Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 440

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2012_234
id	ecaade2012_234
authors	Pak, Burak ; Newton, Caroline ; Verbeke, Johan
year	2012
title	Virtual Worlds and Architectural Education: A Typological Framework
doi	https://doi.org/10.52842/conf.ecaade.2012.1.739
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 739-746.
summary	This study introduces a conceptual analysis, a typological framework which aims to map a wide array of possible virtual worlds into a larger frame and explore their signifi cance for architectural education. Using this analysis, we discuss the properties of virtual worlds in four groups: “the real virtual, virtual augmented real, real augmented virtual and fantastic virtual”. Based on these, we propose four different strategies for integrating virtual worlds into architectural education. Overall, this contribution can be seen as a small step towards the revitalization of the architectural design curriculum.
wos	WOS:000330322400078
keywords	Virtual Worlds; Architectural Education; Reality-virtuality Continuum; Simulacrum
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2012_094
id	caadria2012_094
authors	Roupé, Mattias; Mikael Johansson, Mikael Viklund Tallgren and Mathias Gustaffson
year	2012
title	Using the human body as an interactive interface for navigation in VR models
doi	https://doi.org/10.52842/conf.caadria.2012.079
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 79–88
summary	The use of Virtual Reality (VR) and interactive real-time rendering in urban planning and building design are becoming more and more common. However, the integration of VR in the urban planning process suffers from the complicated interaction handling of the virtual environment. In particular, people unfamiliar to gaming environments and computers are less prone to interact with a VR visualisation using keyboard and mouse as controlling devices. This paper addresses this issue by presenting an implementation of the XBOX 360 Kinect sensor system, which uses the human body to interact with the virtual environment. This type of interaction interface enables a more natural and user-friendly way of interacting with the virtual environment. The validation of the system shows that respondents perceived the interface as non-demanding and easy to use. The implemented interface to switch between different architecture proposals gave a better understanding and spatial reasoning for the respondent. The study also shows that males perceived the system as more demanding than females. The users also associated and compared their body with virtual environment, which could indicate that they used their body during spatial reasoning. This type of spatial reasoning has been agued to enhance the spatial-perception.
keywords	Virtual reality; XBOX Kinect; perception; navigation
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2012_216
id	sigradi2012_216
authors	Atenas, Bárbara; Rojas, Francisco; Rojas, Jorge
year	2012
title	Realidades Cruzadas y su aplicación en el Diseño Industrial [Industrial Design aplication of Mixed reality]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 598-601
summary	This research seeks to establish guidelines for a model to take advantage of AR as a tool in the process of developing new products in the formative stages of the design professional. For this it is necessary to determine in which part of the design process the use of these guidelines creates a greater impact in terms of time, money and results, later to define relationships between the guidelines found and generate schemes to visualize relationships, delivering a tool that can be used by students in their design processes.
keywords	Augmented Reality, Design, Education, Industrial Design, Design Process
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_5
id	ecaade2012_5
authors	Biloria, Nimish; Chang, Jia-Rey
year	2012
title	HyperCell: A Bio-Inspired Information Design Framework for Real-Time Adaptive Spatial Components
doi	https://doi.org/10.52842/conf.ecaade.2012.2.573
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 573-581
summary	Contemporary explorations within the evolutionary computational domain have been heavily instrumental in exploring biological processes of adaptation, growth and mutation. On the other hand a plethora of designers owing to the increasing sophistication in computer aided design software are equally enthused by the formal aspects of biological organisms and are thus meticulously involved in form driven design developments. This focus on top-down appearance and surface condition based design development under the banner of organic architecture in essence contributes to the growing misuse of bio-inspired design and the inherent meaning associated with the terminology. HyperCell, a bio-inspired information design framework for real-time adaptive spatial components, is an ongoing research, at Hyperbody, TU Delft, which focuses on extrapolating bottom-up generative design and real-time interaction based adaptive spatial re-use logics by understanding processes of adaptation, multi-performance and self sustenance in natural systems. Evolutionary developmental biology is considered as a theoretical basis for this research.
wos	WOS:000330320600061
keywords	Adaptation; Swarms; Evo-Devo; Simulation: Cellular component
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_100
id	ecaade2012_100
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2012
title	Real-Time Robot Simulation and Control for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2012.2.479
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 479-486
summary	Industrial robots for architectural fabrication have not yet been directly linked to the design process, as current research focuses mostly on the automated generation of robot control data for mass customization. In this paper, we will discuss the use of a real-time programming environment for robot simulation/control and introduce a virtual robot, that allows architects to digitally prototype fabrication processes. While such a real-time approach is also suitable for mass customization, the main advantage is that this interaction with the virtual-robot can be used to intuitively solve complex fabrication problems.
wos	WOS:000330320600050
keywords	Industrial Robots; Inverse Kinematics; Virtual Robot; Mass Customization; Simulation; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
doi	https://doi.org/10.52842/conf.acadia.2012.127
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_127
id	ecaade2012_127
authors	Burry, Jane; Goscinski, Wojec; Aranda-Mena, Guillermo; Alhadidi, Suleiman; Pena de Leon, Alex; Williams, Mani
year	2012
title	Trade Off and Real Time Analysis Feedback for Designers: Sailing as a Research Vehicle for Developing Systems and Skills
doi	https://doi.org/10.52842/conf.ecaade.2012.2.543
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 543-550
summary	This paper describes the investigation and outcomes of a workshop aiming to answer the dual questions of how best to link technologies and how best to harness expert knowledge to capture and integrate dynamic performance feedback in the design process. In order to focus on these intrinsic questions, the workshop moved outside the domain most familiar to most of the participants, the built environment, and introduced the participants to design and performance feedback for what, to most, was the new domain of sailing and sail design. It resulted in novel and valuable prototypical systems for analysis and feedback to inform immediate design iteration. It achieved this through problem decomposition and synthetic design activity engaging integrated models and prototypes with components from multiple players and sources of informed or expert knowledge or knowing.
wos	WOS:000330320600057
keywords	Design feedback; nested systems; sailing; interaction design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_325
id	acadia12_325
authors	Chronis, Angelos ; Tsigkari, Martha ; Davis, Adam ; Aish, Francis
year	2012
title	Design Systems, Ecology, and Time Angelos Chronis, Martha Tsigkari, Adam Davis, Francis Aish"
doi	https://doi.org/10.52842/conf.acadia.2012.325
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 325-332
summary	Discussion of architecture in ecological terms usually focuses on the spatial and material dimensions of design practice. Yet there is an equally critical temporal dimension in ecology that is just as relevant to design. At the micro scale is the question of 'real time' feedback from our design systems. At the macro scale is the issue of sustainability, in other words long term -- and potentially disastrous -- feedback from terrestrial ecosystems. In between are numerous different units for quantizing time in design and computation. In this paper, we examine some of these units -- 'real time', 'design time', 'development time' -- to suggest how they interact with the ecology of design technology and practice. We contextualize this discussion by reference to relevant literature from the field of ecology and to our work applying custom design and analysis tools on architectural projects within a large interdisciplinary design practice.
keywords	real time feedback , performance driven design , integration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_197
id	ecaade2012_197
authors	ElBanhawy, Eiman Y. ; Dalton, Ruth ; Thompson, Emine Mine ; Kottor, Richard
year	2012
title	Real-Time Electric Mobility Simulation in Metropolitan Areas. A case study: Newcastle-Gateshead
doi	https://doi.org/10.52842/conf.ecaade.2012.1.533
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 533-546
summary	This paper discusses the potential of emerging digital representations of built environments coupled with agent-based modelling (ABM). A new set of urban transportation data is provided as an input which is the electric vehicles (EVs) population of one of the UK metropolitan areas. The study is a part of a PhD research that focuses on investigating computer-aided software to develop a virtual route for electric mobility in the North Sea Region. An overview of agent-based simulation platforms is discussed. Electric mobility system has particular paradigms that differ from conventional urban transport systems; a comparison is presented followed by the recommended approach of integrating the two techniques (visualization and simulation). Finally, the architecture of agents’ algorithm within the EVs network is presented through a case study of virtual Newcastle-Gateshead model.
wos	WOS:000330322400055
keywords	E-mobility; electric vehicles; simulation; agent based modelling; virtual city models
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2012_109
id	caadria2012_109
authors	Gerber, David; Mohamed M. ElSheikh and Aslihan Senel Solmaz
year	2012
title	Associative parametric design and financial optimisation - 'Cash Back 1.0': Parametric design for visualising and optimising Return on Investment for early stage design decision-making
doi	https://doi.org/10.52842/conf.caadria.2012.047
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 47–56
summary	Cash-Back 1.0 presents research on the development of methodologies and technologies to simulate the cause and effect of early stage geometric design alternatives of buildings and the real time results upon financial pro-forma. Through the encoding of design rules and their associative relationships to financial pro-forma the research illustrates enhanced visualization of early stage building design decisions and their cumulative impact on financial goals and constraints. The research presents value an associative parametric design process affords often-disparate domains through correlation and visualization. The paper describes incorporation of a feedback loop between pro-forma and geometric models in conjunction with an optimization method. Given the level of uncertainty in early stage design decision making the research contributes partial solutions to the domain problems of design decision uncertainty and design cycle latency and is further argumentation for increased use of parametric design methods and automation to support design domain integration.
keywords	Parametric design; genetic algorithm; design decision support; multi domain optimisation; domain integration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2012_011
id	ascaad2012_011
authors	Hemsath, Timothy L.
year	2012
title	Hybridizing Digital Fabrication Techniques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 103-114
summary	The use of digital fabrication in the production and making of architecture is becoming a prevalent vehicle for the design process. As a result, there is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, parametric modeling and digital fabrication in student education. This paper will highlight three student projects that look to ingrate computational prototyping with digital fabrication techniques in the production of architecture. The goal is to hybridize fabrication techniques of sectioning, tessellating and folding to educate students in CAD, CAM, parametric modeling and digital fabrication. Rather than repeating conventional approaches or recreating from precedent, mixing techniques challenges students to understand the CAD technique or parameters for modeling, translate for CAM production and deal with real world constraints of materials, time and tectonics. In the end, these projects are critical of the digital and projectively speculate on the architectural detail in an age of digital ubiquity.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_011.pdf
last changed	2012/05/15 20:46

_id	ijac201210106
id	ijac201210106
authors	Henriques, Goncalo Castro
year	2012
title	TetraScript: A Responsive Pavilion, From Generative Design to Automation
source	International Journal of Architectural Computing vol. 10 - no. 1, 87-104
summary	This research is part of a broader investigation into the use of digital technologies in the Architecture, Engineering and Construction (AEC) sector. The intention is to improve the ability of buildings to respond to context by proposing a skylight system that can adjust to external environmental conditions and internal functional demands. We call this responsive ability customisation. The proposed skylight system can adapt to different geometries, uses, locations, times of day and other contextual conditions. Customisation can be achieved by static and dynamic processes. Static customisation is achieved during the design process by selecting the form and size of the building, as well as the number, arrangement and size of the skylights, among other features. Dynamic customisation is accomplished after construction by changing the skylight aperture in real-time to control interior conditions. This paper focuses on the static process to find an adequate skylight configuration for a case-study pavilion.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_095
id	caadria2012_095
authors	Johansson, Mikael and Mattias Roupé
year	2012
title	Real-time rendering of large building information models: Current state vs. state-of-the-art
doi	https://doi.org/10.52842/conf.caadria.2012.647
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 647–656
summary	With the use of Building Information Models (BIM), real-time 3D visualisations have become a natural tool in order to communicate ideas and share information between all involved parties in a project. Currently, several different BIM viewers are available for the purpose of interactive presentations and design reviews. However, as BIMs become larger and more detailed, it provides a challenge for available software solutions to manage them interactively. In this paper we present our findings from analysing three commonly used BIM viewers - Tekla BIMSight, Autodesk Navisworks and Solibri Model Viewer - in terms of real-time rendering performance. In addition we have developed a prototype BIM viewer to test modern approaches for efficient real-time rendering. Specifically, we have implemented the latest version of the Coherent Hierarchical Culling algorithm. Our results show that existing BIM viewers all share limitations in their ability to handle large and complex BIMs interactively. However, for the same test models, our prototype BIM viewer enables smooth real-time performance with no visual artefacts. The results from our tests thus shows that the technology to enable correct real-time rendering of large and complex BIMs is already accessible, but are currently not utilised by any of the tested BIM viewers.
keywords	3D graphics; BIM; real-time rendering
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_83
id	ecaade2012_83
authors	Jones, Paulo; Eloy, Sara; Ricardo, Rui; Dias, Miguel Sales
year	2012
title	Architectural Rehabilitation and Conservation Processes Informed by Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2012.2.411
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 411-418
summary	The goal of the presented research is to explore human-machine interaction and to study how Augmented Reality (AR) may be a potential tool to inform Architectural Rehabilitation and Conservation processes. Nowadays obtaining data to inform both marchitecture projects and real estate investments is a very bureaucratic process. City councils technicians suffers from the same diffi culties when are in fi eldwork to do inspections and lack a complete sort of information. This proposal considers that the use of mobile technologies as smart phones and tablets can empower these technicians to obtain building related data. The specifi c goal of the study aims to develop a data model and an interface that can be made available to professionals which allows an efficiently reply to the user’s needs as the system enables the gathering of updated information considering a particular building.
wos	WOS:000330320600043
keywords	Augmented reality; interface; architecture; rehabilitation; data
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2012_038
id	caadria2012_038
authors	Kato, Kody and Hyoung-June Park
year	2012
title	Toward a performance-oriented architecture: An integrated design approach to a real time responsive structure
doi	https://doi.org/10.52842/conf.caadria.2012.059
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 59–68
summary	This paper started from the study of “performance-oriented architecture” for the purpose of developing a real time responsive prototype that can enclose large expansive interior space. Questions regarding the relationship between the structural arrangement of systems and the natural environment initiated an investigation in Phyllotaxis. It has been found in plant systems for the optimisation of photosynthesis with harvesting maximum amounts of solar energy. In the design of a real time responsive prototype, an algorithmic approach is introduced with the mathematical interpretation of Phyllotaxis and its translation into the global geometry of the prototype. Also, the usage of a Voronoi diagram is parametrically configured to form the local geometry of the prototype. The interactive mechanism of the prototype was achieved with an assorted computational application. Furthermore, with the demonstration of the aforementioned prototype in both digital and physical environments, its implementation process is explained.
keywords	Performance-oriented architecture; phyllotaxis; Voronoi diagram; real-time-responsive structure
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia12_97
id	acadia12_97
authors	Lilley, Brian ; Hudson, Roland ; Plucknett, Kevin ; Macdonald, Rory ; Cheng, Nancy Yen-Wen ; Nielsen, Stig Anton ; Nouska, Olympia ; Grinbergs, Monika ; Andematten, Stephen ; Baumgardner, Kyle ; Blackman, Clayton ; Kennedy, Matthew ; Chatinthu, Monthira ; Tianchen, Dai ; Sheng-Fu, Chen
year	2012
title	Ceramic Perspiration: Multi-Scalar Development of Ceramic Material
doi	https://doi.org/10.52842/conf.acadia.2012.097
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 97-108
summary	Ceramic building material is a useful passive modulator of the environment. The subject area is based on traditional cultural and material knowledge of clay properties: from amphora to rammed earth building; and ranges to present uses: from desiccants and space shuttle tile patterns to bio-ceramics. The primary consideration is to control material density and porosity in a tile component, in response to specific environmental conditions. This depends on a number of key physical principles: the ability of the material to absorb thermal energy, the ability to absorb and then ‘wick’ moisture within the pore structure, and the decrement factor or ‘time lag’ of the effect. The interplay between these properties point to the importance of directionality in the porous microstructure, at the boundary layer. Material characteristics have been investigated in the laboratory at a micron scale and in the ceramics workshop at full scale, with some interplay between the two. Recent work done on monitoring has led to the development of software tools that allow feedback (approaching real time)- a visual representation of the dynamic thermal and hygrometric properties involved.
keywords	Synthetic tectonics , composite materials , smart assemblies , emerging material processes , Responsive environments , sensing , real-time computation , feedback loops , Information Visualization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2012_189
id	ecaade2012_189
authors	Lonsing, Werner
year	2012
title	The Infliction of Reality Upon Virtual Architectural Models
doi	https://doi.org/10.52842/conf.ecaade.2012.2.385
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 385-389
summary	The inevitable and obvious distinction between virtual and real worlds is a result of an assumption, that objects in computation are either digital or not. With new concepts like Mixed- or Augmented-Realities this simple standardized differentiation has become questionable. The infl iction of real objects upon virtual models can not be ignored.
wos	WOS:000330320600040
keywords	Augmented Reality; Mixed Reality, Post Desktop Era; Human User Interface
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia12_401
id	acadia12_401
authors	Mehann, Ryan ; Sher, Elite
year	2012
title	An Exploration Into Computational Optimization for Motive Architecture
doi	https://doi.org/10.52842/conf.acadia.2012.401
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 401-405
summary	This paper explores the potential of advanced computational methods for architecture. An experiment has been conducted with the aim of applying a computer driven optimization process on the motive behavior of a physical prototype. The choice of the mechanism is arbitrary, and this is to convey that the adaptive behavior of a structure in real time may be improved with the appropriate computational methods, regardless of its mechanical complexity. This provides architects with the opportunity to bring previously static architectural concepts into motion. The paper looks into the fields of embodied AI and mobile robotics research as resources for knowledge on the notions of integrating evolutionary computation into physical artifacts.
keywords	Computational Optimization , genetic Algorithms , Adaptive Architecture , Kinetic Architecture , Mobile Robotics
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:58

_id	ecaade2008_190
id	ecaade2008_190
authors	Russell, Peter; Elger, Dietrich
year	2008
title	The Meaning of BIM
doi	https://doi.org/10.52842/conf.ecaade.2008.531
source	Architecture in Computro [26th eCAADe Conference Proceedings / ISBN 978-0-9541183-7-2] Antwerpen (Belgium) 17-20 September 2008, pp. 531-536
summary	The paper is a position paper, not a report about a research project. It concerns the paradigm-shift that is taking place in the CAAD software and its implications for the business of architecture and more importantly, for the education of future members of the profession. Twenty years ago the use of CAAD software as a replacement for hand drafting was starting. Since then the transformation is complete: hardly a final project in the universities is drawn by hand. Currently, we are witnessing a second paradigm shift and its name is BIM. The meaning of BIM is rooted in two significant differences to current CAAD software and this will have implications for teaching and practicing architecture. The first difference is the way the software structures information in the CAAD file. The standard way to save CAAD information was to organise simple geometric objects according to membership in groups and to sort them according to a layer-metaphor, which primarily controlled the visibility of the geometric elements. Three-dimensional modelling is/was nothing more than the same structure with a more complex geometry. BIM software changes this structure by storing classes of geometries and then to store the specific values of individual geometries according to factors that can be determined by external or internal logical factors. The implication for architects is that we have the chance to be the people in control of the building information model, so long as we invest the time and energy to fully understand what is happening to the building information during the planning process. If we ignore this, the real danger exists that the last control of the building’s final configuration will be usurped. As educators we are currently teaching students that will be leaving the schools in 2012 and beyond. By then, the paradigm-shift will be in full motion and so it behoves us to consider which skill sets we want the next generation of architects to possess. This means not just teaching students about how to use particular BIM software or how to program a certain parametric/genetic algorithm in a form-finding process. We need to teach our students to take the leadership in building information management and that means understanding and controlling how the building information flows, how the methodologies that are used by the consulting engineers affect our building models, and knowing what kind of logical inconsistencies (internal or external) can threaten the design intention.
keywords	Building Information Modelling, Digital Curriculum, Architectural Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: