Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 19 of 19

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_135
id	sigradi2013_135
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva
year	2013
title	Identificação de Geometrias Implícitas na Arquitetura a Partir de Realidade Aumentada [Alignment Identification of Implicit Geometries in Architecture from Augmented Reality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 44 - 48
summary	For the initial stages of architectural training one of the strategies traditionally used is to study design cases. This exercise can help in the comprehension of implicit geometries and design processes. The use of the golden ratio, for example, is recurrent in the history of architecture. However, adequate instruments are necessary for this kind of statement. This paper demonstrates the use of Augmented Reality with this goal: virtual elements are viewed overlaying the architecture or its representation, configuring a “digital proportion measurer”. The comprehension of known architectural practices assists in structuring methods and constructing repertoires for architectural design.
keywords	Architecture analysis; Geometry; Augmented reality; Digital proportion measurer
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_281
id	sigradi2013_281
authors	Braida Rodrigues de Paula, Frederico; Lara Scanapieco Barreto; Felipe Arlindo Silva; Fernando Lima; Vinícius Morais
year	2013
title	Maquetes Híbridas: Diálogos Entre as Técnicas Tradicionais e as Tecnologias Digitais no Processo Projetual [Hybrid Models: Dialogues Between Traditional Techniques and Digital Technologies in the Design Process]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 49 - 53
summary	This article is about hybrid models, as a kind of three-dimensional representation emerged from of the possibilities of combining traditional techniques with digital technologies. The purpose is to reflect on the possibilities of production and applications of these types of hybrid models, highlighting them as recurring elements of design practice after the rise of new technologies of information and communication, and prototyping and digital manufacturing. By adopting the model as an object of research, we propose to expand the field of reflection on the incorporation of several digital technologies in the design process, specifically aspects of three-dimensional and graphical representation.
keywords	Hybrid models; Digital technologies; Architecture and Urbanism
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_189
id	sigradi2013_189
authors	Bruscato, Underléa; Clariana Fischer Brendler; Felipe Schneider Viaro; Fábio Gonçalves Teixeira; Régio Pierre da Silva
year	2013
title	Uso da Fabricação Digital e Prototipagem no Desenvolvimento do Projeto de Produto: Análises do Produto através de Simulações Digitais [Digital Manufacture and Rapid Prototyping in Product Design Development: Product Analysis through Digital Simulation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 459 - 463
summary	The aim of this paper is to design a public facilitie using both digital manufacture and rapid prototyping design methods. These new technologies have been used in product design development by some ways: helping in the comprehension of complex geometries; used as tools for analyzing the design process, thus avoiding errors in the project. The analysis were carried out using virtual simulation tests and physical prototype in reduced scale. The prototype was manufactured using the 3D printer V-Flash in the Virtual Design Laboratory – UFRGS, where positive and negatives aspects were identified and described.
keywords	Digital manufacture; Rapid prototyping; Virtual simulation; Product design; Urban facilities
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_350
id	sigradi2013_350
authors	de Freitas Pires, Janice; Carolina Machado Alves; Luisa dalla Vecchia; Adriane Borda Almeida da Silva; Ana Paula Dametto
year	2013
title	Padrões de Simetrias e Recursão em Ladrilhos Hidráulicos e Bandeiras: Exercícios Didáticos e Construção de Conhecimento Sobre Patrimônio Histórico [Symmetry and Recursion Patterns in Hydraulic Tiles and Fanlights: Didactic Exercises and Building Knowledge about Historic Heritage]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 595 - 599
summary	This paper describes activities of analysis and composition of patterns based on architectural elements of buildings of historic heritage. During two separate workshops, which used a method previously established, the rules of symmetry and recursion were recognized in the geometry of these architectural elements and new patters were created through dynamic processes of digital representation. Such activities can stimulate the students´ capacity of recognizing design actions, contributing to their perception of the design problems and, thus, to the knowledge for design practice.
keywords	Symmetry and recursion patterns; Historic heritage; Architectural elements; Digital graphic representation
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_95
id	sigradi2013_95
authors	Santos de Andrade, Ludmila; Neander Furtado Silva; Ecilamar Maciel de Lima; Igor Monteiro
year	2013
title	Os Sistemas BIM e a Redução de Inexatidões e Tempo nas Obras Públicas Brasileiras [BIM Systems and Reducing Inaccuracies and Time in the Brazilian Public Infrastructure]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 284 - 287
summary	The creation of an algorithm that will allow the quantitative accuracy of inputs, related to the Brazilian reality, inside the BIM platform will cause a decrease of the public costs of work. However, in this article only focus on how you can modify internally the BIM system platform for achieving the quantitative goals in planning materials. The new tool of construction planning and scheduling when using BIM systems's contribution, through the external database, will provide the construction control based on composition of inputs along the time that will allow a more economical execution to ensure the efficiency of public buildings.
keywords	Algorithm; Accuracy of inputs; BIM; Database; Planning; Scheduling; Public buildings
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2013_223
id	sigradi2013_223
authors	Silva Leite, Leandro; Alice Theresinha Cybis Pereira
year	2013
title	A Controvérsia entre os Métodos de Análise de Projetos de Referência em Arquitetura e o Ensino de Projeto Performativo [The Controversy Between Reference Projects Analysis Methods in Architecture and the Performative Design Teaching]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 581 - 585
summary	The architecture of the digital age yields complex shapes exemplars which once divulged on the internet, they become architectonic references. This article aims to discuss the influence of the reference projects analysis process (APR) in the projects generation within the current teaching. A comparative assessment of undergraduate final project has been carried out so as to identify the APR methods applied. From the application of the theory – Social Construction of Technologies (SCOT), the 05 facts that became evident show the controversy between the APR teaching processes and the interdisciplinary knowledge and abilities needed for the generation of complex and/or performative shapes.
keywords	Reference projects analysis; Architecture projects teaching; Performative project
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	sigradi2013_44
id	sigradi2013_44
authors	Silvano Costa, Márcia; Evangelos D. Christakou; Lenildo S. Da Silva; Antônio A. Nepomuceno
year	2013
title	Identificação de Danos em Fachadas de Edificações: Geração de Mosaicos Fotográficos Obtidos por Plataforma Robótica [Identification of damage on facades of buildings: Generating Mosaics Photographic obtained by Robotics Platform]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 161 - 165
summary	Damage in façades rendering is a problem that has been much discussed currently since such damage is important to the degradation process of building. There are many techniques to verify damages in façades and in other external parts of buildings; however, some techniques have restrictions regarding their practical applications. This work deals with the application of the remote sensing (RM) technique. Such technique derives from the need to identify, locate and scale, quickly, accurately and without human risk, the existing damage or potential damages that may appear in the façades of buildings. Moreover, the RM technique may help to detect damages not visible at long distance or in location of difficult access. This technique is performed by corrected high-resolution panoramic images generated from a mosaic of pictures taken with a standard digital camera coupled in a robotic platform. The Itamaraty Palace, a government building, located in Brasília - DF (Brazil), is the object of the present study. The correction of the Itamaraty Palace panoramic image was carried out so that the identification, quantification and mapping of the Palace façade damages were performed using specific softwares such as GigaPan Stitch, AutoCAD and ArcGIS.
keywords	Pathologies of Buildings; Panoramic Mosaics; Robotics Platform; Photos rectified and ArcGis
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	sigradi2013_195
id	sigradi2013_195
authors	Azevedo da Costa e Mattos, Erica; Diego Fagundes da Silva; José Ripper Kós
year	2013
title	Tecnologias Interativas e Processos de Criação: Experiências de Aprendizagem Transdisciplinares Associadas a um Hackerspace [Interactive Technologies and Creative Processes: Transdisciplinary Learning Experiences Associated with a Hackerspace]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 572 - 576
summary	The article presents an experience of association between a hackerspace and a multidisciplinary design studio at the Department of Architecture and Urbanism of the Federal University of Santa Catarina, during two semesters. The Tarrafa Hacker Club members shared their collaborative environment with the students and tutors throughout the academic experiment. The hacker culture highlighted dynamic relations that connect people, information, tools and matter. This approach has suggested meaningful speculations about the future of architecture education and practice.
keywords	Hackerspace; Multidisciplinarity; Creative process; Collaborative environment; Interactive technology
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_259
id	sigradi2013_259
authors	Barbosa Curi, Camila; Neander Furtado Silva
year	2013
title	Habitação na Sociedade de Informação: Configurador de Design para o Mercado Imobiliário Brasileiro [Housing in the Information Society: Design Configurator for the Brazilian Real Estate Market]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 76 - 80
summary	In this paper, we present preliminary specifications for a computer design tool for the application of mass customization in middle class apartment design in Brazil. Believing that in the digital era, network communication and digital design tools combined may create a design environment that considers consumer needs and preferences, we present a simple drafting of a computer tool that makes use of those concepts. And therefore we believe to contribute for the future construction of a design system that redefines problem scenarios, rather than providing individual solutions, repositioning architects and clients in the design process.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2017_062
id	sigradi2017_062
authors	Lima da Silva, Juliano; Andréa Quadrado Mussi, Lauro André Ribeiro, Thaísa Leal da Silva
year	2017
title	Programação em plataforma BIM e a Norma de Desempenho Brasileira: Desenvolvimento de uma aplicação para estimativa de performance acústica em projetos arquitetônicos [BIM platform programming and Brazilian Performance Standard: Development of an application to estimate acoustic performance in architectural design]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.423-428
summary	The Brazilian Performance Standard (NBR 15.575/2013 – Housing Buildings – Performance) is changing the design process of residential buildings, imposing new acoustic performance criteria. In this Context, the present paper proposes the programming of a Revit plug-in for verifying sound insulation of walls between environments, collecting information of the building’s model from a parameter database, calculating values of the elements’ sound reduction index and allowing to ponder constructive systems’ performance. The application aims to amplify productivity of designers and to provide greater control over technological solutions, assisting in the compliance with performance criteria.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2013_159
id	cf2013_159
authors	Celani, Gabriela; Vilson Zattera, Marcelo Fernandes de Oliveira, and Jorge Vicente Lopes da Silva
year	2013
title	“Seeing” with the Hands: Teaching Architecture for the Visually-Impaired with Digitally-Fabricated Scale Models
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 159-166.
summary	Accessibility of information for the visually-impaired has greatly benefited from information and communication technologies (ICT’s) in the past decades. However, the interpretation of images by the blind still represents a challenge. Bidimensional representations can be understood by those who have seen at least sometime in their lives but they are too abstract for those with congenital blindness, for whom three-dimensional representations are more effective, especially during the conceptualization phase, when children are still forming mental images of the world. Ideally, educators who work with the visually-impaired should be able to produce custom 3D models as they are needed for the explanation of concepts. This paper presents an undergoing project that aims at developing a protocol for making 3D technologies technically and economically available to them.
keywords	Tactile models, rapid prototyping, architectural concepts
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaadesigradi2019_405
id	ecaadesigradi2019_405
authors	da Cunha Teixeira, Luísa and Cury Paraizo, Rodrigo
year	2019
title	Caronae - ridesharing and first steps into commuting opportunitie of academic exchange
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 805-816
doi	https://doi.org/10.52842/conf.ecaade.2019.1.805
summary	Location-based mobile applications have been a rising theme for academics in the field of urbanism and in urban and transportation, because of the potential of transformation they might bring to the urban landscape (De Souza e Silva, 2013). One of the possibilities we study here is to observe social encounters fostered by commuting rides. In this paper, we try to examine the practice from the broad perspective of estimating the environmental benefits, in a context where digital information technology is wielded to address problems old and new (Townsend, 2014). This paper aims to analyze the potential of transformations that new ICTs bring to urban mobility, using as case study the official ridesharing system of the Federal University of Rio de Janeiro, the Carona? project. The system was developed focusing on the reduction of the number of motorized trips to the University, as well as the amount of CO2 generated by them. Here we analyze the dynamics of ridesharing, using the system data, and also try to observe the role it may play towards the promotion of integration in the UFRJ community.
keywords	mobile apps; urban mobility; ridesharing; caronae ufrj
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	sigradi2013_375
id	sigradi2013_375
authors	Dametto, Ana Paula; Adriane Borda Almeida da Silva; Janice de Freitas Pires; Luisa dalla Vecchia
year	2013
title	A Lógica Compositiva dos Artefatos Metálicos da Arquitetura Eclética de Pelotas [The Logic of Composition in Metallic Artifacts of Pelotas´ Eclectic Architecture]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 604 - 607
summary	This paper describes a method of analysis of metallic artifacts present in the eclectic buildings considered cultural heritage in the city of Pelotas. This kind of analysis is configured as a reference in order to structure didactic content to be used in courses which discuss the geometry of form in a context of architectural training. These analyses demonstrate the potential of identifying basic concepts of geometry which can be viewed in a concrete manner in the compositions being analyzed.
keywords	Metallic artifacts of Pelotas; Analysis of geometric composition; Eclectic architecture; Didactic activities
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	sigradi2013_271
id	sigradi2013_271
authors	Lobos, Danny; Gerth Wandersleben; Lorena Silva Castillo
year	2013
title	Mapeo de Interoperabilidad entre BIM y software de Simulación Energética para Chile [Mapping the Interoperability between BIM and Energy Simulation Software for Chile]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 378 - 382
summary	The Research focuses on possible links between (Building Information Modeling), the Building Energy Performance Requirements and BPS software (Building Performance Simulation). It is expected to establish critical paths within the interoperability processes between BIM and BPS to support architects and energy consultants to choose the most appropriated workflow for the analyzed buildings to fulfill the performance requirements given by the Chilean laws. Several study cases in interoperability and the state-of-the-art are presented and discussed. Finally a novel map of relation between these three areas is presented.
keywords	Building information modeling; Building performance simulation; Building performance standards; Architectural design, Interoperability
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_379
id	sigradi2013_379
authors	Monteiro de Menezes, Alexandre; Maria de Lourdes Silva Viana; Mário Lucio Pereira Junior; Sérgio Ricardo Palhares
year	2013
title	CAD e BIM: Evolução ou Revolução na Aprovação de Projetos de Edificações nas Instâncias Legais? [CAD and BIM: Evolution or Revolution in Building Projects Approval in Legal Instances?]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 302 - 306
summary	This research compared CAD and BIM, seeking to identify evolution, or revolution, in the field of building projects, focusing on municipal approval. The research sought to understand municipal, state and federal normative to approve architectural projects and studied CAD and BIM in the light of the technical documents generation submitted for building projects evaluation and approval. The aim was to compare the efficiency of 3D model for the analysis of projects in municipalities. The results identify adequacies and inadequacies on both platforms, but also formulate suggestions for improvements in the process of evaluation and approval of projects by local governments.
keywords	BIM; Architectural design; Projects approval; Graphic communication; Buildings construction
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2013_285
id	sigradi2013_285
authors	Caldera, Sebastián; Gonzalo Silva; Mauricio Loyola
year	2013
title	Uso de Herramientas Paramétricas de Optimización Evolutiva y Simulación Energética en el Diseño Basado en Performance [Using Evolutionary Optimization and Energy Simulation Tools in Performance-based Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 343 - 347
summary	This article describes three cases of integration of technologies of evolutionary optimization and energy simulation in performance-based design. The aim is to share the details of the process of creation, validation and use of the various techniques and tools, with an emphasis on the mistakes and successes obtained, so that experiences can be useful for non-specialist users interested in working with these methodologies.
keywords	Parametric design; Grasshopper 3D; Ecotect; GECO; Galápagos
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_6.329
id	sigradi2015_6.329
authors	Silva, Diego Borges da; Gonçalves, Berenice S.
year	2015
title	Info Exame magazine evaluation from heuristics for tablets
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 239-247.
summary	The emergence of mobile reading devices such as tablets provided a new trend in the distribution of content in the universe of publications. As changes occur, many ways of consuming information are offered by digital devices. Thus, this study evaluated the application of the Info Exame magazine, regarding its accessibility, usability and user experience. As a method, the heuristics focusing on publications for tablets, proposed by Heikkilä (2013), were employed. Finally, the design was conceived as the very information tool, as it facilitates the connection between the print media and digital media.
keywords	Digital Magazines, Heuristic Evaluation for Tablets, Interfaces
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	sigradi2013_64
id	sigradi2013_64
authors	Cardoso, Eduardo; Sérgio Leandro dos Santos; Fábio Pinto da Silva; Fábio Gonçalves Teixeira; Tânia Luísa Koltermnann da Silva
year	2013
title	Tecnologias Tridimensionais para Acessibilidade em Museus [Three-dimensional Technologies for Accessibility in Museums]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 444 - 448
summary	New technologies for 3D scanning and digital fabrication have greatly contributed to the research and production of artifacts and accessibility services to artistic fruition in museums. Thus, this article presents the results of research conducted in the discipline of 3D Technologies of the Design Graduate Program at the Federal University of Rio Grande do Sul. The work consisted in the research, selection and employment of scanning technologies for 3D scanning of artifacts from the Museum's collection Joaquim José Felizardo - Porto Alegre - RS, for subsequent production of tactile replicates, as an example and validation of these applications in this context.
keywords	Accessibility, Museums, Three-dimensional scanning, Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	sigradi2013_167
id	sigradi2013_167
authors	Milioli, Larissa; Neander Furtado Silva
year	2013
title	As Implicações Formais do Uso de Diferentes Sistemas CAD e Prototipagem Rápida no Início do Processo de Projeto de Arquitetura [Formal Implications of Using Different Systems CAD and Rapid Prototyping in Early Architectural Design Process]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 454 - 458
summary	This article presents the formal results obtained from the same project, defined at the initial stage, modeled in three different CAD systems, exported and prototyped in two different types of three-dimensional printer. These digital systems have varying degrees of precision, can result in rapid prototyping different from the original virtual model, and this could frustrate the user's initial expectations, due to the need of modeling rework. The proper use of these tools can be helpful, since the beginning of the design process, with quick and reliable information, regarding the formal intent of the architect.
keywords	Architectural design; CAD; Early process; Form; Rapid prototyping
series	SIGRADI
email
last changed	2016/03/10 09:55

No more hits.