Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_391
id	acadia12_391
authors	Ajlouni, Rima
year	2012
title	The Forbidden Symmetries
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 391-400
doi	https://doi.org/10.52842/conf.acadia.2012.391
summary	The emergence of quasi-periodic tiling theories in mathematics and material science is revealing a new class of symmetry, which had never been accessible before. Because of their astounding visual and structural properties, quasi-periodic symmetries can be ideally suited for many applications in art and architecture; providing a rich source of ideas for articulating form, pattern, surface and structure. However, since their discovery, the unique long-range order of quasi-periodic symmetries, is still posing a perplexing puzzle. As rule-based systems, the ability to algorithmically generate these complicated symmetries can be instrumental in understanding and manipulating their geometry. Recently, the discovery of quasi-periodic patterns in ancient Islamic architecture is providing a unique example of how ancient mathematics can inform our understanding of some basic theories in modern science. The recent investigation into these complex and chaotic formations is providing evidence to show that ancient designers, by using the most primitive tools (a compass and a straightedge) were able to resolve the complicated long-range principles of ten-fold quasi-periodic formations. Derived from these ancient principles, this paper presents a computational model for describing the long-range order of octagon-based quasi-periodic formations. The objective of the study is to design an algorithm for constructing large patches of octagon-based quasi-crystalline formations. The proposed algorithm is proven to be successful in producing an infinite and defect-free covering of the two-dimensional plane.
keywords	computational model , quasi-crystalline , symmetries , algorithms , complex geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_212
id	ecaade2012_212
authors	Aghaei Meibodi, Mania ; Aghaiemeybodi, Hamia
year	2012
title	The Synergy Between Structure and Ornament: A Reflection on the Practice of Tectonic in the Digital and Physical Worlds
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2012.2.245
wos	WOS:000330320600024
summary	The use of digital design and fabrication technologies in architecture has followed a paradigm shift, which has seen the topology, form and structure of architecture pushed to incorporate areas such as climate, construction, acoustic etc. While these digital technologies are intended to enhance the processes and performance, a discussion of aesthetics has been ignored. Surmising that the use of digital technology enhances the performability and effi ciency aspects of architecture as well as the aesthetics, this research questions what the new relationships and arrangements for structure and ornament are. What are the challenges when structure uses a process-based logic and is sensitive to materiality whereas the aesthetics has a representation-based logic and is not sensitive to materiality? The authors of this paper contribute to this debate by using the notion of tectonic as a platform for gaining and creating knowledge about this issue and examining the issues through the design and prototyping of a Multi-functional Pavilion.
keywords	Processes; ornament; digital technology; tectonic; architectural expression
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_243
id	ecaade2012_243
authors	Araya, Sergio; Zolotovsky, Ekaterina; Gidekel, Manuel
year	2012
title	Living Architecture: Micro Performances of Bio Fabrication
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 447-457
doi	https://doi.org/10.52842/conf.ecaade.2012.2.447
wos	WOS:000330320600047
summary	This ongoing research study explores novel modes of design and fabrication by combining digital tools and technologies with living biological systems within controlled environments in order to induce specifi c biological functions and material production processes. The main objective is to design and implement a biological fabrication technique, using bacteria, to produce physical components for architecture and product design.
keywords	Synthetic Biology; Architecture; Design; Biofabrication; Biomaterial
series	eCAADe
email
last changed	2022/06/07 07:54

_id	lasg_whitepapers_2019_367
id	lasg_whitepapers_2019_367
authors	Atelier Iris van Herpen
year	2019
title	Exploring New Forms of Craft
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.367 - 392
summary	Dutch fashion designer Iris van Herpen and Canadian architect Philip Beesley have been united by friendship and a mutual interest in esoteric, experimental craft since 2012. Together they collaborated on various dresses, techniques and materials, featured in six of Iris van Herpen's Couture collections. Since her first show in 2007, van Herpen has been preoccupied with inventing new forms and methods of sartorial expression by combining the most traditional and the most radical materials and garment construction methods into her unique aesthetic vision.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	ecaade2012_250
id	ecaade2012_250
authors	Baerlecken, Daniel ; Swarts, Matthew ; Gentry, Russell ; Wonoto, Nixon
year	2012
title	Bio-Origami: Form Finding and Evaluation of Origami Structures
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2012.1.497
wos	WOS:000330322400051
summary	This paper presents a concept of origami as a form-generator for a structural system that allows deployability for structures with large spans. The presented approach studies the embedded kinetic possibilities of folded structures and focuses on a parametric modelling process that allows evaluating the structural performance of different types of the same origami family in order to optimize the geometry for a given scenario. The workfl ow between scripting based form generation – within Rhinoceros and Excel – and LS-DYNA is presented in detail. In addition to that the question of scalability from a thin microstructure to a thickened roof structure is discussed in the context of an architectural project.
keywords	Parametric modelling; form fi nding; origami; LS-DYNA; scripting
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_290
id	ecaade2012_290
authors	Barakat, Merate
year	2012
title	Urban Acoustic Simulation: Analysis of Urban Public Spaces through Auditory senses
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 587-592
doi	https://doi.org/10.52842/conf.ecaade.2012.1.587
wos	WOS:000330322400060
summary	This paper explores the sonic characteristics of urban spaces, with the application of apprehending acoustic space and form theory. The theory defines auditory spaces as acoustical arenas, which are spaces defi ned and delineated by sonic events. Historically, cities were built around a soundmark, for example, the resonance of a church bell or propagation of a calling for prayer, or a factory horn. Anyone living beyond the horizon of this soundmark was not considered citizens of that town. Furthermore, the volume of urban sonic arenas depends on natural. Digital simulation is necessary to visualize the ephemeral and temporal nature of sound, within a dynamic immersive environment like urban spaces. This paper digitally analyses the different morphologies of old cities and forms of growth in relation to the sound propagation and ecological effects. An experiment is conducted with the aid of an ancient North-African city model, exposed to a point cloud agent system. By analysing how the sound propagates from the known soundmark through the urban fabric, with the wind pressure interference; the paper compares the theoretical concept of soundmarks and the known perimeter of the ancient city
keywords	Urban Public Spaces; Aural Design; Auditory Arena Simulation; Soundmark
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_54
id	sigradi2012_54
authors	Barbosa, Wilson; Araújo, André Luís; Celani, Gabriela
year	2012
title	Modelagem paramétrica para o projeto e produção automatizados de uma peça de mobiliário: um exercício de aplicação [Parametric Design and Digital Fabrication of a Reception Desk: a design exercise]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 561-565
summary	This paper describes a design experiment of a reception desk. Automated procedures were used in the process: a parametric design generated the form and connections. Computer models and physical prototypes were produced in order to develop construction details and preview results. We compared this exercise with the method used to design Aviva Stadium in Dublin. It was possible to conclude that the use of a generative method along with automated procedures did not restrict creativity, allowing the quick exploration of multiple design alternatives.
keywords	parametric design, digital fabrication, CAD/CAM, file-to-factory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_163
id	ecaade2012_163
authors	Barbosa, Wilson; Araújo, André; Carvalho, Guilherme; Celani, Gabriela
year	2012
title	Samba Reception Desk: Compromising Aesthetics, Fabrication and Structural Performance in the Design Process
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 255-263
doi	https://doi.org/10.52842/conf.ecaade.2012.2.255
wos	WOS:000330320600025
summary	The present paper describes an integrative design experiment in which different types of models were used in order to achieve a design that compromises aesthetics, lightness, fabrication, assembly and structural performance. It shows how an integrative approach, through the use of both virtual and physical models, can provide valuable feedback in different phases of the design and fabrication process. It was possible to conclude that the design method used allowed solving many problems and had a significant impact in the resulting object.
keywords	Design process; structural analysis; parametric design; digital fabrication; integrative design; models in design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
doi	https://doi.org/10.52842/conf.acadia.2012.199
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_019
id	ascaad2012_019
authors	Blibli, Mustapha; Ammar Bouchair and Faouzi Hannouf
year	2012
title	Three Dimensional Reconstitution of an Old Town from Historical Documents: Case of the Medina of Jijel in Algeria
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 191; 285-303
summary	The three-dimensional reconstitution of cities and urban tissues was the subject of several studies and researches. In order to obtain the acquisition of the geometry of architectural or urban sets, some studies are based on Photogrammetric or on computer vision. Others have focused on the development of tools of acquisition from a laser providing a 3D scatter plot. Some of them yet focused towards the development of CAD software. The automatic generation for morphological 3D representation based on the exploitation of the architectural knowledge basis is also an option. This type of work becomes more relevant and legitimate when it concerns old cities in state of ruin or more simply missing whose remains only prints or literary descriptions similar to our case study; the old town of Jijel that many people ignore its existence. The aim of this work is to achieve a 3D reconstitution of buildings of this town based on historical documents, mostly prints, digitized old maps and plans, as well as literary texts (tales of travelers, military records, and history books). The method developed can solve and generate possible urban volumes in the most frequent cases. The 3D model obtained, despite its geometric simplicity, can view the city from different angles and open new opportunities for research in history, architecture and town planning.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_019.pdf
last changed	2012/05/15 20:46

_id	ijac201210303
id	ijac201210303
authors	Bohnenberger, Sascha; Chin Koi Khoo, Daniel Davis, et al.
year	2012
title	Sensing Material Systems - Novel Design Strategies
source	International Journal of Architectural Computing vol. 10 - no. 3, 361-375
summary	The development of new building materials has decisively influenced the progression of architecture through the link between built form and available material systems. The new generation of engineered materials are no exception. However, to fully utilise these materials in the design process, there is a need for designers to understand how these new materials perform. In this paper we propose a method for sensing and representing the response of materials to external stimuli, at the early design stage, to help the designer establish a material awareness. We present a novel approach for embedding capacitive sensors into material models in order to improve material performance of designs. The method was applied and tested during two workshops, both discussed in this paper. The outcome is a method for anticipating engineered material behaviour.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_020
id	ascaad2012_020
authors	Bouchahm, Yasmina; Fatiha Bourbia and Bouketta Samira
year	2012
title	Numerical Simulation of Effect of Urban Geometry Layouts on Wind and Natural Ventilation Under Mediterranean Climate
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 195-202
summary	The use of the method "simulation" of the microclimate for an urban site presents much of interest; because this can serve as us observation and analysis of the consequences of various scenarios relating to the existence and the importance of the constituent elements in urban space. Wind in outdoor urban space is among the most difficult parameters to identify and control field given its instability. Currently, in the field of the ventilation, there are some outdoor spaces simulation tools, used to assess the flow of the wind at different spatial scales. The aim of this research is to demonstrate the effect of the urban geometry of the layout on the wind movement and the outdoor natural ventilation. However, this study investigated the effect on outdoor thermal comfort of a building layouts in a planned residential area situated in the city of Jijel humid Mediterranean region of Algeria. In order to improve outside comfort in this open space, a 3D numerical simulation tool ENVI-met 3.1 beta 4 was used to simulate the urban thermal climate taking into account various scenarios. Thus, simulation’s results are discussed in this paper
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_020.pdf
last changed	2012/05/15 20:46

_id	ascaad2012_016
id	ascaad2012_016
authors	Bourbia, Fatiha ; Yasmina Bouchahm and Ouarda Mansouri
year	2012
title	The Influence of Albedo on the Urban Microclimatic Street Canyon
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 159-169
summary	In city, when temperatures run higher than those in suburban and rural areas, this generate a phenomenon called Urban Heat Island (UHI), this effect occurs, primarily because growing numbers of buildings have supplanted vegetation and trees. The main causes of the different microclimatic conditions in cities are linked among other parameters to urban geometry which influences incoming and outgoing radiations as well as surface material properties, such as color and texture. In hot climates the elevated surface temperatures of materials directly affect, not only the urban microclimate, but also thermal comfort conditions in urban open spaces. In order to evaluate the microclimate variation of urban street canyon compared to the variation of walls and ground surfaces materials, series of field simulation are used by software tool , Envi-met v3.0, in down town of Constantine, Algeria.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_016.pdf
last changed	2012/05/15 20:46

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
doi	https://doi.org/10.52842/conf.acadia.2012.127
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2012_127
id	ecaade2012_127
authors	Burry, Jane; Goscinski, Wojec; Aranda-Mena, Guillermo; Alhadidi, Suleiman; Pena de Leon, Alex; Williams, Mani
year	2012
title	Trade Off and Real Time Analysis Feedback for Designers: Sailing as a Research Vehicle for Developing Systems and Skills
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 543-550
doi	https://doi.org/10.52842/conf.ecaade.2012.2.543
wos	WOS:000330320600057
summary	This paper describes the investigation and outcomes of a workshop aiming to answer the dual questions of how best to link technologies and how best to harness expert knowledge to capture and integrate dynamic performance feedback in the design process. In order to focus on these intrinsic questions, the workshop moved outside the domain most familiar to most of the participants, the built environment, and introduced the participants to design and performance feedback for what, to most, was the new domain of sailing and sail design. It resulted in novel and valuable prototypical systems for analysis and feedback to inform immediate design iteration. It achieved this through problem decomposition and synthetic design activity engaging integrated models and prototypes with components from multiple players and sources of informed or expert knowledge or knowing.
keywords	Design feedback; nested systems; sailing; interaction design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_107
id	sigradi2012_107
authors	Carrión, Awilda Rodríguez
year	2012
title	Scalable Explorations
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 449-452
summary	Authoring environments should strive for effortless navigation, traversing the space-scale virtual space in order to comprehend relationships between distinct elements, provide landmark or reference objects to keep the user’s orientation and perceptual cues that will enhance direction and depth perception. This paper will explore how the dynamic nature of 3-D virtual environments can provide new generations with powerful tools to explore disparate spatial scales, expand the modeling information and give them the ability to manipulate conceptually critical information that is governed by various scale parameters.
keywords	BIM; virtual space; scale; urban space
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2012_121
id	caadria2012_121
authors	Chang, Teng-Wen; Heng Jiang, Sheng-Han Chen and Sambit Datta
year	2012
title	Dynamic skin: Interacting with space: An inter-media interface between people and space
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 89–98
doi	https://doi.org/10.52842/conf.caadria.2012.089
summary	Space in its physical form provides the major architectural experience for the people inside the space. How people interact with their surrounding space dynamically is a noteworthy research topic. Architectural skin (or “skin” in this project) is the physical interface between people and their surroundings. The skin in this sense represents an inter-media that receive/sense the interactive behaviours of people and react back into space. Further, the skin needs to be mediated and reacted dynamically according to the interaction behaviours. With the case studies, the knowledge of skin design has achieved and then applied to develop three prototypes. In order to achieve the feasibility of skin design for dynamic skins, the multiple channels of input sensors are desired. Thus, a system called dynamic skin is proposed and details of process are evaluated. In order to incorporate the diverse scenario appeared in the cases and prototypes, a distributed system approach such as multi-agent system design is appealing to us. We propose a distributed dynamic skin platform that cannot only provide sufficient interaction between people and space, but also extending such space to the cloud and network.
keywords	Dynamic skin; multi-agent; distributed; cloud
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2012_304
id	sigradi2012_304
authors	Chiarella, Mauro; Alvarado, Rodrigo Garcia
year	2012
title	Composiciones Plegadas. Propiedades espaciales y materiales (envolventes y componentes) [Folded Compositions. Spatial Properties and Materials (enclosures and components)]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 500-504
summary	The folded compositions in architecture enable creatively rethink the methods and instruments of ideation and manufacturing. Displace conventional architectural graphic (Descriptive Geometry and Perspective) of autonomy and historical determinism that has characterized (obsessive stylistic control of the design object and spatial structure inherited under the canons of classical geometry). The material expression of these settings provides an important link between: the formal conceptualization, the digital geometric operation, its manufacturing and responsive review, similar to the design process used. At the same time reveals limitations of scale, materiality and design limitations, which condition the models implemented.
keywords	Compositions Fold. Parametric Design. Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	caadria2012_087
id	caadria2012_087
authors	Cho, Ji Young
year	2012
title	Spatial ability, creativity, and studio performance in architectural design
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 131–140
doi	https://doi.org/10.52842/conf.caadria.2012.131
summary	Architectural design is a multifaceted discipline that requires many abilities, in particular creativity and spatial ability. In order to identify the relationships among spatial ability, creativity, and studio performance, an exploratory study was conducted at one Midwestern university in the USA. Twenty-one freshman architecture students participated in the study, which involved three tasks: (a) the Torrance Test of Creative Thinking that measures fluency and originality in creativity, (b) a group of general spatial ability tests, and (c) the computer-based Architectural Spatial Ability Test. Students’ scores on the tasks were compared with their studio performance grades using SPSS. Results show that studio performance correlated with the ASAT but did not correlate with the TTCT or a group of general spatial ability tests. These findings indicate that a student’s performing well does not necessarily mean that she or he can generate many different alternatives (fluency) or original ideas (originality) nor that the student possesses general spatial abilities. The findings show the complexity of architectural design components and reveal beginning design students’ architectural abilities.
keywords	Creativity; spatial ability; architectural spatial ability; studio performance; architectural design education
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: