Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 551

Reformat results as: short short into frame detailed detailed into frame

_id	acadia12_127
id	acadia12_127
authors	Burry, Jane ; Burry, Mark ; Tamke, Martin ; Thomsen, Mette Ramsgard ; Ayres, Phil ; Leon, Alex Pena de ; Davis, Daniel ; Deleuran, Abders ; Nielson, Stig ; Riiber, Jacob
year	2012
title	Process Through Practice: Synthesizing a Novel Design and Production Ecology
doi	https://doi.org/10.52842/conf.acadia.2012.127
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 127-138
summary	This paper describes the development of a design and prototype production system for novel structural use of networked small components of wood deploying elastic and plastic bending. The design process engaged with a significant number of different overlapping and interrelated design criteria and parameters, a high level of complexity, custom component geometry and the development of digital tools and procedures for real time feedback and productivity. The aims were to maximize learning in the second order cybernetic sense through empirical experience from analogue modeling, measurement and digital visual feedback and to capture new knowledge specifically regarding intrinsic material behavior applied and tested in a heterogeneous networked context. The outcome was a prototype system of design ideation, conceptualization, development and production that integrated real time material performance simulation and feedback. The outcome was amplified through carrying out the research over a series of workshops with distinct foci and participation. Two full scale demonstrators have so far been constructed and exhibited as outputs of the process.
keywords	Material behavior , Complex modeling feedback , progressive synthetic learning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia12_117
id	acadia12_117
authors	Mankouche, Steven ; Bard, Joshua ; Schulte, Matthew
year	2012
title	Digital Steam Bending: Re-Casting Thonet Through Digital Techniques
doi	https://doi.org/10.52842/conf.acadia.2012.117
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 117-126
summary	Digital Steam Bending is a design and fabrication research project that investigates the historically significant, regional technique of steam bending wood through the lens of digital technology.
keywords	Thonet , steambending , parametric
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	sigradi2012_104
id	sigradi2012_104
authors	Orciuoli, Affonso
year	2012
title	Marcenaria Digital: design e fabricação sustentável [Digital Carpentry: design and sustainable fabrication]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 653-656
summary	The new technologies applied into architecture and design is assisting new paradigms that are changing, radically, the “workflow between design and fabrication. In fact, both are extremely connected, like the handicraft. The same digital information that is used to design is feasible to be fabricated. The relationship between these technologies added to materials that came from nature, like the wood, are a field to be explored by designers. Right now we don´t know exactly how this new system will work, but there are no doubts that will change our near future.
keywords	fabricação digital, madeira, CNC, rizoma, mass customization
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	acadia12_157
id	acadia12_157
authors	Schwinn, Tobias ; Krieg, Oliver David ; Menges, Achim ; Mihaylov, Boyan ; Reichert, Steffen
year	2012
title	Machinic Morphospaces: Biomimetic Design Strategies for the Computational Exploration of Robot Constraint Spaces for Wood Fabrication
doi	https://doi.org/10.52842/conf.acadia.2012.157
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 157-168
summary	The paper presents research into computational design processes that integrate not only criteria of physical producibility but also characteristics of design intelligence and performance. In the first part, the use of an industrial robot’s design space for developing differentiated finger joint connections for planar sheets of plywood is being introduced. Subsequently, biomimetics is proposed as a filter for the possible geometric differentiations with respect performative capacities. The second part focuses on the integration of fabricational and biomimetic principles with structural and architectural demands, as well as by the development of a custom digital data structure for the fabrication of finger joint plate structures resulting in the construction of a full scale prototype. The paper concludes with evaluating the tolerances inherent in construction through 3D laser scan validation of the physical model.
keywords	Computational Design , Robotic Manufacturing , Digital Fabrication , Biomimetics , 3D Scanning
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2012_000
id	ecaade2012_000
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Digital Physicality
doi	https://doi.org/10.52842/conf.ecaade.2012.1
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 1 [ISBN 978-9-4912070-2-0], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 762 p.
summary	Digital Physicality is the first volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Physical Digitality. Together, both volumes contain 154 papers that were submitted to this conference.Physicality means that digital models increasingly incorporate information and knowledge of the world. This extends beyond material and component databases of building materials, but involves time, construction knowledge, material properties, space logic, people behaviour, and so on. Digital models therefore, are as much about our understanding of the world as they are about design support. Physical is no longer the opposite part of digital models. Models and reality are partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also influences the process, methods, and what or how we teach.The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Digital Physicality have their orientation mainly in the digital realm, and reach towards the physical part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac201210104
id	ijac201210104
authors	Ambrose, Michael A.
year	2012
title	Agent Provocateur - BIM In The Academic Design Studio
source	International Journal of Architectural Computing vol. 10 - no. 1, 53-66
summary	Building Information Modeling challenges academia to question the fundamental roles of abstraction and simulation in design education. Architectural education and practice assume a traditional set of visual conventions at varied scales and levels of detail, that when taken in concert signifies a whole, complete idea of a building, a correspondence between design intent and interpretation, between the representation of ideas and the design of buildings. BIM viewed as provocateur to these assumptions provides potential critical analysis of how architectural design is taught. Academia must seek out new design methodologies for exploring architecture that reflect the representational shift of BIM by developing teaching methods that reprioritize ways of seeing, thinking and making. This paper describes a studio model that seeks out new active methods for exploring architecture that embrace this shift by developing processes that provoke novel ways to reconcile the traditions of abstraction and the opportunities of synthetic simulation.
series	journal
last changed	2019/07/30 10:55

_id	sigradi2012_272
id	sigradi2012_272
authors	Amindarbari, Reza
year	2012
title	Morphological indicators of solar exposure
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 414-418
summary	This paper investigates the relation between the shading condition and geometrical configuration of neighborhood-scale developments. It introduces a straightforward method for measuring shadow areas casted on buildings’ roofs and facades – in urban areas – using digital 3D models. Employing this method for measuring shadow areas in nine neighborhoods in Jinan, China, at six different time points on summer and winter solstices – a total of 54 sample measurements – this study develops two regression models that reveal the significant dependency of the in-shadow percentage of buildings’ façade and roof areas to the building volume density (BVD) and height irregularity (HI) of the urban fabric.
keywords	urban form, geometrical configuration, solar exposure, shadow area
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2012_214
id	ecaade2012_214
authors	Das, Subhajit ; Dutt, Florina
year	2012
title	Design optimization in a hotel and offi ce tower through intuitive design procedures and advanced computational design methodologies. Façade design optimization by computational methods
doi	https://doi.org/10.52842/conf.ecaade.2012.1.235
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 1 / ISBN 978-9-4912070-2-0, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 235-243
summary	The research topic of this paper exemplifies design optimization techniques of a hotel/office tower in Central China (Nanjing city), which faces subtropical humid climate throughout the year. The main intent of the project is to fi nd optimized design solution with the aid of parametric design tools and Visual Basic Scripting techniques (in Rhino Script & Grasshopper) combined with intuitive design process. In any urban context, we firmly believe that architectural design is a responsive phenomenon, which faces diverse interaction with the user & the local climate. The building design of the proposed tower acknowledges these responsive factors of the design with the environment along with building users or residents. Consequently, we strive to develop a sustainable design solution, which is ecologically efficient and psychologically conducive to the wellbeing of the user. We developed our intuitive design product with complex computational design toolsets to leverage design and energy efficiency. In this procedure, we draw major design concepts and geometrical typologies from natural systems in the form of bio mimicry or biologically inspired design process. Overall, this research paper outlines the significance and relevant benefi ts of the combination of intuitive design (from experience, expertise and architects skills) with parametric scripting tools.
wos	WOS:000330322400023
keywords	Sustainable Building Façade; Parametric Architecture; Intelligent building skin; Solar Architecture
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2023_318
id	ecaade2023_318
authors	Imam, Chowdhury Ali, Othman, Hanin Abdel Salam and Çapunaman, Özgüç Bertug
year	2023
title	Robotic Plaster Carving: Formalizing subtractive detailing of plaster surfaces for construction and crafts
doi	https://doi.org/10.52842/conf.ecaade.2023.1.397
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 397–406
summary	Plaster has been a fundamental material in numerous interior and exterior applications in architectural construction due to its fire-resistant properties and capabilities for intricate detailing. Moreover, prior to the widespread adoption of computer-aided design tools, plaster played a crucial role in historic preservation and architectural education (Mankouche & Schulte, 2012). While the use of decorative plaster elements in architectural construction has waned in popularity, the renewed interest in plaster within the context of advanced robotic fabrication offers a compelling basis for research. This paper presents an investigation into robotic plaster carving for adding detail and texture to plaster surfaces. Within the scope of this study, we identify and systematically examine various fabrication and material parameters for emergent geometries and fabrication defects, subsequently formalizing this robotic workflow for diverse applications in construction and crafts. Among these parameters, we primarily concentrate on toolpath geometry, tool orientation, carving speed, carving profile, and aggregation of carving strokes. Through this bottom-up approach, our objective is to enhance the understanding of tool-material interaction during the fabrication process and achieve improved control over the resulting artifact. Building on these insights, we demonstrate how the proposed robotic plaster carving workflow can be employed for subtractive surface detailing in architectural construction and digital crafts.
keywords	Robotic Fabrication, Plaster Carving, Surface Detailing, Digital Craft
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2017_142
id	caadria2017_142
authors	Kaijima, Sawako, Tan, Ying Yi and Lee, Tat Lin
year	2017
title	Functionally Graded Architectural Detailing using Multi-Material Additive Manufacturing
doi	https://doi.org/10.52842/conf.caadria.2017.427
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 427-436
summary	The paper presents a future architectural detailing strategy enabled by the design of functionally graded materials (FGM). In specific, our proposal suggests the possibility of removing mechanical fasteners and adhesives from joint details. This is achieved by combining the principles of interlocking joineries found in traditional timber structures and current Multi-Material Additive Manufacturing (MMAM) technology to materialise FGMs. FGM belongs to a class of advanced materials characterised by variation in properties as the dimension varies by combining two or more materials at a microscopic scale (Mahamood et al. 2012). FGM is ubiquitous in nature and, when properly designed, can exhibit superior performance characteristics compared to objects comprised of homogeneous material properties. With the aim of developing interlocking details with improved performance, reliability, and design flexibility, we focus on controlling material stiffness, joint fitting, and geometry through the design of the microscopic material layout. A case study design will be presented to illustrate the process.
keywords	Functionality Graded Material; Multi-Material Additive Manufacturing ; Architectural Detailing; Interlocking Joints
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2012_152
id	ecaade2012_152
authors	Krieg, Oliver David; Mihaylov, Boyan; Schwinn, Tobias; Reichert, Steffen; Menges, Achim
year	2012
title	Computational Design of Robotically Manufactured Plate Structures Based on Biomimetic Design Principles Derived from Clypeasteroida
doi	https://doi.org/10.52842/conf.ecaade.2012.2.531
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 531-540
summary	The paper presents the current development of an ongoing research project about the integration of robotic fabrication strategies in computational design through morphological and functional principles derived from natural systems. Initially, a developed plate structure material system based on robotically fabricated fi nger joints is being informed by biomimetic principles from the sea urchin Clypeasteroida in order to be able to adapt effi ciently to its building environment. Consequently, the paper’s main focus lies on translating the biomimetic design principles into a computational design tool, also integrating fabrication parameters as well as structural and architectural demands. The design tool’s capability to integrate these parameters is shown by the design, development and realization of a full-scale research pavilion. The paper concludes with discussing the performative capacity of the developed material system and the introduced methodology.
wos	WOS:000330320600056
keywords	Biomimetics; Digital Simulation; Parametric Design; Robotic Manufacturing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia12_343
id	acadia12_343
authors	Leidi, Michele ; Schlüter, Arno
year	2012
title	Formal and Functional Implications of Dynamics-Related Solar Design Schemes
doi	https://doi.org/10.52842/conf.acadia.2012.343
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 343-354
summary	In recent years several solar radiation simulation tools have been developed to assist architects in analyzing the performance of existing building designs. However it is often unclear how the results of these analyses can help to generate new solutions and thus be truly beneficial for innovation in sustainable architectural design. Recent developments in open source applications that allow links between energy simulation engines and 3D modeling environments open a new layer of understanding. The possibility to better understand the dynamic interaction between incident solar radiation and building envelopes allows the synthesis of new architectural design-schemes. This paper presents the results of a series of experiments based on the case-study of a mid-latitude single-family house in Taiki-Cho, Japan. The first experiment describes how the incident solar energy interacts with the exposed components of the envelope. The second experiment describes how the energy demand of the building can be partially reduced through the design of passive interventions that are based on the dynamics of the demand. Finally, the third experiment exemplifies how, based on the knowledge extracted from the first two experiments, it is possible to synthesize new dynamics-related solar design-schemes that join passive techniques, active technologies, and formal aspects.
keywords	Form , Function , Dynamics , Solar , Design-Scheme , Mid-latitude
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	caadria2012_046
id	caadria2012_046
authors	Lertsithichai, Surapong
year	2012
title	Building Thailand's tallest Ganesh: CAD/CAM integration in conventional metal fabrication
doi	https://doi.org/10.52842/conf.caadria.2012.337
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 337–346
summary	Ganesh (Ganesa or Ganesha) is a Hindi god well known for his distinguishable elephant head and widely revered as the god of success or remover of obstacles. Patrons in Thailand have worshipped Ganesh and respected him by means of erecting statues of Ganesh in various poses and sizes throughout the country. In late 2008, the people of Chacheongsao, a province located East of Bangkok, decided to create Thailand’s tallest standing Ganesh statue made with bronze reaching heights up to 39 meters and situated on the Bangpakong river bank overseeing the city and its people. The author and design team was approached by representatives from Chacheongsao and commissioned to advise the process from conception to construction. The challenge started with seeking appropriate computer-aided design and manufacturing technologies and innovative processes to guide the design team throughout the production. The 0.60-meter bronze cast sculpture of the Ganesh was scanned using a 3D optical scanner to generate a solid model of the statue. A surface model was then extracted from the 3D model to firstly determine the most efficient structural support within the statue and secondly to generate surface strips for the foundry to create actual bronze casts. The construction of the project began early 2009 and the statue has since been erected from its base to currently its head. During construction, the author and design team has encountered several problems translating pixels to parts. Several errors have occurred during the mould and cast production process as well as construction errors on site causing mismatches of the structure and surface, misalignments, and protruding structural supports and joints. The lessons learned from this project is documented and analysed with hopes to create a more effective process for future projects with similar requirements.
keywords	CAD/CAM; 3D scanner; CNC milling; metal fabrication
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2023_259
id	ecaade2023_259
authors	Sonne-Frederiksen, Povl Filip, Larsen, Niels Martin and Buthke, Jan
year	2023
title	Point Cloud Segmentation for Building Reuse - Construction of digital twins in early phase building reuse projects
doi	https://doi.org/10.52842/conf.ecaade.2023.2.327
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 327–336
summary	Point cloud processing has come a long way in the past years. Advances in computer vision (CV) and machine learning (ML) have enabled its automated recognition and processing. However, few of those developments have made it through to the Architecture, Engineering and Construction (AEC) industry. Here, optimizing those workflows can reduce time spent on early-phase projects, which otherwise could be spent on developing innovative design solutions. Simplifying the processing of building point cloud scans makes it more accessible and therefore, usable for design, planning and decision-making. Furthermore, automated processing can also ensure that point clouds are processed consistently and accurately, reducing the potential for human error. This work is part of a larger effort to optimize early-phase design processes to promote the reuse of vacant buildings. It focuses on technical solutions to automate the reconstruction of point clouds into a digital twin as a simplified solid 3D element model. In this paper, various ML approaches, among others KPConv Thomas et al. (2019), ShapeConv Cao et al. (2021) and Mask-RCNN He et al. (2017), are compared in their ability to apply semantic as well as instance segmentation to point clouds. Further it relies on the S3DIS Armeni et al. (2017), NYU v2 Silberman et al. (2012) and Matterport Ramakrishnan et al. (2021) data sets for training. Here, the authors aim to establish a workflow that reduces the effort for users to process their point clouds and obtain object-based models. The findings of this research show that although pure point cloud-based ML models enable a greater degree of flexibility, they incur a high computational cost. We found, that using RGB-D images for classifications and segmentation simplifies the complexity of the ML model but leads to additional requirements for the data set. These can be mitigated in the initial process of capturing the building or by extracting the depth data from the point cloud.
keywords	Point Clouds, Machine Learning, Segmentation, Reuse, Digital Twins
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2012_002
id	ecaade2012_002
authors	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejdan, Dana (eds.)
year	2012
title	Physical Digitality
doi	https://doi.org/10.52842/conf.ecaade.2012.2
source	Proceedings of the 30th International Conference on Education and research in Computer Aided Architectural Design in Europe - Volume 2 [ISBN 978-9-4912070-3-7], Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, 714 p.
summary	Physical Digitality is the second volume of the conference proceedings of the 30th eCAADe conference, held from 12-14 september 2012 in Prague at the Faculty of Architecture of Czech Technical University in Prague. The companion volume is called Digital Physicality. Together, both volumes contain 154 papers that were submitted to this conference. Digitality is the condition of living in a world where ubiquitous information and communication technology is embedded in the physical world. Although it is possible to point out what is “digital” and what is “real,” the distinction has become pointless, and it has no more explanatory power for our environment, buildings, and behaviour. Material objects are invested with communication possibilities, teams are communicating even when not together, and buildings can sense and respond to the environment, each other, and to inhabitants. Digital is no longer an add-on, extra, or separate software. Reality is partly digital and partly physical. The implication of this condition is not clear however, and it is necessary to investigate its potential. New strategies are necessary that acknowledge the synergetic qualities of the physical and the digital. This is not limited to our designs but it also infl uences the process, methods, and what or how we teach. The subdivision of papers in these volumes follow the distinction made in the conference theme. The papers in Physical Digitality have their orientation mainly in the physical realm, and reach towards the digital part. It has to be granted that this distinction is rather crude, because working from two extremes (digital versus physical) tends to ignore the arguably most interesting middle ground.
keywords	Digital physicality; physical digitality
series	eCAADe
email
last changed	2022/06/07 07:49

_id	sigradi2012_186
id	sigradi2012_186
authors	Aghaei Meibodi, Mania; Aghaiemeybodi, Hamia
year	2012
title	Symbiosis of Structural & Non-Structural properties in Building
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 602-606
summary	This paper highlights the different interplays between structural and non-structural parts in building artifact as the result of modes of building processes and massing. The massing is understood as processes of assembling material into a body through which we identify with the building physically. In the last decade architecture discipline as the result of technological inventions has faced shifts in the design processes, massing processes and topology of the artefact. In which we witness integral coexistence between the structural and non-structural elements of building. In this paper the seeds of this integral interplay is scrutinised through the study of design and massing processes of a multi-functional pavilion prototype as a case study.
keywords	digital surface; prototype; design processes; structural; formation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia12_47
id	acadia12_47
authors	Aish, Robert ; Fisher, Al ; Joyce, Sam ; Marsh, Andrew
year	2012
title	Progress Towards Multi-Criteria Design Optimisation Using Designscript With Smart Form, Robot Structural Analysis and Ecotect Building Performance Analysis"
doi	https://doi.org/10.52842/conf.acadia.2012.047
source	ACADIA 12: Synthetic Digital Ecologies [Proceedings of the 32nd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-62407-267-3] San Francisco 18-21 October, 2012), pp. 47-56
summary	Important progress towards the development of a system that enables multi-criteria design optimisation has recently been demonstrated during a research collaboration between Autodesk’s DesignScript development team, the University of Bath and the engineering consultancy Buro Happold. This involved integrating aspects of the Robot Structural Analysis application, aspects of the Ecotect building performance application and a specialist form finding solver called SMART Form (developed by Buro Happold) with DesignScript to create a single computation environment. This environment is intended for the generation and evaluation of building designs against both structural and building performance criteria, with the aim of expediently supporting computational optimisation and decision making processes that integrate across multiple design and engineering disciplines. A framework was developed to enable the integration of modeling environments with analysis and process control, based on the authors’ case studies and experience of applied performance driven design in practice. This more generalised approach (implemented in DesignScript) enables different designers and engineers to selectively configure geometry definition, form finding, analysis and simulation tools in an open-ended system without enforcing any predefined workflows or anticipating specific design strategies and allows for a full range of optimisation and decision making processes to be explored. This system has been demonstrated to practitioners during the Design Modeling Symposium, Berlin in 2011 and feedback from this has suggested further development.
keywords	Design Optimisation , Scripting , Form Finding , Structural Analysis , Building Performance
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2012_223
id	sigradi2012_223
authors	Alvarado, Rodrigo Garcia; Mardones, Oscar Otárola
year	2012
title	Eco-losas: desarrollo de componentes constructivos más eficientes por análisis topológico y diseño paramétrico. [Eco-slabs: development of more efficient building components by topological analysis and parametric design]
source	SIGraDi 2012 [Proceedings of the 16th Iberoamerican Congress of Digital Graphics] Brasil - Fortaleza 13-16 November 2012, pp. 630-632
summary	It exposes a design and construction system for horizontal plates to work as slabs in regular concrete buildings. Based to an evolutionary finite-element analysis of the topological configuration to get a curved design with a 50% reduction of traditional volume, that provide lower cost, less carbon foot-print, better performance and innovative ceiling. A library of profiles is elaborated according different loads, support and dimensions and implemented in a parametric design system, in order to produce geometries for study theirs integration in the building and to elaborate digital fabrication files. Different constructive strategies are been studied, making several prototypes.
keywords	Losas, Análisis Topológico, Diseño Paramétrico, Fabricación Digital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2012_132
id	caadria2012_132
authors	Baerlecken, Daniel and David Duncan
year	2012
title	Junk: Design build studio
doi	https://doi.org/10.52842/conf.caadria.2012.305
source	Proceedings of the 17th International Conference on Computer Aided Architectural Design Research in Asia / Chennai 25-28 April 2012, pp. 305–314
summary	The paper presents a design build studio that investigates the role of waste as building material and develops a proposal for an installation that uses CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The paper describes the concept development and the construction process through the help of computational tools. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within a design build studio. What is junk? What is a building material? What are the aesthetics of junk?
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modelling
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2012_280
id	ecaade2012_280
authors	Baerlecken, Daniel; Reitz, Judith; Duncan, David
year	2012
title	Junk: Reuse of Waste Materials
doi	https://doi.org/10.52842/conf.ecaade.2012.2.143
source	Achten, Henri; Pavlicek, Jiri; Hulin, Jaroslav; Matejovska, Dana (eds.), Digital Physicality - Proceedings of the 30th eCAADe Conference - Volume 2 / ISBN 978-9-4912070-3-7, Czech Technical University in Prague, Faculty of Architecture (Czech Republic) 12-14 September 2012, pp. 143-150
summary	The paper presents a series of design build studio that investigate the role of waste as building material. The series develops proposals for constructions that use CAAD and CAM tools in combination with traditional fabrication tools to design and build an installation out of waste materials. The fi rst construction uses waste to create two installations that questions human consumption, The second project is a future project, that intends the use of waste as an actual building material. Recycling is in the process of becoming an integral part of sustainable architecture. However, there are very few digital design projects that use re-used or recycled materials in combination with their architectural and aesthetic qualities and potentials. The potential of such an investigation is explored within these design build studios. What is junk? What is a building material? What are the aesthetics of junk?
wos	WOS:000330320600014
keywords	Education in CAAD; digital fabrication and construction; practice-based and interdisciplinary CAAD; parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: