Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_130
id	sigradi2012_130
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Designing Eco Adaptable Residence in a Hot & Humid Climate, in Kolkata, India
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 509-512
summary	The research paper outlines the novel design methodology undertaken to redesign an existing apartment building in Kolkata India. The aim of the research is to significantly improve the design of the individual apartments as well as their spatial arrangement to enhance the indoor comfort level experienced by the inhabitants. The initial in-depth study of the existing design of the apartment building encompasses a short survey of the comfort level experienced by its inhabitants in terms of day lighting, natural ventilation and thermal comfort. The survey revealed the way in which these issues affected the behavioral pattern of the inhabitants in rearranging their spatial needs for the given design conditions. Consequently, the endeavor proposed promised to significantly improve the aforesaid areas of problem & discomfort for the building occupants. At the same time, exploiting contemporary computational simulation tools and digital three-dimensional modeling techniques the project leverages the same to prove the improvements proposed by research data in the form of scientific & mathematical tables and values.
keywords	Sustainable Design; Solar Architecture; Wind Tunnel Test; Eco Adaptable Housing
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2012_147
id	ecaade2012_147
authors	Huang, Yinghsiu; Hsieh, Kai-Wei; Chen, Huan-Nian
year	2012
title	The Emotional Design by Combining Interactive Technologies and Imaginations
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 361-368
doi	https://doi.org/10.52842/conf.ecaade.2012.2.361
wos	WOS:000330320600037
summary	In product design domain, designers have to deal with not only the interface between human and hardware, but also the emotions while using products. However, imagination is an important ability in all design stages. How designers could combine interactive devices and emotions with their imaginations is the main problem of this research. At the end of this paper, the result will demonstrate an interactive and emotional design by combining some sensors to receive the usage from people, and some reactions to express products’ emotions. By wiring photosensitive resistor, pressure sensor, red LED, speakers, and programing in ARDUINO, this study assembled an emotional alarm, which can express his angry emotions by different levels of noise, lighting, and shocking. In this study, we conducted a workshop not only for combining interactive sensors into products, but also for expressing emotions in viewpoints from products. During this workshop, students have to trigger their imaginations for conceiving emotional products, which they have never seen and thought of.
keywords	Imagination; product design; emotional; interactive design; ARDUINO
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2012_229
id	ecaade2012_229
authors	Pihlajaniemi, Henrika; Oesterlund, Toni; Tanska, Tuulikki
year	2012
title	Tools for Interaction and User Participation in Urban Lighting: Lightstories Case
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 677-687
doi	https://doi.org/10.52842/conf.ecaade.2012.2.677
wos	WOS:000330320600073
summary	This proposed paper presents the results of a real world demo of adaptive urban lighting in a pedestrian oriented street in the core centre of a northern city of 65°01’ latitude, Oulu, Finland. The case project – LightStories (Valotarina) – explores the methods to enable city dwellers to participate in the design of public urban lighting, as well as interaction and communication through urban lighting. It applies a web-based design tool which offers city dwellers the possibility to design one hour long light animations to be displayed along a pedestrian oriented street. In addition to describing the design and development process of the lighting system and the participatory design tools used in this case, the paper presents general discussion about the process and tools, and also about the role of algorithm aided methods in enabling the user participation in lighting design with the tool.
keywords	Adaptive urban lighting; user participation; design tool; algorithm aided; real world demo
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia12_333
id	acadia12_333
authors	Poulsen, Esben Skouboe ; Andersen, Hans Jørgen
year	2012
title	Reactive Light Design in the ""Laboratory of the Street"" Esben Skouboe Poulsen, Hans Jørgen Andersen"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 333-342
doi	https://doi.org/10.52842/conf.acadia.2012.333
summary	This paper presents and discusses results related to a full-scale responsive urban lighting experiment and introduces a light design methodology inspired by reactive control strategies in robot systems. The experiment investigates how human motion intensities can be used as input to light design in a reactive system. Using video from 3 thermal cameras and computer vision analysis; people’s flow patterns were monitored and send as input into a reactive light system. Using physical as well as digital models 4 different light scenarios is designed and tested in full-scale. Results show that people on the square did not engage in the changing illumination and often they did not realized that the light changed according to their presence. However from the edge of the square people observed the light patterns “painted” on the city square, as such people became actors on the urban stage, often without knowing. Furthermore did the experiment showcase power savings up to 90% depending on the response strategy.
keywords	Responsive environments , Architectural Lighting , Interaction , Realtime response , Computer vision
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	ijac201210302
id	ijac201210302
authors	Rossi, Dino; Zoltán Nagy, Arno Schlueter
year	2012
title	Adaptive Distributed Robotics for Environmental Performance, Occupant Comfort and Architectural Expression
source	International Journal of Architectural Computing vol. 10 - no. 3, 341-359
summary	The integration of adaptive distributed robotics in architectural design has the potential to improve building energy performance while simultaneously increasing occupant comfort. In addition, conceiving buildings as dynamic systems with the ability to adapt to the changing environments in which they exist, opens new aesthetic possibilities for designers. As the façade of a building is a common place to address issues of energy performance and occupant comfort, this paper presents a first prototype of an adaptive solar envelope (ASE). Its functions are to provide distributed shading, solar power generation through integrated photovoltaics, and daylight distribution. We describe the interdisciplinary design process, and illustrate the architectural possibilities that arise from a distributed systems approach. The ASE is expanded to work in parallel with an adaptive artificial lighting element. Rather than being preprogrammed, the systems adapt their behavior through interaction with the environment and building occupants. This adaptation to the user's wishes is demonstrated successfully for the artificial light controller. We argue that with presently available technology and an increased exposure of architecture students and practitioners to adaptive design techniques, adaptive architectures will soon become a regular element of the built environment.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_275
id	ecaade2012_275
authors	Sharaidin, Kamil; Burry, Jane; Salim, Flora
year	2012
title	Integration of Digital Simulation Tools With Parametric Designs to Evaluate Kinetic Façades for Daylight Performance
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-709
doi	https://doi.org/10.52842/conf.ecaade.2012.2.701
wos	WOS:000330320600075
summary	This research presents a solution for evaluation of kinetic façades system performance via experiences and lessons learnt from experiments. We bridge between architects and engineers to address limitations associated with incorporating performance criteria in the design of kinetic façades by integrating different simulation tools. The experiments focus on optimization of the daylight performance through the design and motion of kinetic façades using various integrated software. The research is developed using real time data feedback processed through various digital tools from three domains: (1) Architectural design, (2) day-lighting performance and (3) parametric design computation. From the evaluations, the paper demonstrates the analysis of kinetic motion for daylight optimization at the early design stage and suggests possible configurations for daylight performance.
keywords	Kinetic façades; digital simulations; design considerations; early design stage
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_131
id	caadria2012_131
authors	Ambrose, Michael A.
year	2012
title	Digital conception(s): Architectural concepts of digital design and making
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 699–708
doi	https://doi.org/10.52842/conf.caadria.2012.699
summary	This paper presents an investigation of probative works of architectural thought and production executed in various forms of digital design and computational media. The applied design research focuses on an examination of the procedure or process constructed to both develop exact, precise digital models and constructed processes that result in design outcomes that cannot be pre-visioned. The changing position of the conceptualisation within the design process continually changes the relationship of the digital work and the computational framework. The work challenges one to interpret design processes of translation and transformation, through the continual oscillation between developed in pursuit of known results and constructed methods for making, in an effort to unravel the pretext of the singular point of view to reveal the intention of the design conception(s). The projects discussed here focus on relationships between the projection of space in architectural representation and the production of architectural form through complex geometries relative to discontinuities and the way in which they agitate and alter one another. DIGITAL conception(s) operate across three primary areas of research; animation, conceptualisation and fabrication. The work oscillates between digital and physical artefacts that intertwine digital/physical workflows while simultaneously engaging temporal issues of time based media through motion graphics and animate constructs.
keywords	Design representation; visualisation; design theory
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
doi	https://doi.org/10.52842/conf.caadria.2012.465
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac201210409
id	ijac201210409
authors	Dutt, Florina; Subhajit Das
year	2012
title	Computational Design of a Bio Inspired Responsive Architectural Façade System
source	International Journal of Architectural Computing vol. 10 - no. 4, 613-633
summary	This research intends to illustrate a nonlinear relationship that could be drawn between the fundamental processes in living systems and architectural design of responsive surface.The research focuses on deriving a set of parametric relationships from the phenomenon in cell biology and generating an architectural expression of a responsive fac_ade system.The research methods primarily investigates the cell – to – cell connection in mammary epithelial cell system and review the evident relay of communication across the entire system of cells .This thorough investigation unfolds the logical parameters of the biological system that delineates the dynamic feedback mechanism and changes in the cell surface conditions initiated from the changes in the extra - cellular environment (ECM).The research findings of this complex mechanism are further translated though parametric modeling tool (in this case Generative Components) to model the causalities of the changes in cell environment and surface condition changes. In the next phase of our research we have explored the architectural utility of this hybridized model operating in a user defined controlled environ, and not just a mere response to biological stimulus.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_296
id	ecaade2012_296
authors	Erhan, Halil I. ; Sanchez, Rodolfo ; Woodbury, Robert F. ; Mueller, Volker
year	2012
title	Visual Narratives of Parametric Design History: Aha! Now I see how you did it!
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 259-268
doi	https://doi.org/10.52842/conf.ecaade.2012.1.259
wos	WOS:000330322400026
summary	Histories are underdeveloped and underused features in parametric CAD (PCAD) systems. Designers employ backtracking and deferral strategies that both use and augment history. Using backtracking and deferral as a framework we present two classes of design process graph diagramming techniques for augmented history in PCAD. We compare the second version of these design process graphs across several designers who completed multiple tasks using two parametric systems (SolidWorks and GenerativeComponents). The two systems show similar types of action, with markedly more and deeper backtracking in GenerativeComponents. We present a third diagramming system as a design for a proof of concept prototype. This prototype aims to expand the capabilities of design histories beyond access to single prior states to visualize and enable direct interaction based on backtracking and deferral.
keywords	Parametric CAD, design history, backtracking, deferral, design space
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_139
id	acadia12_139
authors	Erioli, Alessio ; Zomparelli, Alessandro
year	2012
title	Emergent Reefs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 139-148
doi	https://doi.org/10.52842/conf.acadia.2012.139
summary	The Emergent Reefs project thrives on the potential that emerge from a coherent utilization of the environment’s inherent ecological structure for its own transformation and evolution, using an approach based on digitally simulated ecosystems and sparkled by the possibilities and potential of large-scale 3D printing technology. Considering tourism as an inevitable vector of environmental change, the project aims to direct its potential and economic resources towards a positive transformation, providing a material substrate for the human-marine ecosystem integration with the realization of spaces for an underwater sculpture exhibition. Such structures will also provide a pattern of cavities which, expanding the gradient of microenvironmental conditions, break the existing homogeneity in favor of systemic heterogeneity, providing the spatial and material preconditions for the repopulation of marine biodiversity. Starting from a digital simulation of a synthetic local ecosystem, a generative technique based on multi-agent systems and continuous cellular automata (put into practice from the theoretical premises in Alan Turing’s paper “The Chemical basis of Morphogenesis” through reaction-diffusion simulation) is implemented in a voxel field at several scales giving the project a twofold quality: the implementation of reaction diffusion generative strategy within a non-isotropic 3-dimensional field and integration with the large-scale 3D printing fabrication system patented by D-Shape®. Out of these assumptions and in the intent of exploiting the expressive and tectonic potential of such technology, the project has been tackled exploring voxel-based generative strategies. Working with a discrete lattice eases the simulation of complex systems and processes across multiple scales (including non-linear simulations such as Computational Fluid-Dynamics) starting from local interactions using, for instance, algorithms based on cellular automata, which then can be translated directly to the physical production system. The purpose of Emergent-Reefs is to establish, through strategies based on computational design tools and machine-based fabrication, seamless relationships between three different aspects of the architectural process: generation, simulation and construction, which in the case of the used technology can be specified as guided growth.
keywords	emergence , reef , underwater , 3D printing , ecology , ecosystem , CFD , agency , architecture , tourism , culture , Open Source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2012_240
id	sigradi2012_240
authors	Gonçalves, Marly de Menezes
year	2012
title	O produto como ideia e não como objeto – a metodologia do design [The product as an idea and not as an object - a design methodology]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 281-284
summary	This article will present the content of the discipline of the Interdisciplinary Project, conducted in the 2nd semester of the Interior Design of the Istituto Europe di Design in Sao Paulo by a common theme and across all subjects, develops an interdisciplinary project.
keywords	ensino; interdisciplinaridade; design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2022_297
id	sigradi2022_297
authors	Roco, Miguel
year	2022
title	ePortfolio as a Techno-pedagogical Strategy for Networked Learning in the Architectural Design Studio
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 1075–1086
summary	This paper shows and describes the experience of the ePortfolio implementation in architectural training for promoting Networked Learning (NL). The aim was to analyze the potential of ePortfolio, as a techno-pedagogical strategy to develop and enhance connections and learning integrations among students who belong in the second year of the Architectural Design Studio. The research had a descriptive methodology with a mixed approach over fourteen cohorts of the same training cycle across the years 2012 to 2018, considering a total of 336 students. The results reveal that ePortfolio, conceived inside the techno-pedagogical model, articulates a set of learning connections between students and learning situations and promotes the construction of an active collaboration net, which evidence NL development in the formative process.
keywords	ePortfolio, Networked Learning, ICT, Architectural Teaching, Techno-pedagogy
series	SIGraDi
email
last changed	2023/05/16 16:57

_id	ijac201210207
id	ijac201210207
authors	Salim, Flora D.; Jane R. Burry, Juliette Peers and Jenny Underwood
year	2012
title	Augmented Spatiality
source	International Journal of Architectural Computing vol. 10 - no. 2, 275-300
summary	Designers have long been concerned with new and visionary types of public space.With the advent of ubiquitous computing, architects and designers have become increasingly aware of the opportunities and challenges in designing spaces and everyday objects to support socially- oriented human interactions whether through spatial or technological means.This paper presents a novel transdiscplinary method for designing new interactive architectural prototypes that promote connectivity and social interactions in the public space in order to address specific agendas of urban interventions.The proposed method was evaluated in a pilot studio, in which students across various design and technical disciplines were invited to propose utopian socio- technological visions for a particular site and to develop their ideas into working architectural prototypes that could be installed at the chosen site and tested by the public.The open brief generated various responses and outcomes in eight projects, of which two are discussed in this paper.
series	journal
last changed	2019/05/24 09:55

_id	acadia12_57
id	acadia12_57
authors	Shireen, Naghmi ; Erhan, Halil ; Botta, David ; Woodbury, Robert
year	2012
title	Parallel Development of Parametric Design Models Using Subjunctive Dependency Graphs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 57-66
doi	https://doi.org/10.52842/conf.acadia.2012.057
summary	Exploring problems through multiple alternatives is a key aspect of design. In this paper, we present a prototype system as an extension to existing parametric CAD tools that enables parallel generation and editing of design alternatives. The system is built on two fundamental ideas. First, use of subjunctive dependency graphs enables simultaneous work on multiple design variations. These graphs capture and reveal complex data flow across alternative parametric CAD models. Second, prototype-based modeling provides a weak notion of inheritance enabling incremental description of differences between alternatives. The system is intended to be general enough to be used in different CAD platforms and other systems using graph-based modeling. The three basic system functions are definition of alternatives (variations) using prototype-based modeling, structural and parametric divergences of the prototypes, and interactive comparison. The goal of this research is consistent with the general qualities expected from any creativity support tools: enabling exploration and simultaneous development of variations.
keywords	Parallel editing , Design exploration , Alternatives , Parametric CAD systems , Graph-based modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2012_226
id	ecaade2012_226
authors	Sopeoglou, Eva
year	2012
title	Scripting shadows: Weaving digital and physical environments through design and fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 255-258
doi	https://doi.org/10.52842/conf.ecaade.2012.1.255
wos	WOS:000330322400025
summary	This paper considers the opportunities of engaging in a creative dialogue between the physical and the digital, through the use of generative design tools and digital fabrication technologies. Digital iterations on an open-air installation for a pavilion take the shape of research in design. The design is partly driven by environmental parameters, such as the movement of the sun and shadows across a site in the Mediterranean. A fabricated microclimate is tailored through bespoke scripting and fabrication. In this project, rather than being used to optimise environmental parameters, scripting intents to offer a delightful milieu for human comfort.
keywords	Scripting; digital fabrication; shading; environmental comfort
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201210307
id	ijac201210307
authors	Willmann, Jan; Federico Augugliaro, Thomas Cadalbert, et al.
year	2012
title	Aerial Robotic Construction Towards a New Field of Architectural Research
source	International Journal of Architectural Computing vol. 10 - no. 3, 439-459
summary	This paper takes a first step in characterizing a novel field of architectural research - aerial robotic construction (ARC) - where aerial robotics is used not only for construction, but as a guiding principle in the design and fabrication process. Featuring autonomous flying vehicles that lift small building elements and position them according to a precise digital blueprint, ARC offers a comprehensive new approach to architecture research and technology. Developed by the research groups of Gramazio & Kohler and Raffaello D'Andrea at ETH Zurich, ARC offers unique advantages over traditional approaches to building: it does not require scaffolding, it is easily scalable, and it offers digital integration and informational oversight across the entire design and building process. This paper considers 1) research parameters for the individual components of ARC (such as module design, connection methodologies, vehicle cooperation, and construction sequencing/synchronization), and 2) the architectural implications of integrating these discrete components into a systemic, unifying process at the earliest stages of design. Fidelity between the design concept and the full-scale construction is of particular concern.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
wos	WOS:000330322400002
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_88
id	sigradi2012_88
authors	Borda, Adriane; Pires, Janice; de Vasconselos, Tássia Borges
year	2012
title	O Desenho (didático) para o Insight [Drawing didactic for Insight]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 277-280
summary	Knowledge of geometric drawing, hitherto considered previous in the training context in architecture, has little emphasis in the school curriculum. In the context this work, were recognized approaches such as shape grammar, which explain design practices, unveiling relationships of the geometric form. It was also identified practices of the Gestalt, established under the modern architecture, which sought to stimulate the student to have insights to think about geometric structures implicit in the form. From these references and digital tools, it is demonstrated the types of concepts and some of the exercises that are being used for the configuration of an learning for the insight.
keywords	Geometric drawing, insight, architectural design.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: