Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_97
id	acadia12_97
authors	Lilley, Brian ; Hudson, Roland ; Plucknett, Kevin ; Macdonald, Rory ; Cheng, Nancy Yen-Wen ; Nielsen, Stig Anton ; Nouska, Olympia ; Grinbergs, Monika ; Andematten, Stephen ; Baumgardner, Kyle ; Blackman, Clayton ; Kennedy, Matthew ; Chatinthu, Monthira ; Tianchen, Dai ; Sheng-Fu, Chen
year	2012
title	Ceramic Perspiration: Multi-Scalar Development of Ceramic Material
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 97-108
doi	https://doi.org/10.52842/conf.acadia.2012.097
summary	Ceramic building material is a useful passive modulator of the environment. The subject area is based on traditional cultural and material knowledge of clay properties: from amphora to rammed earth building; and ranges to present uses: from desiccants and space shuttle tile patterns to bio-ceramics. The primary consideration is to control material density and porosity in a tile component, in response to specific environmental conditions. This depends on a number of key physical principles: the ability of the material to absorb thermal energy, the ability to absorb and then ‘wick’ moisture within the pore structure, and the decrement factor or ‘time lag’ of the effect. The interplay between these properties point to the importance of directionality in the porous microstructure, at the boundary layer. Material characteristics have been investigated in the laboratory at a micron scale and in the ceramics workshop at full scale, with some interplay between the two. Recent work done on monitoring has led to the development of software tools that allow feedback (approaching real time)- a visual representation of the dynamic thermal and hygrometric properties involved.
keywords	Synthetic tectonics , composite materials , smart assemblies , emerging material processes , Responsive environments , sensing , real-time computation , feedback loops , Information Visualization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ijac201210301
id	ijac201210301
authors	Pan, Cheng-An; Taysheng Jeng
year	2012
title	Cellular Robotic Architecture
source	International Journal of Architectural Computing vol. 10 - no. 3, 319-339
summary	An emerging need for interactive architecture is currently making buildings mutable, flexible in use, and adaptable to changes in climate by introducing robotic systems. However, the feasibility of the seamless integration of building construction details and kinetic robotics has become a critical issue for developing robotic architecture. The objective of this work is to develop a robotic architecture with an emphasis on the integration of cellular robotics with a distributed kinetic building surface. The kinetic building surface integrates an actuating system, a localization and remote control system, which become part of the kinetic building system. This paper presents a systematic framework by reviewing theories and related work of robotic architecture and automated control. An architectural design scheme is proposed to simulate a scenario of application in a physical space. The functionality of the electrical and control system and the integration of the effects of actual construction were examined by a prototype of a kinetic surface. Our prototype presents a feasible construction method, and a prominent energy-saving effect. The potential strength and restrictions of the cellular robotic approach to architectural applications are discussed. The applicability of the prototype system and issues about controlling the behavior of spatial robots are demonstrated in this paper.
series	journal
last changed	2019/05/24 09:55

_id	acadia12_401
id	acadia12_401
authors	Mehann, Ryan ; Sher, Elite
year	2012
title	An Exploration Into Computational Optimization for Motive Architecture
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 401-405
doi	https://doi.org/10.52842/conf.acadia.2012.401
summary	This paper explores the potential of advanced computational methods for architecture. An experiment has been conducted with the aim of applying a computer driven optimization process on the motive behavior of a physical prototype. The choice of the mechanism is arbitrary, and this is to convey that the adaptive behavior of a structure in real time may be improved with the appropriate computational methods, regardless of its mechanical complexity. This provides architects with the opportunity to bring previously static architectural concepts into motion. The paper looks into the fields of embodied AI and mobile robotics research as resources for knowledge on the notions of integrating evolutionary computation into physical artifacts.
keywords	Computational Optimization , genetic Algorithms , Adaptive Architecture , Kinetic Architecture , Mobile Robotics
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_057
id	ecaade2012_057
authors	Bielik, Martin ; Schneider, Sven ; König, Reinhard
year	2012
title	Parametric Urban Patterns: Exploring and integrating graph-based spatial properties in parametric urban modelling
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-708.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.701
wos	WOS:000330322400074
summary	The article presents a graph-based spatial analysis toolset (“decoding spaces”components) which we have recently developed as an extension of the visual scripting language Grasshopper3D for Rhino. These tools directly integrate spatial analysis methods into CAD design software which can have a signifi cant effect on current design workfl ows. However,grasshopper doesn’t only enable the results of analyses to be used in the standard Rhino modelling environment. It also makes it possible to integrate spatial analysis into a parametric design approach as discussed in this paper. The functionality of this toolset is demonstrated using a simple urban design scenario where we introduce the idea of parametric patterns based on graph-measures.
keywords	Spatial analysis; parametric modelling; urban layout; design process; decoding spaces
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ascaad2012_020
id	ascaad2012_020
authors	Bouchahm, Yasmina; Fatiha Bourbia and Bouketta Samira
year	2012
title	Numerical Simulation of Effect of Urban Geometry Layouts on Wind and Natural Ventilation Under Mediterranean Climate
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 195-202
summary	The use of the method "simulation" of the microclimate for an urban site presents much of interest; because this can serve as us observation and analysis of the consequences of various scenarios relating to the existence and the importance of the constituent elements in urban space. Wind in outdoor urban space is among the most difficult parameters to identify and control field given its instability. Currently, in the field of the ventilation, there are some outdoor spaces simulation tools, used to assess the flow of the wind at different spatial scales. The aim of this research is to demonstrate the effect of the urban geometry of the layout on the wind movement and the outdoor natural ventilation. However, this study investigated the effect on outdoor thermal comfort of a building layouts in a planned residential area situated in the city of Jijel humid Mediterranean region of Algeria. In order to improve outside comfort in this open space, a 3D numerical simulation tool ENVI-met 3.1 beta 4 was used to simulate the urban thermal climate taking into account various scenarios. Thus, simulation’s results are discussed in this paper
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_020.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_016
id	ascaad2012_016
authors	Bourbia, Fatiha ; Yasmina Bouchahm and Ouarda Mansouri
year	2012
title	The Influence of Albedo on the Urban Microclimatic Street Canyon
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 159-169
summary	In city, when temperatures run higher than those in suburban and rural areas, this generate a phenomenon called Urban Heat Island (UHI), this effect occurs, primarily because growing numbers of buildings have supplanted vegetation and trees. The main causes of the different microclimatic conditions in cities are linked among other parameters to urban geometry which influences incoming and outgoing radiations as well as surface material properties, such as color and texture. In hot climates the elevated surface temperatures of materials directly affect, not only the urban microclimate, but also thermal comfort conditions in urban open spaces. In order to evaluate the microclimate variation of urban street canyon compared to the variation of walls and ground surfaces materials, series of field simulation are used by software tool , Envi-met v3.0, in down town of Constantine, Algeria.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_016.pdf
last changed	2012/05/15 20:46

_id	c4bd
id	c4bd
authors	Derix C, Gamlesæter A, Miranda P, Helme L and Kropf K
year	2012
title	Simulation Heuristics for Urban Design
source	In Mueller Arisona et al (eds), Digital Urban Modelling and Simulation: Communications in Computer and Information Science, Springer, Heidelberg, 2012
summary	Designing simulations for urban design not only requires explicit performance criteria of planning standards but a synthesis of implicit design objectives, that we will call ‘purpose rules’, with computational approaches. The former would at most lead to automation of the existing planning processes for speed and evaluation, the latter to an understanding of perceived urban qualities and their effect on the planning of cities. In order to transform purpose rules into encoded principles we argue that the focus should not be on defining parametric constraints and quantities, but on aligning the perceptual properties of the simulations with the strategies of the stakeholders (planner/ urban designer/ architect/ developer/ community). Using projects from the Computational Design and Research group at Aedas [CDR] as examples, this chapter will discuss how an open framework of lightweight applications with simple functionality can be integrated into the design and planning process by using computational simulations as urban design heuristics.
keywords	urban design, design heuristics, meta-heuristics, simulation, algorithm visualization
series	book
type	normal paper
email
more	http://www.springerlink.com/content/g58114676q4228h8/?MUD=MP
last changed	2012/09/20 14:17

_id	acadia12_295
id	acadia12_295
authors	Dierichs, Karola ; Menges, Achim
year	2012
title	Functionally Graded Aggregate Structures: Digital Additive Manufacturing With Designed Granulates
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 295-304
doi	https://doi.org/10.52842/conf.acadia.2012.295
summary	In recent years, loose granulates have come to be investigated as architectural systems in their own right. They are defined as large numbers of elements in loose contact, which continuously reconfigure into variant stable states. In nature they are observed in systems like sand or snow. In architecture, however, they were previously known only from rare vernacular examples and geoengineering projects, and are only now being researched for their innate material potentials. Their relevance for architecture lies in being entirely reconfigurable and in allowing for structures that are functionally graded on a macro level. Hence they are a very relevant yet unexplored field within architectural design. The research presented here is focused on the potential of working with designed granulates, which are aggregates where the individual particles are designed to accomplish a specific architectural effect. Combining these with the use of a computer-controlled emitter-head, the process of pouring these aggregate structures can function as an alternative form of 3D printing or digital additive manufacturing, which allows both for instant solidification, consequent reconfiguration, and graded material properties. In its first part, the paper introduces the field of research into aggregate architectures. In its second part, the focus is laid on designed aggregates, and an analytical design tool for the individual grains is discussed. The third part presents research conducted into the process of additive manufacturing with designed granulates. To conclude, further areas of investigation are outlined especially with regard to the development of the additive manufacturing of functionally graded architectural structures. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Aggregate Architectures , Digital Additive Manufacturing , Functionally Graded Materials
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_109
id	caadria2012_109
authors	Gerber, David; Mohamed M. ElSheikh and Aslihan Senel Solmaz
year	2012
title	Associative parametric design and financial optimisation - 'Cash Back 1.0': Parametric design for visualising and optimising Return on Investment for early stage design decision-making
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 47–56
doi	https://doi.org/10.52842/conf.caadria.2012.047
summary	Cash-Back 1.0 presents research on the development of methodologies and technologies to simulate the cause and effect of early stage geometric design alternatives of buildings and the real time results upon financial pro-forma. Through the encoding of design rules and their associative relationships to financial pro-forma the research illustrates enhanced visualization of early stage building design decisions and their cumulative impact on financial goals and constraints. The research presents value an associative parametric design process affords often-disparate domains through correlation and visualization. The paper describes incorporation of a feedback loop between pro-forma and geometric models in conjunction with an optimization method. Given the level of uncertainty in early stage design decision making the research contributes partial solutions to the domain problems of design decision uncertainty and design cycle latency and is further argumentation for increased use of parametric design methods and automation to support design domain integration.
keywords	Parametric design; genetic algorithm; design decision support; multi domain optimisation; domain integration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2012_002
id	ascaad2012_002
authors	Maher, Mary Lou
year	2012
title	Designing CAAD for Creativity
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 7-9
summary	Can we design CAAD to enhance creativity? CAAD is often considered a tool that assists architects in design by managing documentation and facilitating visualization. While there has been anecdotal concern that CAAD inhibits creativity, there is empirical evidence that CAAD can enhance creativity. The challenge is to develop principles for designing CAAD for creativity based on theoretical and empirical research on recognizing and enhancing individual and distributed creative cognition. This presentation describes three concepts that can lead to principles for designing CAAD to enhance human creativity: recognition, perception, and diversity. // 1. Recognition: A framework for recognizing and evaluating creative design, shown in Figure 1, is developed based on research in psychology and design science that includes novelty, value, and surprise. This framework provides a basis for comparing and evaluating the impact of CAAD on creativity. 2. Perception: Perception affects cognition and therefore interaction design is a critical component of designing CAAD for creativity. The results of an empirical study, shown in Figure 2, using a protocol analysis find that changing perception to include tangible user interfaces has a positive effect on creative cognition. These results lead to design principles for increasing perceptual modalities in future CAAD systems. 3. Diversity: A theoretical framework for social and collective intelligence in design show how an increase in cognitive diversity leads to an increase in innovation. Using this framework we can develop design processes that combine the benefits of individual, team, and crowdsourced design ideas, as shown in Figure 3.
series	ASCAAD
type	keynote paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_002.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_124
id	ecaade2012_124
authors	Wierzbicki-Neagu, Madalina ; Silva, Clarence Wilfred de
year	2012
title	Application of Fuzzy Logic for Optimizing Foldable Freeform Geometries: An example of a practical application – a foldable window shade
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 709-717.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.709
wos	WOS:000330322400075
summary	This paper concerns the current discourse on computer-aided design tools for architectural design. There are drawbacks of purely analytic design tools which hinder a system-level, end-effect oriented ideation. For instance, most freeform quadrilateral meshes are fully constrained and therefore not capable of folding. They can only fold under special circumstances – when their geometry satisfi es the conditions of over-constrained kinematics. However, such intent of folding cannot be captured using simple modeling based on parameters and constraints. Furthermore, algorithmization of mesh kinematics using formulas is infl exible, it cannot handle topological variations, and it inhibits the interactive control of the model. In this paper, a fuzzy logic algorithm which uses a goal-oriented, human-like reasoning to control the parametric model is proposed. The algorithm applies easily observable behaviors of the geometry to adjust the selected patches until the entire shell can be folded. The algorithm relies on designer-observable characteristics of motion rather than on formulaic representations. Such approach directs the designers’ focus on the desired outcome while avoiding the drawbacks of analytic modeling of complex kinematics.
keywords	Folding structures; fuzzy logic; intent-driven design; freeform quadrilateral mesh
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2012_022
id	ascaad2012_022
authors	Borham, Ahmad; Lobna Sherif and Osama Tolba
year	2012
title	Resilient Rules - Culture and Computation in Traditional Built Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 211-221
summary	This study explores the influence of the socio-cultural rules, based upon Islamic jurisprudence (fiqh), on the complexity of the traditional built environment. This system of rules organized the societal activities, including decisions and activities related to design and construction in the Arab-Islamic city. Considering the city as a complex system, the study will try to show how this rules system made the Arab-Islamic city resilient and adaptive. Complex Adaptive Systems (CAS) are non-linear, self-organizing systems that have the ability to adapt to changing conditions through changing the rules that organize the random autonomous interactions between agents in the environment. This adaptation takes place through gradual gained experience that is reflected in the behavior of agents. This study attempts to interrelate different bodies of literature (Complexity/Chaos theory and built environment studies) in a single framework that aims to show that the socio-cultural rules system based on fiqh was a major factor in the resilience of the traditional built environment. These interrelations are illustrated using a graph called Computational Rules Graph (CRG). The CRG relates the traditional rules system to attributes of complex systems in a graph that can be modeled computationally. Traditional rules (codes of conduct) are proscriptive (non-deterministic), defining what is prohibited, thereby producing autonomous environments where agents had control over their immediate environment. In comparison, contemporary rules of the built environment (building codes) are prescriptive (deterministic), subscribing definite actions that need to take place by the stake-holder (agent) neglecting user needs and preferences. The application of these traditional rules system increased the agent’s autonomy and freedom of action. It also helped establish stronger social networks among agents, which resulted in a resilient environment.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_022.pdf
last changed	2012/05/15 20:46

_id	acadia12_109
id	acadia12_109
authors	Comodromos, Demetrios A ; Ellinger, Jefferson
year	2012
title	Material Intensities
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 109-113
doi	https://doi.org/10.52842/conf.acadia.2012.109
summary	As host organizers of the Smartgeometry 2012 Conference, professors of Architecture, and as principals in design firms, our work aims to use as a productive resistance the notion of Material Intensity described below as both a foil and measure to current concepts of simulation and intensive modeling in architectural computation. The holding of SG 2012 aimed to stage this resistance in the form of workshop, round-table discussions, lectures and symposia, with the outcome attempting to define a new synthetic notion of material intensities in modes of architectural production. This paper aims to form the basis of a continued exploration and development of this work. In summary we focused on: 1-Intensive thinking as derived from the material sciences as an actual and philosophical framework that emphasizes qualitative attributes, which is likened to behavior, simulation, and dynamic modeling. Extensive attributes lead to analytical, representational and static modeling. 2-Material practices can also be formed and as a result of this method of thinking. As demonstrated by the glasswork of Evan Douglis, ‘paintings’ by Perry Hall—the managed complexity possible by working with materials during intensive states of change allow for scalar, morphological and performative shifts according to a designer’s criteria. 3- Although both are necessary and actually complement each other, architects need to ‘catch-up’ to intensive thinking in process and modeling strategies. Our methods rely on static modeling that yield often complicated frameworks and results, wherein accepting methods of dynamic modeling suggests the capacity to propose complex and nuanced relationships and frameworks.
keywords	Material Intensities , Intensive Thinking , Material Practice
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:56

_id	caadria2017_142
id	caadria2017_142
authors	Kaijima, Sawako, Tan, Ying Yi and Lee, Tat Lin
year	2017
title	Functionally Graded Architectural Detailing using Multi-Material Additive Manufacturing
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 427-436
doi	https://doi.org/10.52842/conf.caadria.2017.427
summary	The paper presents a future architectural detailing strategy enabled by the design of functionally graded materials (FGM). In specific, our proposal suggests the possibility of removing mechanical fasteners and adhesives from joint details. This is achieved by combining the principles of interlocking joineries found in traditional timber structures and current Multi-Material Additive Manufacturing (MMAM) technology to materialise FGMs. FGM belongs to a class of advanced materials characterised by variation in properties as the dimension varies by combining two or more materials at a microscopic scale (Mahamood et al. 2012). FGM is ubiquitous in nature and, when properly designed, can exhibit superior performance characteristics compared to objects comprised of homogeneous material properties. With the aim of developing interlocking details with improved performance, reliability, and design flexibility, we focus on controlling material stiffness, joint fitting, and geometry through the design of the microscopic material layout. A case study design will be presented to illustrate the process.
keywords	Functionality Graded Material; Multi-Material Additive Manufacturing ; Architectural Detailing; Interlocking Joints
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_95
id	ecaade2012_95
authors	Ladurner, Georg; Gabler, Markus; Menges, Achim; Knippers, Jan
year	2012
title	Interactive Form-Finding for Biomimetic Fibre Structures: Development of a Computational Design Tool and Physical Fabrication Technique Based on the Biological Structure of the Lichen
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 519-529
doi	https://doi.org/10.52842/conf.ecaade.2012.2.519
wos	WOS:000330320600055
summary	This contribution shows a biomimetic approach to design and produce fibrous structural elements derived from the morphology of the biologic archetype ‘the lichen’. The physical form fi nding strategy allows for a novel self-organised reinforcement for fibrous composite systems. A computational design tool has been developed, based on the fi ndings of various physical models. The digital device allows for shape control and therefore an interaction to and manipulation of the fabrication process. Since the form fi nding algorithms of the tool are based on physical experiments,every geometry is derived through the program and has its counterpart in production. For example: the fibre density in the model can be adjusted which leads to different geometries. In production the chosen denseness is utilised, thus, the production yields automatically to the desired load-optimized geometry found in the form-finding tool.
keywords	Biomimetics; Form-finding; Self-organization; Emergence; Fibre structures
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_104
id	ecaade2012_104
authors	Liapi, Marianthi; Oungrinis, Konstantinos-Alketas; Voyatzaki, Maria
year	2012
title	Sensponsive Playscapes: A Pedagogical Design Approach to Manifest and Promote the Physical Digital Continuum
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 343-351
doi	https://doi.org/10.52842/conf.ecaade.2012.2.343
wos	WOS:000330320600035
summary	This paper chronicles an intensive student workshop on sensponsive architecture, from the educators’ point of view, underlying the pedagogical notes on this new design approach that employs digital design tools and electronic assemblies to creatively experiment with human-computer interaction. The workshop presented the theoretical, computational and fabricating frameworks for a human-centered approach to spaces with sensponsive partitions that respond timely with sense, displaying an adaptive behavior through time. The workshop theme was further specialized to direct the design outcome toward sensponsive environments for children that can help them perceive, experience and develop a meaningful understanding of the world around them through play.
keywords	Sensponsive architecture; student workshop; arduino assemblies; children’s spaces
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia12_79
id	acadia12_79
authors	Nicholas, Paul ; Tamke, Martin ; Thomsen, Matte Ramsgard ; Jungjohann, Hauke ; Markov, Ivan
year	2012
title	Graded Territories: Towards the Design, Specification and Simulation of Materially Graded Bending Active Structures"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 79-86
doi	https://doi.org/10.52842/conf.acadia.2012.079
summary	The ability to make materials with bespoke behavior affords new perspectives on incorporating material properties within the design process not available through natural materials. This paper reports the design and assembly of two bending-active, fibre-reinforced composite structures. Within these structures, the property of bending is activated and varied through bespoke material means so as to match a desired form. Within the architectural design process, formal control depends upon design approaches for material specification and simulation that consider behavior at the level of the material element as well as the structure. We describe an evolving approach to material specification and simulation, and highlight the digital and material considerations that frame the process.
keywords	graded materials , composite materials , bending-active structures , material properties , material behaviour , simulation , material specification , performance-based design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	sigradi2012_89
id	sigradi2012_89
authors	Pimentel, Diego; Cataldi, Mariano; Muñiz, Gonzalo; Castiarena, Agustin; Castillo, Noelia; Retamales, Lautaro Castillo; Facelli, Laura; Lepore, Evangelina
year	2012
title	Autómatas Reciclados. Una experiencia de arte generativo low-cost dentro de la currícula de grado [Recycled Automata. An experience of generative art ‘low cost’ into the degree curriculum]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 34-37
summary	The following paper develop the analysis and description of the creative process of generative artwork designed within the framework of the Multimedia Arts 2 course, at the second year of the degree course. Reflecting upon the impact of human behavior on nature, students projected a work generated by using discarded materials, taken to its signification, for a new use.
keywords	arte generativo; autómatas; resignificación; educación
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia12_447
id	acadia12_447
authors	Rossi, Dino ; Nagy, Zoltan ; Schlueter, Arno
year	2012
title	Adaptive Distributed Architectural Systems
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 447-456
doi	https://doi.org/10.52842/conf.acadia.2012.447
summary	Artificial Intelligence has a long and rich history in the field of architecture. Building upon this history, we clarify the term “adaptive” and its use within the field. This allows us to explore the application of adaptive systems to architectural design through the prototyping of an adaptive solar envelope (ASE). The building envelope was chosen because it is a common place to address issues of energy performance and occupant comfort and thereby offers an ideal scenario in which to explore the negotiative potential of adaptive systems in architecture. The ASE prototype addresses issues of distributed shading, solar power generation through integrated thin film photovoltaics, and daylight distribution. In addition, building envelopes, being the most publically visible part of a building, play an important role in the aesthetic result of a design. Therefore, conceiving buildings as dynamic systems with the ability to adapt to the fluctuating environments in which they exist opens new aesthetic possibilities for designers. Additionally we present examples of student work created during workshops based on the theme of integrating adaptive distributed systems into architectural design. We argue that with presently available technology, and an increased exposure of architecture students and practitioners to adaptive design techniques, adaptive architectures will soon become a regular element of the built environment.
keywords	adaptive , distributed , systems , reinforcement , learning , architecture , design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2012_142
id	ecaade2012_142
authors	Shin, Dongyoun; Arisona, Stefan Müller; Georgakopoulou, Sofia; Schmitt, Gerhard; Kim, Sungah
year	2012
title	A Crowdsourcing Urban Simulation Platform on Smartphone Technology: Strategies for Urban Data Visualization and Transportation Mode Detection
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 377-384
doi	https://doi.org/10.52842/conf.ecaade.2012.2.377
wos	WOS:000330320600039
summary	We propose a crowdsourcing simulation environment that brings human intention into the urban simulator. Our fundamental goal is to simulate urban sustainability by employing direct human interaction. In this paper we present a prototype mobile phone application that implements a novel transportation mode detection algorithm. The mobile phone application runs in the background and continuously collects data from the built-in acceleration and network location sensors. The collected data is analyzed by the transportation mode detection algorithm and automatically partitioned into activity segments. A key observation of our work is that walking activity can be robustly detected in the data stream and acts as a separator for partitioning the data stream into other activity segments. Each vehicle activity segment is then sub-classifi ed according to the type of used vehicle. Our approach yields high accuracy despite the low sampling interval and not requiring GPS data that bring minimized device power consumption. Ultimately, the collected information can be translated into real-time urban behavior and will indicate sustainability, both on the personal and the city level.
keywords	Crowdsourcing simulation platform; transport mode detection; social sensing; urban sustainability; mobile application
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: