Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 22

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2013_009
id	ecaade2013_009
authors	Cutellic, Pierre and Lotte, Fabien
year	2013
title	Augmented Iterations
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 393-401
doi	https://doi.org/10.52842/conf.ecaade.2013.1.393
wos	WOS:000340635300041
summary	The principle of Augmented Iterations is to create shapes of progressively higher complexity, thanks to a fast neuronal selection of shapes among several possible evolving designs. Such a process is made possible by the use of a brain signal known as P300, which appears when a user perceives a rare and relevant stimulus and can be used for intricate pattern recognition and human computation systems. We aim at using this P300 signal to identify the (re)cognition of shapes or designs that a user finds almost instantaneously relevant and noticeable, when exposed to a rapid visual flow of variations of such shapes or designs. Using evolutionary algorithms, the shapes identified as those triggering a P300 in the user’s EEG signals is selected and combined to give rise to geometrical aggregations of a higher complexity. These new shapes replace the previous ones in the rapid flow of variations presented to the user, hence iterating the evolutionary design.
keywords	Neurodesign; generative design; integrated cognition; evolutionary computation.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia14_473
id	acadia14_473
authors	Cutellic, Pierre
year	2014
title	Le Cube d'Après, Integrated Cognition for Iterative and generative Designs.
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 473-478
doi	https://doi.org/10.52842/conf.acadia.2014.473
summary	This paper describes the work in progress of a research on Neurodesign and a previously described process entitled Augmented Iterations [Cutellic and Lotte, 2013]. Within this broader field of research and design explorations, we will focus on describing and comment results obtained in the neuroselection of shapes among a continuously varying flow of visual stimuli. Eventually, these results will lead to the identification of a non-linear and non-convergent potential for the human-based computation of iterative and generative designs.
keywords	Human Computer Interaction, Augmented Iteration, Neurodesign, Generative Design, Integrated Cognition, Evolutionary Computation, Design Computing and Cognition
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	ecaade2013_096
id	ecaade2013_096
authors	Achten, Henri
year	2013
title	Buildings with an Attitude
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 477-485
doi	https://doi.org/10.52842/conf.ecaade.2013.1.477
wos	WOS:000340635300050
summary	In order to achieve interactive architecture it is necessary to consider more than the technological components of sensors, controllers, and actuators. The interaction can be focused to different interaction activities: instructing, conversing, manipulating, and exploring (we propose to call this the interaction view). Additionally, the purpose of the building may range from performing, sustaining, servicing, symbolising, to entertaining (we propose to call this the world view). Combined, the interaction view and world view establish 20 different attitudes, which are flavours of behaviour for the interactive building. Through attitudes interaction profiles can be established and criteria derived for the design of interactive buildings.
keywords	Interactive architecture; design theory; Human-Computer Interaction; augmented reality; mixed reality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2013_135
id	sigradi2013_135
authors	Borges de Vasconselos, Tássia; Adriane Borda Almeida da Silva
year	2013
title	Identificação de Geometrias Implícitas na Arquitetura a Partir de Realidade Aumentada [Alignment Identification of Implicit Geometries in Architecture from Augmented Reality]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 44 - 48
summary	For the initial stages of architectural training one of the strategies traditionally used is to study design cases. This exercise can help in the comprehension of implicit geometries and design processes. The use of the golden ratio, for example, is recurrent in the history of architecture. However, adequate instruments are necessary for this kind of statement. This paper demonstrates the use of Augmented Reality with this goal: virtual elements are viewed overlaying the architecture or its representation, configuring a “digital proportion measurer”. The comprehension of known architectural practices assists in structuring methods and constructing repertoires for architectural design.
keywords	Architecture analysis; Geometry; Augmented reality; Digital proportion measurer
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2013_342
id	sigradi2013_342
authors	Bruscato, Underléa; Sandro J. Rigo; Cristiano A. Costa; Humberto J. M. Costa
year	2013
title	Visualização de Informações Geográficas no Turismo Ubíquo de Itinerários Culturais [Visualization of Geographic Information of Ubiquitous Tourism in Cultural Routes]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 153 - 157
summary	This paper presents a practical experience developed within the framework of a network of researchers dedicated to develop projects of technology transfer, training and research in the field of innovation, involving virtual reality, augmented reality and advanced interaction. The group develops visualization oriented technologies and aim to socialize the experiences developed. In this sense was created an Electronic Guide to cultural routes in southern Brazil, exploiting the contemporary concept of ubiquitous tourism, in which users access tourism content with mobile devices, using sensitivity to context, semantic web and advanced visualization, thus rescuing the memory and regional architectural heritage.
keywords	Ubiquitous tourism; Mobile computing, Memory
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2013r_001
id	ecaade2013r_001
authors	Carreiro, Miguel; Pinto, Pedro
year	2013
title	The evolution of representation in architecture
source	FUTURE TRADITIONS [1st eCAADe Regional International Workshop Proceedings / ISBN 978-989-8527-03-5], University of Porto, Faculty of Architecture (Portugal), 4-5 April 2013, pp. 27-38
summary	This paper proposes an overview on the relation between representation, technology and architecture methodologies. Focusing on disposable digital tools, it reaches the new tools of virtual immersive 3D architectural environments. It also addresses the concepts of operative 3D, augmented reality and robotic manufacturing, thus introducing a system of digital tools that enables users to step inside a 3D virtual reality environment, built as a virtual building prototype, and to use all data instructions directly with the construction industry. This paper questions therefore the traditional processes and perceptions in architecture and draw present and future advanced state-of-the-arts methodologies. As a result, future and tradition in architectural design methods are challenged. Recognizing the permanent tensions between traditional and innovative processes, possible methodological changes are put in perspective, namely the fields of technical representation, building construction and design processes.
keywords	Architecture; Representation; Technology; 3D; Methodology
email
last changed	2013/10/07 19:08

_id	ecaade2013_193
id	ecaade2013_193
authors	Duddumpudi, Krishna; Moloney, Jules and Moleta, Tane
year	2013
title	Whispering Walls
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 1, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 507-516
doi	https://doi.org/10.52842/conf.ecaade.2013.1.507
wos	WOS:000340635300053
summary	A design project that explores how augmented reality may be incorporated within architecture to embed hybrid ‘info-tectonic’ detail, across a range of scales is documented. The context in which the project is undertaken is the legacy of South Indian temple design. This opens up a complimentary field of research within a cultural context, to locate another agenda for augmented reality in architecture. The idea of cultural augmentation and its articulation at a range of scales, from the tactile to the urban, was generated through the design project. By way of introduction this mode of research is discussed in relation to CAAD research methods. In conclusion, a general model for cultural augmentation with augmented reality as a scalar continuum is presented.
keywords	Augmented reality, cultural augmentation, research through design.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2013_043
id	caadria2013_043
authors	Freitas, Márcia Regina de and Regina Coeli Ruschel
year	2013
title	What is Happening to Virtual and Augmented Reality Applied to Architecture?
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 407-416
doi	https://doi.org/10.52842/conf.caadria.2013.407
wos	WOS:000351496100040
summary	This paper presents the results of a comprehensive survey of activities on research and development of Virtual and Augmented Reality applied to architecture. 200 papers were reviewed, taken from annual conferences of the Association for Computer Aided Design In Architecture (ACADIA) and its sibling organizations in Europe (ECAADE and CAAD Futures), Asia (CAADRIA), the Middle East (ASCAAD) and South America (SIGRADI). The papers were grouped in research areas (design method, architectural theory and history, performance evaluation, human interaction, representation and process & management), emphasis (education, application, collaboration, visualization, practice and theory) and technology development stage (specification, development, application demonstration and evaluation). The period of study comprises 11 years, from 2000 to 2011. Findings for each category are described and key publications and authors are identified.
keywords	Virtual reality, Augmented reality, Study of activity
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2013_32
id	sigradi2013_32
authors	Furuno Rimkus, Carla M.; Fernando de Medeiros Galvão
year	2013
title	Realidade Aumentada: Visualização Tridimensional e Interatividadena Documentação do PatrimônioArquitetônico [Augmented Reality: Three-Dimensional Visualization and Interaction in Architectural Heritage Documentation]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 186 - 189
summary	This paper presents preliminary results from an outgoing research about the Scholarship Program on Technological Development and Innovation (PIBITI), in which we focused the potentiality of Augmented Reality (AR) application on documentation of the architectural heritage according to the UNESCO principles. We took as the object of study of the “Quarteirão dos Trapiches”, one of the historic buildings in Laranjeiras, Sergipe, Brazil, and we reconstructed it digitally with Augmented Reality and subsequently generate a QR Code information associated with this building, available on a website. In this context, this work highlight the potential application of architectural heritage documentation in AR, where discourse about the digital processing RA we use, and the association of this digital model with a history of the building. Finally, we present our conclusions on the use of RA in shareholders highlighting the advantages of three-dimensional visualization of architectural heritage, in an interactive, dynamic and low cost of deployment, pondering the importance of encouraging a policy of initiating development activities and technological innovation to digital architectural documentation.
keywords	Augmented reality; Architectural heritage; Heritage education
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
doi	https://doi.org/10.52842/conf.caadria.2014
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	caadria2013_080
id	caadria2013_080
authors	Koh, Immanuel
year	2013
title	Computer Vision and Augmented Reality Technologies in Experimental Architectural Design Education at the AA
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 427-436
doi	https://doi.org/10.52842/conf.caadria.2013.427
wos	WOS:000351496100042
summary	This paper aims to investigate the potential of both open source software and new media (esp. computer vision and augmented reality) as tools for architectural design and education. The examples illustrated in the paper would be drawn mainly from students’ projects done as part of their AA Media Studies Course submission at the AA School of Architecture (AA) during the academic years from 2011/2012 to 2012/2013. The paper outlines the main approaches, which students have chosen to implement, both directly and indirectly, these new media and tools into their studio work at the AA. Section 1 briefly introduces a range of currently available open source computational design toolkits that are deemed useful for quick implementation of computer vision and augmented reality technologies. The related programming languages, softwares and hardwares would also be introduced and described accordingly. Sections 2 and 3 are accompanied with a visual catalogue of students’ projects to better illustrate the diversity in the understanding and implementation of computer vision and augmented reality technologies in architectural design. Section 4 serves to conclude the paper by first discussing briefly the feedback from students at the end of the course before clarifying the context of the research and thus its relation to recent work done by others using similar technologies.
keywords	Computer vision, Augmented reality, Generative design, Interaction design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia13_425
id	acadia13_425
authors	Moukheiber, Carol
year	2013
title	Sensual Embodiment: When Morphological Computation Shapes Domestic Objects
source	ACADIA 13: Adaptive Architecture [Proceedings of the 33rd Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-1-926724-22-5] Cambridge 24-26 October, 2013), pp. 425-426
doi	https://doi.org/10.52842/conf.acadia.2013.425
summary	IM BLANKY (2011) and CURTAIN (2013) are augmented textile prototypes set within the context of the domestic environment. The projects are informed by the concept of embodiment within the field of artificial intelligence (AI).
keywords	embodiment, IM BLANKY, CURTAIN, textile, shape-memory alloy
series	ACADIA
type	Research Poster
email
last changed	2022/06/07 07:58

_id	ecaade2016_154
id	ecaade2016_154
authors	Ozer, Derya Gulec and Nagakura, Takehiko
year	2016
title	Simplifying Architectural Heritage Visualization - AUGMENTEDparion
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 521-528
doi	https://doi.org/10.52842/conf.ecaade.2016.2.521
wos	WOS:000402064400052
summary	Among other historical artifacts, architectural heritage is the most difficult to present in museums. There is a need for a high-tech visualization of cultural heritage since it is important to visualize, share and analyze data for stakeholders such as historians, archaeologists, architects and tourists. This study aims to represent architectural heritage in terms of photogrammetry and AR methods for the Parion Theater, Biga, Turkey, dates back to 1st-2nd century A.D. and has been under excavation since 2005. The study uses MULTIRAMA, a method previously developed by ARC Team (MIT) in 2013, which aims to represent the "unseen" to such users by visualising and documenting via an app. The method supports architectural heritage representation via the processes of, i) documentation, ii) data process and modeling, and iii) presentation. This holistic and low cost approach will focus on the problem of visualizing the digital architectural heritage, and led light to future projects of a historical visualization database throughout Turkey.
keywords	Augmented Reality (AR); Cultural Heritage; Photogrammetry; Parion
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2014_252
id	sigradi2014_252
authors	Pina Calafi, Alfredo; Benoit Bossavit, Isabel Sanchez Gil, Aitziber Urtasun, Benoit Bossavit
year	2014
title	Oteiza en movimiento: una herramienta tecnológica para el aprendizaje participativo en el Museo Oteiza [Oteiza in motion a tool for a collaborative learning at the Oteiza museum]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 255-258
summary	This paper presents an interdisciplinary work done at the Museum Oteiza near Pamplona, Spain during 2012 and 2013. The main goal is the use of low cost devices that allows natural interaction, Virtual and Augmented Realities to get the general public closer to the works and concepts of Oteiza through interactive serious games. The most difficult Oteiza’s concepts to understand are those related with the empty space or with time & space. We propose three different activities, shaped as serious game, that use the whole body to interact and play with these concepts. The result is a facility that has been installed at the entrance of the Museum and that can be used for free, before or after a visit to the museum. These activities were presented to 4 experts in Oteiza and the results are discussed. In addition, we gathered more comments after several groups of children tried the application in the museum.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2019_342
id	caadria2019_342
authors	Qureshi, Cyrus, Moleta, Tane Jacob and Schnabel, Marc Aurel
year	2019
title	Beyond the portal - A Study of the Tangible and Intangible Rituals within Sacred Spaces
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 525-534
doi	https://doi.org/10.52842/conf.caadria.2019.1.525
summary	In its ambitions, the paper aims to propose a proof of concept for a Virtual, Augmented and Mixed (VAM) environment that digitally overlays a multifaith space in order to optimize their use, essentially transforming itself to the spiritual needs of the user. In order to do so, a mixed reality experience was developed by investigating and interpreting both the tangible and intangible rituals of prayer. By incorporating an immersive experience, the project promotes the idea of a multifaith space that moves beyond the notion of an "empty white room (Crompton, 2013, p.487)". To develop an immersive experience that caters to people of all religions or no religion is beyond the scope of this project. Hence, by creating a VAM environment for users of the Muslim faith the project may be able to support design ideologies for others, furthering research in this field.
keywords	Tangible and Intangible Rituals; Multifaith Space; Mixed Reality; Digital Mosque
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	caadria2013_263
id	caadria2013_263
authors	Salim, Flora; Jane Burry and Jenny Underwood
year	2013
title	Augmenting Public Spaces with Live Forms and Fabrics – Integrating Mechatronics and Textiles to Provoke Social Interactions in Public Spaces
source	Open Systems: Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013) / Singapore 15-18 May 2013, pp. 965-974
doi	https://doi.org/10.52842/conf.caadria.2013.965
wos	WOS:000351496100099
summary	The research reported in this paper aims to investigate the potential of integrating live forms and fabrics to enable social interactions at existing public sites as a brief for a transdisiciplinary student design project. Through the use of flexible and modular design and fabrication methods, mechatronics, and smart materials and textiles, existing public sites were augmented with interactive installations by groups of students coming together from multiple cognate design disciplines spanning public art to engineering and including textile design.
keywords	Interactive architecture, Textiles, Microelectronics, Full-scale prototyping, Public space
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2013_358
id	sigradi2013_358
authors	Schneid, Geovana; Andrew Escobar; Adriane Borda
year	2013
title	Realidade Aumentada e Turismo Ubíquo: Aplicação no Caso das Charqueadas Pelotenses [Augmented Reality and Ubiquitous Tourism: Application in Case of the Charqueadas Pelotenses]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 190 - 194
summary	This paper describes a process of development of three-dimensional virtual models to be viewed in augmented reality through mobile devices. It considers the concept of ubiquitous tourism applied to the tourist rout “the path to the jerked beef farms of Pelotas”, RS. Thus, overlapping models of the buildings related to the history of the jerked beef farms, over the real environment, respond to a specific demand of the place. Most of these places do not allow access or demand a virtual reconstruction.
keywords	Augmented reality; Charqueadas pelotenses; Tourism ubiquitous; Mobile devices; Georeferencing
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ecaade2023_317
id	ecaade2023_317
authors	Zamani, Alireza, Mohseni, Alale and Bertug Çapunaman, Özgüç
year	2023
title	Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 387–396
doi	https://doi.org/10.52842/conf.ecaade.2023.1.387
summary	Robotic additive manufacturing has garnered significant research and development interest due to its transformative potential in architecture, engineering, and construction as a cost-effective, material-efficient, and energy-saving fabrication method. However, despite its potential, conventional approaches heavily depend on meticulously optimized work environments, as robotic arms possess limited information regarding their immediate surroundings (Bechthold, 2010; Bechthold & King, 2013). Furthermore, such approaches are often restricted to planar build surfaces and slicing algorithms due to computational and physical practicality, which consequently limits the feasibility of robotic solutions in scenarios involving complex geometries and materials. Building on previous work (Çapunaman et al., 2022), this research investigates conformal 3D printing of clay using a 6 degrees-of-freedom robot arm and a vision-based sensing framework on parametrically reconfigurable tensile hyperbolic paraboloid (hypar) formwork. In this paper, we present the implementation details of the formwork system, share findings from preliminary testing of the proposed workflow, and demonstrate application feasibility through a design exercise that aims to fabricate unique components for a poly-hypar surface structure. The formwork system also offers parametric control over generating complex, non-planar tensile surfaces to be printed on. Within the scope of this workflow, the vision-based sensing framework is employed to generate a digital twin informing iterative tuning of the formwork geometry and conformal toolpath planning on scanned geometries. Additionally, we utilized the augmented fabrication framework to observe and analyze deformations in the printed clay body that occurs during air drying. The proposed workflow, in conjunction with the vision-based sensing framework and the reconfigurable formwork, aims to minimize time and material waste in custom formwork fabrication and printing support materials for complex geometric panels and shell structures.
keywords	Robotic Fabrication, Conformal 3D Printing, Additive Manufacturing, Computer-Vision, Reconfigurable Formwork
series	eCAADe
email
last changed	2023/12/10 10:49

For more results click below: