Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2012_116
id	caadria2012_116
authors	Peña de Leon, Alexander
year	2012
title	Rationalisation of freeform façades: A technique for uniform hexagonal panelling
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 243–252
doi	https://doi.org/10.52842/conf.caadria.2012.243
summary	This paper is an account of the façade rationalisation strategy developed at Gehry Technologies for mitigating the tradeoffs between project constructability and the aesthetic implications of arranging flat panels over a complex surface. The strategy outlined was developed as the result of the digital building delivery of the Museo Soumaya façade in Mexico City designed by Fernando Romero LAR. This report documents the development process of a method for obtaining relevant construction information flows enabling the assembly of the façade system by a third-party sub-contractor in support of the façade system coordination. This report concludes on a method using bespoke software for extending the parametric modelling system Digital Project™ in the design support role of obtaining an aesthetically pleasing arrangement of flat hexagonal panels over a freeform surface.
keywords	Sphere packing; façade rationalisation; hexagonal tiling; parametric design; k-means clustering
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2012_316
id	ecaade2012_316
authors	Pena de Leon, Alexander
year	2012
title	Two Case-Studies of Freeform-Facade Rationalization
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 501-509
doi	https://doi.org/10.52842/conf.ecaade.2012.2.501
wos	WOS:000330320600053
summary	This paper will demonstrate two effective facade rationalisation patterns developed at Gehry Technologies for mitigating the tradeoffs between project constructability constraints vs. project aesthetic constraints. The two Case-Studies will present, fi rstly a method for dealing with large amounts of component instantiations and second with the economical delivery of complex project geometry through panelling. Both projects use design technology as a strategy for the integration of specialized knowledge and trades, through an effective use of information technology. The Case Studies will present the development of the Gridshell Digital Mock-Up of the Yas Island Marina Hotel in Abu Dhabi designed by Asymptote Architects and secondly the Museo Soumaya facade system in Mexico City designed by Fernando Romero LAR. This document will report the development process for obtaining relevant construction information, essential for the assembly of the facade systems by a third-party sub-contractor in support of the facade system coordination. The report concludes on the implementations of bespoke tools in support of the coordination and geometry description tasks. The tailored tool making process extends the parametric modelling system Digital Project™ in the design support role of obtaining aesthetically pleasing decompositions of the buildings Master Design Surface MDS into feasible constructible components.
keywords	Facade Rationalization; Integration; Parametric Design; K-means Clustering
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2012_045
id	caadria2012_045
authors	Khoo, C. K. and F. D. Salim
year	2012
title	A responsive morphing media skin
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 517–526
doi	https://doi.org/10.52842/conf.caadria.2012.517
summary	Existing media façades do not function as fenestration devices. They have been used mainly for visual communication and aesthetic purposes. This paper introduces a responsive morphing skin that can act as an active fenestration device as well as a media skin. We investigate new possibilities of using form-changing materials in designing responsive morphing skins that respond to environmental conditions and act as a communicative display. The design experiment that embodied this investigation, namely Blind, serves as a new layer of analogue media brise-soleil for existing space. It communicates the relationships between interior and exterior spaces visually and projects mutable imageries to the surrounding environment through sunlight. The design process of Blind simulates the responsive behaviour of the intended architectural skin by integrating physical computing and parametric design tools. This process includes the integration of soft apertures and architectural morphing skin to introduce a novel design method that enables an architectural skin to be a means of communication and fenestration. It responds to changing stimuli and intends to improve the spatial quality of existing environments through two types of transformations: morphological and patterned.
keywords	Media façades; elasticity; responsive architecture; formchanging materials; kinetic skin
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_91
id	ecaade2012_91
authors	Khoo, Chin Koi
year	2012
title	Sensory Morphing Skins
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 221-229
doi	https://doi.org/10.52842/conf.ecaade.2012.2.221
wos	WOS:000330320600022
summary	Contemporary responsive architecture often tries to achieve optimised building performance in response to changing environmental conditions. In the precedents a key area of responsiveness is in the building façades or skins. Often however, the skin is made from discrete components and separated equipment. T his research explores the potential for designing responsive architectural morphing skins with kinetic materials that have integrated sensing and luminous abilities. Instead of embedded individual discrete components, this approach intends to integrate the sensing devices and building skins as one ‘single’ entity. This investigation is conducted by project. The project is Blanket, which aims to provide an alternative approach for a lightweight, fl exible and economical sensory architectural skin that respond to proximity and lighting stimuli.
keywords	Sensing; responsive; morphing skin; kinetic and phosphorescence materials
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2012_058
id	caadria2012_058
authors	Matthews, Linda and Gavin Perin
year	2012
title	Materialising the pixel: A productive synergy
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 475–484
doi	https://doi.org/10.52842/conf.caadria.2012.475
summary	The composite photoreceptive field of the human eye receives photons emitted from a source and converts this energy into image information within the brain. The internal mechanisms of the contemporary camera imaging technologies represent yet another in a long history of attempts to technically replicate this procedure. The critical difference between the capacity of the human eye to receive quanta events or photons and that of a camera transmitting to a digital display device, rests in how much of the original signal can be recovered. This paper aims to show how the ‘information deficit’ associated with this technological conversion can be enhanced by the deliberate exploitation and re-arrangement of the camera’s image sensor mechanism. The paper will discuss how the mapping of pixel grid geometries and colour filter array patterns at the vastly increased scale of building façades, imparts a materiality to urban form that modifies the visibility and performance of the corresponding virtual screen image. The exploration of the material adaptation of pixel geometries leads to a new technique that extends the working gamut of pixel-based RGB colour space and both establishes an index to develop material performance criteria and modifies the limitations of traditional viewing technologies.
keywords	Pixels; sensor; CCTV; imaging; array; façades
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2012_275
id	ecaade2012_275
authors	Sharaidin, Kamil; Burry, Jane; Salim, Flora
year	2012
title	Integration of Digital Simulation Tools With Parametric Designs to Evaluate Kinetic Façades for Daylight Performance
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-709
doi	https://doi.org/10.52842/conf.ecaade.2012.2.701
wos	WOS:000330320600075
summary	This research presents a solution for evaluation of kinetic façades system performance via experiences and lessons learnt from experiments. We bridge between architects and engineers to address limitations associated with incorporating performance criteria in the design of kinetic façades by integrating different simulation tools. The experiments focus on optimization of the daylight performance through the design and motion of kinetic façades using various integrated software. The research is developed using real time data feedback processed through various digital tools from three domains: (1) Architectural design, (2) day-lighting performance and (3) parametric design computation. From the evaluations, the paper demonstrates the analysis of kinetic motion for daylight optimization at the early design stage and suggests possible configurations for daylight performance.
keywords	Kinetic façades; digital simulations; design considerations; early design stage
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_021
id	ecaade2012_021
authors	Sun, Chengyu ; Lu, Junchao ; Zhao, Qi
year	2012
title	Study on an Architect-Oriented Workflow for Freeform Surface Design Tools
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 517-523
doi	https://doi.org/10.52842/conf.ecaade.2012.1.517
wos	WOS:000330322400053
summary	For most architects, it is not easy to transform their freeform designs into buildable constructions without precise knowledge on a specifi c material and its construction process.A workfl ow is introduced in this paperand it could be adopted by architects concerning the works of predicting the tiling results in the earliest design stage.The workfl ow involves pre-processing which could help architects design rational surfaces, thus saving a lot of work in the paneling process later on. The physically based modeling engine will simulate the constraints of a pre-selected material and therefore ensures a feasible result. The post-process involves visual feedback of the result as well as data formatting which help to establish a seamless connection between construction processes.
keywords	Pre-process; material specification; construction simulation; evaluation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201210407
id	ijac201210407
authors	Dritsas, Stylianos
year	2012
title	Design-Built Rationalization Strategies and Applications
source	International Journal of Architectural Computing vol. 10 - no. 4, 575-594
summary	Rationalisation of architectural design is paramount to manufacturing and its construction. This paper presents a methodology of rationalisation of building envelope geometry. We discuss methods for understanding and addressing design complexity; review two theoretical models of rationalisation: the pre-rational and post-rational design principles; illustrate their benefits and limitations and demonstrate their meeting point proposing an integrated performance-oriented model for analysis and design of building envelopes, using digital design techniques.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2012_272
id	sigradi2012_272
authors	Amindarbari, Reza
year	2012
title	Morphological indicators of solar exposure
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 414-418
summary	This paper investigates the relation between the shading condition and geometrical configuration of neighborhood-scale developments. It introduces a straightforward method for measuring shadow areas casted on buildings’ roofs and facades – in urban areas – using digital 3D models. Employing this method for measuring shadow areas in nine neighborhoods in Jinan, China, at six different time points on summer and winter solstices – a total of 54 sample measurements – this study develops two regression models that reveal the significant dependency of the in-shadow percentage of buildings’ façade and roof areas to the building volume density (BVD) and height irregularity (HI) of the urban fabric.
keywords	urban form, geometrical configuration, solar exposure, shadow area
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
wos	WOS:000330320600047
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_130
id	ecaade2012_130
authors	Beirão, José ; Arrobas, Pedro ; Duarte, José
year	2012
title	Parametric Urban Design: Joining morphology and urban indicators in a single interactive model
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp.167-175
doi	https://doi.org/10.52842/conf.ecaade.2012.1.167
wos	WOS:000330322400016
summary	A parametric urban design system integrating GIS data in a CAD environment is proposed as a platform for discussing urban plans providing flexibility and information access in an interactive fashion. The proposed system links calculations of urban indicators with the parameter manipulation of the layout geometry, therefore allowing for a systematic update of indicators according to design modifi cations. Hence, design may be fine-tuned in an informed manner enhancing the quality of design decisions.
keywords	Parametric urban design; density studies; design methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_145
id	sigradi2012_145
authors	Beirão, José Nuno
year	2012
title	Minha Casa Minha Vida – a critical perspective; Possible alternatives and improvements
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 657-660
summary	This paper exposes a criticism on the Brazilian social housing program “Minha Casa Minha Vida” (MCMV) and provides a few strategies for improving results. The role of new technologies is addressed as a way of enhancing the results of those strategies.
keywords	Housing; Design process; New production systems
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_231
id	acadia12_231
authors	Bell, Brad
year	2012
title	Parametric Precast Concrete Panel System
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 231-238
doi	https://doi.org/10.52842/conf.acadia.2012.231
summary	The working hypothesis of this research focuses on the potential of utilizing a digital toolset to engage information within a surrounding context for the purpose of creating a more intelligent pre-cast concrete panel system. The Parametric Pre-Cast Concrete Panel System is a research project attempting to parametrically define geometry for the purpose of producing formwork based on quantitative information related to issues such as environmental control systems, sound abatement, as well as qualitative information like non-standard variation paneling, and aesthetic composition.
keywords	Energy , form , structures , performance , simulation , prototyping , precast , concrete
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
doi	https://doi.org/10.52842/conf.caadria.2012.527
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2012_024
id	caadria2012_024
authors	Brell-Cokcan, Sigrid; Johannes Braumann, Baris Cokcan and Martin Kleindienst
year	2012
title	Just in time design: Developing parametric design tools for architectural design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 455–464
doi	https://doi.org/10.52842/conf.caadria.2012.455
summary	In this paper we will present custom design and parametric programming strategies for the design of complex spatial structures based on our applied research for a 10.000 m² freeform technology centre in Düzce, Turkey. The goal is to develop intuitive, easy-to-use parametric design components for layout, analysis, optimisation and aesthetic architectural free form design.
keywords	Parametric design; freeform architecture; quadrilateral meshes; software development; fabrication
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_058
id	ecaade2012_058
authors	Bus, Peter
year	2012
title	Emergence as a Design Strategy in Urban Development: Using Agent-Oriented Modelling in Simulation of Reconfiguration of the Urban Structure
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 599-605
doi	https://doi.org/10.52842/conf.ecaade.2012.1.599
wos	WOS:000330322400062
summary	Agent-oriented modelling is one of the simulation methods for emergent behavior of a complex system that could be considered for application of urban city structures. Using advanced script techniques, the behavior and evolution of structures in the bottom-up strategies for the development of environment could be simulated in architecture and urbanism as well. The paper presents a research subproject in the area of verifi cation of the processes of spatial and social interaction of the agents according to the logic of defined intrinsic rules of Swarm behavior in the simulation model of the selected area. The research builds mainly upon two selected requirements of the bottom-up strategy: the approach distances to places of interest and mutual standoff distances between urban elements.
keywords	Emergence; simulation; self-organization process; agent-oriented modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_479
id	acadia12_479
authors	Castorina, Giulio
year	2012
title	Performative Topologies: An Evolutionary Shape Optimization Framework for Daylighting Performance Coupling a Particle-Spring System With an Energy Simulation Tool
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 479-490
doi	https://doi.org/10.52842/conf.acadia.2012.479
summary	This paper develops a methodological approach for use in design practice which combines an external simulation tool (EnergyPlus™) with an evo-lutionary optimisation strategy for the form-finding of complex fenestra-tion systems. On one hand, based on previous research, it presents a novel approach for the shape morphogenesis that exploits a generative algorithm technique to control a limited set of parameters whilst on the other hand it facilitates the integration of a simulation tool capable of handling increasing levels of complexity with greater data interoperabil-ity. In doing so it will argue the heuristic potential of the proposed meth-od in aiding the designers’ decision making whilst increasing the formal possibilities of their final design solutions.
keywords	Performance-based design , Genetic Algorithm (GA) , daylighting simulation , shape optimisation , decision support system (DSS)
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	sigradi2012_170
id	sigradi2012_170
authors	De Martino, Jarryer Andrade; Celani, Gabriela
year	2012
title	O Algoritmo Evolutivo como método projetual [The Evolutionary Algorithm as design method]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 570-574
summary	The evolutionary algorithm contributes significantly to the search for solutions to difficult problems of understanding and problems that have more than one solution, and all of which are satisfactory. This method is used by some architects as an optimization technique for design process; furthermore it is a possibility to obtain solutions which may not have been imagined by the designer. The aim of this article is to introduce the main concepts of evolutionary algorithm and to explain its structure. The article ends with example of the application of evolutionary algorithms in solving design problems.
keywords	algoritmo evolutivo; método de projeto; diversidade.
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: