Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201210405
id	ijac201210405
authors	Braumann, Johannes; Sigrid-Brell Cokcan
year	2012
title	Digital and Physical Tools for Industrial Robots in Architecture: Robotic Interaction and Interfaces
source	International Journal of Architectural Computing vol. 10 - no. 4, 541-554
summary	The development of digital and physical tools is highly dependent on interfaces, which define the terms of interaction both between humans and machines, as well as between machines and other machines.This research explores how new, advanced human machine interfaces, that are built upon concepts established by entertainment electronics can enhance the interaction between users and complex, kinematic machines. Similarly, physical computing greatly innovates machine-machine interaction, as it allows designers to easily customize microcontroller boards and to embed them into complex systems, where they drive actuators and interact with other machines such as industrial robots.These approaches are especially relevant in the creative industry, where customized soft- and hardware is now enabling innovative and highly effective fabrication strategies that have the potential to compete with high-tech industry applications.
series	journal
last changed	2019/05/24 09:55

_id	acadia12_217
id	acadia12_217
authors	Dourtme, Stella ; Ernst, Claudia ; Garcia, Manuel Jimenez ; Garcia, Roberto
year	2012
title	Digital Plaster: A Prototypical Design System
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 217-230
doi	https://doi.org/10.52842/conf.acadia.2012.217
summary	Contemporary computational design processes offer more potential in the design of complex formal architectural outcomes when material processes and fabrication techniques are incorporated within a digital working methodology. This paper discusses the research project “Digital Plaster” which show-cases the development of such an architectural machine that enabled a digital design process to incorporate fabrication and structural form finding processes within flexible formwork plaster casting by the means of digitally depicting a material ecology.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia12_139
id	acadia12_139
authors	Erioli, Alessio ; Zomparelli, Alessandro
year	2012
title	Emergent Reefs
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 139-148
doi	https://doi.org/10.52842/conf.acadia.2012.139
summary	The Emergent Reefs project thrives on the potential that emerge from a coherent utilization of the environment’s inherent ecological structure for its own transformation and evolution, using an approach based on digitally simulated ecosystems and sparkled by the possibilities and potential of large-scale 3D printing technology. Considering tourism as an inevitable vector of environmental change, the project aims to direct its potential and economic resources towards a positive transformation, providing a material substrate for the human-marine ecosystem integration with the realization of spaces for an underwater sculpture exhibition. Such structures will also provide a pattern of cavities which, expanding the gradient of microenvironmental conditions, break the existing homogeneity in favor of systemic heterogeneity, providing the spatial and material preconditions for the repopulation of marine biodiversity. Starting from a digital simulation of a synthetic local ecosystem, a generative technique based on multi-agent systems and continuous cellular automata (put into practice from the theoretical premises in Alan Turing’s paper “The Chemical basis of Morphogenesis” through reaction-diffusion simulation) is implemented in a voxel field at several scales giving the project a twofold quality: the implementation of reaction diffusion generative strategy within a non-isotropic 3-dimensional field and integration with the large-scale 3D printing fabrication system patented by D-Shape®. Out of these assumptions and in the intent of exploiting the expressive and tectonic potential of such technology, the project has been tackled exploring voxel-based generative strategies. Working with a discrete lattice eases the simulation of complex systems and processes across multiple scales (including non-linear simulations such as Computational Fluid-Dynamics) starting from local interactions using, for instance, algorithms based on cellular automata, which then can be translated directly to the physical production system. The purpose of Emergent-Reefs is to establish, through strategies based on computational design tools and machine-based fabrication, seamless relationships between three different aspects of the architectural process: generation, simulation and construction, which in the case of the used technology can be specified as guided growth.
keywords	emergence , reef , underwater , 3D printing , ecology , ecosystem , CFD , agency , architecture , tourism , culture , Open Source
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia12_251
id	acadia12_251
authors	Winn, Kelly ; Vollen, Jason ; Dyson, Anna
year	2012
title	Re-Framing Architecture for Emerging Ecological and Computational Design Trends for the Built Ecology
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 251-258
doi	https://doi.org/10.52842/conf.acadia.2012.251
summary	The dualities of ‘Humanity and Nature’, ‘Organic and Inorganic’, Artificial and Synthetic’ are themes that have permeated architectural discourse since the beginning of the 20th c. The interplay between nature and machine can be directly related to the 19th c. discussion of nature and industrialism that was exemplified in the works of Louis Sullivan and Frank Lloyd Wright that spawned the organic architect movement. Echoes of these dichotomous themes have been resuscitated with the introduction of computational and information processing as a fundamental part of contemporary theory and critical praxis. The ability to go beyond simplistic dualities is promised by the introduction of data informed multi-variable processes that allow for complex parametric processes that introduce a range of criteria within evaluative design frameworks. The investigations detailed herein focuses on surface morphology development that are explored and evaluated for their capacity to reintegrate the ideas from genetic and developmental biology into an architectural discourse that has historically been dominated by the mechanistic metaphor perpetuated throughout the modern era. Biological analogues in nature suggest that the zone of decoration plays an important role in the environmental response and climate adaptability of architecture. The building envelope represents the greatest potential energetic gain or loss, as much as 50 %, therefore the architectural envelope plays the most significant role in energy performance of the building. Indeed, from an environmental performance standpoint, the formal response of the envelope should tend toward complexity, as biology suggests, rather than the reduced modernist aesthetic. Information architecture coupled with environment and contextual data has the potential to return the focus of design to the rhizome, as the functional expressions of climatic performance and thermal comfort interplay within other cultural, social and economic frameworks informing the architectural artifact. Increasing the resolution that ornament requires in terms of geometric surface articulation has a reciprocal affect on the topological relationship between surface and space: the architectural envelope can respond through geometry on the surface scale in order to more responsively interface with the natural environment. This paper responds to increasing computational opportunities in architectural design and manufacturing; first by exploring the historical trajectory of discourse on nature vs. machine in architecture, then exploring the implications for utilizing environmental data to increase the energy performance of architecture at the building periphery, where building meets environment creating the synthetic Built Ecology.
keywords	ecology , biomimicry , biophilia , natural , synthetic , artificial , parametric , digital , function , production , performance , modernism , form , ornament , decoration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	caadria2012_025
id	caadria2012_025
authors	Braumann, Johannes and Sigrid Brell-Cokcan
year	2012
title	Digital and physical computing for industrial robots in architecture: Interfacing Arduino with industrial robots
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 317–326
doi	https://doi.org/10.52842/conf.caadria.2012.317
summary	Customisation is one of the most important topics in architecture, as architects generally work on individual prototypes instead of mass-produced designs. By using customised design and fabrication tools, architects are able to individually respond to challenges, instead of relying on universal software tools. This paper proposes new software components for interfacing industrial robots with physical computing microcontrollers, thereby allowing the customisation of physical tools for industrial robots. By pairing physical computing with rapid prototyping, architects are able to design and prototype individual fabrication processes for industrial robots.
keywords	Industrial robots; physical computing; interfaces; rapid prototyping; computer aided manufacturing
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_100
id	ecaade2012_100
authors	Braumann, Johannes; Brell-Cokcan, Sigrid
year	2012
title	Real-Time Robot Simulation and Control for Architectural Design
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 479-486
doi	https://doi.org/10.52842/conf.ecaade.2012.2.479
wos	WOS:000330320600050
summary	Industrial robots for architectural fabrication have not yet been directly linked to the design process, as current research focuses mostly on the automated generation of robot control data for mass customization. In this paper, we will discuss the use of a real-time programming environment for robot simulation/control and introduce a virtual robot, that allows architects to digitally prototype fabrication processes. While such a real-time approach is also suitable for mass customization, the main advantage is that this interaction with the virtual-robot can be used to intuitively solve complex fabrication problems.
keywords	Industrial Robots; Inverse Kinematics; Virtual Robot; Mass Customization; Simulation; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201210301
id	ijac201210301
authors	Pan, Cheng-An; Taysheng Jeng
year	2012
title	Cellular Robotic Architecture
source	International Journal of Architectural Computing vol. 10 - no. 3, 319-339
summary	An emerging need for interactive architecture is currently making buildings mutable, flexible in use, and adaptable to changes in climate by introducing robotic systems. However, the feasibility of the seamless integration of building construction details and kinetic robotics has become a critical issue for developing robotic architecture. The objective of this work is to develop a robotic architecture with an emphasis on the integration of cellular robotics with a distributed kinetic building surface. The kinetic building surface integrates an actuating system, a localization and remote control system, which become part of the kinetic building system. This paper presents a systematic framework by reviewing theories and related work of robotic architecture and automated control. An architectural design scheme is proposed to simulate a scenario of application in a physical space. The functionality of the electrical and control system and the integration of the effects of actual construction were examined by a prototype of a kinetic surface. Our prototype presents a feasible construction method, and a prominent energy-saving effect. The potential strength and restrictions of the cellular robotic approach to architectural applications are discussed. The applicability of the prototype system and issues about controlling the behavior of spatial robots are demonstrated in this paper.
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_078
id	caadria2012_078
authors	Beorkrem, Christopher
year	2012
title	Running Interference: Complex Systems Intervention as Design Process
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 183–192
doi	https://doi.org/10.52842/conf.caadria.2012.183
summary	This paper presents a case study problem statement tested in the design studio with the intent of teaching methods for engaging systematic thinking as a process for deriving solutions to parametric design problems. The intent is to address the simulation environment developed through complex systems and interject a curve ball, or unexpected constraint delimiting the solution as part of the design process. This method was tested through the submittal of the projects to international design competitions. The students were asked to manipulate the competition criteria by appealing not only to the design criteria but also to the juries desire (whether conscious or unconscious) for novel sustainable processes of material usage and program. This material ecology is developed as a method for linking parametric modelling, not as a process for the application of a construction technique, but as a way to pre-rationalise material constraints and discover how program and form can operate within those constraints. In the first year of the studio two of six teams were selected as finalists and in the second year of the studio five of seven of the teams were selected as finalists.
keywords	Studio pedagogy; computational instruction; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
doi	https://doi.org/10.52842/conf.acadia.2012.511
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
doi	https://doi.org/10.52842/conf.acadia.2012.127
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_325
id	acadia12_325
authors	Chronis, Angelos ; Tsigkari, Martha ; Davis, Adam ; Aish, Francis
year	2012
title	Design Systems, Ecology, and Time Angelos Chronis, Martha Tsigkari, Adam Davis, Francis Aish"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 325-332
doi	https://doi.org/10.52842/conf.acadia.2012.325
summary	Discussion of architecture in ecological terms usually focuses on the spatial and material dimensions of design practice. Yet there is an equally critical temporal dimension in ecology that is just as relevant to design. At the micro scale is the question of 'real time' feedback from our design systems. At the macro scale is the issue of sustainability, in other words long term -- and potentially disastrous -- feedback from terrestrial ecosystems. In between are numerous different units for quantizing time in design and computation. In this paper, we examine some of these units -- 'real time', 'design time', 'development time' -- to suggest how they interact with the ecology of design technology and practice. We contextualize this discussion by reference to relevant literature from the field of ecology and to our work applying custom design and analysis tools on architectural projects within a large interdisciplinary design practice.
keywords	real time feedback , performance driven design , integration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_177
id	sigradi2012_177
authors	Davis, Felecia
year	2012
title	Form Active Translations: Knitted Textiles to 3D Printed Textiles
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 392-396
summary	Material translation as a driver of innovation through craft, specifically the translation from machine knitted textiles to 3D rapidly prototyped textiles is discussed in this paper. If architects and designers can develop methods to translate existing textile structures and behaviors, then architects and designers can harness the vast extant knowledge base that goes into the design and fabrication of geometric textile structures and resultant behaviors to develop new materials and tools to construct active building systems that use the pliability of textiles to advantage.
keywords	3D Printed Textiles, 3D Printing, Architextiles, Knitted Materials
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2012_348
id	sigradi2012_348
authors	de Abreu, Sandro Canavezzi
year	2012
title	Regimes de permeabilidade entre o humano e os meios digitais e a tensão entre o digital e o analógico em processos de criação em Arquitetura [Regimes of permeability between human and digital media and the tension between digital and analogical in creative processes in Architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 69-73
summary	This article intends to introduce the concept of regimes of permeability (mirroring, transparency and crossing) between man and digital machine as a framework for understanding the relation between analogical and digital and that is also present in computer mediated creative processes in Architecture. These regimes are based in the relation between the concepts information and transduction. Finally, it will be described an experiment where an interface was created relating to the regimes of permeability.
keywords	espelho; informação; transdução; interfaces
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2012_60
id	ecaade2012_60
authors	Dierichs, Karola; Menges Achim
year	2012
title	Material and Machine Computation of Designed Granular Matter: Rigid-Body Dynamics Simulations as a Design Tool for Robotically-Poured Aggregate Structures Consisting of Polygonal Concave Particles
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 711-719
doi	https://doi.org/10.52842/conf.ecaade.2012.2.711
wos	WOS:000330320600076
summary	Loose granulates are a relevant yet rarely deployed architectural material system. Their significance lies in their capacity to combine fluid-like amorphousness with solid-like rigidity, resulting in potential architectural structures capable of continuous reconfi guration. In addition aggregates allow for functional grading. Especially if custom designed concave particles are used, full-scale architectural structures can be poured using a six-axis industrial robot, combining the precise travel of the emitter-head with the self-organizational capacity of granular substances. In this context, the paper proposes Rigid-Body Dynamics (RBD) simulations as a design-tool for the robotic pouring of loose granular structures. The notions of material and machine computation are introduced and RBD is explained in greater detail. A set of small tests is conducted to investigate the advantages and disadvantages of a specifi c RBD software. Conclusively, further areas of research are outlined.
keywords	Material and machine computation; aggregate architectures; designed granulates; robotic pouring; Rigid-Body Dynamics
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2012_318
id	ecaade2012_318
authors	Fioravanti, Antonio ; Loffreda, Gianluigi ; Simeone, Davide ; Trento, Armando
year	2012
title	“Divide et Impera” to dramatically and consciously simplify design: The mental/instance path - How reasoning among spaces, components and goals
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 269-278
doi	https://doi.org/10.52842/conf.ecaade.2012.1.269
wos	WOS:000330322400027
summary	In our times, in a complex and universal village where problems are intertwined and pervasive beyond our imagination, we need new approaches to deal with them – appropriately. In a previous work we highlighted the importance to reason ontologies: a ‘world’ f.i. a building – as a mental image – is not a Linnaeus’s classifi cation (structured set of entities) but a system (goals oriented set of classes) able to reasoning upon selectively chosen entities belonging to different Realms (ontology universes) (Fioravanti et al., 2011a). The general aim of our research– to be an effective aid to design – is to simulate wo/man as designer and user of designed spaces, hence how mental skill can be computably included in new tools able to tackle these problems. This paper is focused on the fi rst role: how actor-designers approach design problems and how the inference mechanism can help them and affect the design process. A ‘Building Object’ - the dual system of Spaces and Technology elements – is inferred in several ways according to different goals and the inference mechanism can, simulating human mental shortcuts, optimize thinking.
keywords	Design process; design operational theory; thinking optimization; inferential mechanisms; human-machine collaboration
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia12_169
id	acadia12_169
authors	Helm, Volker ; Ercan, Selen ; Gramazio, Fabio ; Kohler, Matthias
year	2012
title	In-Situ Robotic Construction: Extending the Digital Fabrication Chain in Architecture
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 169-176
doi	https://doi.org/10.52842/conf.acadia.2012.169
summary	In this paper, viable applications of mobile robotic units on construction sites are explored. While expanding on potential objectives for in-situ fabrication in the construction sector, the intention is also to build upon innovative man-machine interaction paradigms to deal with the imprecision and tolerances often faced on construction sites. By combining the precision of the machine with the cognitive environmental human skills, a simple but effective mobile fabrication system is experimented for the building of algorithmically designed additive assemblies that would not be possible through conventional manual methods if the large amount of individual building blocks and the size of the structure to be built are taken into account. It is believed that this new approach to man-machine collaboration, aimed at a deeper integration of human ability with the strengths of digitally controlled machines, will result in advances in the construction sector, thus opening up new design and application fields for architects and planners.
keywords	in-situ robotic fabrication , mobile robotics , 1:1 scale fabrication , additive assembly , algorithmically designed structures , man-machine interaction , cognitive , object recognition , construction site
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	acadia12_15
id	acadia12_15
authors	Johnson, Jason Kelly; Cabrinha, Mark; Steinfeld, Kyle
year	2012
title	Synthetic Digital Ecologies
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 15-17
doi	https://doi.org/10.52842/conf.acadia.2012.015
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “… architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry …” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:52

_id	acadia12_000
id	acadia12_000
authors	Johnson, Jason; Cabrina, Mark and Steinfeld, Kyle (eds.)
year	2012
title	ACADIA 12: Synthetic Digital Ecologies
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), 588p.
doi	https://doi.org/10.52842/conf.acadia.2012
summary	Why use the terms synthetic and ecology in the context of a conference dedicated to the field of digital architecture, computation and fabrication? How do we begin to unpack the synthetic union of diverse elements, processes, collaborators, and code underlying any single contemporary design or research project? What could our field gain by interrogating these diverse ecologies? What are the relationships and interactions between our design processes, including our various tools and techniques, and the multiple environments with which we routinely work, collaborate and make? It is these questions and more that we hope to address at this year’s “Synthetic Digital Ecologies” conference. A quick scan of the papers and projects that will be presented at ACADIA reveals an extraordinary ecology of experimental research that emerged by working between messy labs, studios, workshops, hacker spaces and the like. In many ways today’s so-called “digital architects” do not feel compelled to distinguish between what is digitally designed and what is not. They are leading the way through a promiscuous and synthetic mixing of skill sets, of pens and paper, hardware and software, electronics and g-code. In a single research project these designers might collaborate with a computer scientist, a robotics expert and a glass blower, and in many cases they might even attempt to do all of these things themselves. It was with this in mind that we put forth an international call inviting, “... architects, fabricators, engineers, media artists, technologists, software developers, hackers and others in related fields of inquiry ...” to submit papers and projects for this year’s conference. This year the proceedings have been organized into twelve synthetic categories based around the potential for diverse research topics to inform new and unexpected conversations. Instead of organizing peer-reviewed papers and projects through their formal characteristics, we were interested in forming new synthetic categories by curating unexpected juxtapositions. This ecology of ideas and research was meant to provoke and inspire new ways of thinking, making, building and collaborating.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2012_83
id	ecaade2012_83
authors	Jones, Paulo; Eloy, Sara; Ricardo, Rui; Dias, Miguel Sales
year	2012
title	Architectural Rehabilitation and Conservation Processes Informed by Augmented Reality
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 411-418
doi	https://doi.org/10.52842/conf.ecaade.2012.2.411
wos	WOS:000330320600043
summary	The goal of the presented research is to explore human-machine interaction and to study how Augmented Reality (AR) may be a potential tool to inform Architectural Rehabilitation and Conservation processes. Nowadays obtaining data to inform both marchitecture projects and real estate investments is a very bureaucratic process. City councils technicians suffers from the same diffi culties when are in fi eldwork to do inspections and lack a complete sort of information. This proposal considers that the use of mobile technologies as smart phones and tablets can empower these technicians to obtain building related data. The specifi c goal of the study aims to develop a data model and an interface that can be made available to professionals which allows an efficiently reply to the user’s needs as the system enables the gathering of updated information considering a particular building.
keywords	Augmented reality; interface; architecture; rehabilitation; data
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: