Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2013_201
id	sigradi2013_201
authors	Bustamante Oleart, Carlos; Paulo K. Ogino Altamirano; Ester Higueras García
year	2013
title	Estrategia Metodológica para la Visualización Digital de Patrones Aerodinámicos Presentes en la Morfología Urbana y su Incidencia en el Uso Estancial de los Espacios Públicos [Methodological Strategy for the Visualization of Aerodynamic Patterns in the Urban Morphology and their Impact on the Use of Public Spaces ]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 108 - 111
summary	In relation to cities, wind is one of the less studied meteorological parameter. Constant vertical rate variations from meso scale to micro scale, altogether with strenght, direction, velocity of the urban canyon, makes the wind a complex subject of study. To achieve this, a methodological strategy that addresses the wind's multi dimensionality was raised. It was aplied to Punta Arenas, the southernmost city in the world, where most of the time winds come 90% from the same direction with speeds reaching 128 km/h. Wind's constant directional behavior allows the recognition of areodynamic phenomena produced, in the first instance, for the wind profiles influenced by the urban rugosity and then, at morphologycal level, the aerodynamic behavior of the layered fluids over the building bodies, generating a regular pattern between solids and fluids. The strong winds in cities with cold climate influence the use of public spaces, which, not being designed under this conditions, do not develop proper levels of thermal comfort.
keywords	Aerodynamics; Urban morphology; Public space; Information visualization
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaadesigradi2019_334
id	ecaadesigradi2019_334
authors	Dembski, Fabian, Wössner, Uwe and Letzgus, Mike
year	2019
title	The Digital Twin - Tackling Urban Challenges with Models, Spatial Analysis and Numerical Simulations in Immersive Virtual Environments.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 795-804
doi	https://doi.org/10.52842/conf.ecaade.2019.1.795
summary	For the built environment's transformation we are confronted with complex dynamics connected to economic, ecologic and demographic change (Czerkauer-Yamu et al., 2013; Yamu, 2014). In general, cities are complex systems being a "heterogeneous mosaic" of a variety of cultures and functions, characterised by diverging perceptions and interests (ibid). The juxtaposed perceptions and interests in relation to ongoing spatial processes of change create a particularly complex situation. Thus, for planning processes we are in need of approaches that are able to cope not only with the urban complexity but also allow for participatory processes to empower citizens. This paper presents the approach of using Digital Twins in virtual reality (VR) for civic engagement in urban planning, enriched with quantitative and qualitative empirical data as one promising approach to tackle not only the complexity of cities but also involve citizens in the planning process.
keywords	Digital Twin; Collaborative Planning; Planning and Decision Support; Participation; Virtual Reality; Global System Science
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ijac201311301
id	ijac201311301
authors	Hack, Norman; Willi Lauer, Silke Langenberg, Fabio Gramazio, Matthias Kohler
year	2013
title	Overcoming Repetition: Robotic fabrication processes at a large scale
source	International Journal of Architectural Computing vol. 11 - no. 3, 285-300
summary	In the context of the Future Cities Laboratory (FCL) of ETH Zurich, the Professorship for Architecture and Digital Fabrication of Fabio Gramazio and Matthias Kohler has set up a robotic laboratory to investigate the potentials of non-standard robotic fabrication for high rise constructions in Singapore. The high degree of industrialisation of this dominant building typology implies standardisation, simplification and repetition and accounts for the increasing monotony evident in many Asian metropolises. The aim of this research on material systems for robotic construction is to develop a new and competitive construction method that makes full use of the malleable potential of concrete as a building material. A novel, spatial, robotic "weaving" method of a tensile active material that simultaneously acts as the form defining mould, folds two separate aspects of concrete-reinforcement and formwork-into one single robotic fabrication process (see Figure 1). This in-situ process could permit the fabrication of structurally differentiated, spatially articulated and material efficient buildings.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2018_1405
id	sigradi2018_1405
authors	Massara Rocha, Bruno; Santo Athié, Katherine
year	2018
title	Emerging senses from Smart Cities phenomenon
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 434-441
summary	The paper analyses the emerging senses from the Smart Cities phenomenon, using as background Lemos (2017), Maia (2013), Rozestraten (2016), Söderström, Paache & Klauser (2014) and evaluating the speeches found in the SmartCity Expo Curitiba. We identified three basic senses: the binary utopia/ficcion, business and informational city, discussed by philosophers such as Foucault (2017), Lévy (2011) e Harvey (2014). The results outline the importance of political role of technology and adverts that it must not be controlled by business. Finally, the paper concludes that the smartest technology is one that opens space to the inclusion of greater human expressivity and subjectivity, not inducing a space of control.
keywords	Smart cities; Digital technologies; Technopolitics;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2013_149
id	cf2013_149
authors	McMeel, Dermott and Robert Amor
year	2013
title	Fabricate It, Paint It – And Don’t Wait up: Separating Fact from Fiction in Digitally Sponsored Fabrication
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 149-158.
summary	This paper offers perspectives on emerging trends in materiality and digital fabrication. It explores effects on communication practices and investigates how this changing materiality of data impacts collaboration and interoperability within design and making. Computer numerical controlled (CNC) routing and laser-cutting services are available in most major cities. Affordable kits for 3D printers, CNC routers and DIY KUKA robots are available across the Internet. A considerable part of the attraction of these tools is the ability to fabricate physical goods without detailed fabrication knowledge. We look at this phenomenon through two sets of examples, making furniture with a CNC router and making robots and tangibles with a 3D printer. In our examples it appears materiality remains an important factor throughout the process. We unpick these examples to shed light on how the technology impacts knowledge practices and ways of thinking during design and making.
keywords	Design, digital media, fabrication, 3D printing, CNC routing, materiality
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2022_001
id	ecaade2022_001
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design- Volume 2
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, 646 p.
doi	https://doi.org/10.52842/conf.ecaade.2022.2
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
keywords	Proceedings, Front Matter
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2022_000
id	ecaade2022_000
authors	Pak, Burak, Wurzer, Gabriel and Stouffs, Rudi
year	2022
title	eCAADe 2022 Co-creating the Future: Inclusion in and through Design - Volume 1
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, 672 p.
doi	https://doi.org/10.52842/conf.ecaade.2022.1
summary	Spatial design is becoming an increasingly social, participatory and inclusive practice. In the last decade, ordinary people all around the world have started to claim a shaping power over the processes of urbanization; over the ways in which our cities are made and remade (Harvey, 2013). There has been a resurgence in the number of do-it-yourself cooperatives initiated by non-designer citizens, activists, artists and designers. In parallel to these developments, a plethora of social technologies, tools and platforms have been developed to include a variety of stakeholders in the architectural design, urban design, planning and decision-making processes. Crowdsourcing and crowdfunding applications started to be widely used to tap into the wisdom of the crowd. Novel developments in parametric design and digital fabrication created possibilities for user participation in the making of customized and highly diversified products. With the combination of artificial intelligence and the Internet of Things, smart buildings, autonomous devices, robots and software started to transform into agents and active participants. The attempts to harness collective human and artificial intelligence opened up new avenues for combining practice, research and education. On the other hand, there is a growing concern over the possible negative impact of the digital devices, tools, platforms and agents integrated in the making of our buildings and cities, public, private and collective spaces. Examples of those are the potential exclusion of vulnerable and disadvantaged citizens, transfer of citizen power to the corporations, privatization of personal life and data, as well as spatial exclusion through increased technological control and surveillance.
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2013_068
id	caadria2013_068
authors	Pedersen, Jens and Andy VanMater
year	2013
title	Resource Driven Urban Metabolism – How Can Metabolic Scaling be Used in Urban Design?
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 561-570
doi	https://doi.org/10.52842/conf.caadria.2013.561
wos	WOS:000351496100055
summary	City scale projects are complex multivariable problems and have previously been addressed using a variety of organisational principles, whether it be the infrastructural grid, used by Ludwig Hilbersheimer in his project “Hochhausstadt” or the spinal organisation of the Tokyo Masterplan done by Kenzo Tange and the Metabolist Movement. This project strays from traditional methods of structuring a city and investigates a novel self-engineered anticipatory model, which focuses on the use of generative and genetic algorithms to develop a new associative system to develop coastal cities in arid climates. The system functions as a negative feedback loop, analysing existing conditions, and by a series of mathematical functions, projecting the new growth patterns for major components of a city, such as building envelopes, road networks, canal networks and public space distribution as a result of the cities internally generated resources.
keywords	Computational design, Generative & evolutionary design, Tooling, City modelling, Urban metabolism
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2013_004
id	caadria2013_004
authors	Rekittke, Joerg; Yazid Ninsalam and Philip Paar
year	2013
title	Open to Ridicule – Deploying Plaything Technology for 3D Modelling of Urban Informal Settlements in Asia
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 541-550
doi	https://doi.org/10.52842/conf.caadria.2013.541
wos	WOS:000351496100053
summary	As technology affine urban landscape researchers,working in Asian mega cities, we roam through crowded and narrow, widely informal city layouts, where we apply digitalfieldwork equipment and conduct design work. We use low cost cameras and camera drones, tools that had been developed asgadgets for outdoor freaks or plaything for nerds. In this paper, we describe recent advances in the development of amethod of on-site data and image gathering, which allows the processing of concrete 3D models of informal city spaces. Thevisual quality of these models is still moderate, but the resulting three-dimensional spatial puzzlemakes a widelyinaccessible and undocumented piece of city terrain visible, understandable and designable. The software used is free.
keywords	Fieldwork tools, Mapping, 3D modelling
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia23_v1_110
id	acadia23_v1_110
authors	Scelsa, Jonathan; Sheward, Gregory; Birkeland, Jennifer; Liu, Jemma; Lin, Yun Jou
year	2023
title	Centripetal Clay Printing : Six-Axis Prints for Habitat Column
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 110-115.
summary	Gottfried Semper, in his 1851 text The Four Elements of Architecture, famously classifies architecture into four elemental parts: the hearth, the roof, the enclosure, and the mound, describing the role of the last three to be the “defenders of the hearth’s flame against the three hostile elements of nature (Semper 2011).” Modernity has witnessed the role of enclosure evolve to that of a sealed envelope, or one which meticulously separates the ‘natural environment,’ from the internally regulated environment as part of modern comfort. The post-modern advent of the rain-screen has further separated the layer of exteriorized cultural expression from the structuring envelope, removing the ornamental aspect of Semper’s enclosure, from the enclosing layer. This habit of casting the natural processes out of our building envelopes has resulted in the rapid depletion of space for biodiversity within our cities. Joyce Hwang in her essay “Living Among Pests,” has suggested that the needed reconnection of biodiversity with our urban buildings will force a re-examination of “facade articulation to take on more responsibilities. Ornament will become performative” (Hwang 2013).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2013_001
id	ecaade2013_001
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 2
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 738 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.1
summary	This is the second volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This second volume contains 75 papers grouped under eleven subthemes that vary from Simulation, Prediction and Evaluation over Models of Computation: Human Factors to Languages of Design.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2013_000
id	ecaade2013_000
authors	Stouffs, Rudi and Sariyildiz, Sevil (eds.)
year	2013
title	Computation and Performance, Volume 1
source	Proceedings of the 31st International Conference on Education and research in Computer Aided Architectural Design in Europe, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, 726 p.
doi	https://doi.org/10.52842/conf.ecaade.2013.2
summary	This is the first volume of the conference proceedings of the 31st eCAADe conference, held from 18-20 September 2013 at the Faculty of Architecture of Delft University of Technology in Delft, the Netherlands. Both volumes together contain 150 papers that were submitted and accepted to this conference.The theme of the 31st eCAADe conference is the role of computation in the consideration of performance in planning and design. Since long, a building no longer simply serves to shelter human activity from the natural environment. It must not just defy natural forces, carry its own weight, its occupants and their possessions, it should also functionally facilitate its occupants’ activities, be aesthetically pleasing, be economical in building and maintenance costs, provide temperature, humidity, lighting and acoustical comfort, be sustainable with respect to material, energy and other resources, and so forth. Considering all these performance aspects in building design is far from straightforward and their integration into the design process further increases complexity, interdisciplinarity and the need for computational support.One of the roles of computation in planning and design is the measurement and prediction of the performances of buildings and cities, where performance denotes the ability of buildings and cities to meet various technical and non-technical requirements (physical as well as psychological) placed upon them by owners, users and society at large.This first volume contains 75 papers grouped under eleven subthemes that vary from Design Decision-Making over Spatial Performance and Space Syntax to Digital Fabrication.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2014_000
id	ecaade2014_000
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 1
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 668 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.2
summary	This is the first volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The first volume of the proceedings contains 65 papers grouped under seven sub-themes (Towards Smarter Cities, Design Tool 1, CAAD Education, Fabrication, Shape-Form-Geometry, Visualisation and Digital Heritage).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	sigradi2015_1.305
id	sigradi2015_1.305
authors	Tonso, Lais Guerle; Nardelli, Eduardo Sampaio
year	2015
title	BIM for thermal performance analysis in Minha Casa Minha Vida Program buildings
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 25-29.
summary	The Minha Casa Minha Vida institutional housing program aims to build millions of residences in Brazilian cities. This situation decreases the building quality as the Federal Government, who founds the program, demands very low costs, so it is even more complicate to achieve quality enhancement. To solve this situation, many regulations have been instituted and, in 2013, ABNT published NBR 15575, a regulation regarding housing building performance, including aspects such as thermal, acoustic and maintenance performance. This paper aims to study thermal analysis section and the possibility to use BIM to achieve accurate data about thermal performance.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ecaade2013r_012
id	ecaade2013r_012
authors	Velasco, Rodrigo; Brakke, Aaron P.; Tocancipá, Fabián
year	2013
title	Notes on the development of a parametric design process for a brisesoleil system
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 143-154
summary	The process of adopting digital simulation and design tools into an existing procedural framework is tedious in that it requires a significant investment by the users. Software manufactures aim to create interfaces that can easily be understood and put into practice. That being said, other factors, such as the lack of climatic data, deter the quick absorption into professional practice. In a country such as Colombia, which is in a zone near the equator and is characterized by drastic differences in topography, the preprogrammed climatic data is insufficient. Even when figures are provided or manually configured, parallel simulations between various software packages reveal significant discrepancies in terms of estimated performance. Wary of this, yet optimistic of the potential of parametric modeling, the authors have developed and implemented a methodological procedure which first articulates the design problem, then develops the parametric model and lastly applies this model. Upon reviewing more than a hundred variations, one configuration was selected as the highest performer. A prototype has been built and is currently being monitored by other researchers with the aim of rectifying the divergence in computed data by various software packages with real numbers. This paper will explain how the parametric design process was developed and the methodology employed in search of an efficient and effective brise soleil system.
keywords	Parametric Design; Eco-Logical Design Process; Computer Aided Architectural Design; Brise Soleil
email
last changed	2013/10/07 19:08

_id	caadria2021_044
id	caadria2021_044
authors	Wu, Shaoji
year	2021
title	3D Space Resilience Analysis of Commercial Complex - Beijing APM as an Example
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2021.2.457
summary	Commercial complexes have played an increasingly important role in contemporary cities. Due to the occurrence of crowded people or equipment overhauls, some paths in a commercial complex may become impassable, which can be seen as disruptions to its spatial system. This paper provides a practical method to quantify the spatial resilience of a commercial complex taking Beijing APM as an example. This study can be divided into the following three steps. First, transforming the realistic spatial path system to a directed network model. Second, using topological, metric, and angular distance as edge weight to calculate the centrality and present its distribution. Third, using two disruption processes, randomized and attractor-guided strategy, evaluates the spatial networks resilience. There are three conclusions from this study. The first one is the process of disruption is non-linear, and there is a phase transition process when it reaches the critical threshold. The second one is the most efficient disruption method is the topological BC attractor-guided strategy. The last one is the resilience of a commercial complex, whose 3D spatial networks resilience is lower than the 2D spatial networks resilience by comparison with Duan and Lus (2013) study.
keywords	Resilience; Robustness; Network Secience; Commercial Complex
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2013_139
id	cf2013_139
authors	Yuan, Philip F.; Mei Zhang, and Li Han
year	2013
title	Low-Tech Digital Fabrication: Traditional Brick as Material in Digital Practice
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 139-148.
summary	Advanced digital fabrication methods are not widely accessible in a developing country like China, where investment in high construction technology is slow and the already known construction methods and manual labour are preferred. The question addressed here is how to put advanced design ideas into practice in developing countries. In order to realize digital architecture in China the fabrication field cannot merely depend on high-technology and avoid low-technological means. The present paper goes through two projects of the Chinese architectural practice Archi-Union to discuss how, through appropriate application of computational technology, digital fabrication revitalizes traditional fabrication techniques, by developing computational aids to traditional construction. In particular, we emphasize the integration of digital fabrication, low-technology and traditional local material.
keywords	Digital design, Low-technology fabrication, Brick
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	acadia13_391
id	acadia13_391
authors	Abbasy-Asbagh, Ghazal
year	2013
title	[re]folding Muqarnas: A case study
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 391-392
doi	https://doi.org/10.52842/conf.acadia.2013.391
summary	This project uses folded surface as a mechanism to make a historically non-structural system, Muqarnas, into one that combines surface and structure.
keywords	structural optimization, folded surface, cultural landscapes, muqarnas, complex geometry
series	ACADIA
type	Design Poster
email
last changed	2022/06/07 07:54

_id	sigradi2013_215
id	sigradi2013_215
authors	Abdelmohsen, Sherif M.
year	2013
title	Reconfiguring Architectural Space using Generative Design and Digital Fabrication: A Project Based Course
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 391 - 395
summary	This paper discusses a course that addresses the integration between generative design and digital fabrication in the context of reconfiguring architectural space. The objective of the course, offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was to design and fabricate interior design elements to be installed within the department lobby. Students worked in digital and physical environments to develop 8 group projects that featured concepts of shape grammars, L-systems, fractals and cellular automata. The potential of the realized projects is discussed in terms of 3D development of systems, contextual generative design, and pedagogical objectives.
keywords	Contextual generative design; Rule-based systems; Self-organizing systems; Digital fabrication
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ijac201310207
id	ijac201310207
authors	Abondano, David
year	2013
title	The Return of Nature as an Operative Model: Decoding of Material Properties as Generative Inputs to the Form-Making Process
source	International Journal of Architectural Computing vol. 11 - no. 2, 267-284
summary	The abandonment of nature as an architectural model and the redefinition of the relationship between form and material were two of the main consequences of industrialization for modern architecture. While nature was replaced by the machine as a model for architecture, industrial production suppressed the craftsman's knowledge of the material and the associated techniques once essential to the form-making process. Thus, the replacement of nature as a model implied that principles once related to natural processes started to be seen as industrial values, i.e., the economy of means stopped being recognized as a quality related to natural form-making processes and became a demand of industrial production. Nowadays, material properties and nature are being reintroduced into architecture with the help of digital technologies; that is, the return of nature though computation. As a result, nature has become an operational model as opposed to the visual or iconic one it used to be; its inner qualities and processes are being decoded in order to inform the form-making process and foster innovative digital ornamentation.
series	journal
last changed	2019/05/24 09:55

For more results click below: