Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201210202
id	ijac201210202
authors	Bates-Brkljac, Nada
year	2012
title	Photorealistic Computer Generated Representations as a Means of Visual Communication of Architectural Schemes in the Contemporary Culture
source	International Journal of Architectural Computing vol. 10 - no. 2, 185-204
summary	This paper explores the nature and effects of photorealistic computer generated architectural representations on the perception and understanding of design schemes.The aim is to obtain an insight into potentials and limitations that arise from this form of communication. Findings suggest that by conveying a sense of lifelike presence, these representations enhance the understanding of design.They are also perceived as more realistic, accurate and comprehensible and as such, more effective means of communicating design than hand drawings. However, not all photorealistic styles are perceived as neither lifelike nor credible. Instead, it was evident that these representations enter perceptions through a complex interaction between their attribute and observers familiarity with form and visual literacy. Most importantly, the understanding of design through photorealistic representations is deeply conditioned by the prevailing cultural style of visual representation and knowledge of the preferences of specific professions.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	ijac201210108
id	ijac201210108
authors	Celani, Gabriela; Carlos Eduardo Verzola Vaz
year	2012
title	CAD Scripting and Visual Programming Languages for Implementing Computational Design Concepts: A Comparison from a Pedagogical Point of View
source	International Journal of Architectural Computing vol. 10 - no. 1, 121-138
summary	This paper compares the use of scripting languages and visual programming languages for teaching computational design concepts to novice and advanced architecture students. Both systems are described and discussed in terms of the representation methods they use. With novice students better results were obtained with the visual programming language. However, the generative strategies used were restricted to parametric variation and the use of randomness. Scripting, on the other hand, was used by advanced students to implement rule-based generative systems. It is possible to conclude that visual languages can be very useful for making architecture students understand general programming concepts, but scripting languages are fundamental for implementing generative design systems. The paper also discusses the importance of the ability to shift between different representation methods, from more concrete to more abstract, as part of the architectural education.
series	journal
last changed	2019/07/30 10:55

_id	sigradi2012_333
id	sigradi2012_333
authors	da Silva, Isabelle Maria Mensato; Viz, Simone Helena Tanoue
year	2012
title	Ensino de Arquitetura e Urbanismo com auxilio de ferramentas digitais [Teaching Architecture and Urbanism with help of digital tools]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 522-526
summary	This article aims to discuss the importance of freehand drawings in the architectural projective process in the context of the digital age, through the use of tablets. It is intended to identify how these drawings, using tablets, keep the perception and the personal dash of each one. This research aims not only to review and update the drawing´s disciplines in the architecture courses - its practices and procedures - but also to discuss the actual role of representation - analogical or digital - and its interaction with others disciplines. The first research, done in 2011, indicated possibilities of interface with CAD, Revit and Sketch-up. The second part, in course in this year, 2012, is trying to experiment the use of tablets in three others disciplines: History of Architecture and Urbanism I, Landscaping and Project I, in the Instituto de Arquitetura e Urbanismo da USP, São Carlos, Brasil.
keywords	freehand drawing, graphic, tablet, digital media
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
doi	https://doi.org/10.52842/conf.caadria.2015.765
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2012_004
id	ascaad2012_004
authors	El-Masri, Souheil; Mazen Kana’an and Mohammed Fawzi Elanany
year	2012
title	Architecture, Digital Techniques & Project Management
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 14-20
summary	With the invention of computers, Architecture and other Engineering disciplines have undergone revolutionary developments offering new opportunities for improving efficiency and opening new frontiers for creativity. For example in architecture and urban planning, the discussions have been extended from conventional writings to cover cyberspace, virtual architecture and digital city. Moreover, computers have helped in the realization of many complex projects that would be inconceivable with traditional drawing techniques. This is clearly demonstrated in the works of Frank Gehry's, Zaha Hadid, Daniel Libeskind and many others. In deed, digital techniques have changed the design creative process and how the architects think. Traditionally the structured development architectural ideas from 2D drawings (plans, sections, elevations) towards 3D resolution has been replaced by more interactive approach of 2D & 3D. The changes that digital techniques have brought to the field of Architecture; including practice and education, can obviously be viewed from different angles and incite many discussions and questions. However, the purpose of this presentation is to discuss the role of digital techniques within the overall framework of project management in Gulf Housing Engineering. It starts the discussion with a brief on architecture and digital techniques in the Gulf Region, especially during the “boom period”; a period characterized by rapid production of buildings relying heavily on virtual images. It is against this background, the role of digital techniques is evaluated from a practice point of view. In fact in GHE, digital means are integral parts of the holistic project delivery process starting form initiation, to various design stages to construction ending with project completion. In this process emphasis is paid to the inter-relationships between IT Systems and Quality Control which in turn facilitate measuring, monitoring and reporting on various managerial, technical and design and budgetary aspects of the project. The presentation is supported by real case studies of GHE portfolio. It emphasizes that digital techniques should be an integral part of an overall process and should be seen as means to enhance efficiency and creativity; and should contribute to the betterment of the built environment
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_004.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_011
id	ascaad2012_011
authors	Hemsath, Timothy L.
year	2012
title	Hybridizing Digital Fabrication Techniques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 103-114
summary	The use of digital fabrication in the production and making of architecture is becoming a prevalent vehicle for the design process. As a result, there is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, parametric modeling and digital fabrication in student education. This paper will highlight three student projects that look to ingrate computational prototyping with digital fabrication techniques in the production of architecture. The goal is to hybridize fabrication techniques of sectioning, tessellating and folding to educate students in CAD, CAM, parametric modeling and digital fabrication. Rather than repeating conventional approaches or recreating from precedent, mixing techniques challenges students to understand the CAD technique or parameters for modeling, translate for CAM production and deal with real world constraints of materials, time and tectonics. In the end, these projects are critical of the digital and projectively speculate on the architectural detail in an age of digital ubiquity.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_011.pdf
last changed	2012/05/15 20:46

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
doi	https://doi.org/10.52842/conf.caadria.2012.337
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_86
id	ecaade2012_86
authors	QaQish ; Ra’Ed K.
year	2012
title	15 Years of CAD Teaching in Jordan: How Much Has Been Accomplished? A Comparative Analysis of the Use of CAD in Architectural Schools Between 1997 and 2012
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 23-32
doi	https://doi.org/10.52842/conf.ecaade.2012.2.023
wos	WOS:000330320600001
summary	The paper reports on a study which examines the evolution in architectural education trends arising from the changes brought about by both Socioeconomic Factors and the implications of CAAD in the last 15 years in Jordanian universities. The findings reflect the views of thirteen (13) architecture faculties/schools through a nation-wide questionnaire survey conducted in the spring of 2012. The survey was structured to cover both private and public universities in Jordan, represented by faculties of engineering, architecture and design. Structurally, the main fi ndings of this study are summarized under six areas, namely: 1) General Students’ Information, 2) Demographic and Socioeconomic Factors, 3) CAD Competences amongst both Staff and Students, 4) Program of Study and CAD Courses, 5) Overall Satisfaction of CAD Courses and Training , 6) CAD and Social Networks. The majority of student respondents were females (144) (53.3%). The top laptop brands used were HP (17%) Toshiba (12.2%) and Dell (7.8%). The CAD packages found to be most highly used throughout universities were AutoCAD, 3D Max, Sketch-up, and Adobe Suite. The importance of new technologies, electronic book, and the social network aspects in enhancing CAD and 3D modeling software integration with the design studio was affi rmed yet no relationship to the gender was noted.
keywords	CAD Integration, Socioeconomic Factors
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_176
id	ecaade2012_176
authors	Tessmann, Oliver
year	2012
title	Topological Interlocking Assemblies
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 211-219
doi	https://doi.org/10.52842/conf.ecaade.2012.2.211
wos	WOS:000330320600021
summary	Topological interlocking is a concept developed in material science. Solid modules form a structural system without the use of glue or mortar. Given fixed boundaries the elements constrain each other kinematically. This project seeks to re-conceptualize the system within an architectural framework by embracing computational design, analysis and fabrication tools and procedures. The goal is to develop geometrical differentiated, reversible, force-locked systems and the processes and methods to design and manufacture them. Students of the Architecture and Performative Design Studio (APD) at the Staedelschule Architecture Class (SAC) and the author developed the presented projects. The paper discusses the pedagogical approach of starting a design research studio from a very narrow material system. The research is continued at the School of Architecture of the Royal Institute of Technology (KTH) in Stockholm.
keywords	Digital Fabrication; Parametric Design; Topology, Structure; Modular
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_253
id	ecaade2012_253
authors	Wang, Chun-Yang; Przybylo, Jakob; Ma, Haidong
year	2012
title	The Preliminary Process of Synthetic Digital Fabrication: In Terms of Sheet Metal Facade
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 459-467
doi	https://doi.org/10.52842/conf.ecaade.2012.2.459
wos	WOS:000330320600048
summary	With the development and maturity of various digital media, architectural design process has gained considerable more freedom as compared with modernism. Digitalized virtual environment and advanced industrial machines are continuously been discussed and applied to experimental projects, creating astonishing architectural shapes which have been diffi cult to create in the past. Under such digital architectural trend, this research analyzed various digital fabrication methods through different architectural projects. By comparing the properties and processes of each fabrication manner, we aim to come up with a preliminary framework of an executable fabrication process which synthesized advantages from multiple fabrication methods.
keywords	Digital fabrication; Industrial robot; Sheet metal; CAD / CAM
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_143
id	ecaade2012_143
authors	Both, Petra von
year	2012
title	Potentials and Barriers for Implementing BIM in the German AEC Market: Results of a Current Market Analysis
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 151-158
doi	https://doi.org/10.52842/conf.ecaade.2012.2.151
wos	WOS:000330320600015
summary	The research project „BIM – Potentials and Barriers“ aims to analyse the existing practice concerning BIM and the barriers for the implementation of this approach in Germany. Accompanied by an ‚advisory board’ with nameable representatives from practice, the public authorities and AEC associations, a set of hypotheses has been elaborated that could be evaluated by a detailed survey. Based on the detection of relevant stakeholders, the survey fi rst tries to disclose the real situation of how BIM is currently used in practice. Furthermore the potentials of the application of BIM in the different processes and target groups are determined as well as the barriers and constraints. Thereby the enhancement of the considered thematic areas is an important solution approach of the project: besides technological aspects, the analysis is also focusing on contracting, norms and processes as well as education, knowledge and role perception.
keywords	BIM; survey; collaborative engineering; virtual engineering; product modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_142
id	ecaade2012_142
authors	Shin, Dongyoun; Arisona, Stefan Müller; Georgakopoulou, Sofia; Schmitt, Gerhard; Kim, Sungah
year	2012
title	A Crowdsourcing Urban Simulation Platform on Smartphone Technology: Strategies for Urban Data Visualization and Transportation Mode Detection
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 377-384
doi	https://doi.org/10.52842/conf.ecaade.2012.2.377
wos	WOS:000330320600039
summary	We propose a crowdsourcing simulation environment that brings human intention into the urban simulator. Our fundamental goal is to simulate urban sustainability by employing direct human interaction. In this paper we present a prototype mobile phone application that implements a novel transportation mode detection algorithm. The mobile phone application runs in the background and continuously collects data from the built-in acceleration and network location sensors. The collected data is analyzed by the transportation mode detection algorithm and automatically partitioned into activity segments. A key observation of our work is that walking activity can be robustly detected in the data stream and acts as a separator for partitioning the data stream into other activity segments. Each vehicle activity segment is then sub-classifi ed according to the type of used vehicle. Our approach yields high accuracy despite the low sampling interval and not requiring GPS data that bring minimized device power consumption. Ultimately, the collected information can be translated into real-time urban behavior and will indicate sustainability, both on the personal and the city level.
keywords	Crowdsourcing simulation platform; transport mode detection; social sensing; urban sustainability; mobile application
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2012_009
id	ascaad2012_009
authors	Abdelmohsen, Sherif
year	2012
title	Genres of Communication Interfaces in BIM-Enabled Architectural Practice
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 81-91
summary	This paper explores the interaction and different types of representations enacted in a BIM-enabled environment that involves interdisciplinary and intradisciplinary collaboration among teams of designers in an architectural praxis context. By means of an ethnographic study conducted over the course of an architectural project from schematic design to construction documents, including five disciplines and twenty subjects, genres of communication interfaces are identified between BIM-authoring tools, sketching interfaces and domain specific analysis tools, and explored within the realm of distributed cognition. Implications in architectural practice and education are then discussed.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_009.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.2
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
doi	https://doi.org/10.52842/conf.ecaade.2012.1
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_066
id	caadria2012_066
authors	Ahmad, Sumbul
year	2012
title	The representation of type in grammatical design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 425–432
doi	https://doi.org/10.52842/conf.caadria.2012.425
summary	Grammatical design is useful for the generation of a set of related designs. The concept of type aids designers in generating designs with a specified structure. However, existing studies in grammar are ambiguous in their definition of type in the language of designs generated by a grammar. Extending our previous study of defining style in grammar, this paper provides a formal definition of the concept of type in the language of designs generated by a grammar. This is done with the help of a description scheme which is developed by augmenting grammar primitives and spatial relations with descriptors. The description scheme allows the computation of descriptors for designs generated from grammar thus making possible the comparison of various design types in the language of a grammar. Such a description scheme for defining design types is especially significant for less restricted grammars that generate a large number of designs that are varied in nature. A formal definition of type in grammars allows users to sift through designs with particular features, and thus select desired designs.
keywords	Type; Design grammars; generative design; description scheme; product design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
wos	WOS:000330322400051
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: