Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 98

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_325
id	acadia12_325
authors	Chronis, Angelos ; Tsigkari, Martha ; Davis, Adam ; Aish, Francis
year	2012
title	Design Systems, Ecology, and Time Angelos Chronis, Martha Tsigkari, Adam Davis, Francis Aish"
doi	https://doi.org/10.52842/conf.acadia.2012.325
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 325-332
summary	Discussion of architecture in ecological terms usually focuses on the spatial and material dimensions of design practice. Yet there is an equally critical temporal dimension in ecology that is just as relevant to design. At the micro scale is the question of 'real time' feedback from our design systems. At the macro scale is the issue of sustainability, in other words long term -- and potentially disastrous -- feedback from terrestrial ecosystems. In between are numerous different units for quantizing time in design and computation. In this paper, we examine some of these units -- 'real time', 'design time', 'development time' -- to suggest how they interact with the ecology of design technology and practice. We contextualize this discussion by reference to relevant literature from the field of ecology and to our work applying custom design and analysis tools on architectural projects within a large interdisciplinary design practice.
keywords	real time feedback , performance driven design , integration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_109
id	acadia12_109
authors	Comodromos, Demetrios A ; Ellinger, Jefferson
year	2012
title	Material Intensities
doi	https://doi.org/10.52842/conf.acadia.2012.109
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 109-113
summary	As host organizers of the Smartgeometry 2012 Conference, professors of Architecture, and as principals in design firms, our work aims to use as a productive resistance the notion of Material Intensity described below as both a foil and measure to current concepts of simulation and intensive modeling in architectural computation. The holding of SG 2012 aimed to stage this resistance in the form of workshop, round-table discussions, lectures and symposia, with the outcome attempting to define a new synthetic notion of material intensities in modes of architectural production. This paper aims to form the basis of a continued exploration and development of this work. In summary we focused on: 1-Intensive thinking as derived from the material sciences as an actual and philosophical framework that emphasizes qualitative attributes, which is likened to behavior, simulation, and dynamic modeling. Extensive attributes lead to analytical, representational and static modeling. 2-Material practices can also be formed and as a result of this method of thinking. As demonstrated by the glasswork of Evan Douglis, ‘paintings’ by Perry Hall—the managed complexity possible by working with materials during intensive states of change allow for scalar, morphological and performative shifts according to a designer’s criteria. 3- Although both are necessary and actually complement each other, architects need to ‘catch-up’ to intensive thinking in process and modeling strategies. Our methods rely on static modeling that yield often complicated frameworks and results, wherein accepting methods of dynamic modeling suggests the capacity to propose complex and nuanced relationships and frameworks.
keywords	Material Intensities , Intensive Thinking , Material Practice
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:56

_id	acadia23_v3_115
id	acadia23_v3_115
authors	Dade-Robertson, Martyn
year	2023
title	Designing with Agential Matter
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	There have been, very broadly, three eras in the understanding of matter in design. The first, associated with an Aristotelian view of matter as inert and as a receptacle of form, has dominated many of the formalisms in Architectural Design from the Renaissance through to Modernism. The second, sometimes described as “new materialism” (Menges 2012), considers matter as active through design processes which work with materials’ inherent tendencies and capacities. This has led to now-familiar design methods, including Material Based Design Computation (Oxman 2009), and many experiments with active materials such as bilayer metals and hygromorphs. These materials can be programmed to respond to their environments and often take inspiration from biology. I want to suggest that we are entering a new era of understanding matter, which I refer to as the “agential era.”
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

_id	ecaade2012_60
id	ecaade2012_60
authors	Dierichs, Karola; Menges Achim
year	2012
title	Material and Machine Computation of Designed Granular Matter: Rigid-Body Dynamics Simulations as a Design Tool for Robotically-Poured Aggregate Structures Consisting of Polygonal Concave Particles
doi	https://doi.org/10.52842/conf.ecaade.2012.2.711
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 711-719
summary	Loose granulates are a relevant yet rarely deployed architectural material system. Their significance lies in their capacity to combine fluid-like amorphousness with solid-like rigidity, resulting in potential architectural structures capable of continuous reconfi guration. In addition aggregates allow for functional grading. Especially if custom designed concave particles are used, full-scale architectural structures can be poured using a six-axis industrial robot, combining the precise travel of the emitter-head with the self-organizational capacity of granular substances. In this context, the paper proposes Rigid-Body Dynamics (RBD) simulations as a design-tool for the robotic pouring of loose granular structures. The notions of material and machine computation are introduced and RBD is explained in greater detail. A set of small tests is conducted to investigate the advantages and disadvantages of a specifi c RBD software. Conclusively, further areas of research are outlined.
wos	WOS:000330320600076
keywords	Material and machine computation; aggregate architectures; designed granulates; robotic pouring; Rigid-Body Dynamics
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_97
id	acadia12_97
authors	Lilley, Brian ; Hudson, Roland ; Plucknett, Kevin ; Macdonald, Rory ; Cheng, Nancy Yen-Wen ; Nielsen, Stig Anton ; Nouska, Olympia ; Grinbergs, Monika ; Andematten, Stephen ; Baumgardner, Kyle ; Blackman, Clayton ; Kennedy, Matthew ; Chatinthu, Monthira ; Tianchen, Dai ; Sheng-Fu, Chen
year	2012
title	Ceramic Perspiration: Multi-Scalar Development of Ceramic Material
doi	https://doi.org/10.52842/conf.acadia.2012.097
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 97-108
summary	Ceramic building material is a useful passive modulator of the environment. The subject area is based on traditional cultural and material knowledge of clay properties: from amphora to rammed earth building; and ranges to present uses: from desiccants and space shuttle tile patterns to bio-ceramics. The primary consideration is to control material density and porosity in a tile component, in response to specific environmental conditions. This depends on a number of key physical principles: the ability of the material to absorb thermal energy, the ability to absorb and then ‘wick’ moisture within the pore structure, and the decrement factor or ‘time lag’ of the effect. The interplay between these properties point to the importance of directionality in the porous microstructure, at the boundary layer. Material characteristics have been investigated in the laboratory at a micron scale and in the ceramics workshop at full scale, with some interplay between the two. Recent work done on monitoring has led to the development of software tools that allow feedback (approaching real time)- a visual representation of the dynamic thermal and hygrometric properties involved.
keywords	Synthetic tectonics , composite materials , smart assemblies , emerging material processes , Responsive environments , sensing , real-time computation , feedback loops , Information Visualization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	acadia12_287
id	acadia12_287
authors	McGee, Wes ; Newell, Catie ; Willette, Aaron
year	2012
title	Glass Cast: A Reconfigurable Tooling System for Free-Form Glass Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2012.287
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 287-294
summary	Despite glass’s ubiquity in the modern built environment it is rarely applied in applications requiring complex curvature. The high temperatures and complexity of techniques utilized in forming curved glass panels are typically very expensive to employ, requiring dedicated hard-tooling which ultimately limits the formal variation that can be achieved. This combination of economic and manufacturing barriers limits both the formal possibilities and potentially the overall envelope-performance characteristics of the glazing system. This research investigates a methodology for utilizing reconfigurable tooling to form glass into doubly curved geometries, offering the potential for improved structural and environmental performance in a material that has remained largely unchanged since the advent of its industrial manufacturing. A custom built forming kiln has been developed and tested, integrated through a parametric modeling workflow to provide manufacturing constraint feedback directly into the design process. The research also investigates the post-form trimming of glass utilizing robotic abrasive waterjet cutting, allowing for the output of machine control data directly from the digital model. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Digital Fabrication , Robotic Fabrication , Computational Design , Material Computation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia12_21
id	acadia12_21
authors	Menges, Achim
year	2012
title	Material Generation: Materiality and Materialisation as Active Drivers in Design Computation
doi	https://doi.org/10.52842/conf.acadia.2012.021
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 21-24
series	ACADIA
type	keynote paper
last changed	2022/06/07 07:58

_id	ecaade2013_128
id	ecaade2013_128
authors	Symeonidou, Ioanna; Hirschberg, Urs and Kaftan, Martin
year	2013
title	Designing the Negative
doi	https://doi.org/10.52842/conf.ecaade.2013.1.683
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 683-691
summary	Designing the Negative was the title of a Master Studio that took place at the Institute of Architecture and Media of Graz University of Technology during the summer semester of 2012. Students designed and fabricated prototypes of customized concrete formwork as part of their studio assignment. The studio theme forced students to think about digital fabrication with parametric tools in a hands-on fashion. Using robotic technology and hot-wire cutting, students worked with the robot’s constraints (size of the robot’s arm, robot’s axis and tool’s restrictions) to design complex curved elements that could serve as formwork (the negative) for cast concrete elements (the positive). The students were asked to design a production strategy for their cast concrete elements as well as the application of said elements in an architectural scheme. The student projects confirmed the value of a pedagogy that takes on research-relevant questions in an interdisciplinary studio setting and engages students in a process that is best described as digital crafting: it simultaneously addressed the conceptual and technical as well as the material and tactile aspects of digital fabrication and design.
wos	WOS:000340635300071
keywords	Digital fabrication; customization; concrete; hot-wire cutting; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2012_186
id	sigradi2012_186
authors	Aghaei Meibodi, Mania; Aghaiemeybodi, Hamia
year	2012
title	Symbiosis of Structural & Non-Structural properties in Building
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 602-606
summary	This paper highlights the different interplays between structural and non-structural parts in building artifact as the result of modes of building processes and massing. The massing is understood as processes of assembling material into a body through which we identify with the building physically. In the last decade architecture discipline as the result of technological inventions has faced shifts in the design processes, massing processes and topology of the artefact. In which we witness integral coexistence between the structural and non-structural elements of building. In this paper the seeds of this integral interplay is scrutinised through the study of design and massing processes of a multi-functional pavilion prototype as a case study.
keywords	digital surface; prototype; design processes; structural; formation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
wos	WOS:000330320600047
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
wos	WOS:000330320600014
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
doi	https://doi.org/10.52842/conf.caadria.2012.183
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
doi	https://doi.org/10.52842/conf.caadria.2012.527
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_149
id	acadia12_149
authors	Besler, Erin
year	2012
title	Low Fidelity
doi	https://doi.org/10.52842/conf.acadia.2012.149
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 149-153
summary	Low Fidelity engages in the translational discrepancies that occur through mediums of architectural representation, not as instances of dilemma but as opportunities to subdue tautology and augment the seductive latency of representation(1). Where some might contend the discrepant as unlawful, the methodology that this thesis argues for engages the digital and machinic, and explores the translational discrepancies that challenge and interrupt our interface with matters of materialization and excite material propensities. The discrepant becomes a dynamic catalyst through the engagement of tools and techniques that subvert the homogeneity of digital design. Low Fidelity engages the sphere of translation by reevaluating the role of architectural representation as generator and generated its originations and its limitations. In an attempt to negotiate the digital and physical, this thesis situates itself within the feedback loop between the mediums of translation through ideas their formal logics, material propensities and back again.
keywords	Robotic Fabrication , Digital Machinic , Material Propensity , Technological Fidelity , Generative Representation , Translation through Mediums
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

For more results click below: