Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_326
id	sigradi2012_326
authors	Barros Filho, Mauro Normando Macêdo
year	2012
title	Simulando a dinâmica da segregação urbana: dos autômatos celulares aos modelos baseados em agentes [Simulating urban segregation dynamics: from cellular automata to agent based models]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 453-457
summary	As a consequence of the emergence of models based on the notions of disequilibrium and uncertainty, cities have being seen as intrinsically complex nonlinear systems subject to sociospatial changes that occur, simutaneously, in many scales. The present paper analyzes three models to simulate urban segregation dynamics. Schelling’s model shows how can emerge unexpected highly segregated global patterns from local preferences to live close to each other. Epstein and Axtell’s model reveals its pedagogic role through the manipulation of specific parameters. Portugali’s model emphasizes the cognition and learning capabilities of agents to recognize patterns and change their behaviour accordingly.
keywords	Segregação Urbana; Modelos de Simulação; Autômatos Celulares; Modelos Baseados em Agentes
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_019
id	ascaad2014_019
authors	Sidawi, Bhzad
year	2014
title	The Role of Social Interaction in Empowering the Innovative Utilization of CAAD
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 253-262
summary	The production of Innovative projects is the ultimate goal of architects and the previous research highlighted that certain negotiation, collaboration and communications activities are essential to initiate creativity and produce innovative design products. CAAD systems help the architect in formulating and developing design ideas. Research studies have concentrated on the usability and shortages of these systems, the users' attitude, knowledge and their acceptance of these systems. However, few studies have investigated the relation between the social settings of a design studio and the utilization of CAAD systems. This research explores the link between the social settings and the utilization of CAAD in producing innovative design products. It argues that certain design studio's settings would affect the use of CAAD systems in an innovative way. In 2012, students at college of Architecture, University of Dammam were surveyed to find out how the design studio's settings would support/ hinder the utilization of CAAD systems. The survey results showed that innovative students, who undertake certain design and communication tasks, found that CAAD systems are more useful in producing innovative projects. The study makes recommendations on how to set healthy social interaction conditions in the design studio and initiate innovative behaviour while using CAAD systems during the design process.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2012_024
id	ascaad2012_024
authors	Abeer, Samy Yousef Mohamed
year	2012
title	Sustainable Design and Construction: New Approaches Towards Sustainable Manufacturing
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 241-251
summary	Ecological and environmental issues are playing an important and larger role in corporate and manufacturing strategies. For complete creative design process, buildings require both for construction and manufacturing, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. Thinking in terms of product life cycles is one of the challenges facing manufacturers today. “Life Cycle Management” (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, construction, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize the effectiveness during usage by means of Life Cycle Assessment, Product Data Management, Technical Support and last but not least by Life Cycle Costing. In this paper the environmental consciousness issues pertaining to design, construction, manufacturing and operations management are presented through computer intelligent technologies of this 21century. So, this paper shows the existing approaches of LCM and discusses their visions and further development.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_024.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2012_284
id	ecaade2012_284
authors	Ameijde, Jeroen van; Carlin, Brendon
year	2012
title	Digital Construction: Automated Design and Construction Experiments Using Customised On-Site Digital Devices
doi	https://doi.org/10.52842/conf.ecaade.2012.2.439
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 439-446
summary	This paper presents a currently on-going research trajectory, investigating integrated design and build work-fl ows using generative design strategies and custom built fabrication devices. The aim of the research, which is being developed through a series of experiments and workshops, is to explore scenarios in which these work-flows can produce emergent architectural structures which are highly adapted towards the intended performance within their specifi c context and site. The research has produced a number of installations and prototypical structures which test the practical and theoretical dimensions of the methodology explored. This paper will introduce intriguing new scenarios in which the architects’ role is focused on an indirect, advanced level of control of the process of design, allowing for a more open-ended method of negotiation between structure, users and environment.
wos	WOS:000330320600046
keywords	Generative design; digital fabrication; customised CNC devices; digital on-site construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_73
id	sigradi2012_73
authors	Amen, Fernando García; Álvarez, Marcelo Payssé; Bonifacio, Paulo Pereyra; Meirelles, Lucía
year	2012
title	Fabricando mundos. Realidad, simulacro e inmanencia [Manufacturing worlds. Reality, simulacra and immanence]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 645-648
summary	Digital manufacturing in both as art and technology is a new way of designing, re-creation and re-invention of reality. This paper considers, from an epistemological point of view, the process of digital fabrication and its hyperlinks to known and simulated reality, and its ontological nature. Through documentation and methodological approach to the construction of a Moebius strip, this paper analyzes the nature and specifications of digital manufacturing. For this purpose, it makes a study of some strip properties and establishes a correlation within digital manufacturing, emphasizing similarities, complexities and shared qualities. Thus, it aims to create a reflection and a critical perspective on the complex logic of creation and simulation of knowable reality. And also it contributes to explore a theoretical corpus on the role of architects and designers in this incipient and ongoing discipline.
keywords	Fabricación digital, Realidad, Simulacro, Inmanencia
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
wos	WOS:000330320600014
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia12_149
id	acadia12_149
authors	Besler, Erin
year	2012
title	Low Fidelity
doi	https://doi.org/10.52842/conf.acadia.2012.149
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 149-153
summary	Low Fidelity engages in the translational discrepancies that occur through mediums of architectural representation, not as instances of dilemma but as opportunities to subdue tautology and augment the seductive latency of representation(1). Where some might contend the discrepant as unlawful, the methodology that this thesis argues for engages the digital and machinic, and explores the translational discrepancies that challenge and interrupt our interface with matters of materialization and excite material propensities. The discrepant becomes a dynamic catalyst through the engagement of tools and techniques that subvert the homogeneity of digital design. Low Fidelity engages the sphere of translation by reevaluating the role of architectural representation as generator and generated its originations and its limitations. In an attempt to negotiate the digital and physical, this thesis situates itself within the feedback loop between the mediums of translation through ideas their formal logics, material propensities and back again.
keywords	Robotic Fabrication , Digital Machinic , Material Propensity , Technological Fidelity , Generative Representation , Translation through Mediums
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:52

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	ascaad2012_012
id	ascaad2012_012
authors	Bhzad Sidawi
year	2012
title	The Possible Role of CAAD Systems in Initiating Innovation in the Design Studio
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 117-128
summary	Design is a social phenomenon and the previous research highlights that design precedents and social interaction between designers including negotiation, collaboration and communications is essential to initiate creativity and the production of innovative design products. CAAD systems aim is to help the architect in formulating and developing design ideas. Researchers suggest that knowledge based systems can be integrated with CAAD systems so it would provide the architect with design knowledge that would him/ her to recall design precedents/ solutions thus link it to the design problems. Nevertheless, CAAD systems can provide limited help regarding the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is focused on architects rather than the end product. On the other hand, most of the CAAD systems have web communication tools that enable designers to communicate their with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to produce innovative design products.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_012.pdf
last changed	2012/05/15 20:46

_id	ijac201210303
id	ijac201210303
authors	Bohnenberger, Sascha; Chin Koi Khoo, Daniel Davis, et al.
year	2012
title	Sensing Material Systems - Novel Design Strategies
source	International Journal of Architectural Computing vol. 10 - no. 3, 361-375
summary	The development of new building materials has decisively influenced the progression of architecture through the link between built form and available material systems. The new generation of engineered materials are no exception. However, to fully utilise these materials in the design process, there is a need for designers to understand how these new materials perform. In this paper we propose a method for sensing and representing the response of materials to external stimuli, at the early design stage, to help the designer establish a material awareness. We present a novel approach for embedding capacitive sensors into material models in order to improve material performance of designs. The method was applied and tested during two workshops, both discussed in this paper. The outcome is a method for anticipating engineered material behaviour.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2012_143
id	ecaade2012_143
authors	Both, Petra von
year	2012
title	Potentials and Barriers for Implementing BIM in the German AEC Market: Results of a Current Market Analysis
doi	https://doi.org/10.52842/conf.ecaade.2012.2.151
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 151-158
summary	The research project „BIM – Potentials and Barriers“ aims to analyse the existing practice concerning BIM and the barriers for the implementation of this approach in Germany. Accompanied by an ‚advisory board’ with nameable representatives from practice, the public authorities and AEC associations, a set of hypotheses has been elaborated that could be evaluated by a detailed survey. Based on the detection of relevant stakeholders, the survey fi rst tries to disclose the real situation of how BIM is currently used in practice. Furthermore the potentials of the application of BIM in the different processes and target groups are determined as well as the barriers and constraints. Thereby the enhancement of the considered thematic areas is an important solution approach of the project: besides technological aspects, the analysis is also focusing on contracting, norms and processes as well as education, knowledge and role perception.
wos	WOS:000330320600015
keywords	BIM; survey; collaborative engineering; virtual engineering; product modelling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_267
id	ecaade2012_267
authors	Caldas, Luísa G. ; Santos, Luís
year	2012
title	Generation of Energy-Efficient Patio Houses with GENE_ARCH: Combining an Evolutionary Generative Design System with a Shape Grammar
doi	https://doi.org/10.52842/conf.ecaade.2012.1.459
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 459-470
summary	GENE_ARCH is a Generative Design System that combines Pareto Genetic Algorithms with an advanced building energy simulation engine. This work explores its integration with a Shape Grammar, acting as GENE_ARCH’s shape generation module. The urban patio house typology is readdressed in a contemporary context, both by improving its energy-effi ciency standards, and by rethinking its role in the genesis of high-density urban areas, while respecting its specifi c spatial organization and cultural grounding. Field work was carried out in Marrakesh, surveying a number of patio houses which became the Corpus of Design, from where a Shape Grammar was extracted. The computational implementation of the patio house grammar was done within GENE_ARCH. The resulting program was able to generate new, alternative patio houses designs that were more energy effi cient, while respecting the traditional rules captured from the analysis of existing houses. After the computational system was fully implemented, it was possible to complete different sets of experiments. The first experiments kept more restrained rules, thus generating new designs that closer resembled the existing ones. The progressive relaxation of rules and constraints allowed for a larger number of variations to emerge. Analysis of energy results provide insight into the main patterns resulting from the evolutionary search processes, namely in terms of form factors of generated solutions, and urban densities achieved.
wos	WOS:000330322400047
keywords	Generative Design Systems; Genetic Algorithms; Shape Grammars; Patio Houses; Energy Efficiency
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2012_85
id	sigradi2012_85
authors	Carpena, Nicolás; Cataldi, Mariano; Muñiz, Gonzalo
year	2012
title	En busca de nuevas metodologías y herramientas aplicables a la educación. Repensando nuestro rol docente en las aulas [In search of new methodologies and tools applicable to education. Rethinking our teaching role in the classroom]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 633-635
summary	The purpose of this work is to define and evaluate a method for the application of Gamification in education, particularly in the Multimedia Arts course, level 1. This allowed us to think about the value of play in the learning experience.
keywords	Docencia; Metodologías; Juego; Videojuegos, Gamificación
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2012_223
id	ecaade2012_223
authors	Chien, Sheng-Fen ; Yeh, Yee-Tai
year	2012
title	On Creativity and Parametric Design: A preliminary study of designer’s behaviour when employing parametric design tools
doi	https://doi.org/10.52842/conf.ecaade.2012.1.245
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 245-253
summary	This research explores the relationship between unexpected outcomes generated through parametric design tools and the design creative process. We conducted an empirical study to observe how designers behave while encountering unexpected outcomes using parametric design tools as well as other kinds of design tools. From our study, there are some indications that the space of possible design solutions of the participants was expanded with the existence of unexpected outcomes. The preliminary result is encouraging. Further studies may need to address experience designers and novice designers separately.
wos	WOS:000330322400024
keywords	Parametric design; unexpected outcome; creativity; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2012_333
id	sigradi2012_333
authors	da Silva, Isabelle Maria Mensato; Viz, Simone Helena Tanoue
year	2012
title	Ensino de Arquitetura e Urbanismo com auxilio de ferramentas digitais [Teaching Architecture and Urbanism with help of digital tools]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 522-526
summary	This article aims to discuss the importance of freehand drawings in the architectural projective process in the context of the digital age, through the use of tablets. It is intended to identify how these drawings, using tablets, keep the perception and the personal dash of each one. This research aims not only to review and update the drawing´s disciplines in the architecture courses - its practices and procedures - but also to discuss the actual role of representation - analogical or digital - and its interaction with others disciplines. The first research, done in 2011, indicated possibilities of interface with CAD, Revit and Sketch-up. The second part, in course in this year, 2012, is trying to experiment the use of tablets in three others disciplines: History of Architecture and Urbanism I, Landscaping and Project I, in the Instituto de Arquitetura e Urbanismo da USP, São Carlos, Brasil.
keywords	freehand drawing, graphic, tablet, digital media
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ijac201210204
id	ijac201210204
authors	Davis, Felecia
year	2012
title	Sensing Touch Curtain: Soft Architecture and Augmented Communication
source	International Journal of Architectural Computing vol. 10 - no. 2, 219-236
summary	The Sensing Touch Curtain prototype demonstrates one type of sensing that can be woven into soft building components. It is a computational textile that senses the nearness of a person or people and registers absolute touch on fabric through capacitive sensing. Capacitive sensing measures position and distance between the textile and a target object by sending forth electric signals.The methods of construction, method of electronic weaving and ways to consider models for somatosensory textiles are discussed in the paper. The Sensing Touch project frames an expanded role for soft architecture enclosures.
series	journal
last changed	2019/05/24 09:55

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: