Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 547

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2012_074
id	caadria2012_074
authors	Markova, Stanimira and Andreas Dieckmann
year	2012
title	An IFC based design check approach for the optimisation of material efficiency in the built environment
doi	https://doi.org/10.52842/conf.caadria.2012.275
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 275–284
summary	Compared to other industries, the built environment is still the largest and one of the least efficient consumers of resources. Existing measures and procedures for resource recovery and reuse are focused on the demolition phase, when the composition of materials and structures is mostly unknown and hard to be analysed. Therefore, these measures are somewhat inefficient for overall high-rate material recovery. The enhancement of the integrated semantic planning process by the introduction of the IFC unified data standard and BIM technology is a first-time opportunity to track, analyse, document and simulate all relevant players, parameters and processes with an impact on the resource and material efficiency through the entire life cycle of a building in the design phase of a building project. The presented work explores the potential of IFC to serve as a framework for achieving a higher material efficiency in the built environment. A proposed design check approach for the simulation and optimisation of material efficiency in a building over its life cycle is based on a system of key parameters and actions organised in logic trees. The parameters and actions are translated into IFC objects. Additionally required IFC objects and properties are identified and described.
keywords	BIM; IFC; integrative design; material efficiency design
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2012_154
id	sigradi2012_154
authors	Soares, Luiza Dacier Lobato
year	2012
title	EduCAAD: An X-ray of CAAD education in Brazil
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 255-258
summary	The present work is offers the project of an online resource for investigating the actual Brazilian academic panorama concerning CAAD education. The access to this information is given through the development of a website, which introduces the visitors to the actual Brazilian CAAD education situation, offers a questionnaire, accessible by everyone and builds up a visual information mapping the current state of CAAD education in the different regions of Brazil. The questionnaire is 14 questions long, and it’s link has been sent via email to the addresses of the Brazilian faculties of architecture, being re-directed equally both to its students’ committees and courses’ coordinators. The objective is that, at its conclusion, the access to this information will lead to a better understanding of the CAAD education in Brazil. It can motivate discussions about curricula and CAAD’s pedagogy. Through the analysis of its visualizations, maps, tables and statistics, it points special features in Brazilian education system, as well as give directions for further researches and pedagogic proposals.
keywords	panorama; CAAD education; questionnaire; data visualization
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	caadria2012_123
id	caadria2012_123
authors	Urvi, Sheth
year	2012
title	Parametricism: Indian social need in complexity and chaos
doi	https://doi.org/10.52842/conf.caadria.2012.433
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 433–442
summary	Indian society living in its physical context and administrative boundaries is complex. The contemporary built environment imitating perceived advance technology where development is purely measured by material consumption is chaos. The present approach to meet dynamic and diverse demands emerging from the complexity and economical boom is fragmented and superficial. The challenge is to find order – the hidden patterns - through an approach that analysis and interprets the complexity with the holistic vision to offer contextual variety inclusive of qualitative richness in the existing chaos. Considering that Parametricism is based on algorithms and mathematics it is generally understood as quantification where as it is also important to understand its qualitative impact. The paper is an inquiry on qualitative gains of Parametricism that helps shaping society in Indian context. This is demonstrated by bringing forward understanding on qualitative gains of Parametricism exemplified with an academic exploration and inter-relating them with Indian examples to showcase the opportunities.
keywords	Parametricism; complexity; chaos
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2012_125
id	sigradi2012_125
authors	Velasco, Maria Clara Betancourt; Alvarado, Rodrigo García; Villarreal, Lina Marcela Quintero
year	2012
title	Uso de una herramienta computacional evolutiva para el diseño y optimización de vanos residenciales en el trópico [Use of an evolutionary computational tool for the design and optimization of residential openings in the tropic]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 462-466
summary	Facades have great impact in a house´s performance being directly linked to energetic consumption and comfort. Computing sciences propose the systematization of design processes, making it possible to determine an optimal configuration for a tropical building, in order to get a desired comfort performance, based on the implementation of parametric design and artificial intelligence. This research seeks sustainable design by implementing design guidelines, geometrical parameterization and its further optimization. Now it is possible from early stages of design to provide results that can benefit people generating comfort conditions.
keywords	diseño paramétrico, algoritmos genéticos, optimización, confort, vanos
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
wos	WOS:000330322400077
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2012_029
id	caadria2012_029
authors	Dutt, Florina and Subhajit Dasd
year	2012
title	Responsive achitectural surface design from nonlinear systems biology: Responsive architectural design by computational methods
doi	https://doi.org/10.52842/conf.caadria.2012.465
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 465–474
summary	The fundamental processes in living systems can be a potential resource to derive nonlinear relationships that could find application in the design of responsive surface from an architectural standpoint. This research focuses on deriving a parametric relationship from a phenomenon in cell biology to generate an architectural expression of responsive surface/ façade. It further delineates the dynamic feedback mechanism from the environment and user as control factors. Through extensive investigation of cell-to-cell connections in the mammary epithelial cells and review of evident relay of communication across the entire system of cells, we could unfold the logical parameters of the biological system. Parametric modelling indicating the causality of the surface condition, changes with the change in extracellular matrix. This gives an opportunity to manoeuvre the surface parameters, contrary to the involuntary cell environment where the behaviours are under the control of a physiological process. Architecturally, the dynamic relationship of surface in a hybridised model, explains that interactivity is not a mere one to one response to a stimulus. Evidently, this interactive process can be a sophisticated loop of feedback through different materiality and componentry that play their effects (and are played back) by “active” surfaces.
keywords	Computational design; responsive architecture; sustainable façade design; bio-inspired design; bio-mimicry
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2012_022
id	ecaade2012_022
authors	Ham, Jeremy J. ; Schnabel, Marc Aurel ; Datta, Sambit
year	2012
title	Developing Online Construction Technology Resources in Tectonic Design Education
doi	https://doi.org/10.52842/conf.ecaade.2012.1.135
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 135-142
wos	WOS:000330322400013
summary	We outline issues of importance in relation to tectonic design within the architectural profession and the relationship to architectural education in Australia. Twelve years of research and curriculum development at Deakin University is discussed, involving the creation of online resources and case studies, digitally-integrated projects relating to building construction and design studio education. The ethos behind the Construction Primer of engaging students as ‘amateur researchers’ in a way that ensures ‘that student research work is worth more than course assessment’ forms the pedagogical foundation of much of this work. A model of Socially Networked Construction Technology education has been developed that integrates social networks and the Internet to engage students in tectonic design within and outside the classroom through authentic curricula. Through the use of Virtual Galleries, Blogs, YouTube and social networks, a culture of peer learning and sharing has ben developed. Through shared knowledge facilitated through social networks, great potential lies for expanding the synergies between higher order learning and online resource development for design decision support.
keywords	Construction technology; social network; online learning; design decision support
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia12_457
id	acadia12_457
authors	Shook, David ; Sarkisian, Mark
year	2012
title	Weighted Metrics: Synthesizing Elements for Tall Building Design
doi	https://doi.org/10.52842/conf.acadia.2012.457
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 457-466
summary	Salient attributes of previously designed projects can be examined to understand how key parameters could inform current design practices. These parameters include gross floor area, number of stories, occupancy, material type, geographic location, seismicity, climatic influences, etc. Two informative analysis tools for intelligent design have been developed which can be used from preliminary planning stages to the final design of individual structures to district-wide developments. These tools can evaluate concurrent influences of these parameters on the built environment. The first is the Environmental Analysis Tool™ (EA Tool). The EA Tool quantifies the estimated equivalent carbon dioxide emissions of structural components. The second analysis tool is Parametric City Modeling (PCM). PCM estimates the usable area of a tower by estimating net floor area. These tools can also be applied to multiple buildings at a district scale to facilitate a new level of design in urban planning efforts. Design information embodied in the physical built environment finds new purpose in the informative prediction of performance at the on-set of digital design. Harvesting and mining data as a natural resource brings new potential to informed design. These concepts and subsequent tools are vital to building sustainable and efficient cities of the future.
keywords	Data Harvesting , Sustainability , Building Efficiency , Urban Planning , Parametric Design , Optimization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2012_228
id	ecaade2012_228
authors	Taron, Joshua M.
year	2012
title	Speculative Structures: Reanimating Latent Structural Intelligence in Agent-based Continuum Structures
doi	https://doi.org/10.52842/conf.ecaade.2012.1.365
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 365-373
wos	WOS:000330322400037
summary	The potential afforded by the open search spaces of both agent-based models and evolutionary engines have given architecture yet another set of computational tools to play with, yet more often than not and with some cause, they are used in isolation from one another. This research explores the set of techniques and results of having combined swarm formations, FEM software and an evolutionary engine within a parametric modeling environment such that they induce materially intelligent and structurally viable swarmed formations. A set of protocols are developed for grafting these formations into the already-built environment, treating it as a resource to be accessed and exploited toward the production of novel morphogenetic results and architectural possibilities.
keywords	Interoperability; morphogenetics; evolutionary computation; swarms; FEA structural analysis
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
wos	WOS:000330320600014
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_214
id	sigradi2012_214
authors	Ibarra, Bárbara; Jové, Clara
year	2012
title	Diseño de estrategias para el consumo responsable de aparatos electrónicos [Design of strategies for responsible consumption of electronic devices]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 149-153
summary	Exploratory, analytical and experimental research held in Santiago, Chile, seeks to propose strategies that encourage responsible consumption of electronic devices (ED) for young people in order to extend the life of personal computers. Through the study of consumption and users’ behavior with their personal computers and the analysis of stimulus and information founded in ED, this research expects to identify significant aspects that can be incorporated into new design proposals in software and hardware.
keywords	electronic devices (ED); consumption; young user; interface; e-waste
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2012_142
id	ecaade2012_142
authors	Shin, Dongyoun; Arisona, Stefan Müller; Georgakopoulou, Sofia; Schmitt, Gerhard; Kim, Sungah
year	2012
title	A Crowdsourcing Urban Simulation Platform on Smartphone Technology: Strategies for Urban Data Visualization and Transportation Mode Detection
doi	https://doi.org/10.52842/conf.ecaade.2012.2.377
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 377-384
wos	WOS:000330320600039
summary	We propose a crowdsourcing simulation environment that brings human intention into the urban simulator. Our fundamental goal is to simulate urban sustainability by employing direct human interaction. In this paper we present a prototype mobile phone application that implements a novel transportation mode detection algorithm. The mobile phone application runs in the background and continuously collects data from the built-in acceleration and network location sensors. The collected data is analyzed by the transportation mode detection algorithm and automatically partitioned into activity segments. A key observation of our work is that walking activity can be robustly detected in the data stream and acts as a separator for partitioning the data stream into other activity segments. Each vehicle activity segment is then sub-classifi ed according to the type of used vehicle. Our approach yields high accuracy despite the low sampling interval and not requiring GPS data that bring minimized device power consumption. Ultimately, the collected information can be translated into real-time urban behavior and will indicate sustainability, both on the personal and the city level.
keywords	Crowdsourcing simulation platform; transport mode detection; social sensing; urban sustainability; mobile application
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201210203
id	ijac201210203
authors	Abdelhameed, Wael A.
year	2012
title	Micro-Simulation Function to Display Textual Data in Virtual Reality
source	International Journal of Architectural Computing vol. 10 - no. 2, 205-218
summary	Virtual reality creates an effective communication platform with a high degree of perception and exploration, increasing the benefits of VR applied functions.This research paper reports a virtual reality function of using the micro-simulation editor-player with XML file in the virtual reality environment.The details of the function are presented.The function aiming at combining visual and textual data in VR model visualisation, was developed by the researcher, and was included in the micro-simulation plug-in of a virtual reality program,VR Studio version 6, previously known as UC-Win/Road, by the program developers.The research paper discusses the computer simulation techniques and uses in virtual reality in general.The research paper proceeds to introduce a case study of construction process visualization in the virtual reality environment, in which the newly developed function is utilized to simultaneously visualise data reports related to the stages of VR model visualisation.The concluding remarks accentuate this micro-simulation function with its potential uses in different fields.
keywords	Micro-Simulation, XML,Virtual Reality, Construction Process Visualisation
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2012_73
id	sigradi2012_73
authors	Amen, Fernando García; Álvarez, Marcelo Payssé; Bonifacio, Paulo Pereyra; Meirelles, Lucía
year	2012
title	Fabricando mundos. Realidad, simulacro e inmanencia [Manufacturing worlds. Reality, simulacra and immanence]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 645-648
summary	Digital manufacturing in both as art and technology is a new way of designing, re-creation and re-invention of reality. This paper considers, from an epistemological point of view, the process of digital fabrication and its hyperlinks to known and simulated reality, and its ontological nature. Through documentation and methodological approach to the construction of a Moebius strip, this paper analyzes the nature and specifications of digital manufacturing. For this purpose, it makes a study of some strip properties and establishes a correlation within digital manufacturing, emphasizing similarities, complexities and shared qualities. Thus, it aims to create a reflection and a critical perspective on the complex logic of creation and simulation of knowable reality. And also it contributes to explore a theoretical corpus on the role of architects and designers in this incipient and ongoing discipline.
keywords	Fabricación digital, Realidad, Simulacro, Inmanencia
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
wos	WOS:000330322400002
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
wos	WOS:000330320600044
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_439
id	acadia12_439
authors	As, Imdat ; Angelico, Maria
year	2012
title	Crowdsourcing Architecture: A Disruptive Model in Architectural Practice
doi	https://doi.org/10.52842/conf.acadia.2012.439
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 439-443
summary	This paper discusses the use of crowdsourcing as a new approach for architectural design acquisition. We will give an overview of the concept of crowdsourcing, and elaborate on its particular application in architecture via concrete projects executed on Arcbazar, a firstof- its-kind crowdsourcing platform for architectural design services. We argue that online crowdsourcing platforms can have an immense impact on smaller-scale design challenges, e.g., home remodeling projects and landscape and interior design challenges, and can potentially carry these often neglected projects into the architectural design sphere. In this paper we will discuss the methods and techniques of architectural crowdsourcing and illustrate the processes and outcomes through a series of projects: a remodeling project for a closet; an interior design challenge for a dining space; and a layout problem for an apartment complex. We will then evaluate the protocol and outcome of architectural crowdsourcing, and convey the professional and popular media response to this new method of architectural design acquisition.
keywords	crowdsourcing , competitions , networking , interaction , collaboration
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

For more results click below: