Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 226

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_231
id	acadia12_231
authors	Bell, Brad
year	2012
title	Parametric Precast Concrete Panel System
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 231-238
doi	https://doi.org/10.52842/conf.acadia.2012.231
summary	The working hypothesis of this research focuses on the potential of utilizing a digital toolset to engage information within a surrounding context for the purpose of creating a more intelligent pre-cast concrete panel system. The Parametric Pre-Cast Concrete Panel System is a research project attempting to parametrically define geometry for the purpose of producing formwork based on quantitative information related to issues such as environmental control systems, sound abatement, as well as qualitative information like non-standard variation paneling, and aesthetic composition.
keywords	Energy , form , structures , performance , simulation , prototyping , precast , concrete
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
doi	https://doi.org/10.52842/conf.acadia.2012.209
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
wos	WOS:000330322400002
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_67
id	acadia12_67
authors	Gerber, Dr. David Jason ; Lin, Shih-Hsin
year	2012
title	Synthesizing Design Performance: An Evolutionary Approach to Multidisciplinary Design Search
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 67-75
doi	https://doi.org/10.52842/conf.acadia.2012.067
summary	Design is a goal oriented decision-making activity. Design is ill defined and requiring of synthetic approaches to weighing and understanding tradeoffs amongst soft and hard objectives, and the imprecise and or computationally explicit criteria and goals. In this regard designers in contemporary practice face a crisis of sorts. How do we achieve performance under large degrees of uncertainty and limited design cycle time? How do we better design for integrating performance? Fundamentally design teams, are not typically given enough time nor the best tools to design explore, to generate design alternatives, and then evolve solution quality to search for best fit through expansive design solution spaces. Given the complex criteria for defining performance in architecture our research approach experiments upon an evolutionary and integrative computational strategy to expand the solution space of a design problem as well as pre-sort and qualify candidate designs. We present technology and methodology that supports rapid development of design problem solution spaces in which three design domains objectives have multi-directional impact on each other. The research describes the use of an evolutionary approach in which a genetic algorithm is used as a means to automate the design alternative population as well as to facilitate multidisciplinary design domain optimization. The paper provides a technical description of the prototype design, one that integrates associative parametric modeling with an energy use intensity evaluation and with a financial pro forma. The initial results of the research are presented and analyzed including impacts on design process; the impacts on design uncertainty and design cycle latency; and the affordances for ‘designing-in’ performance and managing project complexity. A summary discussion is developed which describes a future cloud implementation and the future extensions into other domains, scales, tectonic and system detail.
keywords	Parametric Design , Domain Integration , Design Methods , Multidisciplinary Design Optimization (MDO) , Evolutionary Algorithms , Design Decision Support , Generative Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	acadia12_287
id	acadia12_287
authors	McGee, Wes ; Newell, Catie ; Willette, Aaron
year	2012
title	Glass Cast: A Reconfigurable Tooling System for Free-Form Glass Manufacturing
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 287-294
doi	https://doi.org/10.52842/conf.acadia.2012.287
summary	Despite glass’s ubiquity in the modern built environment it is rarely applied in applications requiring complex curvature. The high temperatures and complexity of techniques utilized in forming curved glass panels are typically very expensive to employ, requiring dedicated hard-tooling which ultimately limits the formal variation that can be achieved. This combination of economic and manufacturing barriers limits both the formal possibilities and potentially the overall envelope-performance characteristics of the glazing system. This research investigates a methodology for utilizing reconfigurable tooling to form glass into doubly curved geometries, offering the potential for improved structural and environmental performance in a material that has remained largely unchanged since the advent of its industrial manufacturing. A custom built forming kiln has been developed and tested, integrated through a parametric modeling workflow to provide manufacturing constraint feedback directly into the design process. The research also investigates the post-form trimming of glass utilizing robotic abrasive waterjet cutting, allowing for the output of machine control data directly from the digital model. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Digital Fabrication , Robotic Fabrication , Computational Design , Material Computation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia12_187
id	acadia12_187
authors	Mei-Ling, Lin ; Han, Ling ; Kothapuram, Shankara ; Jiawei, Song
year	2012
title	Digital Vernacular
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 187-195
doi	https://doi.org/10.52842/conf.acadia.2012.187
summary	Digital Vernacular investigates the potential of the process of depositing a paste like material with precision using a CNC device which has produced an innovative system for design and fabrication of environmentally responsive housing. Architectural practice has been greatly impacted by technical innovations in the past, usually new building types emerge as part of new ideologies. Yet the current revolution in computer-aided design and fabrication has architecture focusing on form – without questioning what these new processes can bring for the masses. The research project 'Digital Vernacular' has investigated the potential of using CNC technology for the production of housing. It has focused on the design of the machinic devices as well as computational design tools, and revolves around the concept of fabrication on site. Using an additive and layered manufacturing process and locally available material, the project proposes a revolutionary new digital design and fabrication system that is based on one of the oldest and most sustainable construction methods in the world. The main potentials of this method are not to create complex forms for the sake of design, but to use parametric control to adapt each design to the specificities of its site. Using geometrical rules found during many research experiments with real material behaviour, a new architectural language is created that merges several environmental functionalities into a single integrated design.
keywords	Digital , Vernacular , CNC , CAM , Housing , fabrication , environmental
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ecaade2013_128
id	ecaade2013_128
authors	Symeonidou, Ioanna; Hirschberg, Urs and Kaftan, Martin
year	2013
title	Designing the Negative
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 683-691
doi	https://doi.org/10.52842/conf.ecaade.2013.1.683
wos	WOS:000340635300071
summary	Designing the Negative was the title of a Master Studio that took place at the Institute of Architecture and Media of Graz University of Technology during the summer semester of 2012. Students designed and fabricated prototypes of customized concrete formwork as part of their studio assignment. The studio theme forced students to think about digital fabrication with parametric tools in a hands-on fashion. Using robotic technology and hot-wire cutting, students worked with the robot’s constraints (size of the robot’s arm, robot’s axis and tool’s restrictions) to design complex curved elements that could serve as formwork (the negative) for cast concrete elements (the positive). The students were asked to design a production strategy for their cast concrete elements as well as the application of said elements in an architectural scheme. The student projects confirmed the value of a pedagogy that takes on research-relevant questions in an interdisciplinary studio setting and engages students in a process that is best described as digital crafting: it simultaneously addressed the conceptual and technical as well as the material and tactile aspects of digital fabrication and design.
keywords	Digital fabrication; customization; concrete; hot-wire cutting; parametric design.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_315
id	acadia12_315
authors	Imbern, Matias ; Raspall, Felix ; Su, Qi
year	2012
title	Tectonic Tessellations: A Digital Approach to Ceramic Structural Surfaces
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 315-321
doi	https://doi.org/10.52842/conf.acadia.2012.315
summary	From the beginning of digital revolution, structural surfaces drew significant attention as a realm that interweaves formal explorations, form-finding and structural optimization. However, after successful experimentation in the virtual domain, it became evident that some of the main challenges lay on how to translate these structural forms into architectural assemblies at the scale of buildings. The development of digital fabrication is crucial in this task, as means to overcome traditional constraints such as need for modular pieces, scaffolding and optimal assembly sequences.This research focuses on digital workflows that combine form finding with robotic fabrication, surface tessellation and panelization. In the past years, the use of digital tools to assemble identical modules into complex formations has achieved significant results for loadbearing walls. Expanding this line of research, the proposed fabrication system carries these experiments on additive fabrication into the production of structural surfaces. The assembly sequence involves a two-step fabrication: off-site panel manufacturing and on-site assembly. The main components of the system consist of two triangular ceramic pieces that provide structural resistance, refined surface finish, and formwork for thin reinforced-concrete layer. Panelization strategies reduce the requirements on-site work and formwork.The paper describes background research, concept, construction process, methodology, results and conclusions.
keywords	Digital Fabrication , Complex Geometry , Reinforced Ceramic , Structural Surfaces , Reduced Formwork
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	acadia12_239
id	acadia12_239
authors	Jackson, Jesse ; Stern, Luke
year	2012
title	Fabricating Sustainable Concrete Elements: A Physical Instantiation of the Marching Cubes Algorithm
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 239-247
doi	https://doi.org/10.52842/conf.acadia.2012.239
summary	This paper explores how an algorithm designed to represent form can be made physical, and how this physical instantiation can be made to respond to a set of design imperatives. Specifically, the paper demonstrates how Marching Cubes (Lorensen and Cline 1987), an algorithm that extracts a polygonal mesh from a scalar field, can be used to initiate the design for a system of modular concrete armature elements that permit a large degree of variability using a small number of discrete parts. The design of these elements was developed in response to a close examination of Frank Lloyd Wright's Usonian Automatic system, an architecturally pertinent historical precedent. The fabricated results positively satisfy contemporary design criteria, including maximal formal freedom, optimal environmental performance, and minimal life-cycle costs.
keywords	Form-finding Algorithms , Digital Fabrication , Sustainability , Frank Lloyd Wright , Concrete , Tectonic Elements
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
wos	WOS:000330322400051
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_130
id	ecaade2012_130
authors	Beirão, José ; Arrobas, Pedro ; Duarte, José
year	2012
title	Parametric Urban Design: Joining morphology and urban indicators in a single interactive model
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.167-175
doi	https://doi.org/10.52842/conf.ecaade.2012.1.167
wos	WOS:000330322400016
summary	A parametric urban design system integrating GIS data in a CAD environment is proposed as a platform for discussing urban plans providing flexibility and information access in an interactive fashion. The proposed system links calculations of urban indicators with the parameter manipulation of the layout geometry, therefore allowing for a systematic update of indicators according to design modifi cations. Hence, design may be fine-tuned in an informed manner enhancing the quality of design decisions.
keywords	Parametric urban design; density studies; design methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
doi	https://doi.org/10.52842/conf.caadria.2012.527
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_141
id	ecaade2012_141
authors	Castro e Costa, Eduardo; Coutinho, Filipe; Duarte, José Pinto; Krüger, Mário
year	2012
title	Modelling Alberti’s Column System: Generative Modelling and Digital Fabrication of Classical Architectural Elements
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 469-477
doi	https://doi.org/10.52842/conf.ecaade.2012.2.469
wos	WOS:000330320600049
summary	The research presented further is part of the Digital Alberti research project, which aims to assess the infl uence of Leon Batista Alberti’s theory on Portuguese architecture, through the use of digital technologies. One of the project tasks implied computational and physical modelling of Alberti’s column system. Development of the computational model implied decoding Alberti’s treatise on architecture De re aedifi catoria into a consistent set of parameters and relationships, and then implementing these into generative parametric computer programs through visual programming language Grasshopper. This computational model is able to automatically generate physical models of classical columns according to Alberti’s canons. These digital models were then materialized through production of physical models, through rapid prototyping and digital fabrication technologies. Special attention is given to the CNC stone milling of a Corinthian capital.
keywords	Alberti; De re aedifi catoria; Column system; Generative modelling; Digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac201210108
id	ijac201210108
authors	Celani, Gabriela; Carlos Eduardo Verzola Vaz
year	2012
title	CAD Scripting and Visual Programming Languages for Implementing Computational Design Concepts: A Comparison from a Pedagogical Point of View
source	International Journal of Architectural Computing vol. 10 - no. 1, 121-138
summary	This paper compares the use of scripting languages and visual programming languages for teaching computational design concepts to novice and advanced architecture students. Both systems are described and discussed in terms of the representation methods they use. With novice students better results were obtained with the visual programming language. However, the generative strategies used were restricted to parametric variation and the use of randomness. Scripting, on the other hand, was used by advanced students to implement rule-based generative systems. It is possible to conclude that visual languages can be very useful for making architecture students understand general programming concepts, but scripting languages are fundamental for implementing generative design systems. The paper also discusses the importance of the ability to shift between different representation methods, from more concrete to more abstract, as part of the architectural education.
series	journal
last changed	2019/07/30 10:55

_id	sigradi2012_27
id	sigradi2012_27
authors	de Morais, Lívia Paula Zanelli; Sperling, David Moreno
year	2012
title	MVRDV e Regionmaker: arquitetura e espacialização da informação [MVRDV and Regionmaker: architecture and information spacialization]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 566-569
summary	This paper is part of an ongoing research that analyzes the housing projects of the Dutch office MVRDV through their theoretical research and design processes. The text focuses on the use of parametric software according to two key aspects that qualify their production: research and conceptual creative potential. Since the late 1990s, the architects are positioning their practice under a strategy that combines collection, processing and interpretation of large amounts of data, what means the conversion of statistical information into concrete and inventive form. With this demand the office developed parametric software as Regionmaker, the case study presented here.
keywords	processos de projeto; softwares paramétricos; Regionmaker; MVRDV; otimização
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
doi	https://doi.org/10.52842/conf.caadria.2015.765
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2012_116
id	ecaade2012_116
authors	Doelling, Max ; Nasrollahi, Farshad
year	2012
title	Building Performance Modeling in Non-simplified Architectural Design Procedural and cognitive challenges in education
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.97-106
doi	https://doi.org/10.52842/conf.ecaade.2012.1.097
wos	WOS:000330322400009
summary	The building technology class “Parametric Design” simultaneously teaches thermal and daylight performance simulation to novice users, usually Master of Architecture students. Own buildings are created, analysed and geometrically modified during the design process, resulting in structures that are energetically pre-optimized. It is shown that energy demand and daylight utilization can be signifi cantly improved while taking into account formal considerations. Departing from a design process model that gives preference to either engineering or design thinking, multi-modal decision-making is diagnosed to be mediated by hybrid or multivalent representations, necessitating a shift in how inter-domain design knowledge flows might be understood. Opposed to purely linear or iterative process assumptions, a fluent state model of interconnected domains of analytic inquiry is proposed.
keywords	Sustainable design; daylight simulation; thermal simulation; architectural education; design epistemology
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
doi	https://doi.org/10.52842/conf.caadria.2012.465
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: