Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 126

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_383
id	acadia12_383
authors	Feringa, Jelle
year	2012
title	Implicit Fabrication, Fabrication Beyond Craft: The Potential of Turing Completeness in Construction"
doi	https://doi.org/10.52842/conf.acadia.2012.383
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 383-390
summary	This paper addresses the limited shared vocabulary of landscape architecture and architectural design, evident in the application of terms such as “spatial design” and “spatial planning.” In their current usage, such terms emphasize the visible, terrestrial, pedestrian-perspective level, often to the absolute exclusion of a spatial, i.e., volumetric comprehension of the environment. This deficit is acutely evident in the teaching of landscape architecture and architecture and discussion of these fields’ shared ground. The dominant document type for mapping such analysis and design is the plan, or three-dimensional representations of the same, restricted to an extrusion or height map. GIS techniques in spatial design tend to be weighted toward visual, surface-based data (slope analysis, exposure, viewshed, etc.). Within this domain, our goal is to transform aspects of the intangible—the characteristics of open space itself—into a form that is legible, quantifiable, and malleable.
keywords	evolutionary fabrication , computer vision , robotics , self-assembly , stigmergy
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	sigradi2012_177
id	sigradi2012_177
authors	Davis, Felecia
year	2012
title	Form Active Translations: Knitted Textiles to 3D Printed Textiles
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 392-396
summary	Material translation as a driver of innovation through craft, specifically the translation from machine knitted textiles to 3D rapidly prototyped textiles is discussed in this paper. If architects and designers can develop methods to translate existing textile structures and behaviors, then architects and designers can harness the vast extant knowledge base that goes into the design and fabrication of geometric textile structures and resultant behaviors to develop new materials and tools to construct active building systems that use the pliability of textiles to advantage.
keywords	3D Printed Textiles, 3D Printing, Architextiles, Knitted Materials
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_491
id	acadia12_491
authors	Feringa, Jelle ; Søndergaard, Asbjørn
year	2012
title	An Integral Approach to Structural Optimization and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2012.491
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 491-497
summary	Abstract Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure. A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase, the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive. This paper reports ongoing research efforts on the development of a cost effective methodology for the realization of TO concrete structures using HWC.
keywords	Topology optimization , robotics , hotwire cutting , ruled surfaces , advanced concrete structures , formwork , EPS
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	ecaade2012_261
id	ecaade2012_261
authors	Feringa, Jelle; Sondergaard, Asbjorn
year	2012
title	Design and Fabrication of Topologically Optimized Structures; An Integral Approach - A Close Coupling Form Generation and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.2.495
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 495-500
wos	WOS:000330320600052
summary	Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC) (Mcgee 2011). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure (Sondergaard & Dombernowsky 2011). A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase (Xie 2010), the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive.
keywords	Topology optimization; robotics; hotwire cutting; EPS formwork; concrete structures
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2023_318
id	ecaade2023_318
authors	Imam, Chowdhury Ali, Othman, Hanin Abdel Salam and Çapunaman, Özgüç Bertug
year	2023
title	Robotic Plaster Carving: Formalizing subtractive detailing of plaster surfaces for construction and crafts
doi	https://doi.org/10.52842/conf.ecaade.2023.1.397
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 397–406
summary	Plaster has been a fundamental material in numerous interior and exterior applications in architectural construction due to its fire-resistant properties and capabilities for intricate detailing. Moreover, prior to the widespread adoption of computer-aided design tools, plaster played a crucial role in historic preservation and architectural education (Mankouche & Schulte, 2012). While the use of decorative plaster elements in architectural construction has waned in popularity, the renewed interest in plaster within the context of advanced robotic fabrication offers a compelling basis for research. This paper presents an investigation into robotic plaster carving for adding detail and texture to plaster surfaces. Within the scope of this study, we identify and systematically examine various fabrication and material parameters for emergent geometries and fabrication defects, subsequently formalizing this robotic workflow for diverse applications in construction and crafts. Among these parameters, we primarily concentrate on toolpath geometry, tool orientation, carving speed, carving profile, and aggregation of carving strokes. Through this bottom-up approach, our objective is to enhance the understanding of tool-material interaction during the fabrication process and achieve improved control over the resulting artifact. Building on these insights, we demonstrate how the proposed robotic plaster carving workflow can be employed for subtractive surface detailing in architectural construction and digital crafts.
keywords	Robotic Fabrication, Plaster Carving, Surface Detailing, Digital Craft
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia12_177
id	acadia12_177
authors	Mankouche, Steven ; Bard, Joshua ; Schulte, Matthew
year	2012
title	Morphfaux: Probing the Proto-Synthetic Nature of Plaster Through Robotic Tooling
doi	https://doi.org/10.52842/conf.acadia.2012.177
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 177-186
summary	Morphfaux is an applied research project that revisits the virtually lost craft of plaster to explore its potential for producing thickened architectural environments through the use of contemporary digital technology. The research challenges the flatness of modern, standardized dry wall construction and explores plaster’s malleability as a material that can be applied thick and thin, finished to appear smooth or textured, and tooled while liquid or cured. If the invention of industrialized modern building products such as drywall led to the demise of the plasterer as a tradesperson, our research seeks alliances between the abilities of the human hand and those of automation. By transforming historic methods using new robotic tools, Morphfaux has broadened the possibilities of architectural plaster. While our research has produced forms not possible by human skill alone, it also clearly illustrates a symbiotic relationship between the human body and robotic machines where human dexterity and robotic precision are choreographed in the production of innovative plastering techniques.
keywords	Digital Practice , Robotic Fabrication , Digital Craft , Tacit Knowledge , Material Resistance , Synthetic Material , Plaster , Variable Tools
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2012_82
id	ecaade2012_82
authors	Mohammad, Kareem El Sayed; Hanafi, Mohammad Assem; Nasr, Mohammad
year	2012
title	A Closer Perspective on Fabrication Realities
doi	https://doi.org/10.52842/conf.ecaade.2012.2.169
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 169-179
wos	WOS:000330320600017
summary	Digital Fabrication has arguably stirred the return of the architect to the long-held position as a master builder. The close engagement with materials offered by the digital fabrication technologies places necessary limitations and calls the architects for a deeper understanding of and awareness about the fabrication realities during the design process. The research conducted uses parametric modeling for the alteration of the design according to a wide range of infl uences, one of which is fabrication. This paper offers a close perspective on some fabrication necessities and limitations that emerged through the manufacturing of a number of scaled models of a parametrically designed shed and a full scale pavilion. The scope of this work falls into the realm of physical testing, tolerance, structure and assembly. It also points out the fabrication parameters that were part of the digital setting used to create the physical models. The paper argues that craft is still practically alive when deploying digital technologies as it has been ever present in the pre-digital era.
keywords	Digital fabrication; tolerances; parametric design; assembly; Laser cutting
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_292
id	ecaade2012_292
authors	Reinhardt, Dagmar ; Martens, William ; Miranda, Luis
year	2012
title	Acoustic Consequences of Performative Structures Modelling Dependencies between Spatial Formation and Acoustic Behaviour
doi	https://doi.org/10.52842/conf.ecaade.2012.1.577
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 577-586
wos	WOS:000330322400059
summary	The paper discusses an interdisciplinary exchange between parametric design and acoustic simulation. It reviews a strategic development of temporary dynamic structures that can be manipulated by intersecting variations of formation in generative architecture with acoustic simulation. The research investigates drivers that interface knowledge between parametric design, structural engineering and fabrication, interaction design and acoustics, and theatre and performance. It reviews the simulation of a temporary theatre installation into an existent industrial hall, whereby different formation of a modular structure are explored, and the acoustic effects of this installation are evaluated in relation to an enhancement of the audiences spatial and acoustic experience. The research goes beyond the morphological, aesthetic or structural values that have become key aspects of contemporary digital architecture, and relates them to the field of auralisation (forecasting acoustic behaviour). In that manner, the simulation and analysis of a future (material, spatial) objects is developed through the communication of an interdisciplinary team, thus exploring synergetic qualities of the physical and the digital.
keywords	Computational design; generative geometries; acoustic simulation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia20_58
id	acadia20_58
authors	Yogiaman, Christine; P. Pambudi, Christyasto; Kumar Jayashankar, Dhileep; Chia, Peizhi; Quek, Yuhan; Tracy, Kenneth
year	2020
title	Knitted Bio-Material Assembly
doi	https://doi.org/10.52842/conf.acadia.2020.1.058
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 58-65.
summary	Bio-fabrication of materials opens up novel opportunities for designers to innovate the functional possibilities of the designed output through variations in fabrication processes. Literature has seen an increased interest in this emerging material design practice that has recently been defined as “growing design” (Myers 2012). Our research work expands on the definition of this emerging material design practice to engage digital design and fabrication procedures in the intersection of biology, craft, and design. The aim is to cultivate a new material type—knitted textile mycelium composite that has the capability to augment final material composite properties and provide formal freedom to designers. 3D CNC knitting enables the fabrication of knitted textile that has control over the specificity of each knit loop, opening up design possibilities to grade functional differentiation when the knitted textile is used as a sacrificial mold for the cultivation of mycelium composite. The research presents various design-to-fabrication workflows that facilitate working with the indeterminate nature of 3D-knitted membrane and the dynamic nature of cultivating mycelium composite growth. Two architecture-scale prototype units were fabricated and cultivated, demonstrating the range of design freedom for this new material type.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2012_131
id	caadria2012_131
authors	Ambrose, Michael A.
year	2012
title	Digital conception(s): Architectural concepts of digital design and making
doi	https://doi.org/10.52842/conf.caadria.2012.699
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 699–708
summary	This paper presents an investigation of probative works of architectural thought and production executed in various forms of digital design and computational media. The applied design research focuses on an examination of the procedure or process constructed to both develop exact, precise digital models and constructed processes that result in design outcomes that cannot be pre-visioned. The changing position of the conceptualisation within the design process continually changes the relationship of the digital work and the computational framework. The work challenges one to interpret design processes of translation and transformation, through the continual oscillation between developed in pursuit of known results and constructed methods for making, in an effort to unravel the pretext of the singular point of view to reveal the intention of the design conception(s). The projects discussed here focus on relationships between the projection of space in architectural representation and the production of architectural form through complex geometries relative to discontinuities and the way in which they agitate and alter one another. DIGITAL conception(s) operate across three primary areas of research; animation, conceptualisation and fabrication. The work oscillates between digital and physical artefacts that intertwine digital/physical workflows while simultaneously engaging temporal issues of time based media through motion graphics and animate constructs.
keywords	Design representation; visualisation; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
wos	WOS:000330320600046
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_73
id	sigradi2012_73
authors	Amen, Fernando García; Álvarez, Marcelo Payssé; Bonifacio, Paulo Pereyra; Meirelles, Lucía
year	2012
title	Fabricando mundos. Realidad, simulacro e inmanencia [Manufacturing worlds. Reality, simulacra and immanence]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 645-648
summary	Digital manufacturing in both as art and technology is a new way of designing, re-creation and re-invention of reality. This paper considers, from an epistemological point of view, the process of digital fabrication and its hyperlinks to known and simulated reality, and its ontological nature. Through documentation and methodological approach to the construction of a Moebius strip, this paper analyzes the nature and specifications of digital manufacturing. For this purpose, it makes a study of some strip properties and establishes a correlation within digital manufacturing, emphasizing similarities, complexities and shared qualities. Thus, it aims to create a reflection and a critical perspective on the complex logic of creation and simulation of knowable reality. And also it contributes to explore a theoretical corpus on the role of architects and designers in this incipient and ongoing discipline.
keywords	Fabricación digital, Realidad, Simulacro, Inmanencia
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2012_404
id	sigradi2012_404
authors	Angelo, Alex; Neves, Heloisa; de Campos, Paulo Eduardo Fonseca
year	2012
title	Fab Lab Kids: Oficina de projetos socioambientais para crianças de escolas públicas fazendo uso da eletrônica e da fabricação digital [Fab Lab Kids: Workshop for environmental projects public school children making use of electronics and digital fabrication]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 383-387
summary	This article describes the process of theoretical and practical Fab Lab Kids Project in Brazil and in more detail the “Fab Lab Kids: Workshop environmental projects for public school children through manufacturing and digital electronics”, the most recent edition of this project, which consists conducting an experimental workshop with students from public school in the city of Guarulhos, São Paulo. Through the concept of learning by doing, children are exposed to the possibility of acting on the environment and the objects surrounding them, proposing objects that might solve socio-environmental issues, which are produced via electronics and digital fabrication.
keywords	Fabricação Digital, Eletrônica, Educação, Redes, Fab Lab
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
wos	WOS:000330322400002
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
wos	WOS:000330320600047
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: