Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 609

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2013_198
id	caadria2013_198
authors	Chee Zong Jie and Patrick Janssen
year	2013
title	Exploration of Urban Street Patterns – Multi-Criteria Evolutionary Optimisation Using Axial Line Analysis
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 695-704
doi	https://doi.org/10.52842/conf.caadria.2013.695
wos	WOS:000351496100068
summary	In urban design, researchers have developed techniques to automate both the generation and evaluation of urban street patterns. In most cases, these approaches are investigated in isolation from one another. Recently, a number of researchers have attempted to couple these approaches, in order to enable larger numbers of street patterns to be generated and evaluated in an iterative loop. However, to date, the possibility of fully automating the generative-evaluative loop using optimisation algorithms has not been explored. This research proposes an explorative design method in which urban street patterns can be optimised for multiple conflicting performance criteria. The optimisation process uses evolutionary algorithms to evolve populations of design variants by iteratively applying three key procedures: development, evaluation, and feedback. For development, a generative technique is proposed for constructing street patterns. For evaluation, various performance measures are used, including in particular Space Syntax based Axial Line analysis. For feedback, a Pareto-ranking algorithm is used that ranks street patterns according to multiple criteria. The proposed method is demonstrated using an abstract scenario in which orthogonal street patterns are evolved for a small urban area.
keywords	Axial line analysis, Generative modelling, Evolutionary algorithms, Decision chain encoding, Urban street patterns
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2013_028
id	ecaade2013_028
authors	Fricker, Pia; Girot, Christophe and Munkel, Georg
year	2013
title	How to Teach ‘New Tools’ in Landscape Architecture in the Digital Overload
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 545-553
doi	https://doi.org/10.52842/conf.ecaade.2013.2.545
wos	WOS:000340643600055
summary	The central theme of the paper is the introduction of hands-on tools showing the integration of information technology within a postgraduate study program (MAS LA) for landscape architects. What has already become a part of the discourse in the field of architecture – generic design – is now also finding more resonance in the context of large-scale landscape architectural design. If one studies the educational backgrounds of landscape architects, however, they often do not match the same standard as those of architects. A solid background in the area of innovative use of information technology, especially computer-assisted design and CAD/CAM construction is only at a preliminary state at most universities. The critical arguments in the choice of the selected medium and the building up of a continuous digital chain stand here in the forefront. The aim is not to improve the quality of the landscape design based on the variety of the applied tools, but rather through the sensible use of the said. Reflections as well as questions of method and theory stand at the forefront of our efforts.
keywords	Design tool development; computational design research and teaching; new design concepts and strategies; parametric and evolutionary design.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2013_267
id	cf2013_267
authors	Kim, Kyoung-Hee and Seung-Hoon Han
year	2013
title	Integrated Design Process: Sustainable Fa¸cade Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 267-273.
summary	Interoperability and integration between design, analysis and fabrication in architectural practice allow building façade systems to be increasingly complex and non-standard. As customized building façade systems increase in contemporary buildings, it is important to adopt the integrated design process that aids problem solving and design-making in façade design. The primary goal of this study is to explore the integrated design process that incorporates building information modeling and parametric performance analysis tools in order to understand sustainability opportunities in sustainable façade fabrication. The integration of building information modeling (BIM) and parametric performance analysis tools poses a unique design process whose resolution has the potential to improve sustainability in built environment and façade fabrication efficiency. This paper uses an academic design research project, the Reading Pavilion located in the UNC Charlotte campus, as a case study to investigate the integrated design process of a building façade system, which was supported by quantitative data using BIM, parametric performance analysis, and rapid prototyping tools.
keywords	Integrated design process, building information modeling, parametric performance analysis, high performance façade.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2013_180
id	ecaade2013_180
authors	Mueller, Volker and Strobbe, Tiemen
year	2013
title	Cloud-Based Design Analysis and Optimization Framework
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 185-194
doi	https://doi.org/10.52842/conf.ecaade.2013.2.185
wos	WOS:000340643600018
summary	Integration of analysis into early design phases in support of improved building performance has become increasingly important. It is considered a required response to demands on contemporary building design to meet environmental concerns. The goal is to assist designers in their decision making throughout the design of a building but with growing focus on the earlier phases in design during which design changes consume less effort than similar changes would in later design phases or during construction and occupation.Multi-disciplinary optimization has the potential of providing design teams with information about the potential trade-offs between various goals, some of which may be in conflict with each other. A commonly used class of optimization algorithms is the class of genetic algorithms which mimic the evolutionary process. For effective parallelization of the cascading processes occurring in the application of genetic algorithms in multi-disciplinary optimization we propose a cloud implementation and describe its architecture designed to handle the cascading tasks as efficiently as possible.
keywords	Cloud computing; design analysis; optimization; generative design; building performance.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2013_173
id	caadria2013_173
authors	Mueller, Volker; Drury B. Crawley and Xun Zhou
year	2013
title	Prototype Implementation of a Loosely Coupled Design Performance Optimisation Framework
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 675-684
doi	https://doi.org/10.52842/conf.caadria.2013.675
wos	WOS:000351496100066
summary	Integration of analyses into early design phases poses several challenges. An experimental implementation of an analysis framework in conjunction with an optimization framework ties authoring and analysis tools together under one umbrella. As a prototype it served intensive use-testing in the context of the SmartGeometry 2012 workshop in Troy, NY. In this prototype the data flow uses a mix of proprietary and publicised file formats, exchanged through publicly accessible interfaces. The analysis framework brokers between the parametric authoring tool and the analysis tools. The optimization framework controls the processes between the authoring tool and parametric engine on one side and the optimization algorithm on the other. In addition to some user-implemented analyses inside the parametric design model the prototype makes energy analysis and structural analysis available. The prototype allows testing assumptions about work flow, implementation, usability and general feasibility of the pursued approach.
keywords	Design-analysis integration, Design refinement, Optimization
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2013_039
id	ecaade2013_039
authors	Papadonikolaki, Eleni; Koutamanis, Alexander and Wamelink, J. W. F. (Hans)
year	2013
title	Attaining Performance with Building Information Modelling
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 475-483
doi	https://doi.org/10.52842/conf.ecaade.2013.2.475
wos	WOS:000340643600048
summary	The paper presents the findings of a systematic literature review of approximately 200 scientific sources. It is designed with the aim to identify the current benefits and factors of high performance in Architecture, Engineering, Construction (AEC) since the introduction of Building Information Modelling (BIM). We formed and confirmed two main propositions associating the performance of the AEC to the use of BIM. The mapping of the current impact and benefits of BIM showed that the role of the managers, suppliers, owners and authorities is underestimated, as well as the initiation and use stage of project development. At the same time, the performance in the AEC industry can be improved by an array of possibilities where IT research and policy-making authorities contribute – from establishing new collaboration protocols until improving existing or creating new BIM tools.
keywords	Building Information Modelling (BIM); Architecture, Engineering and Construction (AEC); supply chain management; life-cycle phases; stakeholders.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2013_015
id	ecaade2013_015
authors	Roman, Miro
year	2013
title	Four Chairs and All the Others - Eigenchair
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 405-414
doi	https://doi.org/10.52842/conf.ecaade.2013.2.405
wos	WOS:000340643600041
summary	By contemplating on the Eigenchair project, we ponder upon strategies and concepts of designing by using information technologies. What are the potentials of data driven design? What happens with objects when they are abstracted and reduced to a set of data? The emphasis is no longer on the creation of physical objects, but on conceiving meta-objects in the possibility space. Furthermore, this enables us to manipulate with a whole population of objects, instead of a single object. How do we get this abstract system to relate to the real world? Information technologies have opened up a number of new ways of thinking about the world and the object and they, by far, surpassed the formally simplified expression in design and architecture. Based on intellectual heritage of history and culture, information technologies can, by utilizing and recycling various elements and information, explore the 21st century object.
keywords	Eigenchair; eigenvector; Principal Component Analysis; data; indexing.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_253
id	ecaadesigradi2019_253
authors	Velandia Rayo, Diego Alejandro
year	2019
title	Option One-second Iteration - Analysis, evaluation and redesign of a rural housing prototype
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 187-194
doi	https://doi.org/10.52842/conf.ecaade.2019.1.187
summary	In 2005, the rural housing deficit in Colombia was 1,600,000 units, which is equivalent to 68.25% of the total households. This very high number shows the difficulties faced by public policies on rural housing. This deficit is partly due to logistical problems related to the supply of materials and complexity in construction processes. It is necessary to explore new alternatives to offer more and better homes at lower costs. The research project presented in this manuscript started in 2013 as an initiative to reduce the housing deficit. It proposed to build a rural housing prototype integrating digital manufacturing processes. The performance of part of the structural and enclosing system was evaluated during a first iteration process to include changes in a second iteration later. With the adjustments to the design process discussed here, the prototype is expected to be built and tested to measure its efficiency and functioning.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ijac201310105
id	ijac201310105
authors	Agkathidis, Asterios and Andre_ Brown
year	2013
title	Tree-Structure Canopy:A Case Study in Design and Fabrication of Complex Steel Structures using Digital Tools
source	International Journal of Architectural Computing vol. 11 - no. 1, 87-104
summary	This paper describes and reflects on the design and manufacturing process of the Tree-Structure canopy for the WestendGate Tower in Frankfurt upon Main, completed early 2011.The project investigated fabrication and assembly principles of complex steel structures as well as the integration of contemporary computational design, engineering, optimization and simulation techniques in a collaborative design approach. This paper focuses on the notion of modular standardization as opposed to non standard customized components. It also engages with issues relating to digital production tools and their impact on construction cost, material performance and tolerances. In addition it examines the reconfiguration of liability during a planning and construction process, an aspect which can be strongly determined by fabrication companies rather than the architect or designer.This paper is written as a reflection on the complete building process when contemporary digital tools are used from design through to fabrication. It studies both the generation of the steel structure as well the ETFE cushion skin. It reports on a collaborative project, where the main author was responsible for the canopies design, parameterization, digitalization and fabrication, as well as for the dissemination of the outcomes and findings during the design and realization process.As such it represents an example of research through design in a contemporary and evolving field.The canopy received a design award by the Hellenic Architecture Association.
series	journal
last changed	2019/05/24 09:55

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	sigradi2013_101
id	sigradi2013_101
authors	Alves, Gilfranco; Anja Pratschke
year	2013
title	Processos de Projeto Cibersemióticos: Procedimentos de Observação, Representação e Performance Aplicados ao Design Paramétrico [Cybersemiotic Design Processes: Observation, Representation and Performance Proceedings Applied on Parametric Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 258 - 261
summary	The abstract presented here is part of a PhD research in progress, currently developed at USP - University of São Paulo, with the Nomads.usp research group, under the guidance of Professor Anja Pratschke. This research starts from the assumption that Cybersemiotics, initially defined by the Philosopher and Information Scientist Dr. Søren Brier - and therefore gathers concepts of Second Order Cybernetics and Semiotics of Charles Sanders Peirce - while meta-theory designed and developed to promote transdisciplinarity, can bring other perspectives and base updated reflections in order to produce a framework for architectural design processes that make use of digital mediation, especially Parametric Design.
keywords	Cybersemiotics; Cybernetics; Peircean semiotics; Performance; Parametric design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_249
id	ecaade2013_249
authors	Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year	2013
title	Bioinformed Performative Composite Structures
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
doi	https://doi.org/10.52842/conf.ecaade.2013.1.575
wos	WOS:000340635300060
summary	This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
keywords	Bioinformed; multi-material; composite; parametrics; performative design.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_003
id	ecaade2013_003
authors	Attia, Shady
year	2013
title	Achieving Informed Decision-Making using Building Performance Simulation
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2013.1.021
wos	WOS:000340635300001
summary	Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the effect of a simulation-based decision aid, ZEBO, on informed decision-making using sensitivity analysis. The objective is to assess the effect of ZEBO and other building performance simulation (BPS) tools on three specific outcomes: (i) knowledge and satisfaction when using simulation for NZEB design; (ii) users’ decision-making attitudes and patterns, and (iii) performance robustness based on an energy analysis. The paper utilizes three design case studies comprising a framework to test the use of BPS tools. The paper provides results that shed light on the effectiveness of sensitivity analysis as an approach for informing the design decisions of NZEBs.
keywords	Decision support; early stage; design; simulation; architects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_390
id	sigradi2013_390
authors	Banda, Pablo; Juan Eduardo Subercaseaux
year	2013
title	Meta-patrones Morfogenéticos: Propuesta de Framework para Arquitecturas Generativas Basadas en Desempeño [Morphogenetic Meta-Patterns: A framework proposal for Performance-Generated Architectures]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 253 - 257
summary	Architecture and Technology’s relationship nowadays has arrived to multi-disciplinary practices; they are growing exponentially while keeping away from to architectural discourse, are remarkable for its expressive power and the ability to solve complex problems. This opens the possibility for the generation of the organic, a path discarded by the Modern Movement in the past.Our approach explores three active premises called Morphogenetic Meta-Patterns: discrete processes (systemic guidelines) for the development of performance-based generative systems. These processes arise from Generative Design and their associated paradigms in the creation of a Framework between architecture and related disciplines.
keywords	Design of parametric systems; Part-to-whole debate; Generative design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_113
id	ecaade2013_113
authors	Becker, Mirco and Rumpf, Moritz
year	2013
title	Heat-Pressure Lamination
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 643-651
doi	https://doi.org/10.52842/conf.ecaade.2013.1.643
wos	WOS:000340635300067
summary	Fabrication techniques and design potential of up-cycling plastic bags by heat-pressure lamination are explored. The material properties are tested and put into a digital design system. The main performance criteria is structure. Two design prototypes are being discussed. The first one is using a set of modular molds and a second one a techniques of inflated cushions resulting in shapes closely matching these in curved folding.
keywords	Digital-low-tech; fabrication; up-cycling; structural analysis; curved folding; design exploration.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2013_036
id	ecaade2013_036
authors	Bernhard, Mathias
year	2013
title	Frequency Analysis of Wood Textures
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 597-603
doi	https://doi.org/10.52842/conf.ecaade.2013.1.597
wos	WOS:000340635300062
summary	“Frequency analysis of wood textures” presents the application of Fourier analysis to translate images of wood textures to the frequency domain. With this encoding, a lot more details can be captured by the same amount of data points than with other descriptions in the spatial domain. A small set of overlapping waves with different frequencies, magnitudes and phase angles allows to characterize the main features of the wood’s grain texture and to quantify and classify different samples. The sample’s color information is thereby enhanced with an array of direction vectors, describing the local orientation distribution.
keywords	Wood; Fourier analysis; pattern recognition; information theory.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_103
id	ecaade2013_103
authors	Boeykens, Stefan; De Somer, Pauline; Klein, Ralf and Saey, Rik
year	2013
title	Experiencing BIM Collaboration in Education
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 505-513
doi	https://doi.org/10.52842/conf.ecaade.2013.2.505
wos	WOS:000340643600051
summary	In a context of a slow uptake of the Building Information Modeling (BIM) methodology in the Flemish region, we present the results of an educational research project, carried out over 4 semesters, in a multi-disciplinary, cross-campus collaboration. This project fosters an improved application of BIM, information management and communication, by organizing building teams involving students from different schools.The project partners collaborated on a shared framework of supportive learning material, collaboration scenarios between teams of students and the integration of digital tools for communication, information management and collaboration in the curriculum.This article, in particular, will elaborate on one of the collaborative exercises, involving architecture and engineering students, using BIM for modeling, information exchange and model evaluation.
keywords	BIM; education; collaboration; interoperability; IFC.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2013_073
id	ecaade2013_073
authors	Both, Katherine; Heitor, Teresa and Medeiros, Valério
year	2013
title	Assessing Academic Library Design: A Performance-Based Approach
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2013.1.337
wos	WOS:000340635300035
summary	Academic Libraries (ALs) design concept has been under a changing process, precipitated by both internal needs and external pressures including changes in the societal context of education, the information services and documentation storage requirements. This paper is focused on a model of form and function to assess AL’ in use, in order to explore ways for better understanding their performance. The proposed model was developed within the scope of a wider research project and makes both use of Post-Occupancy Evaluation and of Space Syntax procedures in order to explore how the spatial configuration influences the performance and use of ALs space. It considers ALs building typology as spatial, physical and social systems, by: 1) measuring users satisfaction about how well the space supports their requirements; and 2) providing information on how architecture and spatial design support - enable and generate - flows of information, communication and knowledge.The analysis provides evidence suggesting that ALs’ spatial system influences study performance, patterns of use and co-presence of its users. The results of data inputs point out prospective strategies about space intervention.
keywords	Academic libraries; functionality; users; evaluation; performance.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia13_061
id	acadia13_061
authors	Bruscia, Nicholas; Romano, Christopher
year	2013
title	Material Parameters and Digitally Informed Fabrication of Textured Metals
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 61-68
doi	https://doi.org/10.52842/conf.acadia.2013.061
summary	The research represented in this paper proposes to reinvestigate the relationship between structure and appearance through a performative analysis of textured stainless steel, as verified through full-scale prototyping. The work takes a scientific design approach while incorporating a computational workflow that is informed by the material’s physical parameters, and draws a connection between the scales of molecular composition to large-scale geometric systems.Furthermore, the work attempts to provide evidence for thin-gauge textured metals as a high performance and adaptive material, by identifying structural rigidity and particular specular quality as inherent characteristics born from the texturing process. In addition, through close collaboration with the sponsoring manufacturer of textured stainless steel, we are able to gain access to material expertise and large-scale fabrication equipment not readily available to designers, thereby forging a mutually beneficial relationship surrounding the research.
keywords	Next Generation Technology, Architecture and Manufacturing, Material Research, Material Science, Digital Fabrication, Rigidized Metal, Parametric Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	sigradi2013_393
id	sigradi2013_393
authors	Cavieres, Andres; Joseph Goodman
year	2013
title	The Role of Functional Knowledge in Multidisciplinary Design: The Case of Solar Energy Integration in Buildings
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 333 - 337
summary	The paper presents a model-based methodology to support multidisciplinary collaboration for the application of photovoltaic systems to buildings. It focuses on the representation of domain specific knowledge necessary for the design of novel PV racking and mounting structures, based on principles of multi-functionality and functional integration. The proposed representation is based on a language for modeling functional requirements in terms of causal behaviors. These behavioral models provide common ground not only for multidisciplinary design, but also for the elaboration of performance metrics and verification procedures for evaluation of design alternatives. The paper concludes with a discussion on the potential of Model-based approach to support innovation in Design.
keywords	Knowledge representation; Functional requirement; Model-based systems Integration; Multidisciplinary design; Solar energy
series	SIGRADI
email
last changed	2016/03/10 09:48

For more results click below: