Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2012_274
id	sigradi2012_274
authors	Maing, Minjung
year	2012
title	Virtual Mock-up Simulation of Building Skins for Design to Fabrication Integration
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 467-470
summary	With the growing demand for mock-up integration into late design and pre-construction phases, there is an increasing gap between the virtual design model of the building and the construction model. The gap is reinforced by lack of strong iterative exchanges between design and fabrication and consequently the construction of the building skin systems. This paper will discuss the research being conducted using virtual mock-ups as an earlier insertion of fabrication parameters into design process and presents a solution to bridge this gap. Studies of model integration will be introduced using component-based 3D-CAD modeling to link front and end user scenarios.
keywords	virtual mock-up; fabrication; integration; building skin ; simulation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia12_511
id	acadia12_511
authors	Borowski, Darrick ; Poulimeni, Nikoletta ; Janssen, Jeroen
year	2012
title	Edible Infrastructures: Emergent Organizational Patterns for the Productive City
doi	https://doi.org/10.52842/conf.acadia.2012.511
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 511-526
summary	Edible Infrastructures is an investigation into a projective mode of urbanism which considers food as an integral part of a city's metabolic infrastructure. Working with algorithms as design tools, we explore the generative potential of such a system to create an urban ecology that: provides for its residents via local, multi-scalar, distributed food production, reconnects urbanites with their food sources, and de-couples food costs from fossil fuels by limiting transportation at all levels, from source to table. The research is conducted through the building up of a sequence of algorithms, beginning with the ‘Settlement Simulation’, which couples consumers to productive surface area within a cellular automata type computational model. Topological analysis informs generative operations, as each stage builds on the output of the last. In this way we explore the hierarchical components for a new Productive City, including: the structure and programming of the urban circulatory network, an emergent urban morphology based around productive urban blocks, and opportunities for new architectural typologies. The resulting prototypical Productive City questions the underlying mechanisms that shape modern urban space and demonstrates the architectural potential of mathematical modeling and simulation in addressing complex urban spatial and programmatic challenges.
keywords	Urban Agriculture , Urban Ecologies and Food Systems , Productive Cities , Urban Metabolism , Computational Modeling and Simulation , Algorithmic/ Procedural Design Methodologies , Emergent Organization , Self-Organizing Systems
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_305
id	acadia12_305
authors	Kock, Jeffrey ; Bradley, Benjamin ; Levelle, Evan
year	2012
title	The Digital-Physical Feedback Loop: A Case Study
doi	https://doi.org/10.52842/conf.acadia.2012.305
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 305-314
summary	Kukje Art Center, Seoul’s new gallery designed by SO-IL, features a totally bespoke chainmail mesh system (submission note: the authors are not affiliated with SO-IL). A single sheet of complex-curved, tensioned mesh, made up of interlocking 40mm diameter stainless steel rings, wraps the building. This paper discusses the stages of a feedback loop process employed by the authors to refine a digital model of the mesh. The mesh’s perimeter attachment system does not prescribe ring locations, allowing the mesh to form find for itself during installation. As a result, the digital model must capture the behavioral tendencies of the mesh as it negotiates the building’s geometry. Paramount in meeting this challenge was the use of physical mockups. At each stage of the feedback loop process, the working digital model was used to develop a physical mockup of increased scale and complexity, and this mockup was used to refine the digital model. Ultimately, the model output of a mesh relaxation algorithm was used as the basis for engineering simulations and predictions of the mesh vertical ringcount needed at specific locations around the building. Mesh vertical ringcount predictions are validated relative to a 1:1 mockup and the installed Kukje Art Center mesh.
keywords	minimal surface , chainmail mesh , form finding , dynamic relaxation , finite element analysis , feedback loop , tensioned fabric , physical mockup , bespoke cladding , Kukje , Seoul
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	acadia12_343
id	acadia12_343
authors	Leidi, Michele ; Schlüter, Arno
year	2012
title	Formal and Functional Implications of Dynamics-Related Solar Design Schemes
doi	https://doi.org/10.52842/conf.acadia.2012.343
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 343-354
summary	In recent years several solar radiation simulation tools have been developed to assist architects in analyzing the performance of existing building designs. However it is often unclear how the results of these analyses can help to generate new solutions and thus be truly beneficial for innovation in sustainable architectural design. Recent developments in open source applications that allow links between energy simulation engines and 3D modeling environments open a new layer of understanding. The possibility to better understand the dynamic interaction between incident solar radiation and building envelopes allows the synthesis of new architectural design-schemes. This paper presents the results of a series of experiments based on the case-study of a mid-latitude single-family house in Taiki-Cho, Japan. The first experiment describes how the incident solar energy interacts with the exposed components of the envelope. The second experiment describes how the energy demand of the building can be partially reduced through the design of passive interventions that are based on the dynamics of the demand. Finally, the third experiment exemplifies how, based on the knowledge extracted from the first two experiments, it is possible to synthesize new dynamics-related solar design-schemes that join passive techniques, active technologies, and formal aspects.
keywords	Form , Function , Dynamics , Solar , Design-Scheme , Mid-latitude
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	acadia12_287
id	acadia12_287
authors	McGee, Wes ; Newell, Catie ; Willette, Aaron
year	2012
title	Glass Cast: A Reconfigurable Tooling System for Free-Form Glass Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2012.287
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 287-294
summary	Despite glass’s ubiquity in the modern built environment it is rarely applied in applications requiring complex curvature. The high temperatures and complexity of techniques utilized in forming curved glass panels are typically very expensive to employ, requiring dedicated hard-tooling which ultimately limits the formal variation that can be achieved. This combination of economic and manufacturing barriers limits both the formal possibilities and potentially the overall envelope-performance characteristics of the glazing system. This research investigates a methodology for utilizing reconfigurable tooling to form glass into doubly curved geometries, offering the potential for improved structural and environmental performance in a material that has remained largely unchanged since the advent of its industrial manufacturing. A custom built forming kiln has been developed and tested, integrated through a parametric modeling workflow to provide manufacturing constraint feedback directly into the design process. The research also investigates the post-form trimming of glass utilizing robotic abrasive waterjet cutting, allowing for the output of machine control data directly from the digital model. The potentials of the methodologies developed in this process are shown through the fabrication of a full-scale installation. By integrating material, fabrication, and design constraints into a streamlined computational methodology, the process also serves as a model for a more intuitive production workflow, expanding the understanding of glass as a material with wide-ranging possibilities for a more performative architecture.
keywords	Digital Fabrication , Robotic Fabrication , Computational Design , Material Computation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	caadria2012_125
id	caadria2012_125
authors	Hanafin, S.; S. Datta, B. Rolfe, M. Hobbs
year	2012
title	Envelope tesselation with stochastic rotation of 4-fold penttiles
doi	https://doi.org/10.52842/conf.caadria.2012.253
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 253–262
summary	The challenge of developing adaptive, responsive low-energy architecture requires new knowledge about the complex and dynamic interaction between envelope architecture and optimisation between competing environmental performance metrics. Advances in modelling the geometry of building envelopes and control technologies for adaptive buildings now permit the sophisticated evaluation of alternative envelope configurations for a set of performance criteria. This paper reports on a study of the parametric control of a building envelope based on moveable façade components, acting as a shading device to reduce thermal gain within the building. This is investigated using a novel pentagonal tiling strategy considering the component design, tessellation and control methods.
keywords	Responsive envelopes; moveable façade components; parametric modelling; tiling geometry; stochastic rotation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia12_87
id	acadia12_87
authors	Menicovich, David ; Gallardo, Daniele ; Bevilaqua, Riccardo ; Vollen, Jason
year	2012
title	Generation and Integration of an Aerodynamic Performance Data Base Within the Concept Design Phase of Tall Buildings
doi	https://doi.org/10.52842/conf.acadia.2012.087
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 87-96
summary	Despite the fact that tall buildings are the most wind affected architectural typology, testing for aerodynamic performance is conducted during the later design phases well after the overall geometry has been developed. In this context, aerodynamic performance studies are limited to evaluating an existing design rather than a systematic performance study of design options driving form generation. Beyond constrains of time and cost of wind tunnel testing, which is still more reliable than Computational Fluid Dynamics (CFD) simulations for wind conditions around buildings, aerodynamic performance criteria lack an immediate interface with parametric design tools. This study details a framework for empirical data collection through wind tunnel testing of building mechatronic models and the expansion of the collected dataset by determining a mathematical interpolating model using an Artificial Neural Network (ANN) algorithm developing an Aerodynamic Performance Data Base (APDB). Frederick Keisler called the interacting of forces CO-REALITY, which he defined as The Science of Relationships. In the same article Keisler proclaims that the Form Follows Function is an outmoded understanding that design must demonstrate continuous variability in response to interactions of competing forces. This topographic space is both constant and fleeting where form is developed through the broadcasting of conflict and divergence as a system seeks balance and where one state of matter is passing by another; a decidedly fluid system. However, in spite of the fact that most of our environment consists of fluids or fluid reactions, instantaneous and geologic, natural and engineered, we have restricted ourselves to approaching the design of buildings and their interactions with the environment through solids, their properties and geometry; flow is considered well after the concept design stage and as validation of form. The research described herein explores alternative relations between the object and the flows around it as an iterative process, moving away from the traditional approach of Form Follows Function to Form Follows Flow.
keywords	Tall Buildings , Mechatronics , Artificial Neural Network , Aerodynamic Performance Data Base
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	sigradi2020_455
id	sigradi2020_455
authors	Bastian, Andrea Verri; Filho, Jarede Joaquim de Souza; Garcia, Júlia Assis de Souza Sampaio
year	2020
title	Urban modelling for evaluating photovoltaic potential through solar radiation incidence
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 455-463
summary	This study aims to better ascertain the influence that urbanistic parameters exert on the production of solar photovoltaic energy regarding different contexts in the city. Modifications implemented between the years of 2012 and 2016, especially on variables such as Maximum Lot Coverage, Floor Area Ratio, and Setbacks, have been evaluated through virtual models that cover areas in three different city districts. Amongst other implications, an increase in the area occupied by the buildings, as well as a decrease in the distance between them, occurred, causing more mutual shading and the loss of the photovoltaic potential associated with the building envelope.
keywords	Urbanistic parameters, Photovoltaic solar energy, Virtual models, Architecture, Urbanism
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	sigradi2012_372
id	sigradi2012_372
authors	Carvalho, Guilherme; Araújo, André Luís; Barbosa, Wilson; Noritomi, Pedro; Oliveira, Marcelo; Celani, Gabriela
year	2012
title	Avaliação Comparativa de Aplicativos de Análise Estrutural Vinculados ao Ambiente de Modelagem Paramétrica: estudo de caso utilizando o plug-in Scan-and-Solve para Rhinoceros [Comparative between software for structural analysis linked to parametric modeling environment: case study with the plug-in Scan-and-Solve for Rhinoceros]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 348-351
summary	This paper evaluates the use of Scan-and-Solve plug-in for structural analysis in Rhinoceros’s environment. A reception desk parametrically modeled was evaluated with Scan-and-Solve and with Ansys. From the results, we concluded that the main difference between the programs is that Ansys allows more detailed definition of the connections between parts of the object. Besides the virtual models, the results were showed with a physical model printed with the rapid prototypes techniques. The paper describes the integration of parametric modeling, structural analysis and rapid prototyping procedures in the design process.
keywords	Finite elements, Structural analysis, Scan-and-Solve; Ansys; Rapid prototyping
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ecaade2012_043
id	ecaade2012_043
authors	Chase, Scott ; Scopes, Lesley
year	2012
title	Cybergogy as a framework for teaching design students in virtual worlds
doi	https://doi.org/10.52842/conf.ecaade.2012.1.125
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 125-133
summary	In recent years, 3D virtual worlds have been explored for design teaching, yet it is unclear whether a specifi c pedagogy is used or adapted for such activities. Here we describe the pedagogical model of Cybergogy of Learning Archetypes and Learning Domains, developed specifically for teaching in 3D immersive virtual worlds, and its application to introductory building classes in the virtual world Second Life for architectural design students and teachers as part of the ARCHI21 project.
wos	WOS:000330322400012
keywords	Architectural education; Cybergogy; language learning; virtual worlds; Second Life
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2012_17
id	sigradi2012_17
authors	Dezen-Kempter, Eloisa; Arriva, Fernanda; Ramos, Guilherme Magri
year	2012
title	O uso de BIM para a criação de um banco de dados da produção de habitação de interesse social em Limeira-SP [BIM applied for the creation of a database on the social housing production in Limeira-SP]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 431-435
summary	This paper reports on the initial findings of an Undergraduate Research on Social Housing Program implemented in the city of Limeira, making use of a Building Information Modeling platform as a methodological procedure. The research was designed to enable students to better understand BIM in a hands-on, collaborative environment. A virtual information model of Housing Units and Housing Complex was created, and represents their real physical building components. The initial results portray BIM as especially useful to Civil Construction students, as fostering an integral environment where students are readily enabled to synthesize the knowledge of the art of construction.
keywords	Building Information Modeling; social housing; digital technology; education
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2012_135
id	ecaade2012_135
authors	Dorta, Tomás; Lesage, Annemarie; Bartolo, Carmelo Di
year	2012
title	Collaboration and Design Education Through the Interconnected HIS: Immature vs. Mature CI Loops Observed Through Ethnography by Telepresence
doi	https://doi.org/10.52842/conf.ecaade.2012.2.097
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 97-105
summary	This paper documents the very first use of the interconnected HIS in a pedagogical setting. For this Augmented Design Studio, where three interconnected HIS were set up, the aim was to foster collaboration and co-design between the project participants as a new approach to teach the virtual design studio and to study the collaborative ideation process. The HIS (Hybrid Ideation Space) is an immersive system that uses freehand sketches and models to exteriorize conceptual ideas. Two innovative research methods have been used to assess this studio: the Collaborative Conversation framework that analyses the design discourse and the Ethnography by Telepresence, a non-intrusive observation method through an unused HIS. The Augmented Design Studio has been observed to help the design students push their project from abstract concepts to formalised concepts because in a pedagogical setting, it fosters collaboration over traditional top-down teacher-student interactions.
wos	WOS:000330320600009
keywords	Design collaboration; Augmented Design Studio; Design Conversations; Ethnography by Telepresence; Hybrid Ideation Space
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2012_022
id	ecaade2012_022
authors	Ham, Jeremy J. ; Schnabel, Marc Aurel ; Datta, Sambit
year	2012
title	Developing Online Construction Technology Resources in Tectonic Design Education
doi	https://doi.org/10.52842/conf.ecaade.2012.1.135
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 135-142
summary	We outline issues of importance in relation to tectonic design within the architectural profession and the relationship to architectural education in Australia. Twelve years of research and curriculum development at Deakin University is discussed, involving the creation of online resources and case studies, digitally-integrated projects relating to building construction and design studio education. The ethos behind the Construction Primer of engaging students as ‘amateur researchers’ in a way that ensures ‘that student research work is worth more than course assessment’ forms the pedagogical foundation of much of this work. A model of Socially Networked Construction Technology education has been developed that integrates social networks and the Internet to engage students in tectonic design within and outside the classroom through authentic curricula. Through the use of Virtual Galleries, Blogs, YouTube and social networks, a culture of peer learning and sharing has ben developed. Through shared knowledge facilitated through social networks, great potential lies for expanding the synergies between higher order learning and online resource development for design decision support.
wos	WOS:000330322400013
keywords	Construction technology; social network; online learning; design decision support
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2012_094
id	caadria2012_094
authors	Roupé, Mattias; Mikael Johansson, Mikael Viklund Tallgren and Mathias Gustaffson
year	2012
title	Using the human body as an interactive interface for navigation in VR models
doi	https://doi.org/10.52842/conf.caadria.2012.079
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 79–88
summary	The use of Virtual Reality (VR) and interactive real-time rendering in urban planning and building design are becoming more and more common. However, the integration of VR in the urban planning process suffers from the complicated interaction handling of the virtual environment. In particular, people unfamiliar to gaming environments and computers are less prone to interact with a VR visualisation using keyboard and mouse as controlling devices. This paper addresses this issue by presenting an implementation of the XBOX 360 Kinect sensor system, which uses the human body to interact with the virtual environment. This type of interaction interface enables a more natural and user-friendly way of interacting with the virtual environment. The validation of the system shows that respondents perceived the interface as non-demanding and easy to use. The implemented interface to switch between different architecture proposals gave a better understanding and spatial reasoning for the respondent. The study also shows that males perceived the system as more demanding than females. The users also associated and compared their body with virtual environment, which could indicate that they used their body during spatial reasoning. This type of spatial reasoning has been agued to enhance the spatial-perception.
keywords	Virtual reality; XBOX Kinect; perception; navigation
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia12_409
id	acadia12_409
authors	Schubert, Gerhard ; Artinger, Eva ; Yanev, Violin ; Klinker, Gudrun ; Petzold, Frank
year	2012
title	3d Virtuality Sketching: Interactive 3d Sketching Based on Real Models in a Virtual Scene
doi	https://doi.org/10.52842/conf.acadia.2012.409
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 409-418
summary	Sketches and working models are without doubt one of the most widely used tools in the architect’s repertoire. In the early phases of the design process in particular, they represent an essential part of the exploration process. For the most part, however, sketching and model building are separate and sequential steps. This paper examines how both media can be linked to each other more effectively so that the design process is more continuous and the transition between the two media more fluid. Using a multi-touch table with additional 3D real-time object recognition, a prototypical system was developed and realised as part of a research project in which an interactive 3D sketching tool was linked with a real 3D working model.
keywords	design support , design tool , early design stages , HCI , urban design , interaction , collaboration
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	47a2
id	47a2
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	Editorial: Special issue on CAAD and innovation
source	ITCON journal
summary	The concepts and applications of Computer Aided Architectural Design (CAAD) have a predominant presence and impact on architectural design innovation and creativity. ASCAAD, in its 6th international conference, invited the learnt society of academics, researchers and professionals to debate the ubiquitous emerging role of CAAD in underpinning innovative design thinking processes and research in design education. The conference theme covered the following issues:  Computational research in design pedagogy and in practice  Intelligent agents, generative and parametric design  Building Information Modeling and Computer-supported design collaboration  Ubiquitous computing and interactive environments  Urban/ City/ regional planning and digital Modeling  Digital tools in design and construction  Mass customization Selected papers have been updated in this publication to reflect the constant quest to balance architectural thinking with operative techniques. It is well acknowledged that the advent of computation and information technology had profoundly altered architectural thinking. Design software and numerical fabrication have recast the role of form giving and shaping environments in architecture and opened up unprecedented opportunities of investigation and links with other scientific domains such as biomimcry, parametric design and modeling of urban and building environments. In this issue authors suggest a continuum between architectural analytical thinking and CAAD systems. Looking at the collaboration between authors of various backgrounds also strengthens this narrative that architecture is expanding beyond its traditional enquiry into historical and theoretical aspects into the world of multi-desciplinarity. It is evident from the diverse publications that CAAD is designed and utilized to expand the architectural pedagogy and practice into initiating and opening up the exploratory grounds of creation and productivity in design.
series	journal paper
type	short paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_14
last changed	2012/09/19 13:43

_id	ascaad2012_025
id	ascaad2012_025
authors	Hamani, Dalil and Jean Michel Olive
year	2012
title	Information System to Improve the Building Production Management Cooperative Work in Design and Architectural Production
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 253-270
summary	Our work is to enable partners of a construction project (building owner, architect, engineer, etc.) to share all the technical data produced and manipulated during the building process, by setting up interfaces for an accessible information system via the internet. Our system would be able to deliver an answer to a user to a particular question asked. The system links databases and allows building partners to access and to manipulate specific information. This paper covers the information structure model based on building construction knowledge and the access to user-relevant information. First, the paper aims to establish the state of the art of the information systems available today in the building construction field. Second, we present the contribution of our research to the description of the building elements (foundations, ramps, stairs, etc.), where information is share by partners who are distant from one another and focused on fields of expertise that are distinct but concurrent. Our system links distributed databases and provides an updated building representation that is being enriched and refined all along the building life cycle. It consists of 3D representations of the building as well as data that are associated with each graphical entity (walls, slabs, beams, etc.).
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_025.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_153
id	sigradi2012_153
authors	Kaufmann, Stefan; Petzold, Frank
year	2012
title	Cybernetic models in building fabrication. A three stage training approach to digital fabrication in architecture
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 243-245
summary	In the time since European architects first began using computers in the building design process, the digital revolution has transformed how architects use planning tools completely. Today, digital tools are an indispensable part of planning practice. Besides a wide variety of digital modeling tools, parametric tools offer architects diverse options for generating cybernetic building models as BIM-models or homeostatic parametric geometry models. Cybernetic models help us to describe the buildings as a system and can improve planning efficiency. The aim of planning is to construct or fabricate an end result. The integration of digital fabrication methods in the digital chain is a fundamental goal if architects are to benefit from the progressive development of computer controlled machine tools. Fabrication integrated digital models can automate the planning process up to the production stage and enable the efficient fabrication of building components. The increased efficiency of planning and fabrication has facilitated a growing proliferation of buildings of increasing geometric complexity. Computers can open a door to the realization of new forms, spaces and construction systems to architects that understand the principles of fabrication-integrated cybernetic modeling.
keywords	didactic; parametric design; digital fabrication; CIM;
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
doi	https://doi.org/10.52842/conf.caadria.2012.337
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2012_105
id	caadria2012_105
authors	Symeonidou, Ioanna and Utssav Gupta
year	2012
title	Bending curvature: A design tool for interactive complexity
doi	https://doi.org/10.52842/conf.caadria.2012.547
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 547–556
summary	Bending is a phenomenon that occurs with great frequency due to the presence of natural forces like gravity, wind. It occurs whenever an element is subjected to an external load applied perpendicularly to its longitudinal axis. Every known element, independently of its stiffness, exhibits certain amount of bending. This paper explores this phenomenon not as a failure mode to provide tolerance for, but as a tool to design with. The design research presented here emerged from a combination of digital explorations calibrated through analogue experiments of bending rods. The aim was to create a model that would incorporate the interaction between bending rods and the transfer of forces. Rods were connected to each other with rings that allowed for certain degree of freedom, though limiting them to be in contact with each other at all time. The rods started bending in various planes; their curvature is negotiated with that of their neighbours and thus a process of self-organisation with multiple parameters was present until equilibrium was attained. Intrigued by this observation, this research seeks to look at bending as a possible design tool. Understanding the behaviour of a single element in its simplex situation and simulating this behaviour in a computational environment has been the starting point for building up a model where complexity is built progressively as a result of local interactions among several bending rods.
keywords	Bending; geometry; simulation; parametric design; optimisation
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: