Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_57
id	acadia12_57
authors	Shireen, Naghmi ; Erhan, Halil ; Botta, David ; Woodbury, Robert
year	2012
title	Parallel Development of Parametric Design Models Using Subjunctive Dependency Graphs
doi	https://doi.org/10.52842/conf.acadia.2012.057
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 57-66
summary	Exploring problems through multiple alternatives is a key aspect of design. In this paper, we present a prototype system as an extension to existing parametric CAD tools that enables parallel generation and editing of design alternatives. The system is built on two fundamental ideas. First, use of subjunctive dependency graphs enables simultaneous work on multiple design variations. These graphs capture and reveal complex data flow across alternative parametric CAD models. Second, prototype-based modeling provides a weak notion of inheritance enabling incremental description of differences between alternatives. The system is intended to be general enough to be used in different CAD platforms and other systems using graph-based modeling. The three basic system functions are definition of alternatives (variations) using prototype-based modeling, structural and parametric divergences of the prototypes, and interactive comparison. The goal of this research is consistent with the general qualities expected from any creativity support tools: enabling exploration and simultaneous development of variations.
keywords	Parallel editing , Design exploration , Alternatives , Parametric CAD systems , Graph-based modelling
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2012_54
id	sigradi2012_54
authors	Barbosa, Wilson; Araújo, André Luís; Celani, Gabriela
year	2012
title	Modelagem paramétrica para o projeto e produção automatizados de uma peça de mobiliário: um exercício de aplicação [Parametric Design and Digital Fabrication of a Reception Desk: a design exercise]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 561-565
summary	This paper describes a design experiment of a reception desk. Automated procedures were used in the process: a parametric design generated the form and connections. Computer models and physical prototypes were produced in order to develop construction details and preview results. We compared this exercise with the method used to design Aviva Stadium in Dublin. It was possible to conclude that the use of a generative method along with automated procedures did not restrict creativity, allowing the quick exploration of multiple design alternatives.
keywords	parametric design, digital fabrication, CAD/CAM, file-to-factory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_057
id	ecaade2012_057
authors	Bielik, Martin ; Schneider, Sven ; König, Reinhard
year	2012
title	Parametric Urban Patterns: Exploring and integrating graph-based spatial properties in parametric urban modelling
doi	https://doi.org/10.52842/conf.ecaade.2012.1.701
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 701-708.
summary	The article presents a graph-based spatial analysis toolset (“decoding spaces”components) which we have recently developed as an extension of the visual scripting language Grasshopper3D for Rhino. These tools directly integrate spatial analysis methods into CAD design software which can have a signifi cant effect on current design workfl ows. However,grasshopper doesn’t only enable the results of analyses to be used in the standard Rhino modelling environment. It also makes it possible to integrate spatial analysis into a parametric design approach as discussed in this paper. The functionality of this toolset is demonstrated using a simple urban design scenario where we introduce the idea of parametric patterns based on graph-measures.
wos	WOS:000330322400074
keywords	Spatial analysis; parametric modelling; urban layout; design process; decoding spaces
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_296
id	ecaade2012_296
authors	Erhan, Halil I. ; Sanchez, Rodolfo ; Woodbury, Robert F. ; Mueller, Volker
year	2012
title	Visual Narratives of Parametric Design History: Aha! Now I see how you did it!
doi	https://doi.org/10.52842/conf.ecaade.2012.1.259
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 259-268
summary	Histories are underdeveloped and underused features in parametric CAD (PCAD) systems. Designers employ backtracking and deferral strategies that both use and augment history. Using backtracking and deferral as a framework we present two classes of design process graph diagramming techniques for augmented history in PCAD. We compare the second version of these design process graphs across several designers who completed multiple tasks using two parametric systems (SolidWorks and GenerativeComponents). The two systems show similar types of action, with markedly more and deeper backtracking in GenerativeComponents. We present a third diagramming system as a design for a proof of concept prototype. This prototype aims to expand the capabilities of design histories beyond access to single prior states to visualize and enable direct interaction based on backtracking and deferral.
wos	WOS:000330322400026
keywords	Parametric CAD, design history, backtracking, deferral, design space
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2012_352
id	sigradi2012_352
authors	Paiva, Ricardo Alexandre; Leite, Raquel Magalhães; Costa Lima, Mariana Quezado
year	2012
title	CAD e BIM: Transições e reflexos no ateliê de projeto [CAD and BIM: Transitions and reflections on the architectural design studio]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 229-232
summary	The purpose of this paper is to analyse, through a case study, the teaching-learning practices in the design studio, establishing a parallel between the use of CAD (Computer-Aided Design) and BIM (Buiding Information Modelling) tools. It aims to comprehend how this transition unfolds and to identify their reflections on the graphical representation of architectural projects, based on the results of students’ works and on the interview realized. The results confirm the transition context, by concomitant use of both softwares by many students, and bring into question the maintenance of products generated by new designing processes.
keywords	education; architectural design; Building Information Modeling; Computer-Aided Design
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	acadia12_199
id	acadia12_199
authors	Beorkrem, Chris ; Corte, Dan
year	2012
title	Zero-Waste, Flat-Packed, Tri-Chord Truss: Continued Investigations of Structural Expression in Parametric Design"
doi	https://doi.org/10.52842/conf.acadia.2012.199
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 199-208
summary	The direct and rapid connections between scripting, modeling and prototyping allow for investigations of computation in fabrication. The manipulation of planar materials with two-dimensional CNC cuts can easily create complex and varied forms, volumes, and surfaces. However, the bulk of research on folding using CNC fabrication tools is focused upon surfaces, self-supporting walls and shell structures, which do not integrate well into more conventional building construction models. This paper attempts to explain the potential for using folding methodologies to develop structural members through a design-build process. Conventional building practice consists of the assembly of off-the-shelf parts. Many times, the plinth, skeleton, and skin are independently designed and fabricated, integrating multiple industries. Using this method of construction as an operative status quo, this investigation focused on a single structural component: the truss. Using folding methodologies and sheet steel to create a truss, this design investigation employed a recyclable and prolific building material to redefine the fabrication of a conventional structural member. The potential for using digital design and two-dimensional CNC fabrication tools in the design of a foldable truss from sheet steel is viable in the creation of a flat-packed, minimal waste structural member that can adapt to a variety of aesthetic and structural conditions. Applying new methods to a component of the conventional ‘kit of parts’ allowed for a novel investigation that recombines zero waste goals, flat-packing potential, structural expression and computational processes. This paper will expand (greatly) upon previous research into bi-chord truss designs, developing a tri-chord truss, which is parametrically linked to its structural moment diagram. The cross section of each truss is formed based on the loading condition for each beam. This truss design has been developed through a thorough series of analytical models and tests performed digitally, to scale and in full scale. The tri-chord truss is capable of resisting rotational failures well beyond the capacity of the bi-chord designs previously developed. The results are complex, and elegant expressions of structural logics embodied in a tightly constrained functional design.
keywords	Parametric Design , Structural Expression , Material constraints
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ijac201210108
id	ijac201210108
authors	Celani, Gabriela; Carlos Eduardo Verzola Vaz
year	2012
title	CAD Scripting and Visual Programming Languages for Implementing Computational Design Concepts: A Comparison from a Pedagogical Point of View
source	International Journal of Architectural Computing vol. 10 - no. 1, 121-138
summary	This paper compares the use of scripting languages and visual programming languages for teaching computational design concepts to novice and advanced architecture students. Both systems are described and discussed in terms of the representation methods they use. With novice students better results were obtained with the visual programming language. However, the generative strategies used were restricted to parametric variation and the use of randomness. Scripting, on the other hand, was used by advanced students to implement rule-based generative systems. It is possible to conclude that visual languages can be very useful for making architecture students understand general programming concepts, but scripting languages are fundamental for implementing generative design systems. The paper also discusses the importance of the ability to shift between different representation methods, from more concrete to more abstract, as part of the architectural education.
series	journal
last changed	2019/07/30 10:55

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2012_107
id	caadria2012_107
authors	Gerber, David and A. Senel Solmaz
year	2012
title	PARA-Typing the making of difference: Associative parametric design methodologies for teaching the prototyping of material affect
doi	https://doi.org/10.52842/conf.caadria.2012.233
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 233–242
summary	PARA-Typing the Making of Difference presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. These design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation. Then through associative parametric design technologies and methodologies, modular fields were design explored and developed in concert with material properties and constraints. Utilising digital fabrication full-scale installations were designed, manufactured, and constructed as tiled walls that created differentiated space within site-specific configurations.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; tectonics
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201210403
id	ijac201210403
authors	Gerber, David J.
year	2012
title	PARA-Typing Informing Form and the Making of Difference
source	International Journal of Architectural Computing vol. 10 - no. 4, 501-520
summary	This paper presents design research and instruction into the use of constraint based digital and analogue modelling techniques and the development of associative parametric models to simulate highly differentiated fabricated form. One set of these design research projects were conceived as manual analogue generative processes for prototyping modularity and serial differentiation.Then through parametric design techniques, modular aggregations were design explored and developed in concert with material properties and constraints. Utilizing digital fabrication full-scale installations were designed, manufactured, and for site-specific configurations. A second set of projects provides an extension of the design instruction that includes the integration of performance criteria into these design objectives.The objectives of the research are to present benefits and limitations of the incorporation of parametric design, performance analysis, and prototyping techniques in comprehensive studio instruction.The paper discusses the resultant informed materialized difference and the impacts on achieving reinforced and hands on learning objectives.
keywords	Generative design; parametric modelling; prototyping; digital fabrication; design pedagogy; performative design
series	journal
last changed	2019/05/24 09:55

_id	caadria2012_109
id	caadria2012_109
authors	Gerber, David; Mohamed M. ElSheikh and Aslihan Senel Solmaz
year	2012
title	Associative parametric design and financial optimisation - 'Cash Back 1.0': Parametric design for visualising and optimising Return on Investment for early stage design decision-making
doi	https://doi.org/10.52842/conf.caadria.2012.047
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 47–56
summary	Cash-Back 1.0 presents research on the development of methodologies and technologies to simulate the cause and effect of early stage geometric design alternatives of buildings and the real time results upon financial pro-forma. Through the encoding of design rules and their associative relationships to financial pro-forma the research illustrates enhanced visualization of early stage building design decisions and their cumulative impact on financial goals and constraints. The research presents value an associative parametric design process affords often-disparate domains through correlation and visualization. The paper describes incorporation of a feedback loop between pro-forma and geometric models in conjunction with an optimization method. Given the level of uncertainty in early stage design decision making the research contributes partial solutions to the domain problems of design decision uncertainty and design cycle latency and is further argumentation for increased use of parametric design methods and automation to support design domain integration.
keywords	Parametric design; genetic algorithm; design decision support; multi domain optimisation; domain integration
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2012_247
id	sigradi2012_247
authors	Gomes, Lucas Ariel; Barbosa, Wilson; Araújo, André Luís; Celani, Gabriela
year	2012
title	Exercício Projetual de uma Estrutura de Cobertura com a Utilização do Diagrama de Voronoi no plug-in Grasshopper [Design experiment with the use of Voronoi Diagrams in Grasshopper plug-in: a roof structure]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 636-640
summary	This paper describes a design experiment with the use of Voronoi Diagrams, a systematic division of the metric space based on a set of points. Automated procedures were used in the process: a script that generated sets of random points and a plug in that automatically generated polygons based on these points. Computer models, scale models and full scale prototypes were produced in order to develop construction details and preview results. It was possible to conclude that the use of a generative method along with automated procedures is far from restricting creativity, allowing the quick exploration of multiple design alternatives.
keywords	Roof structure; Voronoi Diagram; Grasshopper
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2012_031
id	caadria2012_031
authors	Ji, Guohua; Ying Xu and Ying Wang
year	2012
title	3D urban space information system: A preliminary prototype based on Google Earth plugin
doi	https://doi.org/10.52842/conf.caadria.2012.359
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 359–368
summary	2D GIS has shown its limitations in many situations, especially when it’s applied in urban design. Many studies have been carried out to deal with the problem. Some attempted to link 3D visualisation to data stored within 2D GIS, and others tried to combine GIS, CAD and visualisation together. They all aim to meliorate current GIS for 3D applications. The authors of this paper developed a preliminary prototype of a 3D urban space information system based on Google Earth Plugin. It sets up a server to store and offer specific urban space information. With the desktop application that embeds Google Earth Plugin, user can upload and download models on the server, view them in the virtual 3D environment of Google earth, and make models directly in the 3D environment. A server-side database plays the role of managing information. This paper introduces the key ideas and methods of the system development, including system structure, set-up of the serve, server side information management, and interactive modelling functions.
keywords	GIS; urban design; Google Earth plugin; VB.Net
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2012_041
id	caadria2012_041
authors	Lin, Yifeng and Shanshan Shen
year	2012
title	Designing a performance-oriented house envelope based on a parametric approach: An integrated method
doi	https://doi.org/10.52842/conf.caadria.2012.507
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 507–516
summary	Conventional house envelope design methods often generate few alternatives related to meeting living comfort and building environmental requirements. However, these design methods are increasingly facing difficulties in following the dynamic climate change and advanced building performance conditions in the early stage of the design process. This paper attempts to introduce an integrated method for designing a performance-orientated house envelope in New Zealand which adopts the parametric approach. This approach can guide and assist designers to make a well-informed decision, which can satisfy both aesthetics and energy performance, and gain more efficiency for the design process in the early stage of housing performance simulation.
keywords	Performance-oriented house envelope design; integrated parametric design; dynamic approach
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ascaad2012_006
id	ascaad2012_006
authors	Taron, Joshua M.
year	2012
title	Structurally Intelligent Swarms: Exploiting Interoperability Toward Generative Design
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 33-47
summary	The potential afforded by the open search spaces of both agent-based models and evolutionary engines have given architecture yet another set of computational tools to play with, yet more often than not, they are used in isolation from one another. This research explores the set of techniques and results of having combined swarm formations, FEM software and an evolutionary engine within a parametric modeling environment such that they induce structurally intelligent swarm (SIS) morphologies. These morphologies are situated within normative architectural assemblies by means of parametric grafting techniques. Savage gothic materiality, as described by John Ruskin, as well as the work of Eva Hesse are referenced as the basis for these explorations. Speculations are made as to refining the engineering capabilities, expanding on programmatic applications and testing integrated SIS assemblies at larger scales.
series	ASCAAD
type	normal paper
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_006.pdf
last changed	2021/07/16 10:39

_id	ecaade2012_317
id	ecaade2012_317
authors	Boeykens, Stefan ; Himpe, Caroline ; Martens, Bob
year	2012
title	A Case Study of Using BIM in Historical Reconstruction: The Vinohrady synagogue in Prague
doi	https://doi.org/10.52842/conf.ecaade.2012.1.729
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 729-737.
summary	This article refl ects on the digital reconstruction of the Vinohrady Synagogue in Prague, which was demolished in 1951. Based on an international collaboration through the Erasmus program, expertise derived from other Viennese synagogue reconstructions at TU Vienna was combined with a resource organization methodology developed at KU Leuven. The reconstruction process is carried out using BIM software, which poses some particular attention on the software methodology and model structure, but at the same time illustrates the added value of a BIM approach, when comparing with more traditional CAD modelling systematics. Of particular interest is the approach for modelling complex geometry, integrating with more traditional 2D documents and for visualizing reconstruction assumptions within the 3D model representation.
wos	WOS:000330322400077
keywords	Virtual reconstruction; destroyed synagogue; 3D-modeling; BIM; urban context
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2012_262
id	ecaade2012_262
authors	Pasternak, Agata
year	2012
title	Robotic Prototypes Optimization: Incorporation of Optimization Procedures in the Design Process
doi	https://doi.org/10.52842/conf.ecaade.2012.2.265
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 265-272
summary	The use of computer-aided design combined with robotics and evolutionary principles of optimization, during the architectural design process, is discussed in this paper. The research is based on the examples of four case studies out of six projects designed during the Experimental Design Studio: ROBO Studio and a parallel seminar on optimization techniques on Architecture for Society of Knowledge Master course at Warsaw University of Technology, Faculty of Architecture. The project’s main goal was to combine robotic prototypes construction with an optimization process executed in parallel within one design procedure. The results of the course and the discussion about the impact of both factors on the architectural design process are presented in this paper.
wos	WOS:000330320600026
keywords	Genetic algorithm; optimization; robotics; Galapagos, Firefly, digital fabrication, design integration, kinetic structures
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:59

_id	caadria2014_124
id	caadria2014_124
authors	Williams, Nicholas; Sascha Bohnenberger and John Cherrey
year	2014
title	A System for Collaborative Design on Timber Gridshells
doi	https://doi.org/10.52842/conf.caadria.2014.441
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 441–450
summary	The bent timber laths of the Sound Bites gridshell create two types of performance space over an area of almost 100 m2. Such postformed gridshells are a wellestablished design solution for creating curved forms from linear elements. Extending principles developed since the 1970s, contemporary digital tools have been utilised to drive a renewed interest in them, primarily through so-called form-finding techniques which connect digital and material models through a simulation of shape under bending loads (Nettlebladt, 2013) and the definition of efficient structural geometry acting under compression loads only (Hernandez et. al., 2012). This paper describes the workflow conceived and implemented for the Sound Bites structure. A central challenge of the research was for such a workflow to allow for the principles of gridshell design to be engaged in parallel to other tight constraints and design drivers. As such it needed to facilitate close collaboration between architectural, engineering and fabrication experts. This workflow was tested in the design and realisation of the full-scale structure within a six-week period. The gridshell design was developed through the manipulation of the shape of two edge profiles and the shell form spanning between these. Architectural and fabrication constraints were met and the workflow allowed for a sufficient level of structural analysis to be fed back to inform the design.
keywords	Digital Workflow; Collaborative Design; Digital Formfinding; Digital Fabrication
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2012_007
id	ascaad2012_007
authors	Abdelsalam, Mai M.
year	2012
title	The Use of Smart Geometry in Islamic Patterns - Case Study: Mamluk Mosques
source	CAAD \| INNOVATION \| PRACTICE [6th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2012 / ISBN 978-99958-2-063-3], Manama (Kingdom of Bahrain), 21-23 February 2012, pp. 49-68
summary	It is noted that architects need new and quick methods designing the historic architectural styles, as well as restoring the historical urban areas particularly the Islamic ones. These designs and restorations should adapt to the basics of the Islamic style used; general concept, module and features. Smart Geometry provides advanced design concepts and increases alternative variations. Parametric design softwares also add more rules and relations on the design process. Obviously, the Islamic module and proportions are used as design generators that result in extracting a number of alternatives easily in a little time. Generative Components (GC) is the parametric software used to achieve the desired objectives of this research.
series	ASCAAD
email
more	http://www.ascaad.org/conference/2012/papers/ascaad2012_007.pdf
last changed	2012/05/15 20:46

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: