Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_304
id	sigradi2012_304
authors	Chiarella, Mauro; Alvarado, Rodrigo Garcia
year	2012
title	Composiciones Plegadas. Propiedades espaciales y materiales (envolventes y componentes) [Folded Compositions. Spatial Properties and Materials (enclosures and components)]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 500-504
summary	The folded compositions in architecture enable creatively rethink the methods and instruments of ideation and manufacturing. Displace conventional architectural graphic (Descriptive Geometry and Perspective) of autonomy and historical determinism that has characterized (obsessive stylistic control of the design object and spatial structure inherited under the canons of classical geometry). The material expression of these settings provides an important link between: the formal conceptualization, the digital geometric operation, its manufacturing and responsive review, similar to the design process used. At the same time reveals limitations of scale, materiality and design limitations, which condition the models implemented.
keywords	Compositions Fold. Parametric Design. Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia12_269
id	acadia12_269
authors	Lally, Sean
year	2012
title	Architecture of an Active Context
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 269-276
doi	https://doi.org/10.52842/conf.acadia.2012.269
summary	As we stand with our feet on earth’s outermost surface we build an architecture today that is much like it was several thousand years earlier, in an attempt to extend that outer shell with one of our own making. Artificial masses are built from a refinement of this existing geologic layer into materials of stone, steel, concrete, and glass that assemble to produce new pockets of space through the buildings they create. However, the sixth century BC writer Thales of Miletus put a different perspective on this: he insisted that we live, in reality, not on the summit of a solid earth but at the bottom of an ocean of air (Holmyard 1931). And so, as architecture continues to build up the outermost layer of earth’s surface through a mimicking, embellishing, and enhancing of the materials which it comes from, it raises the question of why we have not brought a similar relationship to the materialities at the bottom of this “ocean” of air to create the spaces we call architecture. If you were looking to level a complaint with the architectural profession, stating that it has not been ambitious enough in scope would not be one. Architects have never shied away from the opportunity to design everything from the building’s shell to the teaspoon used to stir your sugar in its matching cup. But it would seem that the profession has developed a rather large blind spot in terms of what it sees as a malleable material with which to engage. Architects have made assumptions as to what is beyond our scope of action, refraining from engaging a range of material variables due to a belief that the task would be too great or simply beyond our physical control. So even though we are enveloped by them continuously, both on the exterior as well as the interior of our buildings, it must be assumed that the particles, waves, and frequencies of energy that move around us are thought by architects to be too faint and shaky to unload upon them any heavy obligations, that they are too unwieldy for us to control to create the physical boundaries of separation, security, and movement required of architecture. This has resulted in a cultivated set of blinders that essentially defines architecture as a set of mediation devices (surfaces, walls, and inert masses) for tempering the environmental context it is situated in from the individuals and activities within. The spaces we inhabit are defined by their ability to decide what gets in and what stays out (sunlight, precipitation, winds). We place our organizational demands and aesthetic opinions on the surfaces that mediate these variables rather than seeing them as available for manipulation as a building material on their own. The intention here is to recalibrate the materialities that make up that environmental context to build architecture. The starting point is a rather naive question: can we design the energy systems that course in and around us daily as an architectural material so as to take on the needs of activities, securities, and lifestyles associated with architecture? Can the variables that we would normally mediate against instead be heightened and amplified so as to become the architecture itself? That which many would incorrectly dismiss as simply “air” today—thought to be homogeneous, scale-less, and vacant due in part to the limits of our human sensory system to perceive more fully otherwise—might tomorrow be further articulated, populated, and layered so as to become a materiality that will build spatial boundaries, define activities of individuals and movement, and act as architectural space. Our environmental context consists of a diverse range of materials (particles and waves of energy, spectrum of light, sound waves, and chemical particles) that can be manipulated and formed to meet our needs. The opportunity before us today is to embrace the needs of organizational structures and aesthetics by designing the active context that surrounds us through the material energies that define it.
keywords	Material energies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2012_279
id	ecaade2012_279
authors	Marcos, Carlos L.
year	2012
title	Beyond Phenomenal or Literal Transparency: Physical Digitality
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 551-560
doi	https://doi.org/10.52842/conf.ecaade.2012.2.551
wos	WOS:000330320600058
summary	The interesting distinction established by Collin Rowe and Robert Slutzky regarding the concept of transparency in modern architecture can be further enriched in relation to digital architecture and the new ways in which architects may address the design of material limits. The polarity between materiality and virtuality, between being and appearance is challenged with the concept of eversion and could lead to what we have referred to as virtual transparency. The intricate performative latticed skins designed and fabricated thanks to C.A.D./C.A.M. techniques have produced different states of transparent visual effects that either conceal or partially suggest silhouettes producing latticed transparencies. Finally, the development of next generation liquid crystal displays may introduce highly responsive transparent membranes in architecture allowing a one step further virtual transparency that could be described as translucent transparency.
keywords	Phenomenal transparency; eversion; virtual transparency; latticed transparency; translucent transparency
series	eCAADe
last changed	2022/06/07 07:59

_id	acadia12_21
id	acadia12_21
authors	Menges, Achim
year	2012
title	Material Generation: Materiality and Materialisation as Active Drivers in Design Computation
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 21-24
doi	https://doi.org/10.52842/conf.acadia.2012.021
series	ACADIA
type	keynote paper
last changed	2022/06/07 07:58

_id	ecaade2012_230
id	ecaade2012_230
authors	Tsiliakos, Marios
year	2012
title	Swarm Materiality: A multi-agent approach to stress driven material organization
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 301-309
doi	https://doi.org/10.52842/conf.ecaade.2012.1.301
wos	WOS:000330322400030
summary	This paper sets out to introduce and explore a computational tool, thus a methodological framework, for simulating stress driven material growth and organization by employing a multi-agent system based in swarm intelligence algorithms. It consists of an ongoing investigation that underlies the intention for the material system to be perceived as design itself. The algorithm, developed in the programming language Processing, is operating in a bottom-up manner where components and data fl ows are self-organized into design outputs. An evaluation process, via testing on different design cases, is providing a coherent understanding on the system’s capacity to address an acceptable, within the “state-of-the-art” context, solution to material optimization and innovative form-finding. The analysis of the exported data is followed by a possible reconfi guration of the algorithm’s structure and further development by introducing new elements.
keywords	Swarm-intelligence; stress; material-organization; biomimetics; processing
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2012_237
id	ecaade2012_237
authors	Zarzycki, Andrzej
year	2012
title	Component-based Design Approach Using BIM
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 67-76
doi	https://doi.org/10.52842/conf.ecaade.2012.1.067
wos	WOS:000330322400006
summary	The promising directions in current design practice and teaching relate to creativity with digital tools in the context of building information modelling (BIM), performance analysis, and simulations as well as digital materiality (computational simulations of materials) and dynamics-based behaviour. This line of research combines spatial design with building and material technology in search of effective and effi cient architecture. It reconstitutes questions of what to design by interrelating them with questions of how and why to design. This paper focuses on the appropriation of BIM tools for architectural curriculum teaching, from the design studio to building technology courses. It specifically focuses on BIM-based parametric modeling in discussing construction details, assemblies, and design explorations in the design studio context.
keywords	BIM; building information modeling; parametric construction details; construction assemblies
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.1
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2012_186
id	sigradi2012_186
authors	Aghaei Meibodi, Mania; Aghaiemeybodi, Hamia
year	2012
title	Symbiosis of Structural & Non-Structural properties in Building
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 602-606
summary	This paper highlights the different interplays between structural and non-structural parts in building artifact as the result of modes of building processes and massing. The massing is understood as processes of assembling material into a body through which we identify with the building physically. In the last decade architecture discipline as the result of technological inventions has faced shifts in the design processes, massing processes and topology of the artefact. In which we witness integral coexistence between the structural and non-structural elements of building. In this paper the seeds of this integral interplay is scrutinised through the study of design and massing processes of a multi-functional pavilion prototype as a case study.
keywords	digital surface; prototype; design processes; structural; formation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
wos	WOS:000330320600046
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_282
id	ecaade2012_282
authors	Andrade, Max ; Mendes, Leticia ; Godoi, Giovana ; Celani, Gabriela
year	2012
title	Shape grammars for analyzing social housing: The case of Jardim São Francisco low-income housing development
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 451-458
doi	https://doi.org/10.52842/conf.ecaade.2012.1.451
wos	WOS:000330322400046
summary	This paper presents an analysis of Jardim São Francisco, a lowincome housing development in São Paulo, Brazil, using shape grammar as an analytical method. It is part of an ongoing research that aims at analyzing the different types of sitting in low-income housing developments and their consequences for public spaces. The fi nal objective is to propose a design method that allows designing better quality urban spaces in this type of development.
keywords	Low-income housing; urban design; shape grammar
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
wos	WOS:000330322400002
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
wos	WOS:000330320600044
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
wos	WOS:000330320600047
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_439
id	acadia12_439
authors	As, Imdat ; Angelico, Maria
year	2012
title	Crowdsourcing Architecture: A Disruptive Model in Architectural Practice
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 439-443
doi	https://doi.org/10.52842/conf.acadia.2012.439
summary	This paper discusses the use of crowdsourcing as a new approach for architectural design acquisition. We will give an overview of the concept of crowdsourcing, and elaborate on its particular application in architecture via concrete projects executed on Arcbazar, a firstof- its-kind crowdsourcing platform for architectural design services. We argue that online crowdsourcing platforms can have an immense impact on smaller-scale design challenges, e.g., home remodeling projects and landscape and interior design challenges, and can potentially carry these often neglected projects into the architectural design sphere. In this paper we will discuss the methods and techniques of architectural crowdsourcing and illustrate the processes and outcomes through a series of projects: a remodeling project for a closet; an interior design challenge for a dining space; and a layout problem for an apartment complex. We will then evaluate the protocol and outcome of architectural crowdsourcing, and convey the professional and popular media response to this new method of architectural design acquisition.
keywords	crowdsourcing , competitions , networking , interaction , collaboration
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

For more results click below: