Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_336
id	sigradi2012_336
authors	Pellitteri, Giuseppe; Riccobono, Alessia
year	2012
title	Towards which expressive horizons?
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 84-88
summary	Today’s explosive developments in digital technology have also affected architecture and urban landscape. The new possibilities opened up by digital simulation have led to an increasingly strategic approach to planning, an approach based on generating scenarios, which thus represents a radical departure from traditional planning. But, up to now, what is the prevalent trend in architecture? Can we talk yet in term of language? Or have the extreme freedom in design destroyed the style? In this paper we present an analysis of the contemporary architecture, strongly influenced by digital technologies, through an objective analysis of several case-studies and we show the first result of this in progress research.
keywords	Design Process; New Trends; Architectural Criticism; Digital Design
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2013_136
id	ecaade2013_136
authors	Vasku, Michael
year	2013
title	Generative Improvement of Street Networks Based on Space Syntax
doi	https://doi.org/10.52842/conf.ecaade.2013.1.367
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 367-374
summary	Space syntax is supposed to be an objective method for evaluating spatial configurations. Its contribution to a design process is dependent on the designer’s estimation. The paper describes a generative approach to finding particularly good interventions based on space syntax analyses of axial maps. More precisely, a case study was undertaken through applying such a strategy to improve and connect a segregated street network of an informal settlement to its neighbourhood. Controlling and redirecting movement in slums may cause positive effects. This research is based on and inspired by a consulting project by the company Space Syntax Limited for the Municipality of Jeddah, Saudi Arabia, in which the consulting company designed a regeneration program for declining informal settlements. (Karimi and Parham, 2012)
wos	WOS:000340635300038
keywords	Space syntax; slum upgrading; design computing; urban design.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	ecaade2012_267
id	ecaade2012_267
authors	Caldas, Luísa G. ; Santos, Luís
year	2012
title	Generation of Energy-Efficient Patio Houses with GENE_ARCH: Combining an Evolutionary Generative Design System with a Shape Grammar
doi	https://doi.org/10.52842/conf.ecaade.2012.1.459
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 459-470
summary	GENE_ARCH is a Generative Design System that combines Pareto Genetic Algorithms with an advanced building energy simulation engine. This work explores its integration with a Shape Grammar, acting as GENE_ARCH’s shape generation module. The urban patio house typology is readdressed in a contemporary context, both by improving its energy-effi ciency standards, and by rethinking its role in the genesis of high-density urban areas, while respecting its specifi c spatial organization and cultural grounding. Field work was carried out in Marrakesh, surveying a number of patio houses which became the Corpus of Design, from where a Shape Grammar was extracted. The computational implementation of the patio house grammar was done within GENE_ARCH. The resulting program was able to generate new, alternative patio houses designs that were more energy effi cient, while respecting the traditional rules captured from the analysis of existing houses. After the computational system was fully implemented, it was possible to complete different sets of experiments. The first experiments kept more restrained rules, thus generating new designs that closer resembled the existing ones. The progressive relaxation of rules and constraints allowed for a larger number of variations to emerge. Analysis of energy results provide insight into the main patterns resulting from the evolutionary search processes, namely in terms of form factors of generated solutions, and urban densities achieved.
wos	WOS:000330322400047
keywords	Generative Design Systems; Genetic Algorithms; Shape Grammars; Patio Houses; Energy Efficiency
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2012_135
id	ecaade2012_135
authors	Dorta, Tomás; Lesage, Annemarie; Bartolo, Carmelo Di
year	2012
title	Collaboration and Design Education Through the Interconnected HIS: Immature vs. Mature CI Loops Observed Through Ethnography by Telepresence
doi	https://doi.org/10.52842/conf.ecaade.2012.2.097
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 97-105
summary	This paper documents the very first use of the interconnected HIS in a pedagogical setting. For this Augmented Design Studio, where three interconnected HIS were set up, the aim was to foster collaboration and co-design between the project participants as a new approach to teach the virtual design studio and to study the collaborative ideation process. The HIS (Hybrid Ideation Space) is an immersive system that uses freehand sketches and models to exteriorize conceptual ideas. Two innovative research methods have been used to assess this studio: the Collaborative Conversation framework that analyses the design discourse and the Ethnography by Telepresence, a non-intrusive observation method through an unused HIS. The Augmented Design Studio has been observed to help the design students push their project from abstract concepts to formalised concepts because in a pedagogical setting, it fosters collaboration over traditional top-down teacher-student interactions.
wos	WOS:000330320600009
keywords	Design collaboration; Augmented Design Studio; Design Conversations; Ethnography by Telepresence; Hybrid Ideation Space
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia12_491
id	acadia12_491
authors	Feringa, Jelle ; Søndergaard, Asbjørn
year	2012
title	An Integral Approach to Structural Optimization and Fabrication
doi	https://doi.org/10.52842/conf.acadia.2012.491
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 491-497
summary	Abstract Integral structural optimization and fabrication seeks the synthesis of two original approaches; that of topological optimization (TO) and robotic hotwire cutting (HWC). TO allows for the reduction of up to 70% of the volume of concrete to support a given structure. A strength of the method is that it allows to come up with structural designs that lie beyond the grasp of traditional means of design. A design space is a discretized volume, delimiting where the optimization will take place. The number of cells used to discretize the design space thus sets the resolution of the TO. While the approach of the application of TO as a constitutive design tool centers on structural aspects in the design phase, the outcome of this process are structures that cannot be realized within a conventional budget. As such the ensuing design is optimal in a narrow sense; whilst optimal structurally though, construction can be prove to be prohibitively expensive. This paper reports ongoing research efforts on the development of a cost effective methodology for the realization of TO concrete structures using HWC.
keywords	Topology optimization , robotics , hotwire cutting , ruled surfaces , advanced concrete structures , formwork , EPS
series	ACADIA
type	panel paper
email
last changed	2022/06/07 07:50

_id	caadria2012_089
id	caadria2012_089
authors	Fernando, R.; R. Drogemuller and A. Burden
year	2012
title	Parametric and generative methods with building information modelling: Connecting BIM with explorative design modelling
doi	https://doi.org/10.52842/conf.caadria.2012.537
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 537–546
summary	Parametric and generative modelling methods are ways in which computer models are made more flexible, and of formalising domain-specific knowledge. At present, no open standard exists for the interchange of parametric and generative information. The Industry Foundation Classes (IFC) which are an open standard for interoperability in building information models is presented as the base for an open standard in parametric modelling. The advantage of allowing parametric and generative representations are that the early design process can allow for more iteration and changes can be implemented quicker than with traditional models. This paper begins with a formal definition of what constitutes to be parametric and generative modelling methods and then proceeds to describe an open standard in which the interchange of components could be implemented. As an illustrative example of generative design, Frazer’s ‘Reptiles’ project from 1968 is reinterpreted.
keywords	Building information model; parametric modelling; generative modelling
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia13_137
id	acadia13_137
authors	Kretzer, Manuel; In, Jessica; Letkemann, Joel; Jaskiewicz, Tomasz
year	2013
title	Resinance: A (Smart) Material Ecology
doi	https://doi.org/10.52842/conf.acadia.2013.137
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 137-146
summary	What if we had materials that weren’t solid and static like traditional building materials are? What if these materials could dynamically change and adapt to varying environmental situations and stimulations and evolve and learn over time? What if they were autonomous, self-sufficient and independent but could communicate with each other and exchange information? What would this “living matter” mean for architecture and the way we perceive the built environment? This paper looks briefly at current concepts and investigations in regards to programmable matter that occupy various areas of architectural research. It then goes into detail in describing the most recent smart material installation “Resinance” that was supervised by Manuel Kretzer and Benjamin Dillenburger and realized by the 2012/13 Master of Advanced Studies class as part of the materiability research at the Chair for CAAD, ETH Zürich in March 2013. The highly speculative sculpture links approaches in generative design, digital fabrication, physical/ubiquitous computing, distributed networks, swarm behavior and agent-based communication with bioinspiration and organic simulation in a responsive entity that reacts to user input and adapts its behavior over time.
keywords	Smart Materials; Distributed Networks; Digital Fabrication; Physical Computing; Responsive Environment
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	ijac201210306
id	ijac201210306
authors	Leach, Neil; Anders Carlson, Behrokh Khoshnevis, et al.
year	2012
title	Robotic Construction by Contour Crafting: The Case of Lunar Construction
source	International Journal of Architectural Computing vol. 10 - no. 3, 423-438
summary	Contour Crafting is a digitally controlled construction process invented by Professor Behrokh Khoshnevis that fabricates components directly from computer models, using layered fabrication technology. By obviating the need for formwork used in traditional concrete construction, CC can reduce costs and construction times significantly. The technique has great potential as a robotic form of construction reliant on relatively minimal human labor as a form of construction in relatively hazardous environments, such as the Moon with its radiation levels that can prove highly damaging. Current research funded by NASA has been exploring the potential for using CC on the Moon to build structures making use of readily available regolith that is found in great abundance on the surface of the Moon. This article offers an overview of this research and evaluates the merits of using CC on the Moon.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2012_001
id	ascaad2012_001
authors	Mahdjoubi, Lamine
year	2012
title	Digital Architecture at Crossroads – Transition from Simulation and Visualisation to Information Modelling
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 5
summary	Digital architecture is at an exciting but challenging stage of its development. Past decades have witnessed important developments in computer-generated architectural representations. These tools have complemented and, in some cases, superseded the traditional forms of design and communication. In parallel with progress in computer graphics, advances in computer generated architectural representations have evolved to deliver photorealistic computer generated imagery. However, there is evidence to suggest that these advances have not significantly enhanced collaborative practices. It was acknowledged that to address the fragmentation of the industry, a fundamental change to deliver digital architecture was needed. Dealing with the requirements for an improved co-ordination and co-operation between designers and other stakeholders to encourage more integration has therefore become a central issue in the last decade. It was also recognised that significantly more intelligence needs to be brought to bear on the decision-making process if the targets set by the sustainability agenda are to be met. The quest for an improved quality of information and decision making has shifted the emphasis from computer-generated imagery to integrated building information. The recent emergence of building information modelling (BIM) constitutes one of the most exciting developments in the field. It was suggested that BIM will deliver considerable sophistication and judgment in decision-making. This keynote speech seeks to examine the implications of the transition of digital architecture from simulation and visualisation to information modelling. It aims to shed light on the methodological and technological challenges facing practitioners, researchers, and software developers, as a result of the early adoption of BIM.
series	ASCAAD
type	keynote paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_001.pdf
last changed	2012/05/15 20:46

_id	caadria2012_058
id	caadria2012_058
authors	Matthews, Linda and Gavin Perin
year	2012
title	Materialising the pixel: A productive synergy
doi	https://doi.org/10.52842/conf.caadria.2012.475
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 475–484
summary	The composite photoreceptive field of the human eye receives photons emitted from a source and converts this energy into image information within the brain. The internal mechanisms of the contemporary camera imaging technologies represent yet another in a long history of attempts to technically replicate this procedure. The critical difference between the capacity of the human eye to receive quanta events or photons and that of a camera transmitting to a digital display device, rests in how much of the original signal can be recovered. This paper aims to show how the ‘information deficit’ associated with this technological conversion can be enhanced by the deliberate exploitation and re-arrangement of the camera’s image sensor mechanism. The paper will discuss how the mapping of pixel grid geometries and colour filter array patterns at the vastly increased scale of building façades, imparts a materiality to urban form that modifies the visibility and performance of the corresponding virtual screen image. The exploration of the material adaptation of pixel geometries leads to a new technique that extends the working gamut of pixel-based RGB colour space and both establishes an index to develop material performance criteria and modifies the limitations of traditional viewing technologies.
keywords	Pixels; sensor; CCTV; imaging; array; façades
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2014.761
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2023_483
id	sigradi2023_483
authors	Roco Ibaceta, Miguel
year	2023
title	Contemporary training processes to Architectural Design Studio’s Updating
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 997–1008
summary	This paper examines the existing training gaps between the traditional teaching process of the Architectural Design Studio (ADS) and the new contemporary training scenarios through the perception of the ePortfolio’s use, which allows it to visualize guidelines for updating its teaching and learning process. The study is qualitative with an applied approach, based on a perception survey answered by students who attended the P2 workshop, between 2012 – 2018, in the Architecture Career of Concepción University, Chile. The results show the existence of training gaps associated with factors of conception, planning and development of pedagogical strategies of the training process. The conclusions allow us to observe opportunities for updating the teaching process of the ADS through the mediation of technological tools, which help to build a new pedagogical conception, more adjusted to the current and future scenarios of modernity.
keywords	Higher Education, ePortfolio, ICT, pedagogical strategy, architectural training
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	ascaad2012_015
id	ascaad2012_015
authors	Saighi, Ouafa and Mohamed Salah Zerouala
year	2012
title	Information Technology Utilization in Architectural Engineering: A Field Investigation at the Department of Architecture and Construction, Constantine (Algeria)
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 155-156; 273-284
summary	This paper is derived from an under developed research work, that is a PhD thesis which studies the influence of Information Technology (IT) on architectural practice in Algeria. It examines the use of IT by students of the Department of Architecture and Construction in Constantine in their design studio’s projects. The target of the study is to inspect the depth of utilization of IT, identify the advantages and shortcomings of use, and propose some solutions. A field survey was undertaken on a sample of students at the Department of Architecture and Construction. The survey has the following objectives: • to find out the students’ motivation behind the adoption and use of IT in their projects; • to identify the negative and positive aspects of use; • to identify the barriers that would hinder better use; and • to determine the impact of the IT tools on the design process and projects. // For a more comprehensive comprehension of the study case; a pilot field survey was conducted during two consecutive years. This enables the researchers to make comparisons between the survey’s results of the same year, and to study the trends of use by making comparisons between the results of these two years. SPSS was used to analyze the results. The analysis of results shows that the IT helps largely to improve the quality of presentations of the documents, images and graphics but this was an attempt from students to satisfy and influence the "others". In some cases, this has negatively affected the quality of design projects. It was used by students with poor design skills to cover up some weak aspects and faults in their design projects. On the other hand, some tutors opposed the exaggerated use of IT and the complete dependence on the computer during the design stage. They prefer the "traditional way" of design development. There is an ongoing conflict and arguments between students and tutors regarding this matter. However, It was noticed that the IT has effectively contribute in improving the competition level between students thus the quality of their design projects.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_015.pdf
last changed	2012/05/15 20:46

_id	ecaade2012_274
id	ecaade2012_274
authors	Sharaidin, Kamil; Salim, Flora
year	2012
title	Design Considerations for Adopting Kinetic Facades in Building Practice
doi	https://doi.org/10.52842/conf.ecaade.2012.2.629
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 629-637
summary	Interactive architecture plays an increasingly important role in today’s building practice. This includes design and implementation of kinetic facades. However, in the age of digital architecture, design and construction of kinetic facade has been under-explored and not well practically implemented. Hence, new design approach to integrate kinetic facade and architecture is needed for physical and content integration, instead of the traditional design approach. The ultimate objective of this study is to formulate a suitable design method to integrate kinesis with a building. Furthermore, this research aims to establish effective tectonics for kinetic facades through the exploration of different perspectives of practitioners involved directly with kinetic facades.
wos	WOS:000330320600068
keywords	Kinetic facades; building practice; design consideration; early design stages; practitioner
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2012_133
id	caadria2012_133
authors	Baerlecken, Daniel and Gernot Riether
year	2012
title	Aggregates: Digital design for design
doi	https://doi.org/10.52842/conf.caadria.2012.607
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 607–616
summary	This paper discusses an educational design methodology for undergraduate studio instruction, which uses a systematic and research based design approach. Based on Lars Spuybroek’s methodology that was originally developed as a one-year graduate and postgraduate studio, a new method for undergraduate teaching has been developed. The paper will discuss Spuybroek’s methodology, as developed for the graduate and postgraduate program, and explain its adaption for undergraduate studio instruction. Spuybroek’s approach is based on a model that starts with research in systems in general that is them tuned to a certain set of architectural questions and developed into parametric buildings in a stepwise procedure by delaying the specifics of site and program.
keywords	Methodology of CAAD; education in CAAD; generative design; parametric modeling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
doi	https://doi.org/10.52842/conf.acadia.2012.511
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ascaad2012_020
id	ascaad2012_020
authors	Bouchahm, Yasmina; Fatiha Bourbia and Bouketta Samira
year	2012
title	Numerical Simulation of Effect of Urban Geometry Layouts on Wind and Natural Ventilation Under Mediterranean Climate
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 195-202
summary	The use of the method "simulation" of the microclimate for an urban site presents much of interest; because this can serve as us observation and analysis of the consequences of various scenarios relating to the existence and the importance of the constituent elements in urban space. Wind in outdoor urban space is among the most difficult parameters to identify and control field given its instability. Currently, in the field of the ventilation, there are some outdoor spaces simulation tools, used to assess the flow of the wind at different spatial scales. The aim of this research is to demonstrate the effect of the urban geometry of the layout on the wind movement and the outdoor natural ventilation. However, this study investigated the effect on outdoor thermal comfort of a building layouts in a planned residential area situated in the city of Jijel humid Mediterranean region of Algeria. In order to improve outside comfort in this open space, a 3D numerical simulation tool ENVI-met 3.1 beta 4 was used to simulate the urban thermal climate taking into account various scenarios. Thus, simulation’s results are discussed in this paper
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_020.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_333
id	sigradi2012_333
authors	da Silva, Isabelle Maria Mensato; Viz, Simone Helena Tanoue
year	2012
title	Ensino de Arquitetura e Urbanismo com auxilio de ferramentas digitais [Teaching Architecture and Urbanism with help of digital tools]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 522-526
summary	This article aims to discuss the importance of freehand drawings in the architectural projective process in the context of the digital age, through the use of tablets. It is intended to identify how these drawings, using tablets, keep the perception and the personal dash of each one. This research aims not only to review and update the drawing´s disciplines in the architecture courses - its practices and procedures - but also to discuss the actual role of representation - analogical or digital - and its interaction with others disciplines. The first research, done in 2011, indicated possibilities of interface with CAD, Revit and Sketch-up. The second part, in course in this year, 2012, is trying to experiment the use of tablets in three others disciplines: History of Architecture and Urbanism I, Landscaping and Project I, in the Instituto de Arquitetura e Urbanismo da USP, São Carlos, Brasil.
keywords	freehand drawing, graphic, tablet, digital media
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: