Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
wos	WOS:000330322400051
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_057
id	ecaade2012_057
authors	Bielik, Martin ; Schneider, Sven ; König, Reinhard
year	2012
title	Parametric Urban Patterns: Exploring and integrating graph-based spatial properties in parametric urban modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.701
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-708.
summary	The article presents a graph-based spatial analysis toolset (“decoding spaces”components) which we have recently developed as an extension of the visual scripting language Grasshopper3D for Rhino. These tools directly integrate spatial analysis methods into CAD design software which can have a signifi cant effect on current design workfl ows. However,grasshopper doesn’t only enable the results of analyses to be used in the standard Rhino modelling environment. It also makes it possible to integrate spatial analysis into a parametric design approach as discussed in this paper. The functionality of this toolset is demonstrated using a simple urban design scenario where we introduce the idea of parametric patterns based on graph-measures.
wos	WOS:000330322400074
keywords	Spatial analysis; parametric modelling; urban layout; design process; decoding spaces
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac201210108
id	ijac201210108
authors	Celani, Gabriela; Carlos Eduardo Verzola Vaz
year	2012
title	CAD Scripting and Visual Programming Languages for Implementing Computational Design Concepts: A Comparison from a Pedagogical Point of View
source	International Journal of Architectural Computing vol. 10 - no. 1, 121-138
summary	This paper compares the use of scripting languages and visual programming languages for teaching computational design concepts to novice and advanced architecture students. Both systems are described and discussed in terms of the representation methods they use. With novice students better results were obtained with the visual programming language. However, the generative strategies used were restricted to parametric variation and the use of randomness. Scripting, on the other hand, was used by advanced students to implement rule-based generative systems. It is possible to conclude that visual languages can be very useful for making architecture students understand general programming concepts, but scripting languages are fundamental for implementing generative design systems. The paper also discusses the importance of the ability to shift between different representation methods, from more concrete to more abstract, as part of the architectural education.
series	journal
last changed	2019/07/30 10:55

_id	caadria2012_032
id	caadria2012_032
authors	Chok, Kermin
year	2012
title	Automation at scale: Geometry, analysis and post processing
doi	https://doi.org/10.52842/conf.caadria.2012.017
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 17–26
summary	Our team is currently engaged in the peer review of a large steel stadium dome roof. The roof has a diameter of approximately 300m and rises to over 70m in elevation. In addition to its size, the roof also contains a moveable component which can be deployed during inclement weather. The roof structure comprises of approximately 32,000 beams with 10,000 nodes. This paper overviews our efforts in scaling digital design techniques with regards to automation and parametric geometry to expedite the verification of structural members and geometrically complicated connection nodes. The paper will discuss two realms where automation was deployed. The first realm is the verification of Type 1 node connections where less than eight members intersect at a single work point and is relatively geometrically simple. Type 1 nodes were checked against published code requirements. Type 2 connections consisted of nodes where more than eight members intersected or bracing angles did not meet code guidelines. Type 2 nodes were verified using the finite element method and large scale automation of node geometry creation to structural analysis post processing was employed.
keywords	Automation; Rhino 3D; scripting; structural; database
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2012_214
id	ecaade2012_214
authors	Das, Subhajit ; Dutt, Florina
year	2012
title	Design optimization in a hotel and offi ce tower through intuitive design procedures and advanced computational design methodologies. Façade design optimization by computational methods
doi	https://doi.org/10.52842/conf.ecaade.2012.1.235
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 235-243
summary	The research topic of this paper exemplifies design optimization techniques of a hotel/office tower in Central China (Nanjing city), which faces subtropical humid climate throughout the year. The main intent of the project is to fi nd optimized design solution with the aid of parametric design tools and Visual Basic Scripting techniques (in Rhino Script & Grasshopper) combined with intuitive design process. In any urban context, we firmly believe that architectural design is a responsive phenomenon, which faces diverse interaction with the user & the local climate. The building design of the proposed tower acknowledges these responsive factors of the design with the environment along with building users or residents. Consequently, we strive to develop a sustainable design solution, which is ecologically efficient and psychologically conducive to the wellbeing of the user. We developed our intuitive design product with complex computational design toolsets to leverage design and energy efficiency. In this procedure, we draw major design concepts and geometrical typologies from natural systems in the form of bio mimicry or biologically inspired design process. Overall, this research paper outlines the significance and relevant benefi ts of the combination of intuitive design (from experience, expertise and architects skills) with parametric scripting tools.
wos	WOS:000330322400023
keywords	Sustainable Building Façade; Parametric Architecture; Intelligent building skin; Solar Architecture
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2012_196
id	sigradi2012_196
authors	Gokmen, Sabri
year	2012
title	The Ornaments of Shoowa Kuba: A digital re-interpretation of a textile art
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 79-83
summary	This paper will discuss how Shoowa Kuba textiles could be analyzed as an ornament that can be digitally constructed and applied in design. An historical outline of ornament is provided by briefly comparing Classical and Gothic ornaments. This theoretical framework is then compared to the art of Shoowa Kuba focusing on their textile embroideries. Various patterns and techniques will be introduced showing how Kuba people implement rules as well as how they break them. These patterns will be digitally reconstructed to show their applicability to the digital design domain.
keywords	Digital design research, textile patterns, ornaments, scripting
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2016_119
id	ecaade2016_119
authors	Koenig, Reinhard and Varoudis, Tasos
year	2016
title	Spatial Optimisations - Merging depthmapX, spatial graph networks and evolutionary design in Grasshopper
doi	https://doi.org/10.52842/conf.ecaade.2016.2.249
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 249-254
summary	In the Space Syntax community, the standard tool for computing all kinds of spatial graph network measures is depthmapX (Varoudis, 2012). The process of evaluating many design variants of networks is relatively complicated, since they need to be drawn in a separated CAD system, exported and imported in depthmapX via dxf file format. This procedure disables a continuous integration into a design process. Furthermore, the standalone character of depthmapX makes it impossible to use its network centrality calculation for optimization processes. To overcome this limitations, we present in this paper the first steps of experimenting with a Grasshopper component (Varoudis, 2016) that can access the functions of depthmapX and integrate them into Grasshopper/Rhino3D. Here the component is implemented in a way that it can be used directly for an evolutionary algorithm (EA) implemented in a Python scripting component in Grasshopper.
wos	WOS:000402064400024
keywords	Space Syntax; Evolutionary Algorithm; Grasshopper; Python; DepthmapX; Optimization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2012_087
id	ecaade2012_087
authors	Lorenz, Wolfgang E.
year	2012
title	Estimating the Fractal Dimension of Architecture: Using two Measurement Methods implemented in AutoCAD by VBA
doi	https://doi.org/10.52842/conf.ecaade.2012.1.505
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 505-513
summary	The concept of describing and analyzing architecture from a fractal point of view, on which this paper is based, can be traced back to Benoît Mandelbrot (1981) and Carl Bovill (1996) to a considerable extent. In particular, this includes the distinction between scalebound (offering a limited number of characteristic elements) and scaling objects (offering many characteristic elements of scale) made by B. Mandelbrot (1981). In the fi rst place such a differentiation is based upon a visual description. This paper explores the possibility of assistance by two measurement methods, fi rst time introduced to architecture by C. Bovill (1996). While the box-counting method measures or more precisely estimates the box-counting dimension D b of objects (e.g. facades), range analysis examines the rhythm of a design. As CAD programs are familiar to architects during design processes, the author implemented both methods in AutoCAD using the scripting language VBA. First measurements indicate promising results for indicating the distinction between what B. Mandelbrot called scalebound and scaling buildings.
wos	WOS:000330322400052
keywords	Box-Counting Method; Range Analysis; Hurst-Exponent; Analyzing Architecture; Scalebound and Scaling objects
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2012_235
id	sigradi2012_235
authors	Polo, Pablo Herrera
year	2012
title	Reutilizando códigos como mecanismo de información y conocimiento: Programación en arquitectura [Reusing codes as a mechanism of information and cognition: Scripting in architecture]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 74-78
summary	Differently from other regions in the Planet, since 2010, in Latin America textual programming language (Rhinoscripting) is being replaced by its visual equivalent (Grasshopper). This is a consequence of our preference for an interactive platform, and because our design problems are not as complex, so we aim to control geometrical problems or aspects belonging to an product scale instead of an architectural one. Problems emerging when creating code could be improved by modifying and reusing existing solutions as a starting point, since learning would not be centered in the object but in the process of creating it, using a suitable instrument.
keywords	Visual Programming Language; Textual Programming Language; Scripting; Grasshopper; Rhinoscripting
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2012_226
id	ecaade2012_226
authors	Sopeoglou, Eva
year	2012
title	Scripting shadows: Weaving digital and physical environments through design and fabrication
doi	https://doi.org/10.52842/conf.ecaade.2012.1.255
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 255-258
summary	This paper considers the opportunities of engaging in a creative dialogue between the physical and the digital, through the use of generative design tools and digital fabrication technologies. Digital iterations on an open-air installation for a pavilion take the shape of research in design. The design is partly driven by environmental parameters, such as the movement of the sun and shadows across a site in the Mediterranean. A fabricated microclimate is tailored through bespoke scripting and fabrication. In this project, rather than being used to optimise environmental parameters, scripting intents to offer a delightful milieu for human comfort.
wos	WOS:000330322400025
keywords	Scripting; digital fabrication; shading; environmental comfort
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_144
id	ecaade2012_144
authors	Wurzer, Gabriel ; Pak, Burak
year	2012
title	Lawnmower: Designing a web-based visual programming environment that generates code to help students learn textual programming
doi	https://doi.org/10.52842/conf.ecaade.2012.1.655
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 655-663.
summary	Learning programming can be a challenging task for design students, especially when code is to be entered in textual form. Visual programming languages, such as McNeil’s Grasshopper, have helped students to engage in scripting without having to deal with lower level syntax that is often hindering them in expressing their thoughts. However, the problem with learning how to program textually is only postponed: When switching to a new platform, students may be forced to learn coding from scratch, and, even worse, to do so in a textual environment that is yet unfamiliar. Our idea is simple: Connect visual programming with textual coding, using code-generation as means. Using this approach enables students to think visually, and see the results textually. An added bonus is the possibility to use debugging, a feature that is yet lacking from Grasshopper. By this way, our language aims to enable students to gradually move from visual to textual programming in a comfortable manner.
wos	WOS:000330322400069
keywords	Visual Programming; Structured Code; Teaching; Code Generation
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2012_006
id	ecaade2012_006
authors	Angulo, Antonieta ; Vermillion, Joshua
year	2012
title	Strategic Thinking on the Redesign of a Foundational CAAD Course: Towards comprehensive training on digital design
doi	https://doi.org/10.52842/conf.ecaade.2012.1.029
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 29-37
summary	The paper describes a new implementation of an existing course on digital design and its contribution to the curriculum of the undergraduate pre-professional architecture program at Ball State University. The strategic thinking behind the re-design of this course refl ects not only the need to update its content to reflect the state-of-the art in the domain but also responds to a diversifi ed context that exhibitschanging trends due to digital culture, use of digital media in learning and practice, and educational policy. The paper elaborates on these larger contextual elements and describes the new instructional methods implemented through a modular framework of assignments and a multi-layered delivery system. The paper concludes with a series of recommendations for the future improvement, constant assessment, and further development of the digital design course.
wos	WOS:000330322400002
keywords	Digital Design; Instructional Methods; Parametric Thinking; CAAD; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
wos	WOS:000330320600014
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

_id	ascaad2012_012
id	ascaad2012_012
authors	Bhzad Sidawi
year	2012
title	The Possible Role of CAAD Systems in Initiating Innovation in the Design Studio
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 117-128
summary	Design is a social phenomenon and the previous research highlights that design precedents and social interaction between designers including negotiation, collaboration and communications is essential to initiate creativity and the production of innovative design products. CAAD systems aim is to help the architect in formulating and developing design ideas. Researchers suggest that knowledge based systems can be integrated with CAAD systems so it would provide the architect with design knowledge that would him/ her to recall design precedents/ solutions thus link it to the design problems. Nevertheless, CAAD systems can provide limited help regarding the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is focused on architects rather than the end product. On the other hand, most of the CAAD systems have web communication tools that enable designers to communicate their with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to produce innovative design products.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_012.pdf
last changed	2012/05/15 20:46

_id	caadria2019_204
id	caadria2019_204
authors	Calixto, Victor, Gu, Ning and Celani, Gabriela
year	2019
title	A Critical Framework of Smart Cities Development
doi	https://doi.org/10.52842/conf.caadria.2019.2.685
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 685-694
summary	This paper investigates through a review of the current literature on smart cities, reflecting different concepts across different political-social contexts, seeking to contribute to the establishment of a critical framework for smart cities development. The present work provides a review of the literature of 250 selected publications from four databases (Scielo, ScienceDirect, worldwide science, and Cumincad), covering the years from 2012 to 2018. Publications were categorised by the following steps: 3RC framework proposed by Kummitha and Crutzen (2017), the main political sectors of city planning, implementation strategies, computational techniques, and organisation rules. The information was analised graphically trying to identify tendencies along the time, and also, seeking to explore future possibilities for implementations in different political-social contexts. As a case of study, Australia and Brazil were compared using the proposed framework.
keywords	smart city; smart cities; literature review
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2012_212
id	sigradi2012_212
authors	Carli, Luis; Costa, Carlos Zibel
year	2012
title	The analyze of the use of software programming in the design process of a information visualization weather data poster
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 187-190
summary	We approached a infovis design study from a graphical design point of view, focusing on the rationale and iterative nature of the process. We show how the layout solutions were developed and we present some code abstractions, methods and objects, that were created for helping representing layouts on code and iterating them. These abstractions can in the future be developed into a full toolkit focused on the layout aspects of the infovis graphic design process.
keywords	Information Visualization, Graphic Design, Layout, Design Process
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: