Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 587

Reformat results as: short short into frame detailed detailed into frame

_id	acadia13_281
id	acadia13_281
authors	Ahlquist, Sean; Menges, Achim
year	2013
title	Frameworks for Computational Design of Textile Micro-Architectures and Material Behavior in Forming Complex Force-Active Structures
doi	https://doi.org/10.52842/conf.acadia.2013.281
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 281-292
summary	Material behavior can be defined as the confluence of associative rules, contextual pressures and constraints of materialization. In more general terms, it can be parameterized as topologies, forces and materiality. Forming behavior means resolving the intricate matrix of deterministic and indeterministic factors that comprise and interrelate each subset of these material- nherent conditions. This requires a concise design framework which accumulates the confluent behavior through successive and cyclical exchange of multiple design modes, rather than through a single design environment or set of prescribed procedures. This paper unfolds a sequencing of individual methods as part of a larger design framework, described through the development of a series of complex hybrid- structure material morphologies. The “hybrid” nature reflects the integration of multiple force-active structural concepts within a single continuous material system, devising both self-organized yet highly articulated spatial conditions. This leads primarily to the development of what is termed a “textile hybrid” system: an equilibrium state of tensile surfaces and bending-active meshes. The research described in this paper looks to expose the structure of the textile as an indeterministic design parameter, where its architecture can be manipulated as means for exploring and differentiating behavior. This is done through experimentation with weft-knitting technologies, in which the variability of individual knit logics is instrumentalized for simultaneously articulating and structuring form. Such relationships are shown through an installation constructed at the ggggallery in Copenhagen, Denmark.
keywords	Material Behavior, Spring-based Simulation, CNC Knitting, Form- and Bending-Active, Textile Hybrid Structures.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia20_340
id	acadia20_340
authors	Soana, Valentina; Stedman, Harvey; Darekar, Durgesh; M. Pawar, Vijay; Stuart-Smith, Robert
year	2020
title	ELAbot
doi	https://doi.org/10.52842/conf.acadia.2020.1.340
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 340-349.
summary	This paper presents the design, control system, and elastic behavior of ELAbot: a robotic bending active textile hybrid (BATH) structure that can self-form and transform. In BATH structures, equilibrium emerges from interaction between tensile (form active) and elastically bent (bending active) elements (Ahlquist and Menges 2013; Lienhard et al. 2012). The integration of a BATH structure with a robotic actuation system that controls global deformations enables the structure to self-deploy and achieve multiple three-dimensional states. Continuous elastic material actuation is embedded within an adaptive cyber-physical network, creating a novel robotic architectural system capable of behaving autonomously. State-of-the-art BATH research demonstrates their structural efficiency, aesthetic qualities, and potential for use in innovative architectural structures (Suzuki and Knippers 2018). Due to the lack of appropriate motor-control strategies that exert dynamic loading deformations safely over time, research in this field has focused predominantly on static structures. Given the complexity of controlling the material behavior of nonlinear kinetic elastic systems at an architectural scale, this research focuses on the development of a cyber-physical design framework where physical elastic behavior is integrated into a computational design process, allowing the control of large deformations. This enables the system to respond to conditions that could be difficult to predict in advance and to adapt to multiple circumstances. Within this framework, control values are computed through continuous negotiation between exteroceptive and interoceptive information, and user/designer interaction.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia13_293
id	acadia13_293
authors	Bessai, Tom
year	2013
title	Bending-Active Bundled Structures: Preliminary Research and Taxonomy Towards an Ultra-Light Weight Architecture of Differentiated Components
doi	https://doi.org/10.52842/conf.acadia.2013.293
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 293-300
summary	This paper documents preliminary research into a bending-active architecture that leverages the “bundling” of linear force-active elements in order to create spatial diversity and differentiation.The primary design components of the system are light-weight GFRP rods and tubes that perform well in elastic bending. Material testing and iterative physical model studies are documented, and provide a framework to guide the further development of emerging spring-based computation methods. Challenges to the system include the analysis and resolution of rod-to-rod bundled connections, as well as the development of predictable bifurcation and crossing unions. The paperidentifies key precedents to the work followed by a brief summary of the material selection and testing framework. A speculative taxonomy of bundled bending-active “types” is proposed and supported by examples and prototypes.
keywords	Bundling, Bending-Active, Force-Active Architecture, Material Systems, Spring-based Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	acadia13_253
id	acadia13_253
authors	Krieg, Oliver David; Menges, Achim
year	2013
title	HygroSkin: A climate-responsive prototype project based on the elastic and hygroscopic properties of wood
doi	https://doi.org/10.52842/conf.acadia.2013.023
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 23-260
summary	The paper presents current research into architectural potentials of robotic fabrication in wood construction based on elastically bent timber sheets with robotically fabricated finger joints. Current developments in computational design and digital fabrication propose an integrative design approach contrary to classical, hierarchical architectural design processes. Architecture related fields, such as material science, engineering and fabrication have been seen as separate disciplines in a linear design process since the Industrialization era. However, current research in computational design reveals the potentials of their integration and interconnection for the development of material-oriented and performance-based architectural design.In the first part, the paper discusses the potentials of robotic fabrication based on its extended design space. The robot’s high degree of kinematic freedom opens up the possibility of developing complex and highly performative mono-material connections for wood plate structures. In the second part, the integration of material behavior is presented. Through the development of robotically fabricated, curved finger joints, that interlock elastically bent plywood sheets, a bending-active construction system is being developed (Figure 1,Figure 2). In the third part, the system’s architectural application and related constructional performance is discussed.
keywords	Robotic Fabrication; Finger Joints; Material Computation; Wood Construction; Computational Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:51

_id	caadria2013_034
id	caadria2013_034
authors	Arenas, Ubaldo and José Manuel Falcón
year	2013
title	ALOPS Constructive Systems – Towards the Design and Fabrication of Unsupervised Learning Construction Systems
doi	https://doi.org/10.52842/conf.caadria.2013.905
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 905-914
summary	In this paper we explore the concept and design guidelines for an Autonomous Learning Oriented Proto System (ALOPS), a construction system designed to enhance its own performance through time. Our research has been focused on the fabrication of a prototype for a porous wall system which reacts to light intensities by closing or opening its apertures. Taking that aim, we used a combination of robotics, programing, and material behaviour to endow the system with the capacity to record reactions towards encountered sets of conditions during its active energy periods, allowing the system to use this knowledge database to evolve autonomously by feeding this information back into the computation process. This approach in construction systems opens up the architectural design processes to address the creation of digital memory structures rather than complex algorithms in order to operate specific functions. With this development, the architect could think of architectures constantly evolving by learning from their environments as well as of users forming symbiotic and behavioural bonds with the emergent spatial personalities, thus affecting the underpinning relationships between architecture, user and context.
wos	WOS:000351496100093
keywords	erformance architecture, Unsupervised learning, Machine learning
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia13_033
id	acadia13_033
authors	Correa, David; David Krieg, Oliver; Menges, Achim; Reichert, Steffen; Rinderspacher, Katja
year	2013
title	HygroSkin: A prototype project for the development of a constructional and climate responsive architectural system based on the elastic and hygroscopic properties of wood
doi	https://doi.org/10.52842/conf.acadia.2013.033
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 33-42
summary	This paper focuses on the implementation of a computational design and robotic fabrication method that integrates the elastic and hygroscopic behavior of wood as active drivers in the design process, using the material’s differentiated characteristics as its main capacity. The project builds on previous work by the authors, furthering their research on the formal and performative transfer of such behaviors into informed architectural systems. Wood’s fibrous structure, relatively low stiffness and high structural capacity are instrumentalized into self-forming mechanisms through conical elastic deformation, while the same organic makeup and corresponding hygroscopic properties have also been programmed, formally articulated and integrated into a climate responsive architectural system. This research will be presented alongside a full-scale architectural project (Figure 1, Figure 2).
keywords	computational design; robotic fabrication; wood construction; elastic bending; hygroscopic actuation
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2013_220
id	ecaade2013_220
authors	Vrouwe, Ivo and van Swieten, Peter
year	2013
title	Reframing Structures
doi	https://doi.org/10.52842/conf.ecaade.2013.1.703
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 703-710
summary	This paper aims at the discussion of opportunities and challenges of using specific construction sub-problems as active parameters in the physical construction of digital parametric design models. To create an overview, a taxonomy of sub-problems for construction is introduced. By using prototypes as a physical interface for the digital model, the different sub-problems become an integrated part of the digital design process. By a reflective process the digital model is informed by the material parameters gradually.A case study is presented to discuss two different implementation strategies. The students acting in this study are presented with a combination of five sub-problems. Starting with these sub-problems, the student design a product digitally. By a reflective process, the object is materialized digitally and built physically.
wos	WOS:000340635300073
keywords	Framing; parametric design; craft; structures; education.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia23_v3_77
id	acadia23_v3_77
authors	Zahiri, Nima
year	2023
title	Heigh-active Wood: Elasticity, Anisotropicity, and Hygroscopicity in Timber High-Rises
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The term ‘height-active’ coined by Heino Engel refers to “structure systems, of which the main task is to collect loads from horizontal planes . . . and to vertically transmit them to the base . . . or high-rises accordingly.” (Engel 2013, 14) The focus of this paper is on the characteristics of height-active wood structures due to their vertical extension and susceptibility to horizontal loading. We shall argue that “more innovation can be expected from the advanced understanding of material characteristics, which can be integrated and taken advantage of in the design process, rather than homogenized, approximated or ignored.” (Correa, Krieg and Meyboom 2019, 74) Conventional construction, insofar, has employed linear and planar wood elements in a hierarchical manner. There is an interest to take advantage of wood’s flexibility to innovate free-form high-rise wood structures. Digitized material application of wood has a wide range of technical and functional adaptation. This field notes essay highlights the importance of three main material characteristics of wood – elasticity, anisotropicity, hygroscopicity – for structural design typology of evolving high-rise endeavors.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	acadia23_v1_128
id	acadia23_v1_128
authors	Fayyad, Iman
year	2023
title	Bending Cylinders: Geometries of the Anthropocene
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 128-135.
summary	Over the past several decades, the conception and construction of formal complexity has disregarded the realities of material waste, costs, and accessibility. By engaging the isometric relationship between flatness and three-dimensional form, the research shown here investigates how waste-conscious approaches to geometric innovation can create new architectural languages. Specifically, the work deploys a subset of curved-crease folding that uses planar reflections referred to as sectional mirror operations to create unique forms comprised of composite cylindrical and conical surfaces (Figure 1). Whereas known studies in curved-crease folding typically explore singular (one-off, figural) compositions (Davis et al. 2013), this process develops a module aggregation strategy to suggest large inhabitable structures as both figural and field-like conditions.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia20_114p
id	acadia20_114p
authors	Zivkovic, Sasa; Havener, Brian; Battaglia, Christopher
year	2020
title	Log Knot
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 114-119.
summary	Log Knot, developed by the Robotic Construction Laboratory (RCL) at Cornell University, is a robotically fabricated architectural installation that establishes a method for variable compound timber curvature creation utilizing both regular and irregular roundwood geometries. Moreover, the project develops methods for minimal formwork assembly and moment force optimization of customized mortise and tenon joints. Following the logic of a figure-8 knot, the project consists of an infinite loop of roundwood, curving three-dimensionally along its length. There are a variety of techniques to generate single curvature in wood structures – such as steam bending (Wright et al., 2013) or glue lamination (Issa and Kmeid, 2005) – but only a few techniques to generate complex curvature from raw material within a single wooden structural element exist. To construct complex curvature, the research team developed a simple method that can easily be replicated. First, the log is compartmentalized, establishing a series of discrete parts. Second, the parts are reconfigured into a complex curvature “whole” by carefully manipulating the assembly angles and joints between the logs. Timber components reconfigured in such a manner can either follow planar curvature profiles or spatial compound curvature profiles. Based on knowledge gained from the initial joinery tests, the research team developed a custom tri-fold mortise and tenon joint, which is self-supportive during assembly and able to resist bending in multiple directions. Using the tri-fold mortise and tenon joint, a number of full-scale prototypes were created to test the structural capacity of the overall assembly. Various structural optimization protocols are deployed in the Log Knot project. While the global knot form is derived from spatial considerations – albeit within the structurally sound framework of a closed-loop knot structure – the project is structurally optimized at a local level, closely calibrating structural cross-sections, joinery details, and joint rotation in relation to prevailing load conditions.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	caadria2013_210
id	caadria2013_210
authors	Baerlecken, Daniel; Katherine Johnson and Alice Vialard
year	2013
title	Mobilized Materials – Textile Constructs
doi	https://doi.org/10.52842/conf.caadria.2013.333
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 333-342
summary	This paper investigates textiles techniques and their potential for creating ornamental and structural systems investigated through a sequence of design studios. Within the paper 3 examples of textile systems are introduced that range from a Semperian approach (wall as dress) to form finding experiments with active textile materials (Frei Otto).
wos	WOS:000351496100033
keywords	extiles, Form-finding, Analogue computing, Design methodology, Craft
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_390
id	sigradi2013_390
authors	Banda, Pablo; Juan Eduardo Subercaseaux
year	2013
title	Meta-patrones Morfogenéticos: Propuesta de Framework para Arquitecturas Generativas Basadas en Desempeño [Morphogenetic Meta-Patterns: A framework proposal for Performance-Generated Architectures]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 253 - 257
summary	Architecture and Technology’s relationship nowadays has arrived to multi-disciplinary practices; they are growing exponentially while keeping away from to architectural discourse, are remarkable for its expressive power and the ability to solve complex problems. This opens the possibility for the generation of the organic, a path discarded by the Modern Movement in the past.Our approach explores three active premises called Morphogenetic Meta-Patterns: discrete processes (systemic guidelines) for the development of performance-based generative systems. These processes arise from Generative Design and their associated paradigms in the creation of a Framework between architecture and related disciplines.
keywords	Design of parametric systems; Part-to-whole debate; Generative design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2013_100
id	caadria2013_100
authors	Chen Kian Wee, Patrick Janssen and Arno Schlueter
year	2013
title	A Design Method for Multicriteria Optimisation of Low Exergy Architecture
doi	https://doi.org/10.52842/conf.caadria.2013.117
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 117-126
summary	This paper proposes a design method for the exploration of holistic low exergy design strategies which factor in limitations and constraints of both passive and active systems. A design method that consists of a two loop structure is proposed. The inner loop consists of an automated workflow that includes three main components: a developmental procedure for generating design variants; evaluation procedures for evaluating design variants; and an optimisation procedure for optimising populations of design variants. The outer loop consists of a manual workflow that has two main components: a schema formulation process for defining the inputs to the automated workflow and a data analysis process for analysing the data produced by the automated workflow. A case study is presented that demonstrates the proposed method.
wos	WOS:000351496100012
keywords	Low exergy design, Parametric design, Evolutionary design, Integrated design process, Performance driven design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac201311305
id	ijac201311305
authors	Esquivel, Gabriel; Dylan Weiser, Darren J Hartl, Daniel Whitten
year	2013
title	POP-OP: A Shape Memory-Based Morphing Wall
source	International Journal of Architectural Computing vol. 11 - no. 3, 347-362
summary	Recent tendencies in architecture take a unique point of view, with aesthetically novel and unnatural sensibilities emerging from a close scrutiny and study of apparently natural systems. These tendencies are being driven by mathematical and computational abstractions that transform the way we understand the matterinformation relationship. This project was inspired by Op Art, a twentieth century art movement and style in which artists sought to create an impression of movement on an image surface by means of an optical illusion. Passive elements consisting of composite laminates were produced with the goal of creating lightweight, semi-rigid, and nearly transparent pieces. The incorporation of active materials comprised a unique aspect of this project: the investigation of surface movement through controlled and repeatable deformation of the composite structure using shape memory alloy (SMA) wiring technology. The integration of composite materials with SMA wiring and Arduino automation control resulted in an architectural wall that incorporated perceptual and actual motion.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2013_28
id	sigradi2013_28
authors	González Böhme, Luis Felipe; Cristián Calvo Barentin; Mauro Chiarella
year	2013
title	Métodos Computacionales en Arquitectura: La Formación de Arquitectos con Competencia en CyT [Computational Methods in Architecture: The Education of Architects with Competence in S&T]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 524 - 528
summary	Tomorrow’s architects will need to deal more confidently and skillfully with scientific and technological innovations in their field, e.g., parametric design, building physics, construction robotics, home automation, etc. Architecture students today must understand how things work and absorb some of the basic principles and techniques involved in their design, construction or operation. Now students need to build back some of that analytical, logical, critical, and analogical thinking that may have atrophied due to a traditional architectural education. Playing with toy construction kits for building automatic control and mobile robot models, does the job without losing the architect´s approach and attitude.
keywords	Architectural education; Construction kits; Educational computing; Active learning; Learning styles
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	ijac201311301
id	ijac201311301
authors	Hack, Norman; Willi Lauer, Silke Langenberg, Fabio Gramazio, Matthias Kohler
year	2013
title	Overcoming Repetition: Robotic fabrication processes at a large scale
source	International Journal of Architectural Computing vol. 11 - no. 3, 285-300
summary	In the context of the Future Cities Laboratory (FCL) of ETH Zurich, the Professorship for Architecture and Digital Fabrication of Fabio Gramazio and Matthias Kohler has set up a robotic laboratory to investigate the potentials of non-standard robotic fabrication for high rise constructions in Singapore. The high degree of industrialisation of this dominant building typology implies standardisation, simplification and repetition and accounts for the increasing monotony evident in many Asian metropolises. The aim of this research on material systems for robotic construction is to develop a new and competitive construction method that makes full use of the malleable potential of concrete as a building material. A novel, spatial, robotic "weaving" method of a tensile active material that simultaneously acts as the form defining mould, folds two separate aspects of concrete-reinforcement and formwork-into one single robotic fabrication process (see Figure 1). This in-situ process could permit the fabrication of structurally differentiated, spatially articulated and material efficient buildings.
series	journal
last changed	2019/05/24 09:55

_id	ijac201310202
id	ijac201310202
authors	Leidi, Michele; Arno Schlüter
year	2013
title	Exploring Urban Space: Volumetric Site Analysis for Conceptual Design in the Urban Context
source	International Journal of Architectural Computing vol. 11 - no. 2, 157-182
summary	This paper proposes a set of new analytic and visualization methods for conceptual design in the urban context. The methodology is based on the discretization of the urban site into a volumetric grid of points. For each of these points, different physical properties such as solar radiation, airflow, and visibility are computed. Subsequently interactive visualization techniques allow the observation of the site at a volumetric, directional and dynamic level, making visible information that is typically invisible. Several case-studies demonstrate how this allows to generate suggestions, for example, for the definition of the form of a building or for the rationalization of its surfaces. This approach aims at developing a conceptual design process that allows the fusion of active technologies, passive methods, and expressive aspects, in cohesive concepts able to embrace and exploit the diversities of an urban site.
series	journal
last changed	2019/05/24 09:55

_id	acadia13_199
id	acadia13_199
authors	Meyboom, AnnaLisa; Reeves, Dave
year	2013
title	Stigmergic Space
doi	https://doi.org/10.52842/conf.acadia.2013.200
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 200-206
summary	This paper presents a multi-agent approach to space planning. Using the algorithm as a primary design tool, it posits to model an active site of programmable collective intelligence—one that is able to inform its own development internally. The mechanisms of self-organization from ants, termites, slime molds and other social organisms are examined and adapted to solve spatial adjacencies amongst elements of a given programmatic brief. Spatial organization becomes the emergent product of a competitive ecology. The task of space planning, one that is typically carried out by a singular high-level decision-maker (the architect, is approached through the distributed decision-making of low-level collective intelligence. This approach facilitates the design of a problem with high levels of complexity and competing requirements.
keywords	agent-based, collective intelligence, parametric, stigmergy, cybernetic ecology
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	caadria2013_113
id	caadria2013_113
authors	Muslimin, Rizal
year	2013
title	Decoding Passura’ – Representing the Indigenous Visual Messages Underlying Traditional Icons with Descriptive Grammar
doi	https://doi.org/10.52842/conf.caadria.2013.781
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 781-790
summary	For the Toraja people in South Sulawesi, Indonesia, the engraved ornament (Passura’) means more than a simple decorative element. More importantly, Passura’ also serves as a symbolic icon to convey spiritual messages. However, only few people actually understand the underlying meaning behind the ornament. Consequently, those without this knowledge can only appreciate the aesthetic dimension of Passura’. Our computational design research focuses on under-standing the visual–linguistic aspect of Passura’ using Descriptive Grammar method to investigate how meanings are embedded on the ornaments. The design rules and their description are synthesized into a shape-to-text grammar that can read the ornament as a text, and into a text-to-shape grammar that can write a text into an ornamental design. Preliminary results of this grammar demonstrate how Passura’ works as an active indigenous communication device, rather than simply being a passive decorative element.
wos	WOS:000351496100081
keywords	Passura, Ornament, Shape grammar, Toraja
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2013r_006
id	ecaade2013r_006
authors	Neto, Pedro L.; Vieira, Andrea P.; Moreira, Bruno; Ribeiro, Lígia
year	2013
title	A blended-learning approach in CAAD. Enhancing an architectural design studio experience by using collaborative web applications.
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 83-94
summary	This paper is the result of a research project started in 2007 in our architecture school which aimed to adopt a Blended-Learning approach in teaching CAAD to 3rd year architecture students, while integrating the knowledge produced by our R&D Unit on architectural representation and communication techniques and web applications. We present our main conclusions regarding this strategy’s results and the web applications involved to understand if they acted like catalysts for engaging students with their learning process and for promoting a better communication between them and their teachers. The article shows how this strategy created new forms of interaction making communication between teachers and students easier and giving the latter an active role in the learning process. We start with an introduction to CAAD’s pedagogical strategy; we then describe the strategy and model applied to several case studies and the materials and learning tools used. Finally, we’ll discuss the most significant results and draw the main conclusions. The results highlight how the learning process coming from the Blended-Learning strategy and the use of complementary web applications strengthens the student’s and teacher’s capacity to work in a close relationship while maintaining the student’s active role in the learning process.
keywords	Blended-learning; education in architecture; communication and representation; collaborative teaching and learning; design studio environment
email
last changed	2013/10/07 19:08

For more results click below: