Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 609

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_202
id	caadria2013_202
authors	Dai, Qun and Marc Aurel Schnabel
year	2013
title	Pedestrian Thermal Comfort in Relation to Street Zones with Different Orientations – A Pilot-Study of Rotterdam
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 219-228
doi	https://doi.org/10.52842/conf.caadria.2013.219
wos	WOS:000351496100022
summary	This paper presents the impacts of different street orientations and street zones of a typical Dutch residential area on micro-scale human thermal comfort. The spatial and temporal variation of mean radiant temperature (T mrt ) of a typical summer day in Rotterdam, The Netherlands, is simulated by using an established long- and short-wave 3D radiation fluxes model (SOLWEIG). This model calculates human radiation load and expresses this as a T mrt . Hereby we simulate and analyse the T mrt variations for three zones of a street consisting of a centre area for cars and the adjacent pedestrian zones for pedestrians and bicycles. The streets are azimuth rotated. The simulation and analysis results show various T mrt patterns of the three zones in the different orientations at different periods during daytime. We show that the spatial distribution of T mrt at street level strongly depends on street orientation and street zone. This is crucial since optimizing street configuration will directly influence the human thermal comfort in relation to street orientation and street zone. Finally we present a time adjusted framework of thermal comfort and classify the various T mrt for each zone and orientation.
keywords	Thermal comfort, Street orientation, Street zone, Mean radiant temperature (T mrt ), Solweig
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_31
id	sigradi2013_31
authors	Portillo, Juan Pablo
year	2013
title	BIM enclosures, una aplicación para cálculos térmicos en cerramientos [BIM Enclosures, an Application for Thermal Calculations in Enclosures]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 279 - 283
summary	The BIM software (Building Information Modeling) enables a holistic model -a complete description of the model-building for a complete analysis and validation prior to build, as well as the plotting of final design in architecture and its subsequent maintenance. Users can extend virtually unlimited capabilities. For this reason we have chosen a BIM with programmability by the user to create a calculation module to validate, the heat transfer and possible condensation on both walls and ceilings. The Revit Architecture BIM was chosen using the API (application programming interface) in C#. In this paper, we analyze the experience gained and the results achieved. The objective is to create a calculation and graphing module thermal transmission and condensation.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	sigradi2013_44
id	sigradi2013_44
authors	Silvano Costa, Márcia; Evangelos D. Christakou; Lenildo S. Da Silva; Antônio A. Nepomuceno
year	2013
title	Identificação de Danos em Fachadas de Edificações: Geração de Mosaicos Fotográficos Obtidos por Plataforma Robótica [Identification of damage on facades of buildings: Generating Mosaics Photographic obtained by Robotics Platform]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 161 - 165
summary	Damage in façades rendering is a problem that has been much discussed currently since such damage is important to the degradation process of building. There are many techniques to verify damages in façades and in other external parts of buildings; however, some techniques have restrictions regarding their practical applications. This work deals with the application of the remote sensing (RM) technique. Such technique derives from the need to identify, locate and scale, quickly, accurately and without human risk, the existing damage or potential damages that may appear in the façades of buildings. Moreover, the RM technique may help to detect damages not visible at long distance or in location of difficult access. This technique is performed by corrected high-resolution panoramic images generated from a mosaic of pictures taken with a standard digital camera coupled in a robotic platform. The Itamaraty Palace, a government building, located in Brasília - DF (Brazil), is the object of the present study. The correction of the Itamaraty Palace panoramic image was carried out so that the identification, quantification and mapping of the Palace façade damages were performed using specific softwares such as GigaPan Stitch, AutoCAD and ArcGIS.
keywords	Pathologies of Buildings; Panoramic Mosaics; Robotics Platform; Photos rectified and ArcGis
series	SIGRADI
email
last changed	2016/03/10 10:00

_id	caadria2013_015
id	caadria2013_015
authors	Dritsas, Stylianos and Kang Shua Yeo
year	2013
title	Undrawable Architecture – Digital Workflows for the Conservation of Heritage Buildings and the Discovery of Digital Tectonic
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 833-842
doi	https://doi.org/10.52842/conf.caadria.2013.833
wos	WOS:000351496100086
summary	This paper presents a datacentric perspective to historical building conservation using digital media. In particular we explore a workflow based on large volumes digital data acquired via 3D scanning technology, virtual restoration using 3D modelling and physical artefact reconstruction using 3D printing technology. We offer an alternative perspective in contrast to the prevalent approach of reverse engineering or geometric rationalization via parametric design technology; highlight the research and design opportunities as well as the challenges of the approach.
keywords	Digital conservation, 3D scanning, Rapid prototyping
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia13_071
id	acadia13_071
authors	Burry, Jane; Salim, Flora; Williams, Mani; Anton Nielsen, Stig; Pena de Leon, Alex; Sharaidin, Kamil; Burry, Mark
year	2013
title	Understanding Heat Transfer Performance for Designing Better Façades
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 71-78
doi	https://doi.org/10.52842/conf.acadia.2013.071
summary	This early research focuses on the design of building façades to mediate external and internal thermal conditions. It explores new workflow for accessible feedback into the early design of façade systems. Specifically, this research aims to explore the level of corroboration or the gap between predictions of thermal behavior using digital modeling and simulation, and the empirical measurement of thermal behavior in physical analog models for façade design.
keywords	Tools and Interfaces: façade design, heat transfer, performance-based design, simulation, data visualization.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2013_001
id	caadria2013_001
authors	Doelling, Max C. and Ben Jastram
year	2013
title	Daylight Prototypes: From Simulation Data to Four-Dimensional Artefact-Physical Metrics Models in Sustainable Design Education
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 159-168
doi	https://doi.org/10.52842/conf.caadria.2013.159
wos	WOS:000351496100016
summary	The increasing use of building performance simulation in architectural design enriches digital models and derived prototyping geometries with performance data that makes them analytically powerful artefacts serving sustainable design. In our class “Parametric Design”, students perform concurrent thermal and daylight optimization during the architectural ideation process, employing digital simulation tools, and also utilize rapid prototyping techniques to produce process artefacts and whole-building analysis models with climate-based day-light metrics physically embedded. Simulation metrics are merged with prototyping geometries to be output on a colour-capable Zprinter; the resultant hybrid artefacts simultaneously allow three-dimensional formal as well as whole-year daylight performance evaluation, rendering analysis scope four-dimensional. They embody a specific epistemological type that we compare to other model instances and posit to be an example of multivalent representation, a formal class that aids knowledge accretion in workflows and allows designers to gain a physically reframed understanding of geometry-performance relationships.
keywords	Rapid prototyping, Building performance modelling, Daylight simulation, Physical data models, Design representation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_032
id	ecaade2013_032
authors	Foged, Isak Worre
year	2013
title	Architectural Thermal Forms
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 99-105
doi	https://doi.org/10.52842/conf.ecaade.2013.2.099
wos	WOS:000340643600009
summary	The paper presents a developed method and algorithm to create environmental sustainable optimised forms based on the solar energy received in relation to receiving, containing and distributing energy. Different studies are created based upon this approach, to which forms are evaluated against conventional building geometries. The work shows a significant improvement on several aspects of environmental performance. Lastly the work presents an idea of maximum structures, rather than minimum structures as a path in future research work.
keywords	Sustainable environmental architecture; performative generative algorithms; simulation; material distribution.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2013_129
id	ecaade2013_129
authors	Janusz, Jan
year	2013
title	Learning from Parametric Manipulation of Architectural Volume
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 91-100
doi	https://doi.org/10.52842/conf.ecaade.2013.1.091
wos	WOS:000340635300008
summary	This study is concerned with the building thermal performance education in the context of computer application. The project contains the original script coded in Maxscript for use in Autodesk 3ds Max. The tool workflow and functionality focus on the thermal calculations connected with sculpturing manipulation of architectural volume in pre-conception project stages, when detailed project solutions are undefined. The algorithm is based on the manual methods included in the curriculum. The paper also presents a study of software analyzing thermal performance as a justification for the script vision and educational implementation. The script is rather an addition than alternative for existing software, so it does not assume any resignation from more sophisticated products.
keywords	Parametric design; thermal optimization; sustainable design education; Maxscript; energy estimation.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2013_195
id	caadria2013_195
authors	Park, Jihyun; Azizan Aziz, Kevin Li and Carl Covington
year	2013
title	Energy Performance Modeling of an Office Building and Its Evaluation – Post-Occupancy Evaluation and Energy Efficiency of the Building
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2013.209
wos	WOS:000351496100021
summary	Energy performance modelling can provide insights into the efficiency and sustainability of commercial buildings, and also the achievement of certification standards such as USGBC LEED. However, the results from the modelling must be validated via a post-construction evaluation, which quantifies any discrepancies between the predicted energy usage and the actual energy consumed. In this study, an existing office building was examined to test how well the model predicts energy usage. The results from the model were compared with the actual usage of gas and electricity over two years (2010-2011). Our study showed a 123% higher gas usage,and a 36% lower electricity, compared with the simulation. This difference presents that occupant behaviour and building construction practices have significant impact on the energy usage of a building. For instance, the large discrepancy among gas usage is due to the office building’s thermal envelope, which identifies the spots at which heat leaks out of the building, thereby forcing the heating unit to work more. Additionally, the post occupancy evaluation study identified that indoor environmental conditions impact on energy consumption of the building.
keywords	Building performance evaluation, Energy modelling, Energy usage, User behaviour, Post occupancy evaluation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2013_234
id	ecaade2013_234
authors	Turrin, Michela; Chatzikonstantinou, Ioannis; Tenpierik, Martin and Sariyildiz, Sevil
year	2013
title	Engineering Performance Simulations in Architectural Design Conception
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 137-146
doi	https://doi.org/10.52842/conf.ecaade.2013.2.137
wos	WOS:000340643600013
summary	The paper tackles the integration of engineering performance simulations in the conceptual phase of architectural design, with specific focus on parametric design processes. A general framework is exemplified, in which the use of performance simulations and the learning process of the designer are discussed in relation to the parameterization process. A specific case study is presented more in details regarding the design of an atrium for the reuse of an existing building in Shenyang-China. Performance simulations concerning the thermal comfort in the atrium are presented and discussed in relation to the general framework.
keywords	Conceptual design; building simulation tools.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2013_42
id	sigradi2013_42
authors	Kotsopoulos, Sotirios D.; François Guermeur; Federico Casalegno
year	2013
title	Using Computational Fluid Dynamics to Assess Natural Airflow in a Prototype House-Interior
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 373 - 377
summary	This paper presents an airflow study with Computational Fluid Dynamic (CFD) software that was used to model the natural ventilation attributes at the interior of a prototype house. This study informed the design development phase of the house and guided the design of a dynamic curtain wall involving a matrix of 3 x 9 openable windows for its south façade. Alternative ways of modeling the building geometry were employed and different possible states of the house were examined to determine how change in the orientation and the basic dimensions of the envelope, and modifications in the number, distribution and angle of the open windows affect natural ventilation.
keywords	Performance-based design; Airflow; Computational fluid dynamics; Simulation
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	caadria2013_033
id	caadria2013_033
authors	Nguyen, Danny D. and M. Hank Haeusler
year	2013
title	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 365-373
doi	https://doi.org/10.52842/conf.caadria.2013.365
wos	WOS:000351496100036
summary	Assimilating Interactive Technology into Architectural Design – A Quest for developing an ‘Architectural Drawing’ for Urban Interaction Design as a Communication Platform Through Combining Physical Sensing Devices with Simulation Software The research presented in this paper investigates the need for an equivalent of architectural drawings for urban interaction design in an architectural scale in order to communicate interaction design intentions to design participants and clients through using state of the art computer, gaming and sensor technologies. The paper discusses two projects (a) Blur Building, as a large scale interaction design project executed through an experienced team and (b) presents as student design project coordinated by the researchers as a reference project. Both projects in this paper are discussed and evaluated from an Urban Interaction Design point of view. This paper emphasizes the significance for establishing ‘drawing’ equivalents for urban interaction design, discussing representation of ideas in architectural design; followed by outlining existing methods of interactive design representation, such as storyboards to then introduce current advancements in gaming environments. The following paper introduces a framework for future research projects that will design, deploy and evaluate of prototypes as a communication platform combining physical sensing devices in combination with gaming engines to enable a digital / physical hybrid. This would allow designers and clients to test, evaluate and improve urban interactions in a design phase prior to completing the project.
keywords	Spatial design, Human-computing interfacing, Interactive architecture, Smart environments, Sensor technology
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2013_160
id	caadria2013_160
authors	Brennan, AnnMarie; Suleiman Alhadidi and Geoff Kimm
year	2013
title	Quokka: Programming for Real Time Digital Design Platform
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 261-270
doi	https://doi.org/10.52842/conf.caadria.2013.261
wos	WOS:000351496100026
summary	This paper introduces an interactive 3D scanning tool (Quokka) that generates real time point clouds and surfaces in a design program (Rhinoceros). It explains the use of this tool through a detailed experiment, suggesting a new mode of design using a dynamic, three-dimensional grid.
keywords	Real time design, Real time feedback, Interface, Quokka, Re-constructing surfaces, Dynamic point cloud
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_189
id	sigradi2013_189
authors	Bruscato, Underléa; Clariana Fischer Brendler; Felipe Schneider Viaro; Fábio Gonçalves Teixeira; Régio Pierre da Silva
year	2013
title	Uso da Fabricação Digital e Prototipagem no Desenvolvimento do Projeto de Produto: Análises do Produto através de Simulações Digitais [Digital Manufacture and Rapid Prototyping in Product Design Development: Product Analysis through Digital Simulation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 459 - 463
summary	The aim of this paper is to design a public facilitie using both digital manufacture and rapid prototyping design methods. These new technologies have been used in product design development by some ways: helping in the comprehension of complex geometries; used as tools for analyzing the design process, thus avoiding errors in the project. The analysis were carried out using virtual simulation tests and physical prototype in reduced scale. The prototype was manufactured using the 3D printer V-Flash in the Virtual Design Laboratory – UFRGS, where positive and negatives aspects were identified and described.
keywords	Digital manufacture; Rapid prototyping; Virtual simulation; Product design; Urban facilities
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_285
id	sigradi2013_285
authors	Caldera, Sebastián; Gonzalo Silva; Mauricio Loyola
year	2013
title	Uso de Herramientas Paramétricas de Optimización Evolutiva y Simulación Energética en el Diseño Basado en Performance [Using Evolutionary Optimization and Energy Simulation Tools in Performance-based Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 343 - 347
summary	This article describes three cases of integration of technologies of evolutionary optimization and energy simulation in performance-based design. The aim is to share the details of the process of creation, validation and use of the various techniques and tools, with an emphasis on the mistakes and successes obtained, so that experiences can be useful for non-specialist users interested in working with these methodologies.
keywords	Parametric design; Grasshopper 3D; Ecotect; GECO; Galápagos
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

_id	caadria2013_148
id	caadria2013_148
authors	Coutinho, Filipe; Eduardo Castro e Costa, José P. Duarte and Mário Kruger
year	2013
title	A Shape Grammar to Generate Loggia Rucellai
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 791-800
doi	https://doi.org/10.52842/conf.caadria.2013.791
wos	WOS:000351496100082
summary	This article shows the result of generating a 3d model of Loggia Rucellai in Florence using a shape grammar from Leon Batista Alberti’s treatise De Re Aedificatoria and it is a test bed for further generations of buildings using Alberti’s rules. It shows the accuracy of such grammar to help tracing the degree of influence of Alberti’s treatise in Renaissence Portuguese architecture. Rucellai palace facade ornaments and its interior loggia where used to analyze and compare the Loggia generation accuracy. A Grasshopper script is used for the automation of the rules derivation. An evaluation process is presented and its use aims to better understand the deviations between the treatise and the Loggia grammars.
keywords	lberti, Shape grammars, Transformations in design, Grammar evaluation, Digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia20_688
id	acadia20_688
authors	del Campo, Matias; Carlson, Alexandra; Manninger, Sandra
year	2020
title	3D Graph Convolutional Neural Networks in Architecture Design
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 688-696.
doi	https://doi.org/10.52842/conf.acadia.2020.1.688
summary	The nature of the architectural design process can be described along the lines of the following representational devices: the plan and the model. Plans can be considered one of the oldest methods to represent spatial and aesthetic information in an abstract, 2D space. However, to be used in the design process of 3D architectural solutions, these representations are inherently limited by the loss of rich information that occurs when compressing the three-dimensional world into a two-dimensional representation. During the first Digital Turn (Carpo 2013), the sheer amount and availability of models increased dramatically, as it became viable to create vast amounts of model variations to explore project alternatives among a much larger range of different physical and creative dimensions. 3D models show how the design object appears in real life, and can include a wider array of object information that is more easily understandable by nonexperts, as exemplified in techniques such as building information modeling and parametric modeling. Therefore, the ground condition of this paper considers that the inherent nature of architectural design and sensibility lies in the negotiation of 3D space coupled with the organization of voids and spatial components resulting in spatial sequences based on programmatic relationships, resulting in an assemblage (DeLanda 2016). These conditions constitute objects representing a material culture (the built environment) embedded in a symbolic and aesthetic culture (DeLanda 2016) that is created by the designer and captures their sensibilities.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2013_101
id	ecaade2013_101
authors	Fukuda, Tomohiro and Taguchi, Masaharu
year	2013
title	Feature of Users’ Eye Movements during a Distributed and Synchronised VR Meeting using Cloud Computing
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 219-226
doi	https://doi.org/10.52842/conf.ecaade.2013.1.219
wos	WOS:000340635300022
summary	Owing to cloud computing Virtual Reality (cloud-VR), a note PC or tablet with no need for a high spec GPU can be used for sharing a 3D virtual space in a synchronous distributed type design meeting. This research investigates the users’ eye movements and optimization of the GUI of cloud-VR during a distributed and synchronized VR meeting. Firstly, a townscape design support system based on cloud-VR was constructed. Then, a 30-minute experiment was executed with eight subjects who wore an eye-tracking system. In conclusion, it was effective to use the eye-tracking system because meeting participants could discuss while confirming each other’s eye direction in an actual distributed and synchronized VR meeting. In scenes where a reviewer listened to a presenter’s explanation, the tendency to look at VR contents other than operation commands was observed. On the other hand, the tendency to look at operation commands about viewpoints, such as “walk-through” and “jump” to an important viewpoint location, was observed in scenes about which a reviewer argued with a presenter.
keywords	Spatial design; distributed synchronization; cloud computing; cognitive analysis; eye-tracking.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: