Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
doi	https://doi.org/10.52842/conf.acadia.2012.209
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email	niels.martin.larsen@aarch.dk
last changed	2022/06/07 07:52

_id	acadia12_439
id	acadia12_439
authors	As, Imdat ; Angelico, Maria
year	2012
title	Crowdsourcing Architecture: A Disruptive Model in Architectural Practice
doi	https://doi.org/10.52842/conf.acadia.2012.439
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 439-443
summary	This paper discusses the use of crowdsourcing as a new approach for architectural design acquisition. We will give an overview of the concept of crowdsourcing, and elaborate on its particular application in architecture via concrete projects executed on Arcbazar, a firstof- its-kind crowdsourcing platform for architectural design services. We argue that online crowdsourcing platforms can have an immense impact on smaller-scale design challenges, e.g., home remodeling projects and landscape and interior design challenges, and can potentially carry these often neglected projects into the architectural design sphere. In this paper we will discuss the methods and techniques of architectural crowdsourcing and illustrate the processes and outcomes through a series of projects: a remodeling project for a closet; an interior design challenge for a dining space; and a layout problem for an apartment complex. We will then evaluate the protocol and outcome of architectural crowdsourcing, and convey the professional and popular media response to this new method of architectural design acquisition.
keywords	crowdsourcing , competitions , networking , interaction , collaboration
series	ACADIA
type	panel paper
email	as@hartford.edu
last changed	2022/06/07 07:54

_id	sigradi2014_018
id	sigradi2014_018
authors	Florio, Wilson
year	2014
title	Reflexão sobre seis residências emblemáticas a partir da tecnologia BIM e da fabricação digital [Reflection on emblematic residences from static / dynamic simulations and digital fabrication]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 311-315
summary	The aim of this paper is to report the teaching experience held in 2012 at Unicamp between three disciplines of representation. Students analyzed emblematic residences from digital and physical models. Digital models were produced in Revit and its building components were diagrammed in AutoCad. After that, these elements were sent to laser cutter, and hand assembled. In 3DS Max, 3D model allowed simulations such as rendered images and animations. We report the contributions of these analog and digital artifacts in the design process. This article contributes to reflection and debate on the application of digital technologies in the analysis of iconic buildings of architecture.
keywords	Geometric Modeling; Digital Fabrication; Model; Revit; Teaching-learning
series	SIGRADI
email	wflorio@uol.com.br
last changed	2016/03/10 09:52

_id	acadia12_355
id	acadia12_355
authors	Melsom, James ; Fraguada, Luis ; Girot, Christophe
year	2012
title	Synchronous Horizons: Redefining Spatial Design in Landscape Architecture Through Ambient Data Collection and Volumetric Manipulation
doi	https://doi.org/10.52842/conf.acadia.2012.355
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 355-361
summary	The premise of this paper addresses the limited shared vocabulary of landscape architecture and architectural design - evident in the application of terms such as ‘spatial design’ and ‘spatial planning’. In their current usage, such terms emphasize the visible, terrestrial, pedestrian perspective level, often to the absolute exclusion of a spatial, ie. volumetric, comprehension of the environment. This deficit is acutely evident in the education of Landscape Architecture and Architecture, and discussion of their shared ground. The dominant document to map such analysis and design is the plan, or 3d-dimensional representations of the same, restricted to an extrusion or height map. GIS techniques in spatial design tend to be weighted towards visual, surface based data (slope analysis, exposure, viewshed etc.). Our goal within this domain lies in transforming aspects of the intangible - the characteristics of open space itself - into a form that is legible, quantifiable, and malleable.
keywords	Digital Aids to Design Creativity , Immersive Site analysis , UAV Site-Data Retrieval , Extra-Sensory Site Analysis , Environmental Dynamics Modeling , Design Process Iteration , Landscape and Urban scale data collection
series	ACADIA
type	panel paper
email	fraguada@iaac.net
last changed	2022/06/07 07:58

_id	ecaade2012_069
id	ecaade2012_069
authors	Pitts, Gregg ; Luther, Mark
year	2012
title	A Parametric Approach to 3D Massing and Density Modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.157
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.157-165
wos	WOS:000330322400015
summary	This paper addresses the current void between social agendas, environmental criteria and design methodology in urban planning through the implementation of new computational systems. It considers the application of digital design tools such as GIS and parametric systems towards more effi cient and effective design solutions. The digital design methods have been developed and tested within Grimshaw Architects Design Technology Group on both Australian and international urban development projects. A methodology for the use of parametric design for urban design development is suggested for defi ning, simplifying and categorising planning and design strategies. The following tools are a means of generating urban design concepts as digital forms in order to better inform the designer during the design process.
keywords	Parametric; Urbanism; Sustainability
series	eCAADe
last changed	2022/06/07 08:00

_id	ascaad2012_004
id	ascaad2012_004
authors	El-Masri, Souheil; Mazen Kana’an and Mohammed Fawzi Elanany
year	2012
title	Architecture, Digital Techniques & Project Management
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 14-20
summary	With the invention of computers, Architecture and other Engineering disciplines have undergone revolutionary developments offering new opportunities for improving efficiency and opening new frontiers for creativity. For example in architecture and urban planning, the discussions have been extended from conventional writings to cover cyberspace, virtual architecture and digital city. Moreover, computers have helped in the realization of many complex projects that would be inconceivable with traditional drawing techniques. This is clearly demonstrated in the works of Frank Gehry's, Zaha Hadid, Daniel Libeskind and many others. In deed, digital techniques have changed the design creative process and how the architects think. Traditionally the structured development architectural ideas from 2D drawings (plans, sections, elevations) towards 3D resolution has been replaced by more interactive approach of 2D & 3D. The changes that digital techniques have brought to the field of Architecture; including practice and education, can obviously be viewed from different angles and incite many discussions and questions. However, the purpose of this presentation is to discuss the role of digital techniques within the overall framework of project management in Gulf Housing Engineering. It starts the discussion with a brief on architecture and digital techniques in the Gulf Region, especially during the “boom period”; a period characterized by rapid production of buildings relying heavily on virtual images. It is against this background, the role of digital techniques is evaluated from a practice point of view. In fact in GHE, digital means are integral parts of the holistic project delivery process starting form initiation, to various design stages to construction ending with project completion. In this process emphasis is paid to the inter-relationships between IT Systems and Quality Control which in turn facilitate measuring, monitoring and reporting on various managerial, technical and design and budgetary aspects of the project. The presentation is supported by real case studies of GHE portfolio. It emphasizes that digital techniques should be an integral part of an overall process and should be seen as means to enhance efficiency and creativity; and should contribute to the betterment of the built environment
series	ASCAAD
email	ad@ghe.com.bh
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_004.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_95
id	sigradi2012_95
authors	Groetelaars, Natalie Johanna; Arivaldo Leão de Amorim
year	2012
title	Dense Stereo Matching (DSM): conceitos, processos e ferramentas para criação de nuvens de pontos por fotografias [Dense Stereo Matching (DSM): concepts, processes and tools to generate point cloud from photographs]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 361-365
summary	This paper treats the technology to generate point clouds from photographs, more known as Dense Stereo Matching (DSM) or Structure from Motion (SfM), among other terminologies. The article presents the concepts, basic principles and architectural survey phases with DSM: planning, data acquisition, processing and post-processing to obtain other products from point cloud data. Then, we present several existing software for DSM, classified in three categories: web-based tools, free software/opensource and commercial software. Finally, we discuss the potentialities of this new technologies for architectural documentation and compare DSM with 3D laser scanning.
keywords	Dense Stereo Matching (DSM); Nuvem de pontos; Levantamento cadastral; Documentação arquitetônica; Ferramentas computacionais
series	SIGRADI
email	alamorim@ufba.br
last changed	2016/03/10 09:52

_id	ecaade2012_209
id	ecaade2012_209
authors	Prousalidou, Elena
year	2012
title	A Digital Model for Fabric Formwork Panels: Using Physical Data to Train the Digital Model
doi	https://doi.org/10.52842/conf.ecaade.2012.2.159
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 159-167
wos	WOS:000330320600016
summary	In the context of a wider inquiry on the integration of material properties and construction processes in computational models, this paper proposes a digital model for fabric formwork panels. Plaster cast in different types of fabric can produce a significant variation of resulting forms. The aim is to investigate whether data retrieved from physical models with 3D scanning techniques can improve the accuracy and efficiency of a simulation based on geometric principles, and better predict the behaviour of cast material in relation to the type of fabric. Setting up the computational model and choosing its parameters and constraints is based on the physical construction process, highlighting the relationship between material and form. As part of the cyclical exchange, evaluation of the digital model with physical testing demonstrates that the simulation can actually be trained by reducing the physical/ digital discrepancies.
keywords	Fabric formwork; simulation; dynamic relaxation; 3d scanning; kinect
series	eCAADe
email	eprous@gmail.com
last changed	2022/06/07 08:00

_id	sigradi2012_404
id	sigradi2012_404
authors	Angelo, Alex; Neves, Heloisa; de Campos, Paulo Eduardo Fonseca
year	2012
title	Fab Lab Kids: Oficina de projetos socioambientais para crianças de escolas públicas fazendo uso da eletrônica e da fabricação digital [Fab Lab Kids: Workshop for environmental projects public school children making use of electronics and digital fabrication]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 383-387
summary	This article describes the process of theoretical and practical Fab Lab Kids Project in Brazil and in more detail the “Fab Lab Kids: Workshop environmental projects for public school children through manufacturing and digital electronics”, the most recent edition of this project, which consists conducting an experimental workshop with students from public school in the city of Guarulhos, São Paulo. Through the concept of learning by doing, children are exposed to the possibility of acting on the environment and the objects surrounding them, proposing objects that might solve socio-environmental issues, which are produced via electronics and digital fabrication.
keywords	Fabricação Digital, Eletrônica, Educação, Redes, Fab Lab
series	SIGRADI
email	alexgarciadesign@gmail.com
last changed	2016/03/10 09:47

_id	caadria2012_115
id	caadria2012_115
authors	Biswas, Tajin; Tsung-Hsien Wang and Ramesh Krishnamurti
year	2012
title	Data sharing for sustainable assessments: Using functional databases for interoperating multiple building information structures
doi	https://doi.org/10.52842/conf.caadria.2012.193
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 193–202
summary	This paper presents the development and implementation of an automatic sustainable assessment prototype using functional databases. For the practical purpose, we use Leadership in Energy and Environmental Design (LEED) as the exemplar standard to demonstrate the integrative process from building information aggregation to final evaluation. We start with a Building Information model, and use Construction Operations Building Information Exchange (COBie) as a bridge to integrate LEED requirements. At present, the process of sustainable building assessment requires information exchange from various building professionals. However, there is no procedure to manage, or use, information pertaining to sustainability. In our research, we translate rules from LEED into computable formulas and develop a prototype application to produce templates for LEED submission.
keywords	Building information databases; sustainable assessment
series	CAADRIA
email	tajin@cmu.edu
last changed	2022/06/07 07:52

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email	mjoaomoliveira@gmail.com
last changed	2022/06/07 07:55

_id	caadria2012_067
id	caadria2012_067
authors	Delfosse, Vincent; John Schrayen, Roland Juchmes and Pierre Leclercq
year	2012
title	Some advice for migrating to IFC
doi	https://doi.org/10.52842/conf.caadria.2012.265
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 265–274
summary	Nowadays, the BIM (Building Information Modelling) paradigm is a central topic in the CAAD community. Next to the commercial solutions, the IFC (Industry Foundation Classes) have emerged as the best open standard candidate for BIM interoperability. Despite the efforts of the community for promoting IFC over the last 15 years, it seems that its practical adoption in real-life projects has been very limited. The goal of this article is to explore how useful IFC can be today and to provide the reader with some advice for an effective adoption of IFC. Over the last year, we have conducted a project aiming at acquiring a sound understanding of IFC. It was made of two complementary investigations. On one hand, we have focused on the commercial modelling tools and the IFC support they were offering. On the other hand, we have focused on the IFC-based software developments. We have developed a tool converting IFC files into a dedicated thermal assessment based model. We will summarise the experience we have acquired in this project into some advice for users migrating to IFC. Our goal is to confront the practical aspects of the IFC developments, with both the theoretical ambitions and the commercial support currently available.
keywords	Building information modelling; industry foundation classes; interoperability
series	CAADRIA
email	vincent.delfosse@ulg.ac.be
last changed	2022/06/07 07:55

_id	caadria2012_098
id	caadria2012_098
authors	Fok, Wendy W.
year	2012
title	Cross pollination of ideas: Design fabrication and experimentation
doi	https://doi.org/10.52842/conf.caadria.2012.589
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 589–598
summary	The following pages show a selection of studio projects which explore the opportunistic collaborative process between commercial fabricators, material sponsorships, and the institution. The articles speaks about the intersection of design experimentation and significance of fabrication within the contained process of [design \| optimisation \| fabrication]. Within this process the article intersects between practice, commercialisation, and design-research, into the development arena of architectural academic outcomes. The demonstrating fact within much of the research and development also touches upon intricate details of modularity, and designing with optimisation in mind for the purpose (and ease) of fabrication, prototyping, and ‘real-life’ production. While the focus of the academic studios deliberates and uses parametric design systems through digital and analogue modelling to contribute to a full scale designed installation, and actively working with a commercial fabricator and material sponsor (Luxx Newhouse & LG Hausys HI-MACS). The aim of the courses were to acquaint students with theoretical and practical conditions needed for the creating of experimental relational modularity between geometry, scale, and materials as well as the ability to negotiate between quick intuitive studies and definitive quantifiable decisions.
keywords	Design fabrication; material investigation; industry collaboration; architecture; industrial design
series	CAADRIA
email	wfok@alumni.princeton.edu
last changed	2022/06/07 07:51

_id	sigradi2012_218
id	sigradi2012_218
authors	Perelli, Bruno; Zorzano, Osvaldo
year	2012
title	LEGO como herramienta de introducción a la enseñanza del 3D [LEGO as a tool to introduce the 3d teaching]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 547-549
summary	This article is the result of work done by students in the career of Design at the Universidad de Chile, who used the toy LEGO to understand the phenomena related to the 3D design of a practical, simple and fun, but eminently purposes professionals.
keywords	3D, LEGO® fabricación, digital, diseño
series	SIGRADI
email	bperelli@uchilefau.cl
last changed	2016/03/10 09:57

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email	guilherme_pinto1@hotmail.com
last changed	2013/10/07 19:08

_id	ecaade2012_124
id	ecaade2012_124
authors	Wierzbicki-Neagu, Madalina ; Silva, Clarence Wilfred de
year	2012
title	Application of Fuzzy Logic for Optimizing Foldable Freeform Geometries: An example of a practical application – a foldable window shade
doi	https://doi.org/10.52842/conf.ecaade.2012.1.709
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 709-717.
wos	WOS:000330322400075
summary	This paper concerns the current discourse on computer-aided design tools for architectural design. There are drawbacks of purely analytic design tools which hinder a system-level, end-effect oriented ideation. For instance, most freeform quadrilateral meshes are fully constrained and therefore not capable of folding. They can only fold under special circumstances – when their geometry satisfi es the conditions of over-constrained kinematics. However, such intent of folding cannot be captured using simple modeling based on parameters and constraints. Furthermore, algorithmization of mesh kinematics using formulas is infl exible, it cannot handle topological variations, and it inhibits the interactive control of the model. In this paper, a fuzzy logic algorithm which uses a goal-oriented, human-like reasoning to control the parametric model is proposed. The algorithm applies easily observable behaviors of the geometry to adjust the selected patches until the entire shell can be folded. The algorithm relies on designer-observable characteristics of motion rather than on formulaic representations. Such approach directs the designers’ focus on the desired outcome while avoiding the drawbacks of analytic modeling of complex kinematics.
keywords	Folding structures; fuzzy logic; intent-driven design; freeform quadrilateral mesh
series	eCAADe
email	madalina@interchange.ubc.ca
last changed	2022/06/07 07:57

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
doi	https://doi.org/10.52842/conf.caadria.2012.183
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email	cbeorkrem@uncc.edu
last changed	2022/06/07 07:54

_id	ecaade2012_058
id	ecaade2012_058
authors	Bus, Peter
year	2012
title	Emergence as a Design Strategy in Urban Development: Using Agent-Oriented Modelling in Simulation of Reconfiguration of the Urban Structure
doi	https://doi.org/10.52842/conf.ecaade.2012.1.599
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 599-605
wos	WOS:000330322400062
summary	Agent-oriented modelling is one of the simulation methods for emergent behavior of a complex system that could be considered for application of urban city structures. Using advanced script techniques, the behavior and evolution of structures in the bottom-up strategies for the development of environment could be simulated in architecture and urbanism as well. The paper presents a research subproject in the area of verifi cation of the processes of spatial and social interaction of the agents according to the logic of defined intrinsic rules of Swarm behavior in the simulation model of the selected area. The research builds mainly upon two selected requirements of the bottom-up strategy: the approach distances to places of interest and mutual standoff distances between urban elements.
keywords	Emergence; simulation; self-organization process; agent-oriented modelling
series	eCAADe
email	buspeter@fa.cvut.cz
last changed	2022/06/07 07:54

_id	ecaade2012_043
id	ecaade2012_043
authors	Chase, Scott ; Scopes, Lesley
year	2012
title	Cybergogy as a framework for teaching design students in virtual worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.1.125
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 125-133
wos	WOS:000330322400012
summary	In recent years, 3D virtual worlds have been explored for design teaching, yet it is unclear whether a specifi c pedagogy is used or adapted for such activities. Here we describe the pedagogical model of Cybergogy of Learning Archetypes and Learning Domains, developed specifically for teaching in 3D immersive virtual worlds, and its application to introductory building classes in the virtual world Second Life for architectural design students and teachers as part of the ARCHI21 project.
keywords	Architectural education; Cybergogy; language learning; virtual worlds; Second Life
series	eCAADe
email	scha@create.aau.dk
last changed	2022/06/07 07:55

_id	ecaade2012_273
id	ecaade2012_273
authors	Correia, Rodrigo ; Duarte, José ; Leitao, António
year	2012
title	GRAMATICA: A general 3D shape grammar interpreter targeting the mass customization of housing
doi	https://doi.org/10.52842/conf.ecaade.2012.1.489
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 489-496
wos	WOS:000330322400050
summary	This paper presents a general 3D shape grammar interpreter named GRAMATICA and illustrates its use for the implementation of several shape grammars, including the one used in the design module of a specifi c shape grammar for mass-customized housing, called DESIGNA. The underlying shape representation, generation and control are discussed. The resulting shape grammar interpreter tries to support designers’ ways of thinking and working by acting as a bridge between shape grammars, the formalism that captures a design process, and a CAD application, for post-processing the computed design. This bridge is implemented by Rosetta, which ensures portability among different CAD applications.
keywords	Grammar interpreters; mass customization; housing; Malagueira; Siza
series	eCAADe
email	rodrigo.correia@ist.utl.pt
last changed	2022/06/07 07:56

For more results click below: