Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 24

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013r_006
id	ecaade2013r_006
authors	Neto, Pedro L.; Vieira, Andrea P.; Moreira, Bruno; Ribeiro, Lígia
year	2013
title	A blended-learning approach in CAAD. Enhancing an architectural design studio experience by using collaborative web applications.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 83-94
summary	This paper is the result of a research project started in 2007 in our architecture school which aimed to adopt a Blended-Learning approach in teaching CAAD to 3rd year architecture students, while integrating the knowledge produced by our R&D Unit on architectural representation and communication techniques and web applications. We present our main conclusions regarding this strategy’s results and the web applications involved to understand if they acted like catalysts for engaging students with their learning process and for promoting a better communication between them and their teachers. The article shows how this strategy created new forms of interaction making communication between teachers and students easier and giving the latter an active role in the learning process. We start with an introduction to CAAD’s pedagogical strategy; we then describe the strategy and model applied to several case studies and the materials and learning tools used. Finally, we’ll discuss the most significant results and draw the main conclusions. The results highlight how the learning process coming from the Blended-Learning strategy and the use of complementary web applications strengthens the student’s and teacher’s capacity to work in a close relationship while maintaining the student’s active role in the learning process.
keywords	Blended-learning; education in architecture; communication and representation; collaborative teaching and learning; design studio environment
email
last changed	2013/10/07 19:08

_id	sigradi2016_672
id	sigradi2016_672
authors	Bianchi, Alejandra S.; Tripaldi, Gustavo A.; Pintos, Gladis E.; Iturriaga, José R.; Vargas, Sergio D.
year	2016
title	Impacto del mundo digital sobre las representaciones gráficas del dise?o arquitectónico. La experiencia en el Taller Virtual de Arquitectura IV-UPC-UNNE [Digital world impact over the graphics representations of the architectural design. The experience in the virtual workshop of architecture IV-UPC-UNNE]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.123-128
summary	The present work explains the preliminary results of the Research project that the authors are working on to know the way in which the architecture students of the UNNE represent the architectural object with analogues and digital methods. It wants to express the impact of the digital world over the representations through cross sections in five moments of their formation (beginner’s level, first, second, fourth and sixth years) in the school calendars 2013 to 2016. This qualitative research, descriptive and explanatory, expands in the virtual workshop, an innovative and unique experience of a collaborative workshop between the subjects of Architecture IV of different Universities.
keywords	Graphic Representation, Architectural Design, Virtual Workshop
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2013_289
id	sigradi2013_289
authors	Neto de Faria, José; Karine Itao Palos; Katia Akemi Omine
year	2013
title	Projeto Design Condensado: O Design da Experiência Histórica, Produção de Ensaios d Simulações das Relações entre ‘Fatos Históricos’ d ‘Metodologias de Pesquisa dm História’, dom Sistemas de Visualização Dinâmica de Dados [Condensed Design Project: The Design of Historical Experience, Essay Production and Simulation of Relations between ‘Historical Facts’ and ‘Research Methodologies in History’, with a Dynamic Data Visualization System]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 148 - 152
summary	The ‘Condensed Design Project’ aims to discuss and reflect on how the historical experience can be produced, by analyzing and interpreting essays and simulations of the relations between ‘historical events’ and ‘research methodologies in history’, with a dynamic data visualization system. The goal is to understand how the visualization systems can be prepared to support researchers, professor and students to live the historical experience, in order to promote knowledge building processes in design history. It emphasizes history’s concern about bringing back, using the ‘historical sources’ approach, the necessary ‘historical facts’ to describe a certain ‘historical event’.
keywords	Data visualization; Design history; Research methodology; Experience; Knowledge
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	sigradi2013_44
id	sigradi2013_44
authors	Silvano Costa, Márcia; Evangelos D. Christakou; Lenildo S. Da Silva; Antônio A. Nepomuceno
year	2013
title	Identificação de Danos em Fachadas de Edificações: Geração de Mosaicos Fotográficos Obtidos por Plataforma Robótica [Identification of damage on facades of buildings: Generating Mosaics Photographic obtained by Robotics Platform]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 161 - 165
summary	Damage in façades rendering is a problem that has been much discussed currently since such damage is important to the degradation process of building. There are many techniques to verify damages in façades and in other external parts of buildings; however, some techniques have restrictions regarding their practical applications. This work deals with the application of the remote sensing (RM) technique. Such technique derives from the need to identify, locate and scale, quickly, accurately and without human risk, the existing damage or potential damages that may appear in the façades of buildings. Moreover, the RM technique may help to detect damages not visible at long distance or in location of difficult access. This technique is performed by corrected high-resolution panoramic images generated from a mosaic of pictures taken with a standard digital camera coupled in a robotic platform. The Itamaraty Palace, a government building, located in Brasília - DF (Brazil), is the object of the present study. The correction of the Itamaraty Palace panoramic image was carried out so that the identification, quantification and mapping of the Palace façade damages were performed using specific softwares such as GigaPan Stitch, AutoCAD and ArcGIS.
keywords	Pathologies of Buildings; Panoramic Mosaics; Robotics Platform; Photos rectified and ArcGis
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	ecaade2013r_010
id	ecaade2013r_010
authors	Pinto, Guilherme; Vieira, Andrea P.; Neto, Pedro L.
year	2013
title	Parametric urbanism as digital methodology. An urban plan in Beijing
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 121-132
summary	Evolution and innovation in architecture are intensely related to the rise and developments of technology. Within this context, it is possible to recognize how in recent decades this milieu has fostered the development of new methodologies for urban design and architectural practice, as is, for example, the Parameterization. This paper is focused on the subject of Parametric Urbanism: discussing / questioning the emergence of this new architectural methodology; addressing the factors that contributed to its appearance; and seeking to understand whether the parametric approach has benefits and whether it may or may not be a solution or of assistance to urban planning. The paper provides a brief literature review focused on parametric urbanism and then it presents a practical case study of parametric urbanism: an Urban Plan in Beijing, developed in an academic context, at the University École Polytechnique Fédérale de Lausanne in 2012. Having as base diverse examples of parametric urbanism, it is tried to identify/justify decisions defining principles and application guidance for this project. The conclusion presents the final considerations based on opposing the case study with the theoretical approach, seeking to clarify whether this new kind of urban design methodology, Parametric Urbanism, is or not viable.
keywords	Parametric Urbanism; urban design; urban design methods; sustainability urbanism; Parametric digital tools
email
last changed	2013/10/07 19:08

_id	cf2013_096
id	cf2013_096
authors	D´avila Delgado, Juan Manuel and Herm Hofmeyer
year	2013
title	Research Engine: A Tool to Simulate and Study Spatial-Structural Design Processes
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 96-108.
summary	The project’s objective is to study spatial-structural design processes and to support the involved actors; to that end a computational tool so-called Research Engine (RE) has been developed. The RE seeks to fulfill four aims: (1) to study the influence of transformations methods on design instances; (2) to study the influence of transformations methods on the behavior of other transformations methods; (3) to aid in finding “best compromised” or interesting spatial and structural design instances; and (4) to serve as design support tool, providing useful information in early stages of the design process. The paper describes the RE framework and its implementation. Case-studies are presented which showcase the RE’s capabilities and demonstrate that it does fulfill the previously stated aims.
keywords	design process research, design process simulation, spatial design, structural design
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_253
id	ecaade2013_253
authors	Velasco, Rodrigo; Brakke, Aaron and Díaz, César
year	2013
title	Digital Tools and High Performance Architecture
doi	https://doi.org/10.52842/conf.ecaade.2013.1.117
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 117-125
summary	This paper briefly recounts how computational design has surfaced in the architectural discourse during the recent decades, developing into what is now called parametric design. In this context, the authors argue against Parametricism, an avante garde movement which is limited to the issues of style and aesthetic fitness, whilst an approach that uses parametric modelling, simulation and visualization in an iterative way to generate design solutions for complexities of contemporary design problems is favoured. Following a discussion supported by representative examples from current practice, a possible organizational structure more appropriate to take advantage of digital tools to increase design performance is suggested.
wos	WOS:000340635300011
keywords	Performative design; parametric design; design methodologies; design team structure.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2013_62
id	sigradi2013_62
authors	Garcia Alvarado, Rodrigo; Flavio Celis D’Amico; Ernesto Echeverria Valiente; Maureen Trebilcock Kelly; Muriel Diaz; Gerth Wandersleben
year	2013
title	Diseño Integrado para Viviendas de Alto Desempeño (Casa+) [Integrated Design for High Performance Housing (Casa+) ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 629 - 633
summary	The growing environmental constraints encourage new strategies for housing projects. This work exposes the application of energy simulations and integrated design to develop an innovative prefabricated housing system called “Casa +” (House Plus), carried out by an international research team with industrial collaboration. The proposal achieves high density, flexible growth, environmental comfort and minimum fuel consumption, for demonstrate the use of new analysis technologies and design methods to substantially improve residential quality.
keywords	Integrated design, High-performance buildings, Prefabricated construction; Housing; energy simulations
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia14_473
id	acadia14_473
authors	Cutellic, Pierre
year	2014
title	Le Cube d'Après, Integrated Cognition for Iterative and generative Designs.
doi	https://doi.org/10.52842/conf.acadia.2014.473
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 473-478
summary	This paper describes the work in progress of a research on Neurodesign and a previously described process entitled Augmented Iterations [Cutellic and Lotte, 2013]. Within this broader field of research and design explorations, we will focus on describing and comment results obtained in the neuroselection of shapes among a continuously varying flow of visual stimuli. Eventually, these results will lead to the identification of a non-linear and non-convergent potential for the human-based computation of iterative and generative designs.
keywords	Human Computer Interaction, Augmented Iteration, Neurodesign, Generative Design, Integrated Cognition, Evolutionary Computation, Design Computing and Cognition
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	sigradi2013_177
id	sigradi2013_177
authors	Dávila Cordido, Mariolly
year	2013
title	Estudio para la Valoración y Recuperación del Patrimonio Arquitectónico Religioso Venezolano a través de Técnicas Digitales: Iglesia De San Jacinto, Caso De Estudio [Study for Assessment and Recovery of Venezuelan Religious Architectural Heritage Through Digital Techniques: Church of San Jacinto, Case Study]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 177 - 181
summary	The purpose of this paper is to implement a methodology for the recovery of religious architectural heritage of Venezuela, exemplified in a case study: the virtual reconstruction of the church of San Jacinto, located in Caracas. The methodology consists of four stages: two investigative, graphic and informative stage using QR codes. As hypothesis is proposed that, given the limited existing documentation, should supplement the study and lifting Venezuelan Canarian churches with altarpieces and, based on that, characterize and play virtually Venezuelan colonial church model.
keywords	Colonial architecture; Religious heritage; Virtual reconstruction; Visual simulation; QR
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2013_114
id	ecaade2013_114
authors	Lin, Shih-Hsin Eve and Gerber, David
year	2013
title	Evolutionary Energy Performance Feedback for Design (EEPFD)
doi	https://doi.org/10.52842/conf.ecaade.2013.2.175
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 175-184
summary	In order to understand the applicability of multidisciplinary design optimization (MDO) to the building design process, a MDO framework, titled Evolutionary Energy Performance Feedback for Design (EEPFD), along with the prototype tool, H.D.S. Beagle, were developed to support designers with the incorporation of partially automated performance feedback during the early stages of design. This paper presents 2 experimental case studies, one from the design profession and the other from a design studio, that evaluate the applicability and impact of EEPFD on the early stage design process. Through these two case studies two different interaction and automation approaches for applying EEPFD are explored as part of the framework validation. Observed benefits, challenges and suggestions of EEPFD’s implementation are then presented and discussed.
wos	WOS:000340643600017
keywords	Conceptual energy performance feedback; design decision support; performance-based design; multidisciplinary design optimization; genetic algorithm.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2013_275
id	sigradi2013_275
authors	Valdés, Francisco; Andres Cavieres; Russell Gentry
year	2013
title	A Process-Centric Approach for Teaching Digital Fabrication
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 400 - 404
summary	New generation of fabrication machines, such as 3-D printers, do not use “real” materials nor processes generally used in building construction, and so further exacerbate the disconnect between laboratory-based prototyping and full-scale building construction techniques. This research critically reviews the results of a graduate fabrication course from a process-centric standpoint. Students in the course create specification for fabrication and assembly activities through a diagrammatic language that integrates several types of construction knowledge such as design, material properties, machine constraints, and assembly guidelines. This document presents the foundations of the methodology, and discussed the results based on two criteria: Process Modeling and CAD/CAM workflow.
keywords	Process model; CNC, Fabrication, Parametric modeling, CAM
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	sigradi2022_51
id	sigradi2022_51
authors	Varsami, Constantina; Tsamis, Alexandros; Logan, Timothy
year	2022
title	Gaming Engine as a Tool for Designing Smart, Interactive, Light-Sculpting Systems
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 617–628
summary	Even though interactive (Offermans et.al., 2013), adaptive (Viani et.al., 2017), and self-optimizable (Sun et.al., 2020) lighting systems are becoming readily available, designing system automations, and evaluating their impact on user experience significantly challenges designers. In this paper we demonstrate the use of a gaming engine as a platform for designing, simulating, and evaluating autonomous smart lighting behaviors. We establish the Human - Lighting System Interaction Framework, a computational framework for developing a Light Sculpting Engine and for designing occupant-system interactions. Our results include a. a method for combining in real-time lighting IES profiles into a single ‘combined’ profile - b. algorithms that optimize in real-time, lighting configurations - c. direct glare elimination algorithms, and d. system energy use optimization algorithms. Overall, the evolution from designing static building components to designing interactive systems necessitates the reconsideration of methods and tools that allow user experience and system performance to be tuned by design.
keywords	User Experience, Human-Building Interaction, Smart Lighting, Lighting Simulation, Gaming Engine
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ecaade2013_056
id	ecaade2013_056
authors	Fioravanti, Antonio; Avincola, Eolo and Novembri, Gabriele
year	2013
title	Even ‘Clouds’ Can Burn
doi	https://doi.org/10.52842/conf.ecaade.2013.2.029
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 29-37
summary	Architecture, nowadays, is an even more demanding activity in which complexity is the keyword: complex forms, complex functions and complex structures require sophisticated facilities and components, for example, ‘The Cloud’ of D. and M. Fuksas in Rome. These complexities can give rise to numerous risks, among which fire is frequently a central problem. The fire safety norms do not involve an approach integrated with other instruments or building model (BIM), but provide a list of information and constraints. These codes are now shifting away from a prescriptive-based towards a performance-based method due to recent progress in fire safety engineering. Following this approach, a case study simulation of a multi-purpose centre was carried out in Tivoli, near Rome. This simulation allowed greater freedom in architectural composition, a lower risk to people, a larger number of material and building components used and higher safety standards to be achieved. The model is based on the FDS (Fire Dynamics Simulator) language, a simulation code for low-speed flows, focused on smoke, particle and heat transport by fire.
wos	WOS:000340643600002
keywords	Architectural design; computational fluid-dynamics; fire propagation; fire safety; smoke propagation.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2013_42
id	sigradi2013_42
authors	Kotsopoulos, Sotirios D.; François Guermeur; Federico Casalegno
year	2013
title	Using Computational Fluid Dynamics to Assess Natural Airflow in a Prototype House-Interior
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 373 - 377
summary	This paper presents an airflow study with Computational Fluid Dynamic (CFD) software that was used to model the natural ventilation attributes at the interior of a prototype house. This study informed the design development phase of the house and guided the design of a dynamic curtain wall involving a matrix of 3 x 9 openable windows for its south façade. Alternative ways of modeling the building geometry were employed and different possible states of the house were examined to determine how change in the orientation and the basic dimensions of the envelope, and modifications in the number, distribution and angle of the open windows affect natural ventilation.
keywords	Performance-based design; Airflow; Computational fluid dynamics; Simulation
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	ijac201310203
id	ijac201310203
authors	Kotsopoulos, Sotirios D.; Wesley Graybill, Federico Casalegno
year	2013
title	Designing A Connected Sustainable Living Environment
source	International Journal of Architectural Computing vol. 11 - no. 2, 183-204
summary	This paper presents the design and development of a prototype, connected to a sustainable home project, which is at its final stage of implementation in Trento, N. Italy. The paper specifically focuses on the design ends and the technological means deployed in the process of implementing the prototype. Design ends outline the technical premises underpinning the development of the house systems. Technological means refer to the methods and technologies that had been deployed to satisfy the premises. Emphasis is given to the properties of the reconfigurable façade and the autonomous control system of the house, where variable transmittance materials, AI methods for building control and digital simulation are used in combination.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2014_159
id	ecaade2014_159
authors	Leyla Yunis, Ond_ej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn and Achim Menges
year	2014
title	Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architecture
doi	https://doi.org/10.52842/conf.ecaade.2014.1.423
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 423-432
summary	Research pavilions can serve as architectural scale demonstrations for the materialization of experimental forms and structures. Pavilions seek to prove and change methods of design and construction mechanisms in order to achieve desires such as material efficiency, novel spatial qualities and performative needs. The case of the ICD/ITKE Research Pavilion 2013-14 highlights the use of fiber composites in order to achieve a core-less filament winding modular system from bio-inspired lightweight structures through robotic fabrication. This paper describes the multi-disciplinary design and construction process of this pavilion that created a structure of out 36 unique components.
wos	WOS:000361384700042
keywords	Bio-inspired; fiber composites; multi-disciplinary design; robotic fabrication; modular system construction
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia14_219
id	acadia14_219
authors	Moritz Dörstelmann, Moritz; Prado, Marshall; Parascho, Stefana; Knippers, Jan; Menges, Achim
year	2014
title	Integrative computational design methodologies for modular architectural fiber composite morphologies
doi	https://doi.org/10.52842/conf.acadia.2014.219
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 219-228
summary	This paper describes how computational design methodologies can serve as an integrative tool within a multidisciplinary design project. The topic is discussed based on the design and fabrication process for modular architectural fiber composite morphologies applied and developed in the ICD/ITKE Research Pavilion 2013-14.
keywords	integrative computational design, digital fabrication and construction, robotic fabrication reinforced fiber composite structures, biomimicry and biological models in design, light-weight construction, multidisciplinary design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

For more results click below: