Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 534

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	acadia12_457
id	acadia12_457
authors	Shook, David ; Sarkisian, Mark
year	2012
title	Weighted Metrics: Synthesizing Elements for Tall Building Design
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 457-466
doi	https://doi.org/10.52842/conf.acadia.2012.457
summary	Salient attributes of previously designed projects can be examined to understand how key parameters could inform current design practices. These parameters include gross floor area, number of stories, occupancy, material type, geographic location, seismicity, climatic influences, etc. Two informative analysis tools for intelligent design have been developed which can be used from preliminary planning stages to the final design of individual structures to district-wide developments. These tools can evaluate concurrent influences of these parameters on the built environment. The first is the Environmental Analysis Tool™ (EA Tool). The EA Tool quantifies the estimated equivalent carbon dioxide emissions of structural components. The second analysis tool is Parametric City Modeling (PCM). PCM estimates the usable area of a tower by estimating net floor area. These tools can also be applied to multiple buildings at a district scale to facilitate a new level of design in urban planning efforts. Design information embodied in the physical built environment finds new purpose in the informative prediction of performance at the on-set of digital design. Harvesting and mining data as a natural resource brings new potential to informed design. These concepts and subsequent tools are vital to building sustainable and efficient cities of the future.
keywords	Data Harvesting , Sustainability , Building Efficiency , Urban Planning , Parametric Design , Optimization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
doi	https://doi.org/10.52842/conf.acadia.2012.511
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_284
id	sigradi2012_284
authors	Brakke, Aaron Paul; Velasco, Rodrigo
year	2012
title	Eco-envelopes: An Environmental Approach to Parametric Design
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 517-521
summary	The development of the digital discourse in the field of architecture has been a principle concern at the beginning of the 21st century. Attempts at developing methodologies for the utilization of digital tools in the design process have been present for decades. In the past decade that interest has been augmented by a stance that aims to emphasize the use of generative tools that can facilitate an iterative systems approach to design. This article illustrates how a parametric modeling process has been applied in the design and dimensioning of brise soleil double facade systems.
keywords	Digital Discourse; Parametric Modeling; Design Process; Environmental; Brise Soleil
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
doi	https://doi.org/10.52842/conf.acadia.2012.127
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_372
id	sigradi2012_372
authors	Carvalho, Guilherme; Araújo, André Luís; Barbosa, Wilson; Noritomi, Pedro; Oliveira, Marcelo; Celani, Gabriela
year	2012
title	Avaliação Comparativa de Aplicativos de Análise Estrutural Vinculados ao Ambiente de Modelagem Paramétrica: estudo de caso utilizando o plug-in Scan-and-Solve para Rhinoceros [Comparative between software for structural analysis linked to parametric modeling environment: case study with the plug-in Scan-and-Solve for Rhinoceros]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 348-351
summary	This paper evaluates the use of Scan-and-Solve plug-in for structural analysis in Rhinoceros’s environment. A reception desk parametrically modeled was evaluated with Scan-and-Solve and with Ansys. From the results, we concluded that the main difference between the programs is that Ansys allows more detailed definition of the connections between parts of the object. Besides the virtual models, the results were showed with a physical model printed with the rapid prototypes techniques. The paper describes the integration of parametric modeling, structural analysis and rapid prototyping procedures in the design process.
keywords	Finite elements, Structural analysis, Scan-and-Solve; Ansys; Rapid prototyping
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	acadia12_109
id	acadia12_109
authors	Comodromos, Demetrios A ; Ellinger, Jefferson
year	2012
title	Material Intensities
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 109-113
doi	https://doi.org/10.52842/conf.acadia.2012.109
summary	As host organizers of the Smartgeometry 2012 Conference, professors of Architecture, and as principals in design firms, our work aims to use as a productive resistance the notion of Material Intensity described below as both a foil and measure to current concepts of simulation and intensive modeling in architectural computation. The holding of SG 2012 aimed to stage this resistance in the form of workshop, round-table discussions, lectures and symposia, with the outcome attempting to define a new synthetic notion of material intensities in modes of architectural production. This paper aims to form the basis of a continued exploration and development of this work. In summary we focused on: 1-Intensive thinking as derived from the material sciences as an actual and philosophical framework that emphasizes qualitative attributes, which is likened to behavior, simulation, and dynamic modeling. Extensive attributes lead to analytical, representational and static modeling. 2-Material practices can also be formed and as a result of this method of thinking. As demonstrated by the glasswork of Evan Douglis, ‘paintings’ by Perry Hall—the managed complexity possible by working with materials during intensive states of change allow for scalar, morphological and performative shifts according to a designer’s criteria. 3- Although both are necessary and actually complement each other, architects need to ‘catch-up’ to intensive thinking in process and modeling strategies. Our methods rely on static modeling that yield often complicated frameworks and results, wherein accepting methods of dynamic modeling suggests the capacity to propose complex and nuanced relationships and frameworks.
keywords	Material Intensities , Intensive Thinking , Material Practice
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:56

_id	sigradi2012_221
id	sigradi2012_221
authors	de Menezes, Alexandre Monteiro; Pontes, Mateus Moreira
year	2012
title	BIM e o ensino: possibilidades na instrumentação e no projeto [BIM and education: possibilities in instrumentation and project]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 226-228
summary	This article discusses the relationship between instrumentation for the architectural design, in particular the teaching of drawing, and current conditions of representation, based on digital tools, specially with the use of softwares for Building Information Modeling (BIM). It presents the difficulties of teaching architectural design today and proposes an alternative comprehension of priorities, based on understanding of architectural elements as a reference for learning. After this, it discusses the potential of this technique for teaching construction of a more comprehensive way and presents a multimedia material for developing this task.
keywords	BIM, ensino, representação arquitetônica
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2012_130
id	sigradi2012_130
authors	Dutt, Florina; Das, Subhajit
year	2012
title	Designing Eco Adaptable Residence in a Hot & Humid Climate, in Kolkata, India
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 509-512
summary	The research paper outlines the novel design methodology undertaken to redesign an existing apartment building in Kolkata India. The aim of the research is to significantly improve the design of the individual apartments as well as their spatial arrangement to enhance the indoor comfort level experienced by the inhabitants. The initial in-depth study of the existing design of the apartment building encompasses a short survey of the comfort level experienced by its inhabitants in terms of day lighting, natural ventilation and thermal comfort. The survey revealed the way in which these issues affected the behavioral pattern of the inhabitants in rearranging their spatial needs for the given design conditions. Consequently, the endeavor proposed promised to significantly improve the aforesaid areas of problem & discomfort for the building occupants. At the same time, exploiting contemporary computational simulation tools and digital three-dimensional modeling techniques the project leverages the same to prove the improvements proposed by research data in the form of scientific & mathematical tables and values.
keywords	Sustainable Design; Solar Architecture; Wind Tunnel Test; Eco Adaptable Housing
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia12_37
id	acadia12_37
authors	Fagerström, Gustav ; Hoppermann, Marc ; Almeida, Nuno ; Zangerl, Martin ; Rocchetti, Stefano ; Van Berkel, Ben
year	2012
title	Softbim: An Open Ended Building Information Model in Design Practice
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 37-46
doi	https://doi.org/10.52842/conf.acadia.2012.037
summary	In this paper we present examples from architectural practice in which our definition of the softBIM method has been used to some extent. We discuss its advantages and disadvantages in relation to its use in early project phases. The goal of this study is to propose an integrative, schematic and open-ended model for dealing with complex assemblies of geometric and non-geometric project data, aiming to remain non-reliant on specific software packages.
keywords	BIM , Building Information Modeling , Attributes , Metadata , Early phases design , Open source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2012_181
id	sigradi2012_181
authors	Florio, Wilson
year	2012
title	Protótipo rápido de elementos construtivos produzidos pela tecnologia de sinterização seletiva a laser [Rapid prototyping of constructive elements produced by the technology of selective laser sintering]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 669-672
summary	The aim of this paper is to examine the physical models of constructive elements from the use of technology of selective laser sintering (SLS). The main stages in the production of rapid prototyping (PRs) were as follows: 1. Parametric Modeling (MP); 2. Geometric modeling; 3. Preparation of geometric model; 4. Execution of PR. This research contributes to debate on parametric modeling (MP) and the fabrication of very delicate physical models by technology SLS, particularly for purposes of viewing and technical evaluation during the design process in architecture.
keywords	Modelagem geométrica; Prototipagem Rápida; SLS; Processo de Projeto; Modelagem Paramétrica
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia12_67
id	acadia12_67
authors	Gerber, Dr. David Jason ; Lin, Shih-Hsin
year	2012
title	Synthesizing Design Performance: An Evolutionary Approach to Multidisciplinary Design Search
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 67-75
doi	https://doi.org/10.52842/conf.acadia.2012.067
summary	Design is a goal oriented decision-making activity. Design is ill defined and requiring of synthetic approaches to weighing and understanding tradeoffs amongst soft and hard objectives, and the imprecise and or computationally explicit criteria and goals. In this regard designers in contemporary practice face a crisis of sorts. How do we achieve performance under large degrees of uncertainty and limited design cycle time? How do we better design for integrating performance? Fundamentally design teams, are not typically given enough time nor the best tools to design explore, to generate design alternatives, and then evolve solution quality to search for best fit through expansive design solution spaces. Given the complex criteria for defining performance in architecture our research approach experiments upon an evolutionary and integrative computational strategy to expand the solution space of a design problem as well as pre-sort and qualify candidate designs. We present technology and methodology that supports rapid development of design problem solution spaces in which three design domains objectives have multi-directional impact on each other. The research describes the use of an evolutionary approach in which a genetic algorithm is used as a means to automate the design alternative population as well as to facilitate multidisciplinary design domain optimization. The paper provides a technical description of the prototype design, one that integrates associative parametric modeling with an energy use intensity evaluation and with a financial pro forma. The initial results of the research are presented and analyzed including impacts on design process; the impacts on design uncertainty and design cycle latency; and the affordances for ‘designing-in’ performance and managing project complexity. A summary discussion is developed which describes a future cloud implementation and the future extensions into other domains, scales, tectonic and system detail.
keywords	Parametric Design , Domain Integration , Design Methods , Multidisciplinary Design Optimization (MDO) , Evolutionary Algorithms , Design Decision Support , Generative Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ascaad2012_011
id	ascaad2012_011
authors	Hemsath, Timothy L.
year	2012
title	Hybridizing Digital Fabrication Techniques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 103-114
summary	The use of digital fabrication in the production and making of architecture is becoming a prevalent vehicle for the design process. As a result, there is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, parametric modeling and digital fabrication in student education. This paper will highlight three student projects that look to ingrate computational prototyping with digital fabrication techniques in the production of architecture. The goal is to hybridize fabrication techniques of sectioning, tessellating and folding to educate students in CAD, CAM, parametric modeling and digital fabrication. Rather than repeating conventional approaches or recreating from precedent, mixing techniques challenges students to understand the CAD technique or parameters for modeling, translate for CAM production and deal with real world constraints of materials, time and tectonics. In the end, these projects are critical of the digital and projectively speculate on the architectural detail in an age of digital ubiquity.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_011.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_153
id	sigradi2012_153
authors	Kaufmann, Stefan; Petzold, Frank
year	2012
title	Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245
summary	In the time since European architects first began using computers in the building design process, the digital revolution has transformed how architects use planning tools completely. Today, digital tools are an indispensable part of planning practice. Besides a wide variety of digital modeling tools, parametric tools offer architects diverse options for generating cybernetic building models as BIM-models or homeostatic parametric geometry models. Cybernetic models help us to describe the buildings as a system and can improve planning efficiency. The aim of planning is to construct or fabricate an end result. The integration of digital fabrication methods in the digital chain is a fundamental goal if architects are to benefit from the progressive development of computer controlled machine tools. Fabrication integrated digital models can automate the planning process up to the production stage and enable the efficient fabrication of building components. The increased efficiency of planning and fabrication has facilitated a growing proliferation of buildings of increasing geometric complexity. Computers can open a door to the realization of new forms, spaces and construction systems to architects that understand the principles of fabrication-integrated cybernetic modeling.
keywords	didactic; parametric design; digital fabrication; CIM;
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2012_153
id	ecaade2012_153
authors	Kunze, Antje ; Dyllong, Julia ; Halatsch, Jan ; Waddell, Paul ; Schmitt, Gerhard
year	2012
title	Parametric building typologies for San Francisco Bay Area: A conceptual framework for the implementation of design code building typologies towards a parametric procedural city model
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 187-193
doi	https://doi.org/10.52842/conf.ecaade.2012.1.187
wos	WOS:000330322400018
summary	This research paper concentrates on a conceptual framework for the creation of high-level procedural city models. A workflow is presented, which enables users to create city models in an intuitive way by using design-code-driven building typologies. This drastically advances traditional procedural city modelling where usually low-level implementations of city model components take place. New planning methods and instruments have to be developed for the growing demand of the rapid environmental, social and economic changes in cities and agglomerations. The presented method allows for quick visualization and iteration by using urban planning typologies.
keywords	Procedural Modeling; Design Codes; Urban Planning; City Modeling; Decision-making process
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
doi	https://doi.org/10.52842/conf.acadia.2012.209
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia12_343
id	acadia12_343
authors	Leidi, Michele ; Schlüter, Arno
year	2012
title	Formal and Functional Implications of Dynamics-Related Solar Design Schemes
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 343-354
doi	https://doi.org/10.52842/conf.acadia.2012.343
summary	In recent years several solar radiation simulation tools have been developed to assist architects in analyzing the performance of existing building designs. However it is often unclear how the results of these analyses can help to generate new solutions and thus be truly beneficial for innovation in sustainable architectural design. Recent developments in open source applications that allow links between energy simulation engines and 3D modeling environments open a new layer of understanding. The possibility to better understand the dynamic interaction between incident solar radiation and building envelopes allows the synthesis of new architectural design-schemes. This paper presents the results of a series of experiments based on the case-study of a mid-latitude single-family house in Taiki-Cho, Japan. The first experiment describes how the incident solar energy interacts with the exposed components of the envelope. The second experiment describes how the energy demand of the building can be partially reduced through the design of passive interventions that are based on the dynamics of the demand. Finally, the third experiment exemplifies how, based on the knowledge extracted from the first two experiments, it is possible to synthesize new dynamics-related solar design-schemes that join passive techniques, active technologies, and formal aspects.
keywords	Form , Function , Dynamics , Solar , Design-Scheme , Mid-latitude
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia12_355
id	acadia12_355
authors	Melsom, James ; Fraguada, Luis ; Girot, Christophe
year	2012
title	Synchronous Horizons: Redefining Spatial Design in Landscape Architecture Through Ambient Data Collection and Volumetric Manipulation
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 355-361
doi	https://doi.org/10.52842/conf.acadia.2012.355
summary	The premise of this paper addresses the limited shared vocabulary of landscape architecture and architectural design - evident in the application of terms such as ‘spatial design’ and ‘spatial planning’. In their current usage, such terms emphasize the visible, terrestrial, pedestrian perspective level, often to the absolute exclusion of a spatial, ie. volumetric, comprehension of the environment. This deficit is acutely evident in the education of Landscape Architecture and Architecture, and discussion of their shared ground. The dominant document to map such analysis and design is the plan, or 3d-dimensional representations of the same, restricted to an extrusion or height map. GIS techniques in spatial design tend to be weighted towards visual, surface based data (slope analysis, exposure, viewshed etc.). Our goal within this domain lies in transforming aspects of the intangible - the characteristics of open space itself - into a form that is legible, quantifiable, and malleable.
keywords	Digital Aids to Design Creativity , Immersive Site analysis , UAV Site-Data Retrieval , Extra-Sensory Site Analysis , Environmental Dynamics Modeling , Design Process Iteration , Landscape and Urban scale data collection
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ecaade2012_238
id	ecaade2012_238
authors	Neuenschwander, Noemi ; Hayek, Ulrike Wissen ; Grêt-Regamey, Adrienne
year	2012
title	Integrated Multi-Criteria Modeling and 3D Visualization for Informed Trade-Off Decision Making on Urban Development Options
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. .203-211
doi	https://doi.org/10.52842/conf.ecaade.2012.1.x.j7k
wos	WOS:000330322400020
summary	Cities all over the world are faced with growing population pressure and are challenged by decreasing environmental quality. Development strategies and planning processes often fail to involve local environment knowledge. We present an approach to integrate environmental aspects into a two-step urban modeling framework, generating 3D visualizations from GIS-based and procedural modeling. The dynamic nature of this approach provides considerable support for transdisciplinary communication processes in urban planning.
keywords	Procedural modeling; generic urban pattern design; understanding ecosystem services; multi-criteria decision analysis (MCDA); GIS-based modeling
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: