Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 32

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2019_204
id	caadria2019_204
authors	Calixto, Victor, Gu, Ning and Celani, Gabriela
year	2019
title	A Critical Framework of Smart Cities Development
doi	https://doi.org/10.52842/conf.caadria.2019.2.685
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 685-694
summary	This paper investigates through a review of the current literature on smart cities, reflecting different concepts across different political-social contexts, seeking to contribute to the establishment of a critical framework for smart cities development. The present work provides a review of the literature of 250 selected publications from four databases (Scielo, ScienceDirect, worldwide science, and Cumincad), covering the years from 2012 to 2018. Publications were categorised by the following steps: 3RC framework proposed by Kummitha and Crutzen (2017), the main political sectors of city planning, implementation strategies, computational techniques, and organisation rules. The information was analised graphically trying to identify tendencies along the time, and also, seeking to explore future possibilities for implementations in different political-social contexts. As a case of study, Australia and Brazil were compared using the proposed framework.
keywords	smart city; smart cities; literature review
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_004
id	caadria2012_004
authors	Chien, S. F. and H. J. Wang
year	2012
title	A support system for integrating smart technologies into existing buildings
doi	https://doi.org/10.52842/conf.caadria.2012.445
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 445–454
summary	We propose a support system for infill elements that integrate smart technologies based on Open Building principles. The design requirements were collected from design practitioners. It consists of an architectural sub-system and an information sub-system. A working prototype was constructed and some smart infill components were implemented to demonstrate and examine the system design. The prototype was evaluated by design practitioners.
keywords	Support system; smart house; open building; building renovation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	75d6
id	75d6
authors	Derix, C and Gamlesaeter, A
year	2012
title	Behavioural Prototypes In Spatial Design Computation
source	In Petruschat and Adenauer (eds), Neue Formen des Prototypings in Gestaltungsprozessen, Form+Zweck, Berlin, 2012
summary	Architects by profession, Christian Derix and Asmund Gamlesæter are interested in expanding the capabilities of digital technology to inform, support and enrich the design process in architecture and spatial planning. The computational prototypes they develop range from form studies to visualization of complex processes in spatial planning such as movement behaviors of people in a city. They work analytically as well as generatively and the approach is deeply affected by the understanding that computing systems should not define solutions but offer creative freedom and create a symbiosis between the designer and the algorithmic intelligence. They are rather designed to help the designer view the design problem and consequences of decisions from different perspectives. Encouraging the designer to play through different narratives. They are rather tools for thinking through multiple solutions and allow the designer to play with the possibilities. The generation of the final design is inspired and validated by the tools but remains in the hands of the designer.
keywords	algorithmic behaviour, design evolution, computational design
series	book
type	normal paper
email
more	http://www.formundzweck.de/de/buecher/prototype-physical-virtual-hybrid-smart/beschreibung.html
last changed	2012/09/20 14:12

_id	sigradi2012_155
id	sigradi2012_155
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Pluripotent Structures: An Exploration into Digital Design & Fabrication by Bio Mimicry
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 665-668
summary	This project is an exploration into the design & fabrication process of a canopy structure derived from the notion of pluripotency. The term is widely used in the context of stem cells in biological science where pluripotency is referred to the potential of a stem cell to develop into more than one type of mature cell, depending on environment. These can be re-interpreted architecturally as, the quality of design components or elements to be radically transformed into one or more different kinds of components, keeping the general structural integrity of the design unchanged (Kolatan, 2009). Consequently, the pluripotent canopy design is a 3 dimensional double curved surface , having smart pluripotent components populated over its domain, which parametrically has the potential to be transformed to more than one different kinds of elements, keeping the same parameters of construction for each component.
keywords	Stem Cell Concept; Pluripotency in Nature; Digital Prototyping; Voronoi Geometry
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2012_65
id	sigradi2012_65
authors	Garagnani, Simone; Mingucci, Roberto; Luciani, Stefano Cinti
year	2012
title	Collaborative design for existing architecture: the Building Information Modeling as a frontier for coordinated process
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 96-100
summary	Building Information Modeling (BIM) has been considered as an emerging collaborative strategy since its introduction, meant for AEC industry and heading to benefits in terms of costs and design quality during the whole building lifecycle. BIM approach, originally developed for new projects, can be successfully applied to existing contexts using TLS surveys to collect point clouds and turn them later into smart digital models, taking advantage of new technologies and methods. This paper addresses these themes paying attention to issues and opportunities, considering BIM as a paramount tool to collect and manage data destined to multiple disciplines
keywords	BIM; laser scanner; AEC digital tools; architectural modeling; collaborative design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2012_83
id	ecaade2012_83
authors	Jones, Paulo; Eloy, Sara; Ricardo, Rui; Dias, Miguel Sales
year	2012
title	Architectural Rehabilitation and Conservation Processes Informed by Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2012.2.411
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 411-418
wos	WOS:000330320600043
summary	The goal of the presented research is to explore human-machine interaction and to study how Augmented Reality (AR) may be a potential tool to inform Architectural Rehabilitation and Conservation processes. Nowadays obtaining data to inform both marchitecture projects and real estate investments is a very bureaucratic process. City councils technicians suffers from the same diffi culties when are in fi eldwork to do inspections and lack a complete sort of information. This proposal considers that the use of mobile technologies as smart phones and tablets can empower these technicians to obtain building related data. The specifi c goal of the study aims to develop a data model and an interface that can be made available to professionals which allows an efficiently reply to the user’s needs as the system enables the gathering of updated information considering a particular building.
keywords	Augmented reality; interface; architecture; rehabilitation; data
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia12_277
id	acadia12_277
authors	Kelley, Thomas ; Blankenbaker, Sarah
year	2012
title	Smart Disassembly: Or, How I Learned to Take Things Apart"
doi	https://doi.org/10.52842/conf.acadia.2012.277
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 277-283
summary	Taking things apart is easy. How something works, or even what it is, is irrelevant to its dismantling. If assembly can be perceived as a rational act, then disassembly is certainly its counterpart: an intuitive, foolproof, and mindless errand of the seemingly curious subject. It is in this unflattering description, however, that disassembly warrants an analysis of its smart potential Smart Disassemblies locates the exploded view drawing, a representation that conveys the instructions for assembly, within its architectural legacy, from its origins in the Renaissance to its more contemporary appropriation by Thom Mayne and Daniel Libeskind. The categorical rules, and the part-to-whole relationships they imply, gleaned from these precedents are then subverted toward the end of disassembling an object. The proposed rule sets (Point of Explosion, Point of View, and Explosion Sequence) and their variants are tested through their application to a complex assembly of objects, a jazz quintet.
keywords	part-to-whole , smart assembly , synthetic tectonics
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
doi	https://doi.org/10.52842/conf.acadia.2013.137
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	acadia12_97
id	acadia12_97
authors	Lilley, Brian ; Hudson, Roland ; Plucknett, Kevin ; Macdonald, Rory ; Cheng, Nancy Yen-Wen ; Nielsen, Stig Anton ; Nouska, Olympia ; Grinbergs, Monika ; Andematten, Stephen ; Baumgardner, Kyle ; Blackman, Clayton ; Kennedy, Matthew ; Chatinthu, Monthira ; Tianchen, Dai ; Sheng-Fu, Chen
year	2012
title	Ceramic Perspiration: Multi-Scalar Development of Ceramic Material
doi	https://doi.org/10.52842/conf.acadia.2012.097
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 97-108
summary	Ceramic building material is a useful passive modulator of the environment. The subject area is based on traditional cultural and material knowledge of clay properties: from amphora to rammed earth building; and ranges to present uses: from desiccants and space shuttle tile patterns to bio-ceramics. The primary consideration is to control material density and porosity in a tile component, in response to specific environmental conditions. This depends on a number of key physical principles: the ability of the material to absorb thermal energy, the ability to absorb and then ‘wick’ moisture within the pore structure, and the decrement factor or ‘time lag’ of the effect. The interplay between these properties point to the importance of directionality in the porous microstructure, at the boundary layer. Material characteristics have been investigated in the laboratory at a micron scale and in the ceramics workshop at full scale, with some interplay between the two. Recent work done on monitoring has led to the development of software tools that allow feedback (approaching real time)- a visual representation of the dynamic thermal and hygrometric properties involved.
keywords	Synthetic tectonics , composite materials , smart assemblies , emerging material processes , Responsive environments , sensing , real-time computation , feedback loops , Information Visualization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ijac201210208
id	ijac201210208
authors	Ochs, Steven W.
year	2012
title	Architectural Sociability as a Strategy to Drive Technology Integrations into Architectural Structures and Smart Environments
source	International Journal of Architectural Computing vol. 10 - no. 2, 301-318
summary	Traditional architectural design fulfills the basic needs of society, but its influence as a system to facilitate personal connection has declined with the growth of telecommunications and social networks.The advance of interactive architecture is now positioning buildings to once again fulfill the role as facilitator of connections and fulfill our personal need of belonging.While current attempts to integrate social communication, technology with built environments are nominally effective; Architectural Sociability is proposed as an effective design solution. Strategy details include a purpose based social approach in which social networks, localized data streams, ubiquitous computing, pervasive networks, and smart environments are considered a traditional part of an architectural structure.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_023
id	ascaad2012_023
authors	Ochs, Steven W.
year	2012
title	Architectural Sociability as a Strategy to Drive Technology Integrations into Architectural Structures and Smart Environments
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 225-240
summary	Traditional architectural design fulfills the basic needs of society, but its influence as a system to facilitate personal connection has declined with the growth of telecommunications and social networks. The advance of interactive architecture is now positioning buildings to once again fulfill the role as facilitator of connections and fulfill our personal need of belonging. While current attempts to integrate social communication, technology with built environments are nominally effective; Architectural Sociability is proposed as an effective design solution. Strategy details include a purpose based social approach in which social networks, localized data streams, ubiquitous computing, pervasive networks, and smart environments are considered a traditional part of an architectural structure.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_023.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_14
id	ecaade2012_14
authors	Ron, Ruth
year	2012
title	Exploration of Eco-Kinetic Systems in Architecture: Development of Dynamic Interactive Building Elements
doi	https://doi.org/10.52842/conf.ecaade.2012.2.391
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 391-399
wos	WOS:000330320600041
summary	This paper explores the potential of smart, moveable building components to achieve customized shading, variable privacy properties, and introduce complex visual qualities. The research combines performative design strategies and sustainable design principles, with parametric modelling and digital fabrication, within the contemporary theoretical and cultural context. The focus of this research is on architecture where physical movement is an integral part of the primary functional and formal nature of the building component. With embedded computing using input and output devices, the systems are no longer static but dynamically move and respond. The paper presents several case studies of working prototypes.
keywords	Kinetic architecture; dynamic architecture; interactive architecture
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_290
id	ecaade2012_290
authors	Barakat, Merate
year	2012
title	Urban Acoustic Simulation: Analysis of Urban Public Spaces through Auditory senses
doi	https://doi.org/10.52842/conf.ecaade.2012.1.587
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 587-592
wos	WOS:000330322400060
summary	This paper explores the sonic characteristics of urban spaces, with the application of apprehending acoustic space and form theory. The theory defines auditory spaces as acoustical arenas, which are spaces defi ned and delineated by sonic events. Historically, cities were built around a soundmark, for example, the resonance of a church bell or propagation of a calling for prayer, or a factory horn. Anyone living beyond the horizon of this soundmark was not considered citizens of that town. Furthermore, the volume of urban sonic arenas depends on natural. Digital simulation is necessary to visualize the ephemeral and temporal nature of sound, within a dynamic immersive environment like urban spaces. This paper digitally analyses the different morphologies of old cities and forms of growth in relation to the sound propagation and ecological effects. An experiment is conducted with the aid of an ancient North-African city model, exposed to a point cloud agent system. By analysing how the sound propagates from the known soundmark through the urban fabric, with the wind pressure interference; the paper compares the theoretical concept of soundmarks and the known perimeter of the ancient city
keywords	Urban Public Spaces; Aural Design; Auditory Arena Simulation; Soundmark
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_326
id	sigradi2012_326
authors	Barros Filho, Mauro Normando Macêdo
year	2012
title	Simulando a dinâmica da segregação urbana: dos autômatos celulares aos modelos baseados em agentes [Simulating urban segregation dynamics: from cellular automata to agent based models]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 453-457
summary	As a consequence of the emergence of models based on the notions of disequilibrium and uncertainty, cities have being seen as intrinsically complex nonlinear systems subject to sociospatial changes that occur, simutaneously, in many scales. The present paper analyzes three models to simulate urban segregation dynamics. Schelling’s model shows how can emerge unexpected highly segregated global patterns from local preferences to live close to each other. Epstein and Axtell’s model reveals its pedagogic role through the manipulation of specific parameters. Portugali’s model emphasizes the cognition and learning capabilities of agents to recognize patterns and change their behaviour accordingly.
keywords	Segregação Urbana; Modelos de Simulação; Autômatos Celulares; Modelos Baseados em Agentes
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
doi	https://doi.org/10.52842/conf.acadia.2012.511
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_016
id	ascaad2012_016
authors	Bourbia, Fatiha ; Yasmina Bouchahm and Ouarda Mansouri
year	2012
title	The Influence of Albedo on the Urban Microclimatic Street Canyon
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 159-169
summary	In city, when temperatures run higher than those in suburban and rural areas, this generate a phenomenon called Urban Heat Island (UHI), this effect occurs, primarily because growing numbers of buildings have supplanted vegetation and trees. The main causes of the different microclimatic conditions in cities are linked among other parameters to urban geometry which influences incoming and outgoing radiations as well as surface material properties, such as color and texture. In hot climates the elevated surface temperatures of materials directly affect, not only the urban microclimate, but also thermal comfort conditions in urban open spaces. In order to evaluate the microclimate variation of urban street canyon compared to the variation of walls and ground surfaces materials, series of field simulation are used by software tool , Envi-met v3.0, in down town of Constantine, Algeria.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_016.pdf
last changed	2012/05/15 20:46

_id	c4bd
id	c4bd
authors	Derix C, Gamlesæter A, Miranda P, Helme L and Kropf K
year	2012
title	Simulation Heuristics for Urban Design
source	In Mueller Arisona et al (eds), Digital Urban Modelling and Simulation: Communications in Computer and Information Science, Springer, Heidelberg, 2012
summary	Designing simulations for urban design not only requires explicit performance criteria of planning standards but a synthesis of implicit design objectives, that we will call ‘purpose rules’, with computational approaches. The former would at most lead to automation of the existing planning processes for speed and evaluation, the latter to an understanding of perceived urban qualities and their effect on the planning of cities. In order to transform purpose rules into encoded principles we argue that the focus should not be on defining parametric constraints and quantities, but on aligning the perceptual properties of the simulations with the strategies of the stakeholders (planner/ urban designer/ architect/ developer/ community). Using projects from the Computational Design and Research group at Aedas [CDR] as examples, this chapter will discuss how an open framework of lightweight applications with simple functionality can be integrated into the design and planning process by using computational simulations as urban design heuristics.
keywords	urban design, design heuristics, meta-heuristics, simulation, algorithm visualization
series	book
type	normal paper
email
more	http://www.springerlink.com/content/g58114676q4228h8/?MUD=MP
last changed	2012/09/20 14:17

For more results click below: