Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 282

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_195
id	sigradi2012_195
authors	dos Santos, Denise Mônaco; Tramontano, Marcelo
year	2012
title	Hibridismos na cidade: considerações sobre interfaces tangíveis urbanas [Hybridism in the city: thoughts about tangible urban interfaces]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 162-166
summary	The consideration about contemporary urban spaces incorporates a set of investigations linked to spatial implementation of digital technologies. This paper is about the different ways in which tangible computational interfaces have been arranged in urban environments, be they projections onto urban surfaces, interactive façades, or even architecture and interactive and/or responsive urban objects. It examines the nature of this phenomenon from perspectives presented by different authors and based on systematized information on a wide array of interfaces. It also posits some significant attributes that should be taken into account when performing a close examination of these interventions. Its aim is to contribute theoretical explorations to the study of hybrid urban spaces.
keywords	Interfaces tangíveis urbanas; espaços híbridos; espaços urbanos contemporâneos
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
doi	https://doi.org/10.52842/conf.caadria.2012.465
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2012_127
id	caadria2012_127
authors	Herr, Christiane M.
year	2012
title	Non-trivial interactive facades
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 99–108
doi	https://doi.org/10.52842/conf.caadria.2012.099
summary	This paper presents a discussion of contemporary interactive media façades that complements the currently primarily technical framing of this field of research. Media façades, in the form of digitally orchestrated façade illumination, are discussed here as sites of potential encounter and interaction that form part of the public sphere. These aspects seem both underestimated as well as underused as media façades tend to be limited to pre-programmed and primarily ornamental trivial response patterns, or to serving as oversized displays. This paper discusses media façades from an architectural rather than a technological perspective and critically assesses the promises of interactivity as well as implications of such façades on urban public space.
keywords	Media façades; interactive façades; public space; nontrivial machines; cybernetics
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia12_419
id	acadia12_419
authors	Hsiao, Chih-Pin ; Davis, Nicholas M. ; Do, Ellen Yi-Luen
year	2012
title	Dancing on the Desktop
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 419-428
doi	https://doi.org/10.52842/conf.acadia.2012.419
summary	Dancing on the Desktop is a gesture-based modeling system. In this prototype, two interactive display screens are projected on the top of a desk and the wall behind it to show the plan and perspective views of an architectural model, respectively. A depth camera detects gestural interactions between these two displays to create an immersive gestural interaction space to manipulate the model. Additionally, visual images and text are projected on the user’s hands to provide different types of feedback about gestural interactions. We argue that Dancing on the Desktop helps users develop an embodied understanding of the spatial and volumetric properties of virtual objects. In this paper, we will review related gestural prototypes and examine their shortcomings. Then, we will introduce distributed cognition and describe how it helped our system address the shortcomings of typical gestural prototypes. Next, we will describe the implementation details and explain each type of gestural interaction in detail. Finally, we will discuss our preliminary tests and conclusions.
keywords	Design Cognition , Architectural Modeling , Gestural Inputs , Immersive Environment , Augmented Reality
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2012_314
id	sigradi2012_314
authors	Kotsopoulos, Sotirios; Farina, Carla; Casalegno, Federico
year	2012
title	Designing an Interactive Architectural Element for a Responsive House
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 369-372
summary	This paper presents the features and the reasoning followed in the process of designing a programmable architectural element for a prototype house – a interactive façade involving a matrix of programmable windows. The façade contributes to the precise adjustment of view, airflow, solar radiation, and heat, by allowing the automated modification of the chromatism, the angle and the light transmittance of each individual window.
keywords	Electroactive materials; autonomous control; interactive façade; performance; aesthetics
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2012_391
id	sigradi2012_391
authors	Lopez, Gabriela Bustos
year	2012
title	Ética en la Complejidad del Diseño Arquitectónico con Tecnología Digital (TD): redes multidimensionales colaborativas [Ethics in the Complexity of Architectonic Design with Digital Technology (DT): Multidimensional Collaborative Networks]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 43-46
summary	This article reflects on the ethical implications of digital technology (DT) in architectonic design. Such a reflection is based on the definition of complex epistemology and the educational ethical reform (Morin 2000). The article ends with a conceptual proposal of an interactive, multidimensional and collaborative environment of design. The goal is to re-set patterns and strategies of design with DT from plural perspectives and poly-temporal creations, all of it inserted in a complex ethical point of view of a contemporary design. The wanted result is a social 3d network of design that unifies visualization, modeling tools, videoconferencing, chatting, and social-academic network managing.
keywords	Ethics; Digital Technology (DT); Architectonic Design; Multidimensional Collaborative Networks
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia12_57
id	acadia12_57
authors	Shireen, Naghmi ; Erhan, Halil ; Botta, David ; Woodbury, Robert
year	2012
title	Parallel Development of Parametric Design Models Using Subjunctive Dependency Graphs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 57-66
doi	https://doi.org/10.52842/conf.acadia.2012.057
summary	Exploring problems through multiple alternatives is a key aspect of design. In this paper, we present a prototype system as an extension to existing parametric CAD tools that enables parallel generation and editing of design alternatives. The system is built on two fundamental ideas. First, use of subjunctive dependency graphs enables simultaneous work on multiple design variations. These graphs capture and reveal complex data flow across alternative parametric CAD models. Second, prototype-based modeling provides a weak notion of inheritance enabling incremental description of differences between alternatives. The system is intended to be general enough to be used in different CAD platforms and other systems using graph-based modeling. The three basic system functions are definition of alternatives (variations) using prototype-based modeling, structural and parametric divergences of the prototypes, and interactive comparison. The goal of this research is consistent with the general qualities expected from any creativity support tools: enabling exploration and simultaneous development of variations.
keywords	Parallel editing , Design exploration , Alternatives , Parametric CAD systems , Graph-based modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2012_108
id	sigradi2012_108
authors	Vaz, Carlos Eduardo; Celani, Gabriela
year	2012
title	Gramáticas da forma e modelagem paramétrica – uma aplicação na área da arquitetura paisagística [Shape grammars and parametric modeling – an application in the field of landscape design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 397-400
summary	The objective of the present paper is to propose a design solution database to help students learn basic landscape design concepts and help them apply this new knowledge by using examples developed by an experienced designer. The system is based on an ontology that contains classes of design concepts and design instances. Beyond the structure to search for design concepts and precedents, it’s also proposed an interactive module implemented in a parametric design tool. This module allows students generate and insert automatically different parametric components, such as a group of trees, bushes, sculptures, in a digital model. The system efficacy was verified in a workshop performed with undergraduate students.
keywords	Burle Marx, ontology, parametric modeling
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2012_124
id	ecaade2012_124
authors	Wierzbicki-Neagu, Madalina ; Silva, Clarence Wilfred de
year	2012
title	Application of Fuzzy Logic for Optimizing Foldable Freeform Geometries: An example of a practical application – a foldable window shade
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 709-717.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.709
wos	WOS:000330322400075
summary	This paper concerns the current discourse on computer-aided design tools for architectural design. There are drawbacks of purely analytic design tools which hinder a system-level, end-effect oriented ideation. For instance, most freeform quadrilateral meshes are fully constrained and therefore not capable of folding. They can only fold under special circumstances – when their geometry satisfi es the conditions of over-constrained kinematics. However, such intent of folding cannot be captured using simple modeling based on parameters and constraints. Furthermore, algorithmization of mesh kinematics using formulas is infl exible, it cannot handle topological variations, and it inhibits the interactive control of the model. In this paper, a fuzzy logic algorithm which uses a goal-oriented, human-like reasoning to control the parametric model is proposed. The algorithm applies easily observable behaviors of the geometry to adjust the selected patches until the entire shell can be folded. The algorithm relies on designer-observable characteristics of motion rather than on formulaic representations. Such approach directs the designers’ focus on the desired outcome while avoiding the drawbacks of analytic modeling of complex kinematics.
keywords	Folding structures; fuzzy logic; intent-driven design; freeform quadrilateral mesh
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2012_125
id	caadria2012_125
authors	Hanafin, S.; S. Datta, B. Rolfe, M. Hobbs
year	2012
title	Envelope tesselation with stochastic rotation of 4-fold penttiles
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 253–262
doi	https://doi.org/10.52842/conf.caadria.2012.253
summary	The challenge of developing adaptive, responsive low-energy architecture requires new knowledge about the complex and dynamic interaction between envelope architecture and optimisation between competing environmental performance metrics. Advances in modelling the geometry of building envelopes and control technologies for adaptive buildings now permit the sophisticated evaluation of alternative envelope configurations for a set of performance criteria. This paper reports on a study of the parametric control of a building envelope based on moveable façade components, acting as a shading device to reduce thermal gain within the building. This is investigated using a novel pentagonal tiling strategy considering the component design, tessellation and control methods.
keywords	Responsive envelopes; moveable façade components; parametric modelling; tiling geometry; stochastic rotation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac201210409
id	ijac201210409
authors	Dutt, Florina; Subhajit Das
year	2012
title	Computational Design of a Bio Inspired Responsive Architectural Façade System
source	International Journal of Architectural Computing vol. 10 - no. 4, 613-633
summary	This research intends to illustrate a nonlinear relationship that could be drawn between the fundamental processes in living systems and architectural design of responsive surface.The research focuses on deriving a set of parametric relationships from the phenomenon in cell biology and generating an architectural expression of a responsive fac_ade system.The research methods primarily investigates the cell – to – cell connection in mammary epithelial cell system and review the evident relay of communication across the entire system of cells .This thorough investigation unfolds the logical parameters of the biological system that delineates the dynamic feedback mechanism and changes in the cell surface conditions initiated from the changes in the extra - cellular environment (ECM).The research findings of this complex mechanism are further translated though parametric modeling tool (in this case Generative Components) to model the causalities of the changes in cell environment and surface condition changes. In the next phase of our research we have explored the architectural utility of this hybridized model operating in a user defined controlled environ, and not just a mere response to biological stimulus.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
wos	WOS:000330320600044
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2012_130
id	ecaade2012_130
authors	Beirão, José ; Arrobas, Pedro ; Duarte, José
year	2012
title	Parametric Urban Design: Joining morphology and urban indicators in a single interactive model
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.167-175
doi	https://doi.org/10.52842/conf.ecaade.2012.1.167
wos	WOS:000330322400016
summary	A parametric urban design system integrating GIS data in a CAD environment is proposed as a platform for discussing urban plans providing flexibility and information access in an interactive fashion. The proposed system links calculations of urban indicators with the parameter manipulation of the layout geometry, therefore allowing for a systematic update of indicators according to design modifi cations. Hence, design may be fine-tuned in an informed manner enhancing the quality of design decisions.
keywords	Parametric urban design; density studies; design methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	sigradi2012_106
id	sigradi2012_106
authors	da Silva, Moisés Ribeiro; Spitz, Rejane
year	2012
title	Visualização de Informação e Retórica Visual no Jornalismo Digital [Information Visualization and Visual Rhetoric on Digital Journalism]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 200-203
summary	This paper investigates the Design domain especially on information visualization production to digital media through journalism, focusing on images’ visual rhetoric and aiming at contributing to an initial global debate in view of the contemporary technologic scenario characterized by multimediality and growing popularity of interactive, portable computational devices. For that, it presents the transition between old and new media, the impact on journalism and on information visualization production by new media. It proposes a conscious and organized use of visual rhetoric for designers, with a taxonomy based on earlier researches, and analyses some case studies of information visualization produced by Brazilian and international media companies.
keywords	Visualização de informação; jornalismo digital; retórica visual; design de informação; novas mídias
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_429
id	acadia12_429
authors	Fox, Michael ; Polancic, Allyn
year	2012
title	Conventions of Control: A Catalog of Gestures for Remotely Interacting With Dynamic Architectural Space
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 429-438
doi	https://doi.org/10.52842/conf.acadia.2012.429
summary	The intent of this project is to create a catalogue of gestures for remotely controlling dynamic architectural space. This research takes an essential first step towards facilitating the field of architecture in playing a role in developing an agenda for control. The process of the project includes a sequence carried out in four stages: 1) Research of gestural control 2) Creating an initial catalogue of spatial architectural gestures 3) Real-world testing and evaluation and 4) Refining the spatial architectural gestures. In creating a vocabulary for controlling dynamic architectural environments, the research builds upon the current state-of-the-art of gestural control which exists in integrated touch- and gesture-based languages of mobile and media interfaces. The next step was to outline architecturally specific dynamic situational activities as a means to explicitly understand the potential to build gestural control into systems that make up architectural space. A proposed vocabulary was then built upon the cross-referenced validity of existing intuitive gestural languages as applied to architectural situations. The proposed gestural vocabulary was then tested against user-generated gestures in the following areas: frequency of "invention", learnability, memorability, performability, efficiency, and opportunity for error. The means of testing was carried out through a test-cell environment with numerous kinetic architectural elements and a Microsoft Kinect Sensor to track gestures of the test subjects. We conclude that the manipulation of physical building components and physical space itself is more suited to gestural physical manipulation by its users instead of control via device, speech, cognition, or other. In the future it will be possible, if not commonplace to embed architecture with interfaces to allow users to interact with their environments and we believe that gestural language is the most powerful means control through enabling real physical interactions.
keywords	Gesture , Interactive , Remote , Control , Architecture , Intuition , Physical , Interface
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	sigradi2012_377
id	sigradi2012_377
authors	Jerez, Felipe; Narbona, Paloma; Valenzuela, Nicolás
year	2012
title	Ventajas y desventajas de pizarra interactiva de bajo costo en comparación a otros dispositivos de interfaz humana, enfocado al sketching y planificación de diseño [Advantages and disadvantages of Low-cost-infrared-interactive-whiteboard in comparison to other devices of human interface, focused to sketching and planning of design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 196-199
summary	This research tends to adapt and apply a evaluative analysis method, refered to Human Interface Devices in the area of computer assisted design (CAD). For this evaluation, user based experiences will be developed, where digital sketching task will be done, using HID devices as Mouse, Wacom tablet and Low-cost-infrared-interactive-whiteboard developed by Johnny Chung Lee (WiiMote Whiteboard). Goal is to determine comparative benefits and downsides between this HID devices in digital sketching.
keywords	Pizarra interactiva de bajo coste; Dispositivos de Interfaz Humana HID; Interacción Humano – Computador HCI; Bocetaje digital
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2012_031
id	caadria2012_031
authors	Ji, Guohua; Ying Xu and Ying Wang
year	2012
title	3D urban space information system: A preliminary prototype based on Google Earth plugin
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 359–368
doi	https://doi.org/10.52842/conf.caadria.2012.359
summary	2D GIS has shown its limitations in many situations, especially when it’s applied in urban design. Many studies have been carried out to deal with the problem. Some attempted to link 3D visualisation to data stored within 2D GIS, and others tried to combine GIS, CAD and visualisation together. They all aim to meliorate current GIS for 3D applications. The authors of this paper developed a preliminary prototype of a 3D urban space information system based on Google Earth Plugin. It sets up a server to store and offer specific urban space information. With the desktop application that embeds Google Earth Plugin, user can upload and download models on the server, view them in the virtual 3D environment of Google earth, and make models directly in the 3D environment. A server-side database plays the role of managing information. This paper introduces the key ideas and methods of the system development, including system structure, set-up of the serve, server side information management, and interactive modelling functions.
keywords	GIS; urban design; Google Earth plugin; VB.Net
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_117
id	ecaade2012_117
authors	Kurilla, Lukas ; Ruzicka, Marek ; Florián, Milos
year	2012
title	Architectural software tool for structural analysis (ATSA) intended for intuitive form-fi nding process
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 547-553
doi	https://doi.org/10.52842/conf.ecaade.2012.1.547
wos	WOS:000330322400056
summary	This paper presents Architectural software Tool for Structural Analysis (ATSA) which is designed as a software bridge between architectural and structural software programmes. It has been developed at university in cooperation with architects and structural engineers, intended to make their interdisciplinary cooperation more efficient. ATSA is aimed to provide structural analysis of drafts created by an architetct in the early stages of design in order to enable the architect to understand the mechanical responses of the structure to loading, and thus optimise it creatively through an intuitive form-finding process.
keywords	Design tool development; interactive structural analysis; architect-engineer collaboration; intuitive form-finding;generative design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_95
id	ecaade2012_95
authors	Ladurner, Georg; Gabler, Markus; Menges, Achim; Knippers, Jan
year	2012
title	Interactive Form-Finding for Biomimetic Fibre Structures: Development of a Computational Design Tool and Physical Fabrication Technique Based on the Biological Structure of the Lichen
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 519-529
doi	https://doi.org/10.52842/conf.ecaade.2012.2.519
wos	WOS:000330320600055
summary	This contribution shows a biomimetic approach to design and produce fibrous structural elements derived from the morphology of the biologic archetype ‘the lichen’. The physical form fi nding strategy allows for a novel self-organised reinforcement for fibrous composite systems. A computational design tool has been developed, based on the fi ndings of various physical models. The digital device allows for shape control and therefore an interaction to and manipulation of the fabrication process. Since the form fi nding algorithms of the tool are based on physical experiments,every geometry is derived through the program and has its counterpart in production. For example: the fibre density in the model can be adjusted which leads to different geometries. In production the chosen denseness is utilised, thus, the production yields automatically to the desired load-optimized geometry found in the form-finding tool.
keywords	Biomimetics; Form-finding; Self-organization; Emergence; Fibre structures
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: