Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 610

Reformat results as: short short into frame detailed detailed into frame

_id	cf2013_063
id	cf2013_063
authors	Correia, José Vitor; Romao Lu_s, Ganhao Susana Rosado, Manuel Couceiro da Costa, Ana Santos Guerreiro, Diogo Pereira Henriques, Sara Garcia, Carlos Albuquerque, Maria Beatriz Carmo, Ana Paula Claudio, Teresa Chambel, Robin Burgess and Christian Marques
year	2013
title	A New Extended Perspective System for Architectural Drawings
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 63-75.
summary	This paper presents the work carried out by a multidisciplinary team of researchers, gathering knowledge in architecture, drawing, geometry, mathematics and computation. The research was directed in order to create a computational tool for architectural visualization - a new digital perspectograph - with the use of a new theoretical and operative approach to linear perspective. A new kind of projection surface, a parametric one, is added to the perspective concept under current tools. The mutations of this surface are explained and a set of graphical outputs is shown. A workshop with architecture students took place to help test and validate the concept and the computational prototype.
keywords	Linear perspective, visualization, drawing, perspectograph
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2013_262
id	caadria2013_262
authors	Alston, Mark E.
year	2013
title	Space Emergent Field
doi	https://doi.org/10.52842/conf.caadria.2013.715
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 715-724
summary	Architecture has always been founded upon ideologies. However could the influence of human interactions create a new perspective for space form evolution? To create a spatial adaptive system, to the influence of culture and behaviour of human being? The output of this spatial system is the determination of optimised values for spatial configurations by biomolecular, self-assembly computation for emergent spatial forms.
wos	WOS:000351496100070
keywords	Spatial, Adaptive, Biomolecular computations, Self-assembly
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_337
id	sigradi2013_337
authors	Al-Haddad, Tristan; Keyan Rahimzadeh; Jill Fredrickson
year	2013
title	Concrete Continuum: Concept, Calculus, & Construction Connected Through Parametric Representation
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 230 - 234
summary	This paper outlines a custom-built suite of scripts that automate the processes of reinforced concrete design and is directly linked to the parametric design model of the architect. The workflow creates a design and engineering feedback loop for early phase schematic design. Using this system, the design geometry is generated and then deconstructed into a Finite Element model. The workflow executes a static analysis then calculates rebar size and placement, and finally generates fabrication drawings. This methodology allows architectural intent and engineering analysis to be collapsed into a single non-linear design process.
keywords	Parametric design; Digital fabrication; Reinforced concrete; Production automation; Design feedback proces
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013_249
id	ecaade2013_249
authors	Araya, Sergio; Zolotovsky, Ekaterina; Veliz, Felipe; Song, Juha; Reichert, Steffen; Boyce, Mary and Ortiz, Christine
year	2013
title	Bioinformed Performative Composite Structures
doi	https://doi.org/10.52842/conf.ecaade.2013.1.575
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 575-584
summary	This ongoing investigation aims to learn from nature novel material organizations and structural systems in order to develop innovative architectural system. We developed a multidisciplinary approach, using scientific analysis and design research and prototyping. We focus on the study of a “living fossil” fish, whose armor system is so efficient it has remained almost unchanged for millions of years. We investigate its morphological characteristics, its structural properties, the assembly mechanisms and the underlying material properties in order to derive new principles to design new enhanced structural systems. We use micro computerized tomography and scanning electron microscopy to observe microstructures, parametric design to reconstruct the data into digital models and then several 3D printing technologies to prototype systems with high flexibility and adaptive capabilities, proposing new gradual material interfaces and transitions to embed performative capabilities and multifunctional potentials.
wos	WOS:000340635300060
keywords	Bioinformed; multi-material; composite; parametrics; performative design.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2013_115
id	ecaade2013_115
authors	Barczik, Günter
year	2013
title	Continuous Oscillations
doi	https://doi.org/10.52842/conf.ecaade.2013.2.571
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 571-578
summary	We present and discuss a didactic for augmenting architectural design education with computational design techniques via integrative feedback loops and show examples of student projects. Our goal is to embed new technical skills into existing design abilities as quickly as possible, in order to enable our students to exploit and explore the extended capabilities of digital design techniques within the framework of architectural design projects. We instigate a process of continuous mutual feedback between different fields: on the one hand between technique-based exercises and design-related steps, and on the other hand between the digital and the physical. Through oscillation and feedback, the newly learned skills are directly interwoven with the existing ones. Special emphasis is put on the illuminative effects of transitions between different media and on issues of fabrication.
wos	WOS:000340643600058
keywords	Design curriculum; tools; shape studies.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201310103
id	ijac201310103
authors	Bollmann, Dietrich and Alvaro Bonfiglio
year	2013
title	Design Constraint Systems - A Generative Approach to Architecture
source	International Journal of Architectural Computing vol. 11 - no. 1, 37-63
summary	Generative Architectural Design permits the automatic (or semiautomatic) generation of architectural objects for a wide range of applications, from archaeological research and reconstruction to digital sketching. In this paper the authors introduce design constraint systems (DCS), their approach to the generation of architectural design with the help of a simple example: The development of the necessary formalisms to generate a family of architectural designs, i.e. simple houses and pagodas. After explaining the formal system the authors introduce an approach for the generation of complex form based on the application of transformations and distortions.Architecture is bound by the constraints of physical reality: Gravitation and the properties of the used materials define the limits in which architectural design is possible. With the recent development of new materials and construction methods however, the ways in which form and physics go together get more complicated. As a result, the shapes of architecture gain more liberty, and more and more complex shapes and structures become possible.While these advances allow for new ways of architectural expression, they also make the design process much more challenging. For this reason new tools are necessary for making this complexity manageable for the architect and enable her to play and experiment with the new possibilities of complex shapes and structures. Design constraint systems can be used as tool for experimentation with complex form. Therefore, the authors dedicate the final part of this paper to a concise delineation of an approach for the generation of complex and irregular shapes and structures. While the examples used are simple, they give an idea of the generality of design constraint systems: By using a two-component approach to the generation of designs (the first component describes the abstract structure of the modelled objects while the second component interprets the structure and generates the actual geometric forms) and allowing the user to adjust both components freely, it can be adapted to all kind of different architectural styles, from historical to contemporary architecture.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

_id	ecaadesigradi2019_405
id	ecaadesigradi2019_405
authors	da Cunha Teixeira, Luísa and Cury Paraizo, Rodrigo
year	2019
title	Caronae - ridesharing and first steps into commuting opportunitie of academic exchange
doi	https://doi.org/10.52842/conf.ecaade.2019.1.805
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 805-816
summary	Location-based mobile applications have been a rising theme for academics in the field of urbanism and in urban and transportation, because of the potential of transformation they might bring to the urban landscape (De Souza e Silva, 2013). One of the possibilities we study here is to observe social encounters fostered by commuting rides. In this paper, we try to examine the practice from the broad perspective of estimating the environmental benefits, in a context where digital information technology is wielded to address problems old and new (Townsend, 2014). This paper aims to analyze the potential of transformations that new ICTs bring to urban mobility, using as case study the official ridesharing system of the Federal University of Rio de Janeiro, the Carona? project. The system was developed focusing on the reduction of the number of motorized trips to the University, as well as the amount of CO2 generated by them. Here we analyze the dynamics of ridesharing, using the system data, and also try to observe the role it may play towards the promotion of integration in the UFRJ community.
keywords	mobile apps; urban mobility; ridesharing; caronae ufrj
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ecaade2013_006
id	ecaade2013_006
authors	Junk, Stefan and Côté, Samantha
year	2013
title	New Methods for the Rapid Prototyping of Architectural Models
doi	https://doi.org/10.52842/conf.ecaade.2013.2.397
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 397-403
summary	Various Rapid Prototyping methods have been available for the production of physical architectural models for a few years. This paper highlights in particular the advantages of 3D printing for the production of detailed architectural models. In addition, the current challenges for the creation and transfer of data are explained. Furthermore, new methods are being developed in order to improve both the technical and economic boundary conditions for the application of 3DP. This makes the production of models with very detailed interior rooms possible. The internal details are made visible by dividing the complex overall model into individual models connected by means of an innovative plug-in system. Finally, two case studies are shown in which the developed methods are applied in order to implement detailed architectural models. Additional information about manufacturing time and costs of the architectural models in the two case studies is given.
wos	WOS:000340643600040
keywords	Architectural model, CAAD, Rapid Prototyping, 3D printing, architectural detail.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia13_243
id	acadia13_243
authors	Khoo, Chin Koi; Salim, Flora
year	2013
title	Responsive Materiality for Morphing Architectural Skins
doi	https://doi.org/10.52842/conf.acadia.2013.243
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 243-252
summary	This paper presents the design of a novel material system with sensing, form-changing and luminous capacities for responsive and kinetic architecture. This aim is explored and evaluated through an experimental design investigation in the form of an architectural skin. Through experimentation with alternative materials and a rigorous process of designing the responsive material systems,a new architectural skin, namely Blanket, emerged from this research. The newly developed responsive material system is an amalgamation of silicone rubbers and glowing pigments, molded and fabricated in a prescribed way—embedded with shape memory alloys on a tensegrity skeletal structure to achieve the desired morphing properties and absorb solar energy to glow in the dark.Thus, the design investigation explores the potential of the use of form-changing materials with capacitance sensing, energy absorbing and illumination capabilities for a morphing architectural skin that is capable of responding to proximity and lighting stimuli. This lightweight, flexible and elastic architectural morphing skin is designed to minimize the use of discrete mechanical components. It moves towards an integrated “synthetic” morphing architecture that can sense and respond to environmental and occupancy conditions.
keywords	next generation technology; responsive material system; morphing architectural skin; kinetic structure; physical computing in architectural design; sensing and luminous material
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	acadia13_253
id	acadia13_253
authors	Krieg, Oliver David; Menges, Achim
year	2013
title	HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
doi	https://doi.org/10.52842/conf.acadia.2013.023
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 23-260
summary	The paper presents current research into architectural potentials of robotic fabrication in wood construction based on elastically bent timber sheets with robotically fabricated finger joints. Current developments in computational design and digital fabrication propose an integrative design approach contrary to classical, hierarchical architectural design processes. Architecture related fields, such as material science, engineering and fabrication have been seen as separate disciplines in a linear design process since the Industrialization era. However, current research in computational design reveals the potentials of their integration and interconnection for the development of material-oriented and performance-based architectural design.In the first part, the paper discusses the potentials of robotic fabrication based on its extended design space. The robot’s high degree of kinematic freedom opens up the possibility of developing complex and highly performative mono-material connections for wood plate structures. In the second part, the integration of material behavior is presented. Through the development of robotically fabricated, curved finger joints, that interlock elastically bent plywood sheets, a bending-active construction system is being developed (Figure 1,Figure 2). In the third part, the system’s architectural application and related constructional performance is discussed.
keywords	Robotic Fabrication; Finger Joints; Material Computation; Wood Construction; Computational Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2014_057
id	caadria2014_057
authors	Nakapan, Walaiporn
year	2014
title	Mobile Learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2014.761
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 761–770
summary	This paper presents a pilot project, using mobile devices in a History of Art and Architecture classroom to enhance instructor-student classroom interactions and student learning. At our Faculty of Architecture this particular class has a usual high failure rate (26% F in 2012). It is a compulsory course for architecture students, some of them are required to take this course twice or more before they can graduate. Traditional learning is lecture-based, and students studying toward their tests are often overloaded with information. In June 2013, Rangsit University initiated a new policy to provide tablets to every freshmen; around 7,200 tablets were distributed campus-wide (Samsung Galaxy Note 10.1 with S-pen). Toward the end of the class, the students were asked to complete a questionnaire in order to find out what they think about mobile learning. Typically, students are quite satisfied, and give positive feedback in their comments. The experience gained from this pilot project will be extended to other classes.
keywords	Design education; Mobile learning; History of Art and Architecture
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2013_068
id	caadria2013_068
authors	Pedersen, Jens and Andy VanMater
year	2013
title	Resource Driven Urban Metabolism – How Can Metabolic Scaling be Used in Urban Design?
doi	https://doi.org/10.52842/conf.caadria.2013.561
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 561-570
summary	City scale projects are complex multivariable problems and have previously been addressed using a variety of organisational principles, whether it be the infrastructural grid, used by Ludwig Hilbersheimer in his project “Hochhausstadt” or the spinal organisation of the Tokyo Masterplan done by Kenzo Tange and the Metabolist Movement. This project strays from traditional methods of structuring a city and investigates a novel self-engineered anticipatory model, which focuses on the use of generative and genetic algorithms to develop a new associative system to develop coastal cities in arid climates. The system functions as a negative feedback loop, analysing existing conditions, and by a series of mathematical functions, projecting the new growth patterns for major components of a city, such as building envelopes, road networks, canal networks and public space distribution as a result of the cities internally generated resources.
wos	WOS:000351496100055
keywords	Computational design, Generative & evolutionary design, Tooling, City modelling, Urban metabolism
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2013_210
id	cf2013_210
authors	Schubert, Gerhard; Sebastian Riedel, and Frank Petzold
year	2013
title	Seamfully Connected: Real Working Models as Tangible Interfaces for Architectural Design
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 210-221.
summary	This paper describes work conducted as part of an interdisciplinary research project into new approaches to using computer technology in the early phases of the architectural design process. The aim is to reduce the existing discrepancy between familiar, analogue ways of working in the early design stages and the increasingly widespread use of digital tools in office practice. Taking this as its starting point, a prototype for a design platform was developed. The core of the project is a direct, real-time connection between real volumetric models, an interactive 3D sketching-tool and interactive digital content that supports the design process. The conceptual and technical core of this connection is an integrated object recognition system. In this paper we describe the need for an integrated solution, the underlying conceptual idea and the recognition methods implemented including their respective strengths and limitations.
keywords	Design Tool, Urban Design, Early Design Stages, HCI
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	sigradi2013_150
id	sigradi2013_150
authors	Tamaoki Figueiredo, Renato; Simone Helena Tanoue Vizioli
year	2013
title	Estudo Comparativo entre as Novas Ferramentas Digitais Utilizadas no Desenho à Mão Livre [Comparative Study between the New Digital Tools Used in Freehand Drawings]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 87 - 91
summary	This paper makes an analysis on the new technological resources related to architectural drawing that make use of the hand drawing. It tests and evaluates the use of new tools such as tablets (e.g. Wacom Bamboo), graphic tablets (e.g. iPad), tablet/screen hybrids (e.g. Wacom Cintiq) and electronic pens (e.g. Wacom Inkling) in the making of free drawings oriented for the developing of graphic products related to the projective act in architecture and design. The paper makes a comparative e interpretative analysis through the reading of those products.
keywords	Digital drawing; Freehand drawing; Project process; Design
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2013_023
id	caadria2013_023
authors	Tessmann, Oliver and Mirco Becker
year	2013
title	Extremely Heavy and Incredibly Light – Performative Assemblies in Dynamic Environments
doi	https://doi.org/10.52842/conf.caadria.2013.469
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 469-478
summary	This research addresses the design and negotiation of two kinds of assemblies that are similar in topology but fundamentally different in performance. Firstly, Topological Interlocking Assemblies (TA) are made of solid elements. Their overall structural integrity relies on each element being kinematical constraint by its neighbours. Secondly, Bell Kites, similar in topology but fundamentally different in performance these kites are made of clusters of tetrahedrons. While TA are heavy, massive and exposed to gravity Bell Kites are super light and dominantly driven by wind forces. These two instances formulate the opposing ends of a spectrum in which a new system, one that is capable of covering the full range of performance, is developed and re-conceptualized in architectural context. The research seeks design-innovation by scrutinizing systems that are not yet part of the architectural ecosystem. Mapping out their performative characteristics and developing their spatial and programmatic potential through conscious design moves explore the potential for architectural applications. The work presented in this paper is the result of a design research studio of the Architecture and Performative Design Class at the Staedelschule in Frankfurt.
wos	WOS:000351496100046
keywords	Topology, Interlocking, Bell kite, Modular, Adjacency
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cf2013_222
id	cf2013_222
authors	Traunmueller Martin and Ava Fatah gen. Schieck
year	2013
title	Following the Voice of the Crowd: Exploring Opportunities for Using Global Voting Data to Enrich Local Urban Context
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 222-232.
summary	With the introduction of the internet to the public and the rise of digital technologies we experience a shift in our understanding of space. Mobile devices and ubiquitous computing in urban landscape make the physicality of distance disappear – the modern citizen is digitally connected to everybody at anytime and anywhere. The result of this network is a highly globalized world which effects economy same as personal interests and decisions of its inhabitants. The introduction of web 3.0 with its methods of comment, recommender and voting systems offers a broad platform for people all over the world to share experiences and exchange opinions about an unlimited variety of topics. Global opinions meet local interests. In this paper we explore the possibilities of using global voting data to enrich locally the modern citizen’s urban walking experience. We describe a new approach to wayfinding by implementing methods of digital recommender systems into the physical world. We investigate Facebook voting data to generate an alternative to the shortest route, as suggested by common route finder systems, in order to maximize the pleasure of an urban stroll. The testing of the system in a real world context together with collected feedback stimulate the discussions.
keywords	Wayfinding, Urban Pedestrian Navigation, Social Networks, Voting data, Mobile Devices, Recommendation Systems
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	caadria2013_030
id	caadria2013_030
authors	Adamantidis, Ermis; Madhav Kidao and Marios Tsiliakos
year	2013
title	Siphonophore – A Physical Computing Simulation of Colonial Intelligence Organisms
doi	https://doi.org/10.52842/conf.caadria.2013.355
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 355-364
summary	This paper sets out to document the procedural design and implementation of “Siphonophore” a multisensory digital ecology, mimicking colonial-ordered behaviour systems. The exploration of the notion of “self” in a complex system of highly integrated individuals with reference to the emergence of behaviours from the human-machine-context interaction, is engaged by this open system’s hierarchical articulation of electronics, Arduino boards, sensors and programming routines. User interaction and recorded statistics from the system’s core algorithm are assessed, in relation to the capacity of this prototype to provide an alternative methodology of describing collective intelligence, while presenting a non-standard perspective of body-space interaction and design as entertaining art. The overall impact is discussed in relation to the examined observations, towards a potential advancement to a system of superior contextual understanding.
wos	WOS:000351496100035
keywords	Colonial intelligence, Multisensory installation, Physical computing, Spatial sensing, Human-machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: