Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
wos	WOS:000330320600024
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_295
id	acadia12_295
authors	Dierichs, Karola ; Menges, Achim
year	2012
title	Functionally Graded Aggregate Structures: Digital Additive Manufacturing With Designed Granulates
doi	https://doi.org/10.52842/conf.acadia.2012.295
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 295-304
summary	In recent years, loose granulates have come to be investigated as architectural systems in their own right. They are defined as large numbers of elements in loose contact, which continuously reconfigure into variant stable states. In nature they are observed in systems like sand or snow. In architecture, however, they were previously known only from rare vernacular examples and geoengineering projects, and are only now being researched for their innate material potentials. Their relevance for architecture lies in being entirely reconfigurable and in allowing for structures that are functionally graded on a macro level. Hence they are a very relevant yet unexplored field within architectural design. The research presented here is focused on the potential of working with designed granulates, which are aggregates where the individual particles are designed to accomplish a specific architectural effect. Combining these with the use of a computer-controlled emitter-head, the process of pouring these aggregate structures can function as an alternative form of 3D printing or digital additive manufacturing, which allows both for instant solidification, consequent reconfiguration, and graded material properties. In its first part, the paper introduces the field of research into aggregate architectures. In its second part, the focus is laid on designed aggregates, and an analytical design tool for the individual grains is discussed. The third part presents research conducted into the process of additive manufacturing with designed granulates. To conclude, further areas of investigation are outlined especially with regard to the development of the additive manufacturing of functionally graded architectural structures. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Aggregate Architectures , Digital Additive Manufacturing , Functionally Graded Materials
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_141
id	ecaade2012_141
authors	Castro e Costa, Eduardo; Coutinho, Filipe; Duarte, José Pinto; Krüger, Mário
year	2012
title	Modelling Alberti’s Column System: Generative Modelling and Digital Fabrication of Classical Architectural Elements
doi	https://doi.org/10.52842/conf.ecaade.2012.2.469
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 469-477
summary	The research presented further is part of the Digital Alberti research project, which aims to assess the infl uence of Leon Batista Alberti’s theory on Portuguese architecture, through the use of digital technologies. One of the project tasks implied computational and physical modelling of Alberti’s column system. Development of the computational model implied decoding Alberti’s treatise on architecture De re aedifi catoria into a consistent set of parameters and relationships, and then implementing these into generative parametric computer programs through visual programming language Grasshopper. This computational model is able to automatically generate physical models of classical columns according to Alberti’s canons. These digital models were then materialized through production of physical models, through rapid prototyping and digital fabrication technologies. Special attention is given to the CNC stone milling of a Corinthian capital.
wos	WOS:000330320600049
keywords	Alberti; De re aedifi catoria; Column system; Generative modelling; Digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_107
id	caadria2012_107
authors	Gerber, David and A. Senel Solmaz
year	2012
title	PARA-Typing the making of difference: Associative parametric design methodologies for teaching the prototyping of material affect
doi	https://doi.org/10.52842/conf.caadria.2012.233
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 233–242
summary	PARA-Typing the Making of Difference presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. These design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation. Then through associative parametric design technologies and methodologies, modular fields were design explored and developed in concert with material properties and constraints. Utilising digital fabrication full-scale installations were designed, manufactured, and constructed as tiled walls that created differentiated space within site-specific configurations.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; tectonics
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2012_042
id	caadria2012_042
authors	Globa, Anastasia and Michael Donn
year	2012
title	Digital to physical: Comparative evaluation of three main CNC fabrication technologies adopted for physical modelling in architecture
doi	https://doi.org/10.52842/conf.caadria.2012.327
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 327–336
summary	Recently, digital fabrication, being a logical extension of computer-aided technology to the material world, was introduced into the field of computational design in architecture. The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of the main Computer Numerically Controlled (CNC) fabrication technologies adopted for physical modelling in architecture. This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models. This experimental research systematically explores digital fabrication as a computer-aided modelling tool, using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
keywords	Design process; digital fabrication; architectural model
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210401
id	ijac201210401
authors	Globa, Anastasia; Michael Donn, Simon Twose
year	2012
title	Digital To Physical: Comparative Evaluation Of Three Main CNC Fabrication Technologies Adopted For Physical Modelling In Architecture
source	International Journal of Architectural Computing vol. 10 - no. 4, 461-480
summary	The objective of this experimental study is to investigate and systematise data regarding the production issues and limitations of Computer Numerically Controlled fabrication technologies typically adopted for physical modelling in architecture.This study also aims to observe the value of potential feedback to the design process from different types of digitally fabricated architectural models.This experimental research systematically explores digital fabrication as a computer-aided modelling tool using two international architectural competition projects as case studies: the design of a skyscraper and relocatable schools. Developed by the authors especially for this research paper, each case study acts as a test bed to compare and evaluate digital production techniques adopted for physical modelling in architecture. Designs go through a process of refinement using CNC fabrication as an integral part of the design process. Each step in the process is closely evaluated as to its effectiveness according to a matrix of feedback criteria.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_221
id	ecaade2012_221
authors	Gül, Leman Figen
year	2012
title	Educating new generation of architects
doi	https://doi.org/10.52842/conf.ecaade.2012.1.077
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 77-85
summary	Recently the developments in and the extensive use of digital design technologies have brought about fundamental changes in the way architects design and represent. As a result of the changing architectural design practise, there have been significant changes in architectural curricula to accommodate new demands, opportunities, processes and potentials provided by advance digital design tools and fabrication-based design techniques. Based on this new demand in design education, a number of additional subjects have been introduced in architectural curricula facilitating the experimentation of free-form /complex design artefact, building components and material attributes. Reported in this paper is the experience of the students as well is a commentary on the quality of the outcomes they achieved whilst confronting this new learning experience. Based on the analysis of collected questionnaire answers, this paper will document the issues that the students experienced during digital design development, the modelling and assembling level as well as in the process of fabrication.
wos	WOS:000330322400007
keywords	Digital architecture; fabrication; design teaching and learning
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia12_187
id	acadia12_187
authors	Mei-Ling, Lin ; Han, Ling ; Kothapuram, Shankara ; Jiawei, Song
year	2012
title	Digital Vernacular
doi	https://doi.org/10.52842/conf.acadia.2012.187
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 187-195
summary	Digital Vernacular investigates the potential of the process of depositing a paste like material with precision using a CNC device which has produced an innovative system for design and fabrication of environmentally responsive housing. Architectural practice has been greatly impacted by technical innovations in the past, usually new building types emerge as part of new ideologies. Yet the current revolution in computer-aided design and fabrication has architecture focusing on form – without questioning what these new processes can bring for the masses. The research project 'Digital Vernacular' has investigated the potential of using CNC technology for the production of housing. It has focused on the design of the machinic devices as well as computational design tools, and revolves around the concept of fabrication on site. Using an additive and layered manufacturing process and locally available material, the project proposes a revolutionary new digital design and fabrication system that is based on one of the oldest and most sustainable construction methods in the world. The main potentials of this method are not to create complex forms for the sake of design, but to use parametric control to adapt each design to the specificities of its site. Using geometrical rules found during many research experiments with real material behaviour, a new architectural language is created that merges several environmental functionalities into a single integrated design.
keywords	Digital , Vernacular , CNC , CAM , Housing , fabrication , environmental
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2012_65
id	sigradi2012_65
authors	Garagnani, Simone; Mingucci, Roberto; Luciani, Stefano Cinti
year	2012
title	Collaborative design for existing architecture: the Building Information Modeling as a frontier for coordinated process
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 96-100
summary	Building Information Modeling (BIM) has been considered as an emerging collaborative strategy since its introduction, meant for AEC industry and heading to benefits in terms of costs and design quality during the whole building lifecycle. BIM approach, originally developed for new projects, can be successfully applied to existing contexts using TLS surveys to collect point clouds and turn them later into smart digital models, taking advantage of new technologies and methods. This paper addresses these themes paying attention to issues and opportunities, considering BIM as a paramount tool to collect and manage data destined to multiple disciplines
keywords	BIM; laser scanner; AEC digital tools; architectural modeling; collaborative design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia12_259
id	acadia12_259
authors	Sabin, Jenny E.
year	2012
title	The Greenhouse & Cabinet of Future Fossils: Interfacing Nature in the Built Environment
doi	https://doi.org/10.52842/conf.acadia.2012.259
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 259-268
summary	The Greenhouse and Cabinet of Future Fossils was commissioned by the American Philosophical Society Museum, funded by Heritage Philadelphia Program, a program of The Pew Center for Arts & Heritage. The Greenhouse and Cabinet of Future Fossils attempts to gather, digest, and disseminate information about nature while also incorporating cutting-edge design and fabrication techniques to ultimately produce a greenhouse of the future. The pavilion structure is populated with cold frame modules and futuristic ceramic and 3D printed curiosities, prefabricated and assembled in the Jefferson Garden, Philadelphia. Taking inspiration from the artifacts in the exhibition, Of Elephants and Roses: Encounters with French Natural History, 1790–1830, the greenhouse revisits 19th-century thematic issues related to nature, culture, and the city to offer new interpretations of greenhouse architecture as urban hybrid ecosystems whose nonstandard form features new material and fabrication logics that inspire a shift away from a technical approach to sustainable architecture to one rooted in design and the built environment. The pavilion mobilizes concepts of event as the public is invited to actively participate in the planting of the cold frames, thus contributing to the actual secondary structure of the greenhouse, and then disassembling the structure at the end of the installation period and disseminating the planted materials. As a conceptual and provocative backdrop to this project, references are made to important contributions recently made by a small group of accomplished scientists, architects, and researchers at a university symposium whose central theme was to discuss next steps for sustaining sustainability.
keywords	ecology , emerging technologies , alternative materials , greenhouse architecture , digital fabrication , designbuild , sustainability
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2012_123
id	caadria2012_123
authors	Urvi, Sheth
year	2012
title	Parametricism: Indian social need in complexity and chaos
doi	https://doi.org/10.52842/conf.caadria.2012.433
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 433–442
summary	Indian society living in its physical context and administrative boundaries is complex. The contemporary built environment imitating perceived advance technology where development is purely measured by material consumption is chaos. The present approach to meet dynamic and diverse demands emerging from the complexity and economical boom is fragmented and superficial. The challenge is to find order – the hidden patterns - through an approach that analysis and interprets the complexity with the holistic vision to offer contextual variety inclusive of qualitative richness in the existing chaos. Considering that Parametricism is based on algorithms and mathematics it is generally understood as quantification where as it is also important to understand its qualitative impact. The paper is an inquiry on qualitative gains of Parametricism that helps shaping society in Indian context. This is demonstrated by bringing forward understanding on qualitative gains of Parametricism exemplified with an academic exploration and inter-relating them with Indian examples to showcase the opportunities.
keywords	Parametricism; complexity; chaos
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia12_251
id	acadia12_251
authors	Winn, Kelly ; Vollen, Jason ; Dyson, Anna
year	2012
title	Re-Framing Architecture for Emerging Ecological and Computational Design Trends for the Built Ecology
doi	https://doi.org/10.52842/conf.acadia.2012.251
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 251-258
summary	The dualities of ‘Humanity and Nature’, ‘Organic and Inorganic’, Artificial and Synthetic’ are themes that have permeated architectural discourse since the beginning of the 20th c. The interplay between nature and machine can be directly related to the 19th c. discussion of nature and industrialism that was exemplified in the works of Louis Sullivan and Frank Lloyd Wright that spawned the organic architect movement. Echoes of these dichotomous themes have been resuscitated with the introduction of computational and information processing as a fundamental part of contemporary theory and critical praxis. The ability to go beyond simplistic dualities is promised by the introduction of data informed multi-variable processes that allow for complex parametric processes that introduce a range of criteria within evaluative design frameworks. The investigations detailed herein focuses on surface morphology development that are explored and evaluated for their capacity to reintegrate the ideas from genetic and developmental biology into an architectural discourse that has historically been dominated by the mechanistic metaphor perpetuated throughout the modern era. Biological analogues in nature suggest that the zone of decoration plays an important role in the environmental response and climate adaptability of architecture. The building envelope represents the greatest potential energetic gain or loss, as much as 50 %, therefore the architectural envelope plays the most significant role in energy performance of the building. Indeed, from an environmental performance standpoint, the formal response of the envelope should tend toward complexity, as biology suggests, rather than the reduced modernist aesthetic. Information architecture coupled with environment and contextual data has the potential to return the focus of design to the rhizome, as the functional expressions of climatic performance and thermal comfort interplay within other cultural, social and economic frameworks informing the architectural artifact. Increasing the resolution that ornament requires in terms of geometric surface articulation has a reciprocal affect on the topological relationship between surface and space: the architectural envelope can respond through geometry on the surface scale in order to more responsively interface with the natural environment. This paper responds to increasing computational opportunities in architectural design and manufacturing; first by exploring the historical trajectory of discourse on nature vs. machine in architecture, then exploring the implications for utilizing environmental data to increase the energy performance of architecture at the building periphery, where building meets environment creating the synthetic Built Ecology.
keywords	ecology , biomimicry , biophilia , natural , synthetic , artificial , parametric , digital , function , production , performance , modernism , form , ornament , decoration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	acadia20_58
id	acadia20_58
authors	Yogiaman, Christine; P. Pambudi, Christyasto; Kumar Jayashankar, Dhileep; Chia, Peizhi; Quek, Yuhan; Tracy, Kenneth
year	2020
title	Knitted Bio-Material Assembly
doi	https://doi.org/10.52842/conf.acadia.2020.1.058
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 58-65.
summary	Bio-fabrication of materials opens up novel opportunities for designers to innovate the functional possibilities of the designed output through variations in fabrication processes. Literature has seen an increased interest in this emerging material design practice that has recently been defined as “growing design” (Myers 2012). Our research work expands on the definition of this emerging material design practice to engage digital design and fabrication procedures in the intersection of biology, craft, and design. The aim is to cultivate a new material type—knitted textile mycelium composite that has the capability to augment final material composite properties and provide formal freedom to designers. 3D CNC knitting enables the fabrication of knitted textile that has control over the specificity of each knit loop, opening up design possibilities to grade functional differentiation when the knitted textile is used as a sacrificial mold for the cultivation of mycelium composite. The research presents various design-to-fabrication workflows that facilitate working with the indeterminate nature of 3D-knitted membrane and the dynamic nature of cultivating mycelium composite growth. Two architecture-scale prototype units were fabricated and cultivated, demonstrating the range of design freedom for this new material type.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	caadria2012_131
id	caadria2012_131
authors	Ambrose, Michael A.
year	2012
title	Digital conception(s): Architectural concepts of digital design and making
doi	https://doi.org/10.52842/conf.caadria.2012.699
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 699–708
summary	This paper presents an investigation of probative works of architectural thought and production executed in various forms of digital design and computational media. The applied design research focuses on an examination of the procedure or process constructed to both develop exact, precise digital models and constructed processes that result in design outcomes that cannot be pre-visioned. The changing position of the conceptualisation within the design process continually changes the relationship of the digital work and the computational framework. The work challenges one to interpret design processes of translation and transformation, through the continual oscillation between developed in pursuit of known results and constructed methods for making, in an effort to unravel the pretext of the singular point of view to reveal the intention of the design conception(s). The projects discussed here focus on relationships between the projection of space in architectural representation and the production of architectural form through complex geometries relative to discontinuities and the way in which they agitate and alter one another. DIGITAL conception(s) operate across three primary areas of research; animation, conceptualisation and fabrication. The work oscillates between digital and physical artefacts that intertwine digital/physical workflows while simultaneously engaging temporal issues of time based media through motion graphics and animate constructs.
keywords	Design representation; visualisation; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
wos	WOS:000330320600046
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: