techniques utilized in forming curved glass panels are typically very expensive to employ, requiring dedicated hard-tooling which ultimately limits the formal variation that can be achieved. This combination of economic and manufacturing barriers limits both the formal possibilities and potentially the overall envelope-performance characteristics of the glazing system. This research investigates a methodology for utilizing reconfigurable tooling to form glass into doubly curved geometries, offering the potential for improved structural and environmental performance in a material that has remained largely unchanged since the advent of its industrial manufacturing. A custom built forming kiln has been developed and tested, integrated through a parametric modeling workflow to provide manufacturing constraint feedback directly into the design process. The research also investigates the post-form trimming of glass utilizing robotic abrasive waterjet cutting, allowing for the output of machine control data directly from the digital model. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Digital Fabrication , Robotic Fabrication , Computational Design , Material Computation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_82
id	ecaade2012_82
authors	Mohammad, Kareem El Sayed; Hanafi, Mohammad Assem; Nasr, Mohammad
year	2012
title	A Closer Perspective on Fabrication Realities
doi	https://doi.org/10.52842/conf.ecaade.2012.2.169
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 169-179
summary	Digital Fabrication has arguably stirred the return of the architect to the long-held position as a master builder. The close engagement with materials offered by the digital fabrication technologies places necessary limitations and calls the architects for a deeper understanding of and awareness about the fabrication realities during the design process. The research conducted uses parametric modeling for the alteration of the design according to a wide range of infl uences, one of which is fabrication. This paper offers a close perspective on some fabrication necessities and limitations that emerged through the manufacturing of a number of scaled models of a parametrically designed shed and a full scale pavilion. The scope of this work falls into the realm of physical testing, tolerance, structure and assembly. It also points out the fabrication parameters that were part of the digital setting used to create the physical models. The paper argues that craft is still practically alive when deploying digital technologies as it has been ever present in the pre-digital era.
wos	WOS:000330320600017
keywords	Digital fabrication; tolerances; parametric design; assembly; Laser cutting
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_102
id	ecaade2012_102
authors	Pavlícek, Jiri; Kaftan, Martin
year	2012
title	Parametric Design System for Passive Houses
doi	https://doi.org/10.52842/conf.ecaade.2012.2.487
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 487-494
summary	The intention of this research is to develop a design system for geometrically complex passive houses. Research focuses especially on the link-up of the CAAD (Computer-aided architectural design) and the CAM process (Computer-aided manufacturing) and deals only with timber structures. The aim of the project is to develop a system that would automate a creation of the computer model of the geometrically complex timber structures and link it to fabrication process. It should be possible to use the system for houses of the size of a family house up to an apartment house. The advantages of the system ought to be the fabrication preciseness, economical availability, high speed of construction, eco-friendliness and above all absence of geometrical constraints.
wos	WOS:000330320600051
keywords	Parametric; passive house; timber; CLT; geometry
series	eCAADe
email
last changed	2022/06/07 07:59

For more results click below: