Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2012.047
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_302
id	ecaade2012_302
authors	Colakoglu, Birgül; Durmisevic, Elma; Pasic, Adnan
year	2012
title	International Collaborative Design Studio: Green Transformable Buildings
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 107-114
doi	https://doi.org/10.52842/conf.ecaade.2012.2.107
wos	WOS:000330320600010
summary	Current trends in architectural practice such as an increased focus on sustainable design, integrated design, and the globalization of architecture are increasing the need for practitioners that are skilled in collaboration. Collaboration fosters innovation and creativity. It is a key operating principle for the 21st century and an important skill that an architecture student must be exposed to. The change in knowledge generation and creative problem solving is transforming education towards collaborative learning forcing architecture and engineering schools to address new course structures with “collaborative” aspect. The work presented in this paper draws its base from collaborative design learning. It describes an international collaborative design studio titled “International Design Studio: Green Transformable Buildings” conducted between three institutions, Y_ld_z Technical University (YTU)–Istanbul, University of Twente (TU)-Enschede Engineering Sciences and Industrial Design School, and Architecture Faculty of Sarajevo (AFS).
keywords	Collaborative design; collaborated learning; team work; design process
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2012_225
id	ecaade2012_225
authors	Santos, Luís; Lopes, José; Leitao, António
year	2012
title	Collaborative Digital Design: When the Architect Meets the Software Engineer
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 87-96
doi	https://doi.org/10.52842/conf.ecaade.2012.2.087
wos	WOS:000330320600008
summary	Increasingly more architects use programming as a means for form finding and design exploration, a tendency that is expected to continue. Even though significant progress has been made in the simplifi cation of programming languages, complex design tasks might still require large coding efforts. We do not think it is wise to force architects to also become experts in programming languages and software engineering. Instead, similarly to what happened with other design and building disciplines, we think that the future of digital design lies in the collaborative effort of architects and software engineers. In this paper we analyze different situations where such collaboration increases productivity and frees the architect to more creative tasks.
keywords	Architecture; Software Engineering; Design; Collaborative process; CAD tools
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2012_107
id	caadria2012_107
authors	Gerber, David and A. Senel Solmaz
year	2012
title	PARA-Typing the making of difference: Associative parametric design methodologies for teaching the prototyping of material affect
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 233–242
doi	https://doi.org/10.52842/conf.caadria.2012.233
summary	PARA-Typing the Making of Difference presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. These design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation. Then through associative parametric design technologies and methodologies, modular fields were design explored and developed in concert with material properties and constraints. Utilising digital fabrication full-scale installations were designed, manufactured, and constructed as tiled walls that created differentiated space within site-specific configurations.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; tectonics
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2012_011
id	ascaad2012_011
authors	Hemsath, Timothy L.
year	2012
title	Hybridizing Digital Fabrication Techniques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 103-114
summary	The use of digital fabrication in the production and making of architecture is becoming a prevalent vehicle for the design process. As a result, there is a growing demand for computer-aided design (CAD) skills, computer-aided manufacturing (CAM) logic, parametric modeling and digital fabrication in student education. This paper will highlight three student projects that look to ingrate computational prototyping with digital fabrication techniques in the production of architecture. The goal is to hybridize fabrication techniques of sectioning, tessellating and folding to educate students in CAD, CAM, parametric modeling and digital fabrication. Rather than repeating conventional approaches or recreating from precedent, mixing techniques challenges students to understand the CAD technique or parameters for modeling, translate for CAM production and deal with real world constraints of materials, time and tectonics. In the end, these projects are critical of the digital and projectively speculate on the architectural detail in an age of digital ubiquity.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_011.pdf
last changed	2012/05/15 20:46

_id	acadia12_277
id	acadia12_277
authors	Kelley, Thomas ; Blankenbaker, Sarah
year	2012
title	Smart Disassembly: Or, How I Learned to Take Things Apart"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 277-283
doi	https://doi.org/10.52842/conf.acadia.2012.277
summary	Taking things apart is easy. How something works, or even what it is, is irrelevant to its dismantling. If assembly can be perceived as a rational act, then disassembly is certainly its counterpart: an intuitive, foolproof, and mindless errand of the seemingly curious subject. It is in this unflattering description, however, that disassembly warrants an analysis of its smart potential Smart Disassemblies locates the exploded view drawing, a representation that conveys the instructions for assembly, within its architectural legacy, from its origins in the Renaissance to its more contemporary appropriation by Thom Mayne and Daniel Libeskind. The categorical rules, and the part-to-whole relationships they imply, gleaned from these precedents are then subverted toward the end of disassembling an object. The proposed rule sets (Point of Explosion, Point of View, and Explosion Sequence) and their variants are tested through their application to a complex assembly of objects, a jazz quintet.
keywords	part-to-whole , smart assembly , synthetic tectonics
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

_id	acadia12_97
id	acadia12_97
authors	Lilley, Brian ; Hudson, Roland ; Plucknett, Kevin ; Macdonald, Rory ; Cheng, Nancy Yen-Wen ; Nielsen, Stig Anton ; Nouska, Olympia ; Grinbergs, Monika ; Andematten, Stephen ; Baumgardner, Kyle ; Blackman, Clayton ; Kennedy, Matthew ; Chatinthu, Monthira ; Tianchen, Dai ; Sheng-Fu, Chen
year	2012
title	Ceramic Perspiration: Multi-Scalar Development of Ceramic Material
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 97-108
doi	https://doi.org/10.52842/conf.acadia.2012.097
summary	Ceramic building material is a useful passive modulator of the environment. The subject area is based on traditional cultural and material knowledge of clay properties: from amphora to rammed earth building; and ranges to present uses: from desiccants and space shuttle tile patterns to bio-ceramics. The primary consideration is to control material density and porosity in a tile component, in response to specific environmental conditions. This depends on a number of key physical principles: the ability of the material to absorb thermal energy, the ability to absorb and then ‘wick’ moisture within the pore structure, and the decrement factor or ‘time lag’ of the effect. The interplay between these properties point to the importance of directionality in the porous microstructure, at the boundary layer. Material characteristics have been investigated in the laboratory at a micron scale and in the ceramics workshop at full scale, with some interplay between the two. Recent work done on monitoring has led to the development of software tools that allow feedback (approaching real time)- a visual representation of the dynamic thermal and hygrometric properties involved.
keywords	Synthetic tectonics , composite materials , smart assemblies , emerging material processes , Responsive environments , sensing , real-time computation , feedback loops , Information Visualization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2017_105
id	ecaade2017_105
authors	Miodragovic Vella, Irina and Kotnik, Toni
year	2017
title	Stereotomy, an Early Example of a Material System
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 251-258
doi	https://doi.org/10.52842/conf.ecaade.2017.2.251
summary	Stereotomy originated as a technique that accumulated theoretical and practical knowledge on stone material properties and construction. At its peak in the nineteenth century, by pushing the structure and construction limits, it gained the ability of using "the weight of the stone against itself by making it hover in space through the very weight that should make it fall down" (Perrault 1964, cited Etelin, 2012). The modern architectural tectonics, based on structural comprehension in architecture, found no value in stereotomy beyond its early, Gothic period. Similarly, digital architectural theory recognized in Gothic the early examples of a material systems. This paper reassesses stereotomy at its fundamental levels, as a material system based on generative processes that assimilate structure and construction through parameterization. In this way, a theoretical framework is established that exposes stereotomy's intrinsic potentials: the continuity of historic and contemporary examples, overlaps between current research endeavours, and its genuine relevance for contemporary digital architecture.
keywords	stereotomy, material system, Abeille vault, parametric design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2012_274
id	ecaade2012_274
authors	Sharaidin, Kamil; Salim, Flora
year	2012
title	Design Considerations for Adopting Kinetic Facades in Building Practice
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 629-637
doi	https://doi.org/10.52842/conf.ecaade.2012.2.629
wos	WOS:000330320600068
summary	Interactive architecture plays an increasingly important role in today’s building practice. This includes design and implementation of kinetic facades. However, in the age of digital architecture, design and construction of kinetic facade has been under-explored and not well practically implemented. Hence, new design approach to integrate kinetic facade and architecture is needed for physical and content integration, instead of the traditional design approach. The ultimate objective of this study is to formulate a suitable design method to integrate kinesis with a building. Furthermore, this research aims to establish effective tectonics for kinetic facades through the exploration of different perspectives of practitioners involved directly with kinetic facades.
keywords	Kinetic facades; building practice; design consideration; early design stages; practitioner
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_439
id	acadia12_439
authors	As, Imdat ; Angelico, Maria
year	2012
title	Crowdsourcing Architecture: A Disruptive Model in Architectural Practice
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 439-443
doi	https://doi.org/10.52842/conf.acadia.2012.439
summary	This paper discusses the use of crowdsourcing as a new approach for architectural design acquisition. We will give an overview of the concept of crowdsourcing, and elaborate on its particular application in architecture via concrete projects executed on Arcbazar, a firstof- its-kind crowdsourcing platform for architectural design services. We argue that online crowdsourcing platforms can have an immense impact on smaller-scale design challenges, e.g., home remodeling projects and landscape and interior design challenges, and can potentially carry these often neglected projects into the architectural design sphere. In this paper we will discuss the methods and techniques of architectural crowdsourcing and illustrate the processes and outcomes through a series of projects: a remodeling project for a closet; an interior design challenge for a dining space; and a layout problem for an apartment complex. We will then evaluate the protocol and outcome of architectural crowdsourcing, and convey the professional and popular media response to this new method of architectural design acquisition.
keywords	crowdsourcing , competitions , networking , interaction , collaboration
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:54

_id	lasg_whitepapers_2019_367
id	lasg_whitepapers_2019_367
authors	Atelier Iris van Herpen
year	2019
title	Exploring New Forms of Craft
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.367 - 392
summary	Dutch fashion designer Iris van Herpen and Canadian architect Philip Beesley have been united by friendship and a mutual interest in esoteric, experimental craft since 2012. Together they collaborated on various dresses, techniques and materials, featured in six of Iris van Herpen's Couture collections. Since her first show in 2007, van Herpen has been preoccupied with inventing new forms and methods of sartorial expression by combining the most traditional and the most radical materials and garment construction methods into her unique aesthetic vision.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

_id	ascaad2012_012
id	ascaad2012_012
authors	Bhzad Sidawi
year	2012
title	The Possible Role of CAAD Systems in Initiating Innovation in the Design Studio
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 117-128
summary	Design is a social phenomenon and the previous research highlights that design precedents and social interaction between designers including negotiation, collaboration and communications is essential to initiate creativity and the production of innovative design products. CAAD systems aim is to help the architect in formulating and developing design ideas. Researchers suggest that knowledge based systems can be integrated with CAAD systems so it would provide the architect with design knowledge that would him/ her to recall design precedents/ solutions thus link it to the design problems. Nevertheless, CAAD systems can provide limited help regarding the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is focused on architects rather than the end product. On the other hand, most of the CAAD systems have web communication tools that enable designers to communicate their with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to produce innovative design products.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_012.pdf
last changed	2012/05/15 20:46

_id	ijac201210406
id	ijac201210406
authors	Biswas, Tajin; Ramesh Krishnamurti
year	2012
title	Data Sharing for Sustainable Building Assessment
source	International Journal of Architectural Computing vol. 10 - no. 4, 555-574
summary	Sustainable design assessment requires information, which is aggregated from different phases of a building design, and evaluated according to criteria specified in a ‘sustainable building rating system.’ In the architecture engineering and construction (AEC) domain much of the necessary information is available through open source data standards such as Industry Foundation Classes (IFC). However, no single standard that provides support for sustainability assessment completely suffices as a data structure. This paper explores the augmentation of the Construction Operations Building information exchange (COBie) model, as an intermediary data structure, to bridge between requirements of the Leadership in Energy and Environmental Design (LEED) rating system and a building information model. Development of a general framework for data sharing and information management for LEED assessments is illustrated through an implementation of a prototype using functional databases.The prototype checks and augments available data as needed, which is used to populate LEED submission templates.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
wos	WOS:000330322400077
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_143
id	ecaade2012_143
authors	Both, Petra von
year	2012
title	Potentials and Barriers for Implementing BIM in the German AEC Market: Results of a Current Market Analysis
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 151-158
doi	https://doi.org/10.52842/conf.ecaade.2012.2.151
wos	WOS:000330320600015
summary	The research project „BIM – Potentials and Barriers“ aims to analyse the existing practice concerning BIM and the barriers for the implementation of this approach in Germany. Accompanied by an ‚advisory board’ with nameable representatives from practice, the public authorities and AEC associations, a set of hypotheses has been elaborated that could be evaluated by a detailed survey. Based on the detection of relevant stakeholders, the survey fi rst tries to disclose the real situation of how BIM is currently used in practice. Furthermore the potentials of the application of BIM in the different processes and target groups are determined as well as the barriers and constraints. Thereby the enhancement of the considered thematic areas is an important solution approach of the project: besides technological aspects, the analysis is also focusing on contracting, norms and processes as well as education, knowledge and role perception.
keywords	BIM; survey; collaborative engineering; virtual engineering; product modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_266
id	ecaade2012_266
authors	Casucci, Tommaso ; Erioli, Alessio
year	2012
title	Behavioural Surfaces: Project for the Architecture Faculty library in Florence
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 339-345
doi	https://doi.org/10.52842/conf.ecaade.2012.1.339
wos	WOS:000330322400034
summary	Behavioural Surfaces is a thesis project in Architecture discussed on December 2010 at the University of Florence. The project explores the surfacespace relationship in which a surface condition, generated from intensive datascapes derived from environmental data, is able to produce spatial differentiation and modulate structural and environmental preformance. Exploiting material self-organization in sea sponges as surfaces that deploy function and performance through curvature modulation and space defi nition, two different surface definition processes were explored to organize the system hierarchy and its performances at two different scales. At the macroscale, the global shape of the building is shaped on the base of isopotential surfaces while at a more detailed level the multi-performance skin system is defi ned upon the triply periodic minimal surfaces (TPMS).
keywords	Digital datascape; Isosurfaces; Material intelligence; Minimal sufaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2012_34
id	sigradi2012_34
authors	de Menezes, Alexandre Monteiro; Viana, Maria de Lourdes Silva; Pereira Junior, Mário Lucio; Palhares, Sergio Ricardo
year	2012
title	O BIM e o ensino de projeto de edificações nos cursos de Arquitetura e Engenharia Civil em Minas Gerais [BIM and teaching building design in architecture and Civil Engineering courses in Minas Gerais]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 575-579
summary	This research investigates the use of BIM technology in education and practice of architectural design, structures and installations in buildings. From earlier research pointing the critical linear process of building design, the goal is to map out groups research, and university professors who research and apply this technology in order to know the state of the art in the field of professional practice and academic on the regional scene. The hypothesis is that with BIM, there are real advances in the world of construction civil, but also as opposed to the inadequacies contemporary process of teaching and designing projects.
keywords	BIM Technology; Design teaching; Architecture and Engineering
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	cf2015_037
id	cf2015_037
authors	de Vries, Bauke; Grond, Manon and van der Zee, Aant
year	2015
title	Development of a multi-disciplinary university wide design course
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 37-46.
summary	Design is one of the basic skills of every engineer. However until now design is only seen as a core course in Architecture studies and lately in Industrial Engineering studies. This paper reports about the development of a design course for all departments of a typical technical university. After a short overview of design teaching tradition, an inventory is presented of the different interpretation of design by the various departments. The course development is presented over two periods: 2012-2014, and 2014-2015. In between a major change was conducted. The course learning goals and student evaluations are presented. In the discussion we reflect on fundamental and practical problems that occur in design teaching for such a wide audience. Finally we draw conclusions on the changing role of design what is needed to give design the same status as mathematics in a technical curriculum.
keywords	Design, Design teaching, Multi-disciplinary design
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: