Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_184
id	ecaade2013_184
authors	Fraguada, Luis; Girot, Christophe and Melsom, James
year	2013
title	Ambient Terrain
doi	https://doi.org/10.52842/conf.ecaade.2013.1.433
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 433-438
summary	‘Ambient Terrain’ explores the application of large-scale, sensor-based site analysis. The research develops various techniques dealing with the logging, storage, retrieval, analysis, and representation of sensor and image-based data. These techniques could be utilized in concert with traditional site preparation and site information gathering processes, and could arguably serve to reevaluate the site preparation process altogether in a manner which not only focuses on terrestrial data, but also on metrics which are dynamic and multidimensional.The research proposes direct applications for urban space and the built environment, in the modes of site appraisal, design and the generation of new spatial strategies.
wos	WOS:000340635300045
keywords	Unmanned Aerial Vehicle; sensor data logging, ambient site analysis, UAV data collection; photogrammetry, stereophotogrammetry.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2013_135
id	caadria2013_135
authors	Williams, Nick; Daniel Davis, Brady Peters, Alexander Peña De León, Jane Burry and Mark Burry
year	2013
title	FabPOD: An Open Design-to-Fabrication System
doi	https://doi.org/10.52842/conf.caadria.2013.251
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 251-260
summary	Digital workflows from the design to the production of buildings have received significant recent attention in architectural research. The need for both integrated systems for design collaboration (Boeykens and Neuckermans, 2006) and clear and flexible communication flows for non-standard fabrication outcomes have been identified as fundamental (Scheurer, 2010). This paper reports on the development of a digital “design system” for the design and prototyping of an acoustic enclosure for meetings in a large open work environment, theFabPod. The aim was to keep this system open for temporal flexibility in as many aspects of the finalisation of the design as possible. The system provides novel examples of both integrated collaboration and clear communication flow. (1) Acoustics is included as a design driver in early stages through the connection of digital simulation tools with design models. (2) Bi-directional information flows and clear modularisation of workflow underpins the system from design through to fabrication and assembly of the enclosure. Following the completion and evaluation of the FabPod prototype, the openness of the system will be tested through its application in subsequent design and prototyping iterations. Design development will respond to performance testing through user engagement methods and acoustic measurement.
wos	WOS:000351496100025
keywords	Digital workflow, Prototyping, Acoustic simulation, Collaborative design
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	cf2013_167
id	cf2013_167
authors	Carlow, Jason F. and Kristof Crolla
year	2013
title	Shipping Complexity: Parametric Design for Remote Communities
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 167-175.
summary	This paper presents a system for design and construction of a parametrically designed, structural shell for remote communities. It explains how, through the use of various digital software platforms, a single-layer, structural shell is designed and optimized and subsequently how a series of customized joints can be output for direct digital fabrication. As the customization is focused primary in the joints of the structure, standard dimension, locally sourced structural members can be used. By embedding assembly information onto the physical joints, the system has the capacity to simplify the construction of complex shell structures by workers with basic construction skills. Flat-packed joints can be shipped to remote sites without heavy structural members thereby reducing transportation costs and the overall embodied energy. By lowering cost and simplifying construction of large span structures, the project is intended to extend the benefits of digitally driven design to rural, remote or under-privileged communities.
keywords	Parametric design, structural shell, remote communities, embedded intelligence, digital fabrication.
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaadesigradi2019_405
id	ecaadesigradi2019_405
authors	da Cunha Teixeira, Luísa and Cury Paraizo, Rodrigo
year	2019
title	Caronae - ridesharing and first steps into commuting opportunitie of academic exchange
doi	https://doi.org/10.52842/conf.ecaade.2019.1.805
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 805-816
summary	Location-based mobile applications have been a rising theme for academics in the field of urbanism and in urban and transportation, because of the potential of transformation they might bring to the urban landscape (De Souza e Silva, 2013). One of the possibilities we study here is to observe social encounters fostered by commuting rides. In this paper, we try to examine the practice from the broad perspective of estimating the environmental benefits, in a context where digital information technology is wielded to address problems old and new (Townsend, 2014). This paper aims to analyze the potential of transformations that new ICTs bring to urban mobility, using as case study the official ridesharing system of the Federal University of Rio de Janeiro, the Carona? project. The system was developed focusing on the reduction of the number of motorized trips to the University, as well as the amount of CO2 generated by them. Here we analyze the dynamics of ridesharing, using the system data, and also try to observe the role it may play towards the promotion of integration in the UFRJ community.
keywords	mobile apps; urban mobility; ridesharing; caronae ufrj
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	cf2013_347
id	cf2013_347
authors	Dillenburger, Benjamin and Michael Hansmeyer
year	2013
title	The Resolution of Architecture in the Digital Age
source	Global Design and Local Materialization[Proceedings of the 15th International Conference on Computer Aided Architectural Design Futures / ISBN 978-3-642-38973-3] Shanghai, China, July 3-5, 2013, pp. 347-357.
summary	The resolution of architecture is a measure of the spatial density of information inherent in a building. This paper demonstrates how the confluence of advances in computational design and additive manufacturing has recently led to a paradigm shift in potential architectural resolution. Buildings can now be designed and fabricated with elements at the threshold of human perception. This resolution can be used to replicate existing architectural styles ever more efficiently and accurately. Yet as with the introduction of other new technologies, architects must now explore the latent potentials and determine what kind of new architectures become conceivable. Specifically, what architectures can adequately express this enormous resolution and the unlimited geometric complexity within reach? With the project Digital Grotesque, we present the first human-scale, enclosed structure that truly exploits these opportunities. Algorithms are used to articulate and orchestrate the geometry from the macro scale down to 1mm small details. The structure is enriched with local information at a previously unseen resolution. A unique language of form is developed that transcends rationality and celebrates spatial expression: a digital exuberance.
keywords	high resolution, additive manufacturing, 3d printing, digital fabrication, computational design, subdivision, mesh
series	CAAD Futures
email
last changed	2014/03/24 07:08

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2013r_019
id	ecaade2013r_019
authors	Portugal, Vasco
year	2013
title	Knowledge-based methodology for architectural robotics fabrication. Real time impact assessment through a process flow analysis software
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 229-236
summary	The main goal of the project is to generate a framework for a knowledge-based-methodology (KBM) within a parametric software. This is accomplished through a combination of the design software and robot simulation with real-time assessment based on a process-flow-diagram (PFD) structure that compiles the main environmental parameters of the manufacture process. The intention is to create a methodology to directly report the impact of the manufacture of a specific design, from the materials embodied energy to the energy consumption of each step. This framework provides valuable information which may monitor the developer towards alterations to increase the CAD/CAM performance. In the context of this paper, this methodology was applied in the conceptual design and manufacture of a housing structural insulated panel prototype using parametric design software and robotic equipment. The purpose is to generate a quasi-automated design process linked with real-time analysis and assessment of the fabrication process, offering real time environmental and cost analysis of a panelized structure house manufacture logic. The suggested methodology outputs information to compare and optimize the manufacture outline, and supports the screening and assortment of appropriate tool paths or combination of fabrication tools based on environmental/cost data, user-specified requirements and context characteristics.
keywords	CAD/CAM; Parametric design; Robotics in Architecture; Process flow diagrams
email
last changed	2013/10/07 19:08

_id	ecaade2013_062
id	ecaade2013_062
authors	Bittermann, Michael S. and Ciftcioglu, Ozer
year	2013
title	Ambient Surveillance by Probabilistic-Possibilistic Perception
doi	https://doi.org/10.52842/conf.ecaade.2013.2.345
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 345-353
summary	A method for quantifying ambient surveillance is presented, which is based on probabilistic-possibilistic perception. The human surveillance of a scene through observing camera sensed images on a monitor is modeled in three steps. First immersion of the observer is simulated by modeling perception of the scene from the camera locations using probabilistic perception approach. The perceptions are thereafter combined by means of probabilistic union, simulating simultaneous watching of the scene from multiple viewing positions. As third step the combined perceptions are converted to a possibility using triangular possibility density function. The latter step accounts for the fact that surveillance takes place via monitor depiction and not directly as perception of the actual physical scene. The method is described and demonstrated by means of an ambient surveillance application involving three cameras. The resulting possibility of perception is compared to the case of using two cameras, quantifying the added value of additional camera as to surveillance.
wos	WOS:000340643600035
keywords	Perception; possibility; ambient intelligence; surveillance.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2013_240
id	caadria2013_240
authors	Fok, Wendy W.
year	2013
title	3 Scales of Repurposed Disposability – Diversion of Construction, Renovation and Demolition (CRD)
doi	https://doi.org/10.52842/conf.caadria.2013.811
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 811-820
summary	Project managers and construction contractors have long recognized the importance of reducing waste and salvaging high value construction and demolition materials such as copper and other metals. Contractors are usually careful about the quantity of materials ordered, how materials are used and how to carefully deconstruct valuable materials. In most cases however, materials that are more difficult to separate and that are worth less per unit weight are still going to landfill, even when they are present in large quantities. This represents an inefficient use of natural resources and uses up landfill capacity unnecessarily. Unfortunately, some contractors do not realize that there are new opportunities for waste minimization, while others are reluctant to implement environmental practices because they believe these practices will increase their project costs. Most contractors are concerned about the cost of the labour that is needed to deconstruct materials for reuse or recycling. However, it has been shown that effective waste management during CRD projects not only helps protect the environment, but can also generate significant economic savings. Various projects from within our practice and within our academic curriculum will be brought into the attention of this paper. Specifics of modularity, form/fit/analysis, fabrication, and off-site production, will be demonstrated within the larger discussion through the focus onto three case studies.
wos	WOS:000351496100074
keywords	Construction alternatives, Waste management, Offsite production, Fabrication, Form/Fit/Analysis, Modularity
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia13_079
id	acadia13_079
authors	Jason Gerber, David; Eve Lin, Shih-Hsin; Amber Ma, Xinyue
year	2013
title	Designing-In Performance: A Case Study of Applying Evolutionary Energy-Performance Feedback for Design (EEPFD)
doi	https://doi.org/10.52842/conf.acadia.2013.079
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 79-86
summary	This paper explores the application of a novel Multi-disciplinary Design Optimization (MDO) framework to the early stage design process, through a case study where the designer serves as the primary user and driver. MDO methods have drawn attention from the building design industry as a potential means of overcoming obstacles between design and building performance feedback to support design decision-making. However, precedents exploring MDOs in application to the building design have previously been limited to driving use by engineers or research teams,thereby leaving the incorporation of MDO into a design process by designers largely unexplored. In order to investigate whether MDO can enable the ability to design in a performance environment during the conceptual design stage, a MDO design framework entitled Evolutionary Energy-Performance Feedback for Design (EEPFD) was developed. This paper explores the designer as the primary user by conducting a case study where the application of EEPFD to a single family residential housing unit is incorporated. Through this case study EEPFD demonstrates an ability to assist the designer in identifying higher performing design options while meeting the designer’s aesthetic preferences. In addition the benefits, limitations, concerns and lessons learned in the application of EEPFD are also discussed.
keywords	conceptual energy-performance feedback; design decision support; parametric design; multi-disciplinary design optimization; genetic algorithm
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2013_087
id	caadria2013_087
authors	Lee, Jung Hoon and Atsuko Kaga
year	2013
title	Visual Analysis of the Relation Between Concentrated Districts of Knowledge-Based Industries and Third Places in Osaka City
doi	https://doi.org/10.52842/conf.caadria.2013.581
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 581-589
summary	Recently, as the changes in the economic structure, service industries have become an important factor of the urban regeneration. Especially, Knowledge-based industry is garnering attention as an engine of urban economics. Urban present condition such as location of Knowledge-based industry visualization and analysis are main issues for people as well as policymakers, urban planner and designers. This paper presents analysis of the spatial characteristics of the distribution and spatial concentration of Knowledge-based Industry, specifically Business-support Services. Furthermore, this paper is intended to describe examination of the visual relation between spatial conditions and configuration by visualization using GIS and space syntax analysis. This paper shows that business support services are likely to concentrate in specific places. Results of this study show that each type of business support services is concentrated in different districts. Results show that creative design industries are located near the park, riverfront, and such third places with high integration and connectivity with the street by space syntax analysis. Results show that concentrated districts of creative design companies at inner block show relatively high local integration values and connectivity. This study elucidates how industrial concentration and spatial configuration can be ascertained visually.
wos	WOS:000351496100057
keywords	Spatial analysis, Knowledge-based industry, Third place, GIS, Space syntax
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2013r_017
id	ecaade2013r_017
authors	Meghna, Saiqa I.; Chowdhury, Suvro S.
year	2013
title	Contextual customization of design process. Design through the digital and the material
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 205-216
summary	In contemporary world, digital technologies have initiated new architectural languages and have eased the way to communicate them directly from initial design phase to production facilities, allowing for the construction of complex geometries with the use of ever evolving techniques and tools. When the emergence of a substance depends on the material behavior, the design interest shifts towards the ‘formation’ instead of the ‘final form’. Regarding these the design procedures will be discussed from the premise where architecture will be perceived through an evolution process that deals with the coherent variables of elements and shifting parameters within a context. However, there are crucial questions about its application in the contexts which have lower access to contemporary technologies although digital technology has already influenced almost every aspects of the culture of the respective context. Besides, the huge production cost has limited its adaptability in many under developed and developing countries where the construction field relies mainly on traditional and low-tech methods. The paper is an effort to give attention on exploration of the new-found freedoms of material computation in close connection with the respective context by inventing new design processes, material applications and custom devices. It is the time to experiment with flexible, mobile and low-cost fabrication methods applicable to different scenarios while achieving the complexity of the contemporary architectural ge¬ometries. Thus an equal focus has to be given to speculate about projects that are site-specific, custom¬ized and adapted to local climatic conditions and technical know-how, in areas that traditionally have limited access to new technologies.
keywords	Complex geometries, material behavior, custom devices, low-cost fabrication, design process
email
last changed	2013/10/07 19:08

_id	ecaade2013_029
id	ecaade2013_029
authors	Patlakas, Panagiotis; Becerra Santacruz, Habid and Altan, Hasim
year	2013
title	Development and Evaluation of a Prototype Software Application for the Visualization of Environmental Data
doi	https://doi.org/10.52842/conf.ecaade.2013.1.137
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 137-145
summary	This paper presents EnViz, a prototype software application for the visualization of environmental data. The rationale for the development of the application is given, together with the methodology for collecting the data. A technical description of the software is provided, with a presentation of new features and their relevance. Two case studies are presented, and their relevance in the testing of the software is discussed. Visualization results from the application of the software are included. Particular attention is paid to the testing and evaluation of the application by real users. The methodological approach is described and the results of the tests are presented. The paper concludes by interpreting the results and pointing towards directions for further research on the topic.
wos	WOS:000340635300013
keywords	3D visualization; building performance; COLLADA; environmental data; post-occupancy evaluation.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia13_269
id	acadia13_269
authors	Swackhamer, Marc; Satterfield, Blair
year	2013
title	Breaking the Mold: Variable Vacuum Forming
doi	https://doi.org/10.52842/conf.acadia.2013.269
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 269-278
summary	Our research explores the growth of surface complexity through careful attention to program and performance criteria. As this complexity emerges, however, we are repeatedly confronted with the realization that its cost compromises any of its performance gains. While the aggregation of repeatable units with variation from one unit to the next is achievable at a low cost through subtractive fabrication technologies (CNC milling, laser cutting, waterjet cutting), it is more difficult to achieve through casting or forming technologies (concrete casting, injection molding, vacuum forming). This is because formwork is not adaptable. Once you produce a mold, typically at a high cost, that mold makes one component only. If you want variation, a new mold must be produced for each new component. With the projects Hexwall and VarVac Wall we put forward a simple question: can an intelligent, adaptable vacuum-forming mold be developed that allows for difference from one component to another without the necessity for multiple molds? The research positions our design efforts strategically at the front end of the fabrication process. Our goal is to develop a malleable tool that allows for endless variation in a fabrication process where variation is typically impractical.
keywords	tools and interfaces; vacuum forming, variable, plastic, fabrication, surface, custom tools
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ascaad2014_016
id	ascaad2014_016
authors	Al-Ratrout, Samer A. and Rana Zureikat
year	2014
title	Pedagogic Approach in the Age of Parametric Architecture: Experimental method for teaching architectural design studio to 3rd year level students
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 211-226
summary	In this era, Architectural Design Practice is faced with a paradigm shift in its conventional approaches towards computational methods. In this regard, it is considered a pedagogic challenge to boost up knowledge and skills of architectural students’ towards an advanced approach of architectural design that emphasizes the potentials and complexity of computational environments and parametric tools for design problem solving. For introducing the concept of Parametric Oriented Design Methods to 3rd year level architectural students, an experimental pedagogic course was designed in the scholastic year of 2012-2013 at German Jordanian University GJU (School of Architecture and Built Environment SABE) to approach this concept. In the preparation phase, the experimental course was designed to incorporate structured instructing and training method to be consecutively performed within experimental lab environment to target predetermined learning outcomes and goals. The involved students were intentionally classified into three levels of previous involvement associated with the related software operating skills and computational design exposure. In the implementation phase, the predetermined instructing and training procedures were performed in the controlled environment according to the planned tasks and time intervals. Preceded tactics were prepared to be executed to resolve various anticipated complication. In this phase also, students’ performance and comprehension capacity were observed and recorded. In data analysis phase, the observed results were verified and correlations were recognized. In the final phase, conclusions were established and recommendations for further related pedagogic experiments were introduced.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
doi	https://doi.org/10.52842/conf.caadria.2014.285
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2013_021
id	caadria2013_021
authors	Alhadidi, Suleiman
year	2013
title	Generative Design Intervention: Creating a Computational Platform for Sensing Space
doi	https://doi.org/10.52842/conf.caadria.2013.345
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 345-354
summary	This paper outlines some investigations from a project which utilizes computing and scripting of specific site components, spatio-temporal movement and behavioural patterns to explore how designer might understand people activities and formulate design interventions within public spaces. This research looks at how generative tools can facilitate designers to integrate the large volume of information received by hybrid data collection, and conventional data analysis directly into the design process. Through an examination of sensing urban space, this research proposes a method to track and record people’s movement patterns in order to implement them via generative design tool. To facilitate this, a scripting method is specified; which uses sensors and motion tracking devices to capture the use of a specific public space. This project proposes a methodology for developing designed spaces and optimal pathways generated from real-time data and feedback captured by sensors.
wos	WOS:000351496100034
keywords	Real-time computation, Generative design, Sensing space, Design simulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2013_117
id	sigradi2013_117
authors	Alves Veloso, Pedro L.; Anja Pratschke
year	2013
title	Uma Arqueologia de Diagramas Cibernéticos [An Archaeology of Cybernetic Diagrams]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 353 - 356
summary	This paper investigates the use of explicit structures of information in architectural design. Particularly, it approaches the use of diagrams related to cybernetics and information theory in experimental practices in the 1960’s and 1970’s. It analyses the diagram of cybernetic control proposed by the cybernetician Gordon Pask for the Fun Palace, the diagrams produced by the utopian architect Yona Friedman in the conceptual description of the Flatwriter program and Christopher Alexander’s diagrams and his theories of Synthesis of Form and Pattern Language. Finally it establishes a brief parallel between current domestication and use of dataflow programming with the cybernetic diagrams, highlighting differences in their complexity approach.
keywords	Dataflow diagrams; Cybernetics; Complexity
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_101
id	sigradi2013_101
authors	Alves, Gilfranco; Anja Pratschke
year	2013
title	Processos de Projeto Cibersemióticos: Procedimentos de Observação, Representação e Performance Aplicados ao Design Paramétrico [Cybersemiotic Design Processes: Observation, Representation and Performance Proceedings Applied on Parametric Design]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 258 - 261
summary	The abstract presented here is part of a PhD research in progress, currently developed at USP - University of São Paulo, with the Nomads.usp research group, under the guidance of Professor Anja Pratschke. This research starts from the assumption that Cybersemiotics, initially defined by the Philosopher and Information Scientist Dr. Søren Brier - and therefore gathers concepts of Second Order Cybernetics and Semiotics of Charles Sanders Peirce - while meta-theory designed and developed to promote transdisciplinarity, can bring other perspectives and base updated reflections in order to produce a framework for architectural design processes that make use of digital mediation, especially Parametric Design.
keywords	Cybersemiotics; Cybernetics; Peircean semiotics; Performance; Parametric design
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: