Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 541

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_491
id	acadia12_491
authors	Feringa, Jelle ; Søndergaard, Asbjørn
year	2012
title	An Integral Approach to Structural Optimization and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2012.491
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 491-497
summary	Abstract Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure. A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase, the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive. This paper reports ongoing research efforts on the development of a cost effective methodology for the realization of TO concrete structures using HWC.
keywords	Topology optimization , robotics , hotwire cutting , ruled surfaces , advanced concrete structures , formwork , EPS
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	acadia12_209
id	acadia12_209
authors	Larsen, Niels Martin ; Pedersen, Ole Egholm ; Pigram, Dave
year	2012
title	A Method for the Realization of Complex Concrete Gridshell Structures in Pre-Cast Concrete
doi	https://doi.org/10.52842/conf.acadia.2012.209
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 209-216
summary	This paper describes a method for the design and fabrication of complex funicular structures fromdiscrete precast concrete elements. The research proposes that through the integration of digitalform-finding techniques, computational file-to-fabrication workflows, and innovative sustainableconcrete casting techniques, complex funicular structures can be constructed using prefabricatedelements in a practical, affordable, and materially efficient manner.A recent case study is examined, in which the methodology has been used to construct a pavilion.Custom-written dynamic relaxation software was used to define the overall form and successivealgorithms; it then defined each component’s unique geometry, unrolled into flat shapes, andnested all parts into cut-files. PETG plastic sheets were two-dimensionally laser cut and folded toproduce the unique casting molds. The case study was carried out in collaboration between theAarhus School of Architecture and the University of Technology, Sydney (UTS). Basic research incasting techniques defined the framework for the design process, and a custom-written dynamicrelaxation software application became the primary form-generating tool in the design process ofa constructed pavilion. Fabrication and construction constraints were embedded within the designof both the overall structure and its components. Finite element analysis [FEA] was completed inorder to verify the form-finding results, to ensure structural stability, and to direct adjustments ofthe structure during the design process.The constructed pavilion case study, constructed in a very short time, for low cost and with relativelyunskilled labor, demonstrates that the integration of algorithmic form-finding techniques, CNCfabrication workflows, and the use of innovative PETG folded-mold techniques enables thepractical realization of freeform funicular structures in precast concrete.
keywords	Gridshells , pre-cast concrete , folded moulds , dynamic relaxation , file-to-factory , form-finding , parametric modeling , computational design , zero-waste production
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2012_110
id	caadria2012_110
authors	McGee, Wes; David Pigram and Maciej P. Kaczynski
year	2012
title	Robotic reticulations: A method for the integration of multi-axis fabrication processes with algorithmic form-finding techniques
doi	https://doi.org/10.52842/conf.caadria.2012.295
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 295–304
summary	This paper addresses the design and fabrication of non-uniform structural shell systems. Structural shells, particularly gridshells, have a long history but due to their complexity and the accompanying high cost of construction, their application has been limited. The research proposes a method for integrating the design and fabrication processes such that complex double curved reticulated frames can be constructed efficiently, from prefabricated components, requiring significantly less formwork than is typical. A significant aspect of the method has been the development of software tools that allow for both algorithmic form-finding and the direct control of robotic fabrication equipment from within the same modelling package. A recent case-study is examined where the methodology has been applied to construct a reticulated shell structure in the form of a partial vault. Components were prefabricated using 6-axis robotic fabrication equipment. Individual parts are designed such that the assembly of components guides the form of the vault, requiring no centring to create the desired shape. Algorithmically generated machine instructions controlled a sequence of three tool changes for each part, using a single modular fixture, greatly increasing accuracy. The complete integration of computational design techniques and fabrication methodologies now enables the economical deployment of non-uniform structurally optimised reticulated frames.
keywords	Reticulated frame; robotic fabrication; dynamic relaxation; form-finding; computational design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2014_252
id	sigradi2014_252
authors	Pina Calafi, Alfredo; Benoit Bossavit, Isabel Sanchez Gil, Aitziber Urtasun, Benoit Bossavit
year	2014
title	Oteiza en movimiento: una herramienta tecnológica para el aprendizaje participativo en el Museo Oteiza [Oteiza in motion a tool for a collaborative learning at the Oteiza museum]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 255-258
summary	This paper presents an interdisciplinary work done at the Museum Oteiza near Pamplona, Spain during 2012 and 2013. The main goal is the use of low cost devices that allows natural interaction, Virtual and Augmented Realities to get the general public closer to the works and concepts of Oteiza through interactive serious games. The most difficult Oteiza’s concepts to understand are those related with the empty space or with time & space. We propose three different activities, shaped as serious game, that use the whole body to interact and play with these concepts. The result is a facility that has been installed at the entrance of the Museum and that can be used for free, before or after a visit to the museum. These activities were presented to 4 experts in Oteiza and the results are discussed. In addition, we gathered more comments after several groups of children tried the application in the museum.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
doi	https://doi.org/10.52842/conf.acadia.2012.391
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_169
id	acadia12_169
authors	Helm, Volker ; Ercan, Selen ; Gramazio, Fabio ; Kohler, Matthias
year	2012
title	In-Situ Robotic Construction: Extending the Digital Fabrication Chain in Architecture
doi	https://doi.org/10.52842/conf.acadia.2012.169
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 169-176
summary	In this paper, viable applications of mobile robotic units on construction sites are explored. While expanding on potential objectives for in-situ fabrication in the construction sector, the intention is also to build upon innovative man-machine interaction paradigms to deal with the imprecision and tolerances often faced on construction sites. By combining the precision of the machine with the cognitive environmental human skills, a simple but effective mobile fabrication system is experimented for the building of algorithmically designed additive assemblies that would not be possible through conventional manual methods if the large amount of individual building blocks and the size of the structure to be built are taken into account. It is believed that this new approach to man-machine collaboration, aimed at a deeper integration of human ability with the strengths of digitally controlled machines, will result in advances in the construction sector, thus opening up new design and application fields for architects and planners.
keywords	in-situ robotic fabrication , mobile robotics , 1:1 scale fabrication , additive assembly , algorithmically designed structures , man-machine interaction , cognitive , object recognition , construction site
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2012_95
id	ecaade2012_95
authors	Ladurner, Georg; Gabler, Markus; Menges, Achim; Knippers, Jan
year	2012
title	Interactive Form-Finding for Biomimetic Fibre Structures: Development of a Computational Design Tool and Physical Fabrication Technique Based on the Biological Structure of the Lichen
doi	https://doi.org/10.52842/conf.ecaade.2012.2.519
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 519-529
summary	This contribution shows a biomimetic approach to design and produce fibrous structural elements derived from the morphology of the biologic archetype ‘the lichen’. The physical form fi nding strategy allows for a novel self-organised reinforcement for fibrous composite systems. A computational design tool has been developed, based on the fi ndings of various physical models. The digital device allows for shape control and therefore an interaction to and manipulation of the fabrication process. Since the form fi nding algorithms of the tool are based on physical experiments,every geometry is derived through the program and has its counterpart in production. For example: the fibre density in the model can be adjusted which leads to different geometries. In production the chosen denseness is utilised, thus, the production yields automatically to the desired load-optimized geometry found in the form-finding tool.
wos	WOS:000330320600055
keywords	Biomimetics; Form-finding; Self-organization; Emergence; Fibre structures
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
doi	https://doi.org/10.52842/conf.caadria.2012.337
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2012_003
id	ascaad2012_003
authors	Elseragy, Ahmed
year	2012
title	Creative Design Between Representation and Simulation
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 11-12
summary	Milestone figures of architecture all have their different views on what comes first, form or function. They also vary in their definitions of creativity. Apparently, creativity is very strongly related to ideas and how they can be generated. It is also correlated with the process of thinking and developing. Creative products, whether architectural or otherwise, and whether tangible or intangible, are originated from ‘good ideas’ (Elnokaly, Elseragy and Alsaadani, 2008). On one hand, not any idea, or any good idea, can be considered creative but, on the other hand, any creative result can be traced back to a good idea that initiated it in the beginning (Goldschmit and Tatsa, 2005). Creativity in literature, music and other forms of art is immeasurable and unbounded by constraints of physical reality. Musicians, painters and sculptors do not create within tight restrictions. They create what becomes their own mind’s intellectual property, and viewers or listeners are free to interpret these creations from whichever angle they choose. However, this is not the case with architects, whose creations and creative products are always bound with different physical constraints that may be related to the building location, social and cultural values related to the context, environmental performance and energy efficiency, and many more (Elnokaly, Elseragy and Alsaadani, 2008). Remarkably, over the last three decades computers have dominated in almost all areas of design, taking over the burden of repetitive tasks so that the designers and students can focus on the act of creation. Computer aided design has been used for a long time as a tool of drafting, however in this last decade this tool of representation is being replaced by simulation in different areas such as simulation of form, function and environment. Thus, the crafting of objects is moving towards the generation of forms and integrated systems through designer-authored computational processes. The emergence and adoption of computational technologies has significantly changed design and design education beyond the replacement of drawing boards with computers or pens and paper with computer-aided design (CAD) computer-aided engineering (CAE) applications. This paper highlights the influence of the evolving transformation from Computer Aided Design (CAD) to Computational Design (CD) and how this presents a profound shift in creative design thinking and education. Computational-based design and simulation represent new tools that encourage designers and artists to continue progression of novel modes of design thinking and creativity for the 21st century designers. Today computational design calls for new ideas that will transcend conventional boundaries and support creative insights through design and into design. However, it is still believed that in architecture education one should not replace the design process and creative thinking at early stages by software tools that shape both process and final product which may become a limitation for creative designs to adapt to the decisions and metaphors chosen by the simulation tool. This paper explores the development of Computer Aided Design (CAD) to Computational Design (CD) Tools and their impact on contemporary design education and creative design.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_003.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_061
id	ecaade2012_061
authors	Macris, Vincent ; Weytjens, Lieve ; Geyskens, Kenny ; Knapen, Marc ; Verbeeck, Griet
year	2012
title	Design Guidance for Low-Energy Dwellings in Early Design Phases: Development of a simple design support tool in SketchUp
doi	https://doi.org/10.52842/conf.ecaade.2012.1.691
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 691-699.
summary	Considering the energy effi ciency and comfort levels of dwellings, stricter legislation will be applied towards 2020. To reach these requirements, an insight into the energy effi ciency becomes essential from the start of a design. However, the uptake of building simulation tools by architects and students to evaluate the energy performance during the architectural design process remains very limited, mainly due to the complexity of these tools. Therefore, this research aims at early design support through an easy-to-use application adapted to the modelling logic of a designer. As architects often use simple CAAD design tools for design exploration, a prototype was established in Google SketchUp. In this context, the paper presents the development of a support tool for low-energy dwellings in early design phases, allowing designers to quickly assess the thermal comfort and energy performance of early design alternatives.
wos	WOS:000330322400073
keywords	Design support tool; Energy; SketchUp; Architectural design process; Output
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2012_85
id	ecaade2012_85
authors	Meyboom, AnnaLisa
year	2012
title	Tuning Heavy Design: Parametric Structural Form Generation
doi	https://doi.org/10.52842/conf.ecaade.2012.2.567
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 567-572
summary	This paper discusses a methodology for generating architectural form parametrically from structural logics such that an architectural vocabulary can be generated for use in design. It intends to further the discussion of how parametrics can play a role in architectural design. Parametric applications are facilitating the use of engineering design feedback into the architectural process, allowing architects to ‘tune’ their designs. In this case, structural form is discussed. The nature of parametrics makes the use of structural principles relatively simple because they are already in the numeric form of equations. As well, parametrics make the generation of alternatives easy because of the iterative nature of the tool. As such, including the basis of structural principles in the logic of the parametrics allows the design to function performatively in both an architectural and a structural sense.
wos	WOS:000330320600060
keywords	Parametric; form finding; structural analysis; algorithmic
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2012_187
id	sigradi2012_187
authors	Sharif, Shani; Gentry, T Russell; Yen, Jeannette; Goodman, Jose N
year	2012
title	Kinetic Solar Panels: A Transformative and Expandable Geometric System for Photovoltaic Structures
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 649-652
summary	This paper focuses on the applications of geometrically transformable and expandable structures with deployed “energy production mode and retracted “wind shedding” mode to replace the fixed photovoltaic (PV) panels and racking systems currently used in buildings rooftop installations. The significance of this expandable geometric system relies on its embedded motion grammar, i.e. rotation and translation transformations, in the system. The research draws inspiration from reconfiguration of compound tree leaves in nature, and addresses issues of redesign and modeling challenges that led to digital fabrication of the prototype.
keywords	Kinetic system, photovoltaic panels, geometric transformation, motion grammar, parametric modeling
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	caadria2012_120
id	caadria2012_120
authors	Fukuda, Tomohiro; Tian Zhang, Ayako Shimizu, Masaharu Taguchi, Lei Sun and Nobuyoshi Yabuki
year	2012
title	SOAR: Sensor oriented mobile augmented reality for urban landscape assessment
doi	https://doi.org/10.52842/conf.caadria.2012.387
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 387–396
summary	This research presents the development of a sensor oriented mobile AR system which realises geometric consistency using GPS, a gyroscope and a video camera which are mounted in a smartphone for urban landscape assessment. A low cost AR system with high flexibility is realised. Consistency of the viewing angle of a video camera and a CG virtual camera, and geometric consistency between a video image and 3DCG are verified. In conclusion, the proposed system was evaluated as feasible and effective.
keywords	Landscape assessment; augmented reality; mobile device; geometric consistency; GPS
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2012_066
id	caadria2012_066
authors	Ahmad, Sumbul
year	2012
title	The representation of type in grammatical design
doi	https://doi.org/10.52842/conf.caadria.2012.425
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 425–432
summary	Grammatical design is useful for the generation of a set of related designs. The concept of type aids designers in generating designs with a specified structure. However, existing studies in grammar are ambiguous in their definition of type in the language of designs generated by a grammar. Extending our previous study of defining style in grammar, this paper provides a formal definition of the concept of type in the language of designs generated by a grammar. This is done with the help of a description scheme which is developed by augmenting grammar primitives and spatial relations with descriptors. The description scheme allows the computation of descriptors for designs generated from grammar thus making possible the comparison of various design types in the language of a grammar. Such a description scheme for defining design types is especially significant for less restricted grammars that generate a large number of designs that are varied in nature. A formal definition of type in grammars allows users to sift through designs with particular features, and thus select desired designs.
keywords	Type; Design grammars; generative design; description scheme; product design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
wos	WOS:000330322400051
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_247
id	ecaade2012_247
authors	Balaban, Özgün; Kilimci, Elif Sezen Yagmur; Cagdas, Gülen
year	2012
title	Automated Code Compliance Checking Model for Fire Egress Codes
doi	https://doi.org/10.52842/conf.ecaade.2012.2.117
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 117-125
summary	Architecture today has come to its most complex form. There are lots of criteria such as fi re safety, structure, sustainability etc… which must be controlled by the designers. To improve the performance and accessibility of buildings, governing bodies publish different codes for each of the different criteria. Buildings must comply with these codes to get a permit for construction. The checking of the buildings according the codes is done manually by code offi cials. This process is time consuming, high in cost and prone to errors. To remedy this problem by using the tools like BIM and AI, systems that can automatically check the code compliance of projects are being developed. In this paper we provide an overview of the structures and capabilities of these systems and present the automated code compliance checking system that we develop for checking building models against some parts of the Turkish Fire Codes.
wos	WOS:000330320600011
keywords	Automated Code Compliance Checking; Fire Codes; BIM
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2012_081
id	caadria2012_081
authors	Beorkrem, Christopher; Niki DesImini, Mitch McGregor and Igor Polakov
year	2012
title	Sphere mapping: A method for a responsive surface design
doi	https://doi.org/10.52842/conf.caadria.2012.527
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 527–536
summary	The method proposed in this project addresses the parametric manipulation of a given pattern to respond directly to a pre-defined surface. Continuing the research of Kevin Rotheroe, Yale University and founder of FreeForm Design. Rotheroe has developed a series of studies in material and surface properties. By utilising a proven pattern, the proposed method sets parameters derived from the formal properties of the original pattern and produces a new pattern that is responsive to the curvature of a complex surface. The workflow developed in this research consists of a complex blending of tools in Grasshopper and Gehry Technologies Digital Project. The intent is to achieve the aesthetics and structure offered by Rotheroe’s original research and to add a responsive precision that provides an accurate adaptation of the pattern based on curvature of a specific computationally defined surface.
keywords	Geometric systems; parametrics; material constraints
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201210406
id	ijac201210406
authors	Biswas, Tajin; Ramesh Krishnamurti
year	2012
title	Data Sharing for Sustainable Building Assessment
source	International Journal of Architectural Computing vol. 10 - no. 4, 555-574
summary	Sustainable design assessment requires information, which is aggregated from different phases of a building design, and evaluated according to criteria specified in a ‘sustainable building rating system.’ In the architecture engineering and construction (AEC) domain much of the necessary information is available through open source data standards such as Industry Foundation Classes (IFC). However, no single standard that provides support for sustainability assessment completely suffices as a data structure. This paper explores the augmentation of the Construction Operations Building information exchange (COBie) model, as an intermediary data structure, to bridge between requirements of the Leadership in Energy and Environmental Design (LEED) rating system and a building information model. Development of a general framework for data sharing and information management for LEED assessments is illustrated through an implementation of a prototype using functional databases.The prototype checks and augments available data as needed, which is used to populate LEED submission templates.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
wos	WOS:000330322400077
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
doi	https://doi.org/10.52842/conf.acadia.2012.511
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: