Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201210406
id	ijac201210406
authors	Biswas, Tajin; Ramesh Krishnamurti
year	2012
title	Data Sharing for Sustainable Building Assessment
source	International Journal of Architectural Computing vol. 10 - no. 4, 555-574
summary	Sustainable design assessment requires information, which is aggregated from different phases of a building design, and evaluated according to criteria specified in a ‘sustainable building rating system.’ In the architecture engineering and construction (AEC) domain much of the necessary information is available through open source data standards such as Industry Foundation Classes (IFC). However, no single standard that provides support for sustainability assessment completely suffices as a data structure. This paper explores the augmentation of the Construction Operations Building information exchange (COBie) model, as an intermediary data structure, to bridge between requirements of the Leadership in Energy and Environmental Design (LEED) rating system and a building information model. Development of a general framework for data sharing and information management for LEED assessments is illustrated through an implementation of a prototype using functional databases.The prototype checks and augments available data as needed, which is used to populate LEED submission templates.
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_067
id	caadria2012_067
authors	Delfosse, Vincent; John Schrayen, Roland Juchmes and Pierre Leclercq
year	2012
title	Some advice for migrating to IFC
doi	https://doi.org/10.52842/conf.caadria.2012.265
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 265–274
summary	Nowadays, the BIM (Building Information Modelling) paradigm is a central topic in the CAAD community. Next to the commercial solutions, the IFC (Industry Foundation Classes) have emerged as the best open standard candidate for BIM interoperability. Despite the efforts of the community for promoting IFC over the last 15 years, it seems that its practical adoption in real-life projects has been very limited. The goal of this article is to explore how useful IFC can be today and to provide the reader with some advice for an effective adoption of IFC. Over the last year, we have conducted a project aiming at acquiring a sound understanding of IFC. It was made of two complementary investigations. On one hand, we have focused on the commercial modelling tools and the IFC support they were offering. On the other hand, we have focused on the IFC-based software developments. We have developed a tool converting IFC files into a dedicated thermal assessment based model. We will summarise the experience we have acquired in this project into some advice for users migrating to IFC. Our goal is to confront the practical aspects of the IFC developments, with both the theoretical ambitions and the commercial support currently available.
keywords	Building information modelling; industry foundation classes; interoperability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2012_089
id	caadria2012_089
authors	Fernando, R.; R. Drogemuller and A. Burden
year	2012
title	Parametric and generative methods with building information modelling: Connecting BIM with explorative design modelling
doi	https://doi.org/10.52842/conf.caadria.2012.537
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 537–546
summary	Parametric and generative modelling methods are ways in which computer models are made more flexible, and of formalising domain-specific knowledge. At present, no open standard exists for the interchange of parametric and generative information. The Industry Foundation Classes (IFC) which are an open standard for interoperability in building information models is presented as the base for an open standard in parametric modelling. The advantage of allowing parametric and generative representations are that the early design process can allow for more iteration and changes can be implemented quicker than with traditional models. This paper begins with a formal definition of what constitutes to be parametric and generative modelling methods and then proceeds to describe an open standard in which the interchange of components could be implemented. As an illustrative example of generative design, Frazer’s ‘Reptiles’ project from 1968 is reinterpreted.
keywords	Building information model; parametric modelling; generative modelling
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210402
id	ijac201210402
authors	Toth, Bianca; Patrick Janssen, Rudi Stouffs, et al.
year	2012
title	Custom Digital Workflows: A New Framework for Design Analysis Integration
source	International Journal of Architectural Computing vol. 10 - no. 4, 481-500
summary	Flexible information exchange is critical to successful design-analysis integration, but current top-down, standards-based and model-oriented strategies impose restrictions that contradict this flexibility. In this article we present a bottom-up, user-controlled and process-oriented approach to linking design and analysis applications that is more responsive to the varied needs of designers and design teams. Drawing on research into scientific workflows, we present a framework for integration that capitalises on advances in cloud computing to connect discrete tools via flexible and distributed process networks.We then discuss how a shared mapping process that is flexible and user friendly supports non-programmers in creating these custom connections. Adopting a services-oriented system architecture, we propose a web- based platform that enables data, semantics and models to be shared on the fly.We then discuss potential challenges and opportunities for its development as a flexible, visual, collaborative, scalable and open system.
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_040
id	caadria2012_040
authors	Toth, Bianca; Stefan Boeykens, Andre Chaszar, Patrick Janssen and Rudi Stouffs
year	2012
title	Custom digital workflows: A new framework for design analysis integration
doi	https://doi.org/10.52842/conf.caadria.2012.163
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 163–172
summary	Flexible information exchange is critical to successful design integration, but current top-down, standards-based and model-oriented strategies impose restrictions that are contradictory to this flexibility. In this paper we present a bottom-up, user-controlled and process-oriented approach to linking design and analysis applications that is more responsive to the varied needs of designers and design teams. Drawing on research into scientific workflows, we present a framework for integration that capitalises on advances in cloud computing to connect discrete tools via flexible and distributed process networks. Adopting a services-oriented system architecture, we propose a web-based platform that enables data, semantics and models to be shared on the fly. We discuss potential challenges and opportunities for the development thereof as a flexible, visual, collaborative, scalable and open system.
keywords	Visual dataflow modelling; design processes; interoperability; simulation integration; cloud-based systems
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2012_276
id	ecaade2012_276
authors	Trento, Armando ; Fioravanti, Antonio ; Simeone, Davide
year	2012
title	Building-Use Knowledge Representation for Architectural Design: An ontology-based implementation
doi	https://doi.org/10.52842/conf.ecaade.2012.1.683
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 683-689.
summary	During building design processes, designers have to predict and evaluate future building performances oriented to its intended use and users. Current BIM and IFC technologies support designers allowing data exchange and information interoperability but, since their lack in semantics, they don’t provide any knowledge implementation about how the designed building will be actually used and how people will interact with it. The research described in this paper aims to overcome this shortcoming by developing a new modelling approach, oriented to representation and management of knowledge related to future building use and users. The proposed representation model is based on an already accepted ontology-based structure and will make this large amount of knowledge accessible and usable by designers during architectural design processes, in order to enhance the final quality of the design product.
wos	WOS:000330322400072
keywords	Design Knowledge Representation and Management; Ontology-based Systems; Building Use Process; Building Performances prediction and evaluation
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_008
id	ascaad2012_008
authors	Ambrose, Michael A. and Kristen M. Fry
year	2012
title	Re:Thinking BIM in the Design Studio - Beyond Tools… Approaching Ways of Thinking
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 71-80
summary	The application of digital design methods and technologies related to BIM and Integrated Practice Delivery are altering the how and what of architectural design. The way contemporary architecture is conceived and made is being transformed through the digital methods, processes and applications used in BIM. How architectural education and the design studio model evolve to reflect, interpret, translate, or challenge the multiplicitous and simultaneously variable modes of contemporary practice present opportunity and risk to this generation of digital scholars, educators and practitioners. Might we re-conceive the design studio as a venue in which a critical dialogue about how the many facets of architectural design practice are engaged? The possibilities afforded by BIM and Integrated Practice Delivery and digital design technologies are increasingly affecting what we make and simultaneously how we make as architects. Digital modeling of both geometry and information is replacing (or displacing) digital drawing. We see diminishing returns of the value of transforming three-dimensional spatial/formal ideas into two-dimensional conventional abstractions of those complex ideas. This comprehensive thinking promoted by BIM processes is one of the key advantages of using BIM leading to true design innovation. The reiterative learning process of design promoted in BIM promotes a rethinking of design studio education.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_008.pdf
last changed	2012/05/15 20:46

_id	caadria2012_115
id	caadria2012_115
authors	Biswas, Tajin; Tsung-Hsien Wang and Ramesh Krishnamurti
year	2012
title	Data sharing for sustainable assessments: Using functional databases for interoperating multiple building information structures
doi	https://doi.org/10.52842/conf.caadria.2012.193
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 193–202
summary	This paper presents the development and implementation of an automatic sustainable assessment prototype using functional databases. For the practical purpose, we use Leadership in Energy and Environmental Design (LEED) as the exemplar standard to demonstrate the integrative process from building information aggregation to final evaluation. We start with a Building Information model, and use Construction Operations Building Information Exchange (COBie) as a bridge to integrate LEED requirements. At present, the process of sustainable building assessment requires information exchange from various building professionals. However, there is no procedure to manage, or use, information pertaining to sustainability. In our research, we translate rules from LEED into computable formulas and develop a prototype application to produce templates for LEED submission.
keywords	Building information databases; sustainable assessment
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2012_311
id	sigradi2012_311
authors	Bruscato, Underléa Miotto; Costa, Cristiano; Rigo, Sandro; Moura, Humberto
year	2012
title	Processo metodológico para construção do Guia de Turismo Ubíquo para a Rota Cultural Caminhos de Pedra/RS [A Methodological Process to create a Ubiquitous Tourist Guide for cultural routes in Caminhos de Pedra/RS]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 179-182
summary	The tourism is one of the most profitable sectors in the world. Recently, the scientific community has been developing applications using the concepts of mobile and ubiquitous computing in this area of tourism. In this perspective, in the present article we propose a Ubiquitous Tourist Guide that is context-aware. Among the context information used, we highlight tourists’ profiles, their needs and restrictions. We developed a general model of an Electronic Tourist Guide and a specific prototype for the Caminhos de Pedra itinerary, a touristic region in the city of Bento Gonçalves in the Rio Grande do Sul state.
keywords	Ubiquitous Tourism; Virtual Cultural Heritage; Mobile Devices; Interface; Architecture
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2012_65
id	sigradi2012_65
authors	Garagnani, Simone; Mingucci, Roberto; Luciani, Stefano Cinti
year	2012
title	Collaborative design for existing architecture: the Building Information Modeling as a frontier for coordinated process
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 96-100
summary	Building Information Modeling (BIM) has been considered as an emerging collaborative strategy since its introduction, meant for AEC industry and heading to benefits in terms of costs and design quality during the whole building lifecycle. BIM approach, originally developed for new projects, can be successfully applied to existing contexts using TLS surveys to collect point clouds and turn them later into smart digital models, taking advantage of new technologies and methods. This paper addresses these themes paying attention to issues and opportunities, considering BIM as a paramount tool to collect and manage data destined to multiple disciplines
keywords	BIM; laser scanner; AEC digital tools; architectural modeling; collaborative design
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ecaade2012_113
id	ecaade2012_113
authors	Jutraz, Anja ; Zupancic, Tadeja
year	2012
title	Digital system of tools for public participation and education in urban design: Exploring 3D ICC
doi	https://doi.org/10.52842/conf.ecaade.2012.1.383
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 383-392
summary	This article is a starting point for the development of experiential urban co-design interfaces to enhance public participation in local urban projects and to be also used as a communication and collaboration tool in urban design. It is based on the previous research involving 3D city models utilized as understandable design interfaces for the non-technical public (Jutraz, Zupancic, 2011), where we have already explored different views (pedestrian, intermediate and bird’s-eye view), as well as the means by which the information obtained from these different views may be combined by shifting between viewpoints. Previous work was conducted in the “street lab” as well as the Urban Experimental Lab, which was developed specifi cally for the public’s participation in urban planning (Voigt, Kieferle, Wössner, 2009). Presented in this article is the next step that explores the immersive collaboration environment 3D ICC [1], formerly known as Teleplace. The environment was developed for effi cient collaboration and remote communication and shifts the research focus towards questions regarding how to employ both labs as interfaces between the non-technical public and design professionals. As we are facing the lack of digital systems for public participation and education in urban design, different digital tools for communication and collaboration should be combined into a new holistic platform for design. A digital system of tools needs to be developed that supports the urban design decision-making process and focuses on improved final solutions and increased satisfaction amongst all participants. In this article the system of digital tools for public participation, which include communication, collaboration and education, will be also defi ned, with its basic characteristics and its elements.
wos	WOS:000330322400039
keywords	Digital system of tools; collaboration; 3D model; public participation; urban design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2012_274
id	sigradi2012_274
authors	Maing, Minjung
year	2012
title	Virtual Mock-up Simulation of Building Skins for Design to Fabrication Integration
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 467-470
summary	With the growing demand for mock-up integration into late design and pre-construction phases, there is an increasing gap between the virtual design model of the building and the construction model. The gap is reinforced by lack of strong iterative exchanges between design and fabrication and consequently the construction of the building skin systems. This paper will discuss the research being conducted using virtual mock-ups as an earlier insertion of fabrication parameters into design process and presents a solution to bridge this gap. Studies of model integration will be introduced using component-based 3D-CAD modeling to link front and end user scenarios.
keywords	virtual mock-up; fabrication; integration; building skin ; simulation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2016_809
id	caadria2016_809
authors	Nakapan, Walaiporn
year	2016
title	Using the SAMR Model to transform mobile learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2016.809
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 809-818
summary	This paper presents the progress of a pilot classroom, which uses mobile devices to enhance instructor-student classroom interac- tions and students’ learning of the History of Art and Architecture. The main objective of this research was to find a way of improving classroom activities, for the coming year, by making the best possible use of technology to enable students to learn more successfully and improve their understanding of the lesson content. In this paper, class- room activities during 2014 and 2015 are analysed using the SAMR Model coupled with Bloom’s revised taxonomy and the EdTech Quin- tet Model. In addition, a plan for the redesign and improvement of ac- tivities in 2016 is proposed, the effectiveness of the SAMR model at improving in class activities is discussed and a perspective on how to develop the classroom using the “SAMR ladder” is included. The re- sults show that in 2015, 25% of the students in the class achieved an A grade, and less than 5% were graded F compared to 26% in 2012.
keywords	Design education; mobile-based learning; History of Art and Architecture; SAMR model
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2014.761
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2012_59
id	sigradi2012_59
authors	Pinheiro, Mauro; Spitz, Rejane
year	2012
title	Mecanismos atencionais como parâmetros para o design de sistemas de informação ambiente [Attentional mechanisms as parameters for the design of ambient information systems]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 175-178
summary	We present an evaluation model to analyze ambient information systems, based on attentional mechanisms. Taking Weiser and Brown (1996) concepts of Ubiquitous Computing and Calm Technology as a starting point, we delimit ambient information systems as those that can be monitored without requiring the focus of our attention. Using the theoretical framework from Cognitive Psychology, we propose an evaluation model to analyze ambient information systems, considering the attentional mechanisms involved in their use. As a conclusion, we outline a set of parameters to be considered during the design of ambient information systems.
keywords	sistemas de informação; atenção; ambiente; computação ubíqua; tecnologia calma
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2023_259
id	ecaade2023_259
authors	Sonne-Frederiksen, Povl Filip, Larsen, Niels Martin and Buthke, Jan
year	2023
title	Point Cloud Segmentation for Building Reuse - Construction of digital twins in early phase building reuse projects
doi	https://doi.org/10.52842/conf.ecaade.2023.2.327
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 327–336
summary	Point cloud processing has come a long way in the past years. Advances in computer vision (CV) and machine learning (ML) have enabled its automated recognition and processing. However, few of those developments have made it through to the Architecture, Engineering and Construction (AEC) industry. Here, optimizing those workflows can reduce time spent on early-phase projects, which otherwise could be spent on developing innovative design solutions. Simplifying the processing of building point cloud scans makes it more accessible and therefore, usable for design, planning and decision-making. Furthermore, automated processing can also ensure that point clouds are processed consistently and accurately, reducing the potential for human error. This work is part of a larger effort to optimize early-phase design processes to promote the reuse of vacant buildings. It focuses on technical solutions to automate the reconstruction of point clouds into a digital twin as a simplified solid 3D element model. In this paper, various ML approaches, among others KPConv Thomas et al. (2019), ShapeConv Cao et al. (2021) and Mask-RCNN He et al. (2017), are compared in their ability to apply semantic as well as instance segmentation to point clouds. Further it relies on the S3DIS Armeni et al. (2017), NYU v2 Silberman et al. (2012) and Matterport Ramakrishnan et al. (2021) data sets for training. Here, the authors aim to establish a workflow that reduces the effort for users to process their point clouds and obtain object-based models. The findings of this research show that although pure point cloud-based ML models enable a greater degree of flexibility, they incur a high computational cost. We found, that using RGB-D images for classifications and segmentation simplifies the complexity of the ML model but leads to additional requirements for the data set. These can be mitigated in the initial process of capturing the building or by extracting the depth data from the point cloud.
keywords	Point Clouds, Machine Learning, Segmentation, Reuse, Digital Twins
series	eCAADe
email
last changed	2023/12/10 10:49

_id	sigradi2017_077
id	sigradi2017_077
authors	Soto Muñoz, Jaime; Jesús Pulido Arcas, Rodrigo García Alvarado, Gastón Arias Aravena
year	2017
title	La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile [La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.528-533
summary	BIM technology is currently being implemented in the construction industry, though it is still underdeveloped in relation to Facility Management (FC) of extant buildings. There is a strong potential for future development due to the visualization and data analysis capabilities of this technology, amongst others (Becerik-Gerber, Jazizadeh, Li, & Calis, 2012). This research investigates how BIM can be implemented in existing buildings currently in operation. Using a public facility at the University of Bio-Bio as a case study, conclusions are drawn with respect the capabilities of BIM in order to optimize maintenance and operation of existing buildings.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ijac201210104
id	ijac201210104
authors	Ambrose, Michael A.
year	2012
title	Agent Provocateur - BIM In The Academic Design Studio
source	International Journal of Architectural Computing vol. 10 - no. 1, 53-66
summary	Building Information Modeling challenges academia to question the fundamental roles of abstraction and simulation in design education. Architectural education and practice assume a traditional set of visual conventions at varied scales and levels of detail, that when taken in concert signifies a whole, complete idea of a building, a correspondence between design intent and interpretation, between the representation of ideas and the design of buildings. BIM viewed as provocateur to these assumptions provides potential critical analysis of how architectural design is taught. Academia must seek out new design methodologies for exploring architecture that reflect the representational shift of BIM by developing teaching methods that reprioritize ways of seeing, thinking and making. This paper describes a studio model that seeks out new active methods for exploring architecture that embrace this shift by developing processes that provoke novel ways to reconcile the traditions of abstraction and the opportunities of synthetic simulation.
series	journal
last changed	2019/07/30 10:55

_id	ecaade2012_161
id	ecaade2012_161
authors	Araujo, Bruno; Jorge, Joaquim; Duarte, Jose
year	2012
title	Combining Virtual Environments and Direct Manipulation for Architectural Modeling
doi	https://doi.org/10.52842/conf.ecaade.2012.2.419
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 419-428
summary	In this paper we present an environment for conceptual design which mimicsthe interaction of designers with physical mockups. We present novel three dimensional on-and-above-the-surface interactive techniques which combine asymmetric bimanual operations with multi-touch direct manipulation on a fl at surface and depth cameras. These take advantage of a continuous interaction space to create and edit 3D models in a stereoscopic environment. To allow modeling architectural shapes directly, we combine hand and finger tracking in the space above the table with multi-touch on its surface without the need to change modes. This provides an alternative design environment where users can seamlessly switch between interacting on the surface or in the space above it depending on the task, which makes it easier to model complex shapes using simple operations.
wos	WOS:000330320600044
keywords	3D Modeling; 3D User Interfaces; Virtual Reality; Procedural Modeling
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: