Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	caadria2013_000
id	caadria2013_000
authors	Stouffs, Rudi; Patrick Janssen, Stanislav Roudavski and Bige Tunçer (eds.)
year	2013
title	Open Systems
doi	https://doi.org/10.52842/conf.caadria.2013
source	Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2012, 977 p.
summary	Contemporary challenges require inclusively integrated approaches to designing. Constrained by established modes of practice, such integration is impossible without a radical commitment to openness. In response to this need, the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) brought together contributions that engage with open systems in all aspects of architectural and urban design: open with respect to the scale of the design objectives and the context, from a building component within a building system to a neighbourhood or city within its urban and rural context; open with respect to the domains being considered, from planning to sustainable performance of a building or city; open with respect to the collaboration of disciplines and participants, from ad-hoc brainstorming to a rigorous process of consultation and feedback; open with respect to design methods and techniques, from physical modelling to digital prototyping; open with respect to design models and representations being adopted, from a parametric exploration to an ontological delineation considering Building Information Modelling, Built Environment Modelling or City Information Modelling; open with respect to the tools and applications being adopted, despite interoperability issues, from modelling to simulation and assessment; open with respect to the learning approach being adopted, from informal interaction and sharing to formal design education; open with respect to the open source approach being adopted in research and development, in order to gather community involvement and use. The conference was held 15-18 May 2013 at the Department of Architecture, School of Design and Environment, at National University of Singapore.By focusing on the theme of Open Systems, CAADRIA 2013 aimed to explore all these aspects and more, and raise awareness to the need of breaching disciplinary boundaries and reaching creative communities at all levels of expertise, by pooling resources, knowledge and practices, and integrating them through the adoption of open systems.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
wos	WOS:000330320600046
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_68
id	sigradi2012_68
authors	Borda, Adriane; Pires, Janice; Gomes, Hector Medina; Escobar, Andrew; Félix, Neusa Rodrigues
year	2012
title	Sistematização e disponibilização da produção de modelos tridimensionais digitais de patrimônio arquitetônico [Systematization and making available of the production three-dimensional digital models of the architectural heritage]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 321-324
summary	This paper describes the strategies which are being used to make a digital collection available, regarding the architectural heritage of the city of Pelotas, Rio Grande do Sul. Pelotas preserves architectural examples built between the end of the 18th century and the beginning of the 20th century. These examples include representatives of the Luso-Brazilian architecture, eclectic, transitional eclectic and pre-modern architecture. The representation of these examples has documented and valued such heritage, subsidizing the cultural memory of the city. The production system is a supportive process of teaching, research and extension, committed to the various possibilities for applying these representations and the evolution of the technological resources available.
keywords	Three-dimensional digital models; architectural heritage; digital archive; augmented reality.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201210405
id	ijac201210405
authors	Braumann, Johannes; Sigrid-Brell Cokcan
year	2012
title	Digital and Physical Tools for Industrial Robots in Architecture: Robotic Interaction and Interfaces
source	International Journal of Architectural Computing vol. 10 - no. 4, 541-554
summary	The development of digital and physical tools is highly dependent on interfaces, which define the terms of interaction both between humans and machines, as well as between machines and other machines.This research explores how new, advanced human machine interfaces, that are built upon concepts established by entertainment electronics can enhance the interaction between users and complex, kinematic machines. Similarly, physical computing greatly innovates machine-machine interaction, as it allows designers to easily customize microcontroller boards and to embed them into complex systems, where they drive actuators and interact with other machines such as industrial robots.These approaches are especially relevant in the creative industry, where customized soft- and hardware is now enabling innovative and highly effective fabrication strategies that have the potential to compete with high-tech industry applications.
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_024
id	caadria2012_024
authors	Brell-Cokcan, Sigrid; Johannes Braumann, Baris Cokcan and Martin Kleindienst
year	2012
title	Just in time design: Developing parametric design tools for architectural design
doi	https://doi.org/10.52842/conf.caadria.2012.455
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 455–464
summary	In this paper we will present custom design and parametric programming strategies for the design of complex spatial structures based on our applied research for a 10.000 m² freeform technology centre in Düzce, Turkey. The goal is to develop intuitive, easy-to-use parametric design components for layout, analysis, optimisation and aesthetic architectural free form design.
keywords	Parametric design; freeform architecture; quadrilateral meshes; software development; fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_058
id	ecaade2012_058
authors	Bus, Peter
year	2012
title	Emergence as a Design Strategy in Urban Development: Using Agent-Oriented Modelling in Simulation of Reconfiguration of the Urban Structure
doi	https://doi.org/10.52842/conf.ecaade.2012.1.599
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 599-605
summary	Agent-oriented modelling is one of the simulation methods for emergent behavior of a complex system that could be considered for application of urban city structures. Using advanced script techniques, the behavior and evolution of structures in the bottom-up strategies for the development of environment could be simulated in architecture and urbanism as well. The paper presents a research subproject in the area of verifi cation of the processes of spatial and social interaction of the agents according to the logic of defined intrinsic rules of Swarm behavior in the simulation model of the selected area. The research builds mainly upon two selected requirements of the bottom-up strategy: the approach distances to places of interest and mutual standoff distances between urban elements.
wos	WOS:000330322400062
keywords	Emergence; simulation; self-organization process; agent-oriented modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_237
id	sigradi2012_237
authors	Colombo, Mónica Fernández; Bonvecchi, Liliana
year	2012
title	Entornos Colaborativos y Redes Sociales [Collaboritive environment and network]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 101-103
summary	Workshop practices in architecture schools are increasingly incorporating alternative collaborative work in visual environments that facilitate the dissemination and knowledge management. This requires defining strategies and applications using appropriate technologies in order to identify, create, organize, store and share, both academic practices and research results.
keywords	entornos colaborativos; tecnologías; visualización; redes sociales
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	c4bd
id	c4bd
authors	Derix C, Gamlesæter A, Miranda P, Helme L and Kropf K
year	2012
title	Simulation Heuristics for Urban Design
source	In Mueller Arisona et al (eds), Digital Urban Modelling and Simulation: Communications in Computer and Information Science, Springer, Heidelberg, 2012
summary	Designing simulations for urban design not only requires explicit performance criteria of planning standards but a synthesis of implicit design objectives, that we will call ‘purpose rules’, with computational approaches. The former would at most lead to automation of the existing planning processes for speed and evaluation, the latter to an understanding of perceived urban qualities and their effect on the planning of cities. In order to transform purpose rules into encoded principles we argue that the focus should not be on defining parametric constraints and quantities, but on aligning the perceptual properties of the simulations with the strategies of the stakeholders (planner/ urban designer/ architect/ developer/ community). Using projects from the Computational Design and Research group at Aedas [CDR] as examples, this chapter will discuss how an open framework of lightweight applications with simple functionality can be integrated into the design and planning process by using computational simulations as urban design heuristics.
keywords	urban design, design heuristics, meta-heuristics, simulation, algorithm visualization
series	book
type	normal paper
email
more	http://www.springerlink.com/content/g58114676q4228h8/?MUD=MP
last changed	2012/09/20 14:17

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2012_214
id	sigradi2012_214
authors	Ibarra, Bárbara; Jové, Clara
year	2012
title	Diseño de estrategias para el consumo responsable de aparatos electrónicos [Design of strategies for responsible consumption of electronic devices]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 149-153
summary	Exploratory, analytical and experimental research held in Santiago, Chile, seeks to propose strategies that encourage responsible consumption of electronic devices (ED) for young people in order to extend the life of personal computers. Through the study of consumption and users’ behavior with their personal computers and the analysis of stimulus and information founded in ED, this research expects to identify significant aspects that can be incorporated into new design proposals in software and hardware.
keywords	electronic devices (ED); consumption; young user; interface; e-waste
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	acadia12_315
id	acadia12_315
authors	Imbern, Matias ; Raspall, Felix ; Su, Qi
year	2012
title	Tectonic Tessellations: A Digital Approach to Ceramic Structural Surfaces
doi	https://doi.org/10.52842/conf.acadia.2012.315
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 315-321
summary	From the beginning of digital revolution, structural surfaces drew significant attention as a realm that interweaves formal explorations, form-finding and structural optimization. However, after successful experimentation in the virtual domain, it became evident that some of the main challenges lay on how to translate these structural forms into architectural assemblies at the scale of buildings. The development of digital fabrication is crucial in this task, as means to overcome traditional constraints such as need for modular pieces, scaffolding and optimal assembly sequences.This research focuses on digital workflows that combine form finding with robotic fabrication, surface tessellation and panelization. In the past years, the use of digital tools to assemble identical modules into complex formations has achieved significant results for loadbearing walls. Expanding this line of research, the proposed fabrication system carries these experiments on additive fabrication into the production of structural surfaces. The assembly sequence involves a two-step fabrication: off-site panel manufacturing and on-site assembly. The main components of the system consist of two triangular ceramic pieces that provide structural resistance, refined surface finish, and formwork for thin reinforced-concrete layer. Panelization strategies reduce the requirements on-site work and formwork.The paper describes background research, concept, construction process, methodology, results and conclusions.
keywords	Digital Fabrication , Complex Geometry , Reinforced Ceramic , Structural Surfaces , Reduced Formwork
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	caadria2012_069
id	caadria2012_069
authors	Kaijima, Sawako
year	2012
title	Computer simulation for intuitive structuring
doi	https://doi.org/10.52842/conf.caadria.2012.369
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 369–378
summary	Computer simulation methods have opened up new possibilities for design and research by introducing environments in which we can manipulate and observe. For instance, architects utilise three-dimensional modelling tools to simulate architectural geometries, and engineers use Finite Element software to simulate structural behaviour. Simulation tools make certain aspects of architecture efficient, but, on the other hand, they have brought new types of challenges into the field. One such challenge is the structuring of so-called complex geometries. These forms are often conceived in an environment where gravity, scales, and material are absent and calculated in a model where geometries are frozen and static. As a result, there exists little understanding between the two disciplines in solving the design to come to a well-negotiated form. In the context thereof, our work focuses on the development of interactive simulation environments that induce intuition towards the specific counter-intuitive problem of structuring in the early stages of design. The paper gives insights into aspects of simulation relevant to architectural design and structural engineering. Subsequently, three simulation environments that we have developed are presented to demonstrate our strategies.
keywords	Computer simulation; finite element analysis; interactive software
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_152
id	ecaade2012_152
authors	Krieg, Oliver David; Mihaylov, Boyan; Schwinn, Tobias; Reichert, Steffen; Menges, Achim
year	2012
title	Computational Design of Robotically Manufactured Plate Structures Based on Biomimetic Design Principles Derived from Clypeasteroida
doi	https://doi.org/10.52842/conf.ecaade.2012.2.531
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 531-540
summary	The paper presents the current development of an ongoing research project about the integration of robotic fabrication strategies in computational design through morphological and functional principles derived from natural systems. Initially, a developed plate structure material system based on robotically fabricated fi nger joints is being informed by biomimetic principles from the sea urchin Clypeasteroida in order to be able to adapt effi ciently to its building environment. Consequently, the paper’s main focus lies on translating the biomimetic design principles into a computational design tool, also integrating fabrication parameters as well as structural and architectural demands. The design tool’s capability to integrate these parameters is shown by the design, development and realization of a full-scale research pavilion. The paper concludes with discussing the performative capacity of the developed material system and the introduced methodology.
wos	WOS:000330320600056
keywords	Biomimetics; Digital Simulation; Parametric Design; Robotic Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2020_174
id	sigradi2020_174
authors	Marques, Aline Calazans; Felicio, José Augusto Recker
year	2020
title	Dialogue between Building Shape and Thermal Performance
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 174-179
summary	This paper deals with the research of the building shape in a constant and dialectical relationship with thermal performance. The purpose of this research is to understand and explore the dialogue between shape and performance with generative strategies. The method was based on the works by Oxman (2010), Olgyay (2015), and Di Mari & Yoo (2012), by means that relate the form to performance issues. The thermal performance data found to result from the relationship between thermal conditions, the shape of the envelope, and the characteristics of the eight Brazilian bioclimatic zones.
keywords	Building shape, Thermal performance, Generative system, Teaching observation
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	ecaade2012_099
id	ecaade2012_099
authors	Morton, Peter James ; Horne, Margaret ; Dalton, Ruth Conroy ; Thompson, Emine Mine
year	2012
title	Virtual City Models: Avoidance of Obsolescence
doi	https://doi.org/10.52842/conf.ecaade.2012.1.213
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 213-224
summary	This paper offers an initial and ongoing investigation into the research area of Virtual City Models (VCMs). It builds upon previous research carried out by the VirtualNewcastleGateshead (VNG) team by providing an overview of VCMs multifunctions and emerging issues but specifi cally investigating the obsolescence factors and obsolescence-prevention strategies. This paper is part of a PhD research and provides a preliminary exploration of the issues described above. The study will conclude by identifying the progress of VNG thus far and the strategies employed by the VNG team to tackle the obsolescence factors identifi ed in this paper.
wos	WOS:000330322400021
keywords	Virtual City Models; Applications; Services; Obsolescence Factors; Strategies
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2015_161
id	ecaade2015_161
authors	Papasarantou, Chrissa; Kalaouzis, Giorgos, Pentazou, Ioulia and Bourdakis, Vassilis
year	2015
title	A Spatio-Temporal 3D Representation of a Historic Dataset
doi	https://doi.org/10.52842/conf.ecaade.2015.1.701
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 701-708
summary	Previous research (Bourdakis et al, 2012; Papasarantou et al, 2013) dealt with the problem of creating information visualisation systems capable of combining historical data of MUCIV's database and developing strategies that embed the non-spatial data in spatial models. The database was primarily designed as an experimental flexible spatio-temporal configuration of dynamic visual structures generating a variety of narrations through interaction.The attempt of producing a legible configuration driven by a number of criteria, led to the proposition of two different arrangements, namely the linear and radial array. The aim of this paper is to present the next step on the visualization after redefining both the way that thematic axes and data are visualized and arranged/scattered. Alternate configurations are investigated, based also on theoretical analysis on the conceptualization and perception of information visualization systems (Card et al 1999, Ware, 2004).
wos	WOS:000372317300076
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=74178dba-702a-11e5-aa5b-67bfe1e6502f
last changed	2022/06/07 08:00

For more results click below: